3-D lithography and metal surface micromachining for RF and microwave MEMS

A new metal surface micromachining technology utilizing 3-D lithography, electroplating, and mechanical polishing has been developed to fabricate arbitrary 3-D metal microstructures as post-IC processes at low temperature below 120/spl deg/C. Using this technology, various highly-suspended 3-D microstructures have been successfully demonstrated for RF and microwave MEMS applications. We have fabricated spiral inductors suspended 100 /spl mu/m over the substrate, coplanar waveguides suspended 50 /spl mu/m over the substrate, and complicated micro-coaxial lines which have 50 /spl mu/m-suspended center signal lines surrounded by ground shields of 100 /spl mu/m in height.

[1]  Martina Rothe,et al.  Application of ultraviolet depth lithography for surface micromachining , 1995 .

[3]  Jane M. Shaw,et al.  Micromachining applications of a high resolution ultrathick photoresist , 1995 .

[4]  Euisik Yoon,et al.  High-performance three-dimensional on-chip inductors fabricated by novel micromachining technology for RF MMIC , 1999, IMS 1999.

[5]  E. Yoon,et al.  Monolithic high-Q overhang inductors fabricated on silicon and glass substrates , 1999 .

[6]  Gabriel M. Rebeiz,et al.  Micromachined devices for wireless communications , 1998, Proc. IEEE.

[7]  Euisik Yoon,et al.  High-performance electroplated solenoid-type integrated inductor (SI/sup 2/) for RF applications using simple 3D surface micromachining technology , 1998 .

[8]  Euisik Yoon,et al.  Monolithic Fabrication of Electroplated Solenoid Inductors Using Three-Dimensional Photolithography of a Thick Photoresist , 1998 .

[9]  R. J. Richards,et al.  MEMS for RF/Microwave wireless applications: The next wave- Part II , 2001 .

[10]  Jun-Bo Yoon,et al.  Surface micromachined solenoid on-Si and on-glass inductors for RF applications , 1999, IEEE Electron Device Letters.

[11]  Jun-Bo Yoon,et al.  Monolithic integration of 3-D electroplated microstructures with unlimited number of levels using planarization with a sacrificial metallic mold (PSMM) , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[12]  Mark G. Allen,et al.  Micromachined high Q inductors for high-frequency applications , 1998, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[13]  E. Yoon,et al.  CMOS-compatible surface-micromachined suspended-spiral inductors for multi-GHz silicon RF ICs , 2002 .

[14]  H. Reichl,et al.  Fabrication of high depth-to-width aspect ratio microstructures , 1992, [1992] Proceedings IEEE Micro Electro Mechanical Systems.

[15]  J. Jason Yao,et al.  RF MEMS from a device perspective , 2000 .

[16]  Mark G. Allen,et al.  Surface micromachined solenoid inductors for high frequency applications , 1997 .

[17]  A. B. Frazier,et al.  Metallic microstructures fabricated using photosensitive polyimide electroplating molds , 1993 .

[18]  Euisik Yoon,et al.  Multilevel microstructure fabrication using single-step 3D photolithography and single-step electroplating , 1998, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[19]  Jaehyok Yi,et al.  Optimum design for linearity and efficiency of a microwave doherty amplifier using a new load matching technique , 2001 .

[20]  E. Yoon,et al.  Monolithic integration of 3-D electroplated microstructures with unlimited number of levels using planarization with a sacrificial metallic mold (PSMM) , 1999 .

[21]  H. Guckel,et al.  High-aspect-ratio micromachining via deep X-ray lithography , 1998, Proc. IEEE.