On a Future for Power Electronics

This paper presents a historical and philosophical perspective on a possible future for power electronics. Technologies have specific life cycles that are driven by internal innovation, subsequently reaching maturity. Power electronics appears to be a much more complex case, functioning as an enabling technology spanning an enormous range of power levels, functions and applications. Power electronics is also divided into many constituent technologies. Till now, the development of power electronics has been driven chiefly by internal semiconductor technology and converter circuit technology, approaching maturity in its internally set metrics, such as efficiency. This paper examines critically the fundamental functions found in electronic energy processing, the constituent technologies comprising power electronics, and the power electronics technology space in light of the internal driving philosophy of power electronics and its historical development. It is finally concluded that, although approaching the limits of its internal metrics indicates internal maturity, the external constituent technologies of packaging, manufacturing, electromagnetic and physical impact, and converter control technology still present remarkable opportunities for development. As power electronics is an enabling technology, its development, together with internal developments, such as wide bandgap semiconductors, will be driven externally by applications in the future.

[1]  Paolo Tenti,et al.  Power electronics' polluting effects , 1997 .

[2]  Hendrik Rissik.  Mercury-Arc Current Convertors : An Introduction to the Theory and Practice of Vapour-ARC Discharge Devices and to the Study of Rectification Phenomena , 1935 .

[3]  J.D. van Wyk,et al.  Integrating active, passive and EMI-filter functions in power electronics systems:a case study of some technologies , 2005, IEEE Transactions on Power Electronics.

[4]  Fred C. Lee,et al.  High-Frequency High Power Density 3-D Integrated Gallium-Nitride-Based Point of Load Module Design , 2013, IEEE Transactions on Power Electronics.

[5]  Adolf Muller-Hellmann,et al.  Power electronics, control of the electromechanical energy conversion process and some applications , 1986 .

[6]  H. Rissik.  The fundamental theory of arc convertors : a theoretical study of the principles underlying the design and operation of arc convertor circuits , 1939 .

[7]  Peng Xu,et al.  Investigation of candidate VRM topologies for future microprocessors , 2000 .

[8]  S. Waffler,et al.  Performance trends and limitations of power electronic systems , 2010, 2010 6th International Conference on Integrated Power Electronics Systems.

[9]  Holmes,et al.  Pulse width modulation for power converters , 2003 .

[10]  J. D. van Wyk,et al.  Power electronic converters for motion control , 1994, Proc. IEEE.

[11]  F.C. Lee,et al.  An integrated approach to power electronics systems , 2002, Proceedings of the Power Conversion Conference-Osaka 2002 (Cat. No.02TH8579).

[12]  A. Glaser,et al.  Einführung in die Theorie der Stromrichter , 1935 .

[13]  J.D. Van Wyk,et al.  Design of planar integrated passive module for zero-voltage switched asymmetrical half bridge PWM converter , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[14]  F.C. Lee,et al.  System design of a 3D integrated non-isolated Point Of Load converter , 2008, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition.

[15]  Jun-ichi Itoh,et al.  Special Issue on Power Electronics , 2012 .

[16]  Fred C. Lee,et al.  Embedded power technology for IPEMs packaging applications , 2001, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181).

[17]  T. G. Wilson,et al.  The evolution of power electronics , 1992, Proceedings of the IEEE International Symposium on Industrial Electronics.

[18]  J. W. McRae.  Transistors in Our Civilian Economy , 1952, Proceedings of the IRE.

[19]  Chris Park,et al.  The Environment , 2010 .

[20]  F. C. Lee,et al.  Matrix transformer for LLC resonant converters , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[21]  F. C. Lee,et al.  Low profile LTCC inductor substrate for multi-MHz integrated POL converter , 2012, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[22]  Bimal K. Bose,et al.  Recent advances in power electronics , 1990, [Proceedings] IECON '90: 16th Annual Conference of IEEE Industrial Electronics Society.

[23]  J. Popović-Gerber,et al.  Quantifying the Value of Power Electronics in Sustainable Electrical Energy Systems , 2011, IEEE Transactions on Power Electronics.

[24]  J.D. van Wyk,et al.  Planar electromagnetic integration technologies for integrated EMI filters , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..

[25]  van Wyk.  Power Electronic Converters for Drives , 2013 .

[26]  Bantval J. Baliga,et al.  The future of power semiconductor device technology , 2001, Proc. IEEE.

[27]  L. B. Valdes,et al.  Effect of Electrode Spacing on the Equivalent Base Resistance of Point-Contact Transistors , 1952, Proceedings of the IRE.

[28]  Thomas A. Lipo,et al.  Pulse Width Modulation for Power Converters: Principles and Practice , 2003 .

[29]  Fred C. Lee,et al.  Multi-phase adaptive on-time PFC for better light load efficiency and EMI performance , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[30]  C. Frankel.  The environment [Electronics industry aspects] , 1996, IEEE Spectrum.

[31]  Dushan Boroyevich,et al.  Technology Trends toward a System-in-a-Module in Power Electronics Technology Trends toward a System-in-a-Module in Power Electronics , 2002 .

[32]  Jan Abraham Ferreira,et al.  Engineering science considerations for integration and packaging , 2000, 2000 IEEE 31st Annual Power Electronics Specialists Conference. Conference Proceedings (Cat. No.00CH37018).

[33]  Marian P. Kazmierkowski,et al.  Control in Power Electronics , 2013 .

[34]  A. Consoli,et al.  The future of electronic power processing and conversion , 2005, IEEE Transactions on Industry Applications.

[35]  J.D. Van Wyk,et al.  Power electronics technology at the dawn of the new millenium-status and future , 1999, 30th Annual IEEE Power Electronics Specialists Conference. Record. (Cat. No.99CH36321).

[36]  T. G. Habetler,et al.  Power electronic converter and system control , 2001 .

[37]  D. Boroyevich,et al.  A future approach to integration in power electronics systems , 2003, IECON'03. 29th Annual Conference of the IEEE Industrial Electronics Society (IEEE Cat. No.03CH37468).

[38]  J.D. van Wyk,et al.  Application of structural winding capacitance cancellation for integrated EMI filters by embedding conductive layers , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[39]  Edward L. Owen,et al.  AC Adjustable-Speed Drives with Electronic Power Converters-the Early Days , 1984, IEEE Transactions on Industry Applications.

[40]  David Reusch,et al.  High Frequency, High Power Density Integrated Point of Load and Bus Converters , 2012 .

[41]  F. D. Tan,et al.  A unified approach to characterization of PWM and quasi-PWM switching converters: topological constraints, classification and synthesis , 1989, 20th Annual IEEE Power Electronics Specialists Conference.

[42]  F. Lee,et al.  Gallium Nitride based 3D integrated non-isolated point of load module , 2012, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[43]  Jd van Wyk,et al.  Power- and machine-electronics 1914-1966:a selected bibliography and review on the electronic control of electrical machines , 1966 .

[44]  F. Gentry,et al.  High power semiconductor devices , 1965 .

[45]  Shi-Peng Huang,et al.  Novel high frequency quasi-resonant converter topologies , 1991, China., 1991 International Conference on Circuits and Systems.

[46]  H J. Van der Bijl,et al.  The Thermionic Vacuum Tube and Its Applications , 2005 .

[47]  F. Lee,et al.  High-frequency quasi-resonant and multi-resonant converter technologies , 1988, Proceedings.14 Annual Conference of Industrial Electronics Society.

[48]  A. A. Jaecklin.  Future devices and modules for power electronic applications , 2002 .

[49]  Frede Blaabjerg,et al.  Control in Power Electronics , 2002 .

[50]  F. C. Lee,et al.  High frequency high power density 3D integrated Gallium Nitride based point of load module , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[51]  T. S. Perry.  The environment [Technology 2000 analysis and forecast] , 2000 .