Numerical study on the effect of pore shapes on the thermal behaviors of cellular concrete

Abstract This paper proposes a numerical method to study the effect of pore shapes on the effective thermal conductivity (ETC) of cellular concrete by a two-dimensional model. Cellular concrete can be seen as a composite of two phases with pore and cement paste. The model is established by two steps. Firstly, a generation of two-dimensional representative volume element of cellular concrete microstructure is necessary. Secondly, a finite element method is adopted to simulate heat transfer through the pixelated microstructure. Simulations are validated against analytical approximations, as well as experimental data from the literature. The model can also be used to evaluate the pore size distribution and orientation effects that are hard to measure only in laboratory experiments. It is concluded that ETC decreases when triangle pores substitute for circular pores on account that the tortuosity increases continuously. The other shapes of non-circular pores (square, pentagon and hexagon) have negligible effects on ETC. For ellipse cases, ETC decreases with increase in aspect ratio and volume fraction of pore. In the case of aligned pores, the ETC is larger along the principal axis. However, the size distribution of pores seems to have an insignificant influence. The numerical results suggest that the finite element method (FEM) considering quantitative data of thermal transfer behavior of cellular concrete can be obtained by the pore shapes, and it may be of great help to the optimization of materials.

[1]  Ning Pan,et al.  Three-dimensional effect on the effective thermal conductivity of porous media , 2007 .

[2]  Yoshito Nakashima,et al.  Mathematica Programs for the Analysis of Three-Dimensional Pore Connectivity and Anisotropic Tortuosity of Porous Rocks using X-ray Computed Tomography Image Data , 2007 .

[3]  J. J. Alvarado-Gil,et al.  Effect of the pore shape on the thermal conductivity of porous media , 2012, Journal of Materials Science.

[4]  Jian Yang,et al.  A numerical study on chloride migration in cracked concrete using multi-component ionic transport models , 2015 .

[5]  L. Alexander.  Analysis of Intensities Obtainable Using Pinhole and Slit Collimators in X‐Ray Powder Diffraction Techniques , 1950 .

[6]  J. Murthy,et al.  Direct simulation of transport in open-cell metal foam , 2006 .

[7]  Tongbeum Kim,et al.  Effective Thermal Conductivity Modelling for Closed-Cell Porous Media with Analytical Shape Factors , 2013, Transport in Porous Media.

[8]  Long-yuan Li,et al.  Prediction of chloride diffusion coefficients using multi-phase models , 2017 .

[9]  C. Wentworth.  A Scale of Grade and Class Terms for Clastic Sediments , 1922, The Journal of Geology.

[10]  Martyn Jones,et al.  Characterization and simulation of microstructure and thermal properties of foamed concrete , 2013 .

[11]  Theodore H. Bauer,et al.  A general analytical approach toward the thermal conductivity of porous media , 1993 .

[12]  Ghislain Montavon,et al.  A Two-Dimensional Heat Transfer Model for Thermal Barrier Coating Average Thermal Conductivity Computation , 2005 .

[13]  Martyn Jones,et al.  Potential Use of Foamed Mortar (FM) for Thermal Upgrading of Chinese Traditional Hui-Style Residences , 2015 .

[14]  Michael Angelo B. Promentilla,et al.  Quantification of Tortuosity in Hardened Cement Pastes using Synchrotron-based X-ray Computed Microtomography , 2009 .

[15]  Boksun Kim,et al.  Multiphase modelling of ionic transport in cementitious materials with surface charges , 2016 .

[16]  Mingzhong Zhang,et al.  Microstructure-based modeling of permeability of cementitious materials using multiple-relaxation-time lattice Boltzmann method , 2013 .

[17]  Aydin Nabovati,et al.  A general model for the permeability of fibrous porous media based on fluid flow simulations using the lattice Boltzmann method , 2009 .

[18]  Haifeng Zhang,et al.  Effectiveness of the heat conduction reinforcement of particle filled composites , 2005 .

[19]  Mohammad Ali Yazdi,et al.  Performance and properties of mortar mixed with nano-CuO and rice husk ash , 2016 .

[20]  Rolf Landauer,et al.  The Electrical Resistance of Binary Metallic Mixtures , 1952 .

[21]  Zhang Yunsheng,et al.  Using the ultrasonic wave transmission method to study the setting behavior of foamed concrete , 2014 .

[22]  Wei She,et al.  Three-dimensional numerical modeling and simulation of the thermal properties of foamed concrete , 2014 .

[23]  Rupert J. Myers,et al.  X-ray microtomography shows pore structure and tortuosity in alkali-activated binders , 2012 .

[24]  E. Cox.  A method of assigning numerical and percentage values to the degree of roundness of sand grains , 1927 .

[25]  K. Ramamurthy,et al.  A classification of studies on properties of foam concrete , 2009 .

[26]  S. Shtrikman,et al.  A Variational Approach to the Theory of the Effective Magnetic Permeability of Multiphase Materials , 1962 .

[27]  Stephan Kröner,et al.  Determination of minimum pixel resolution for shape analysis: Proposal of a new data validation method for computerized images , 2013 .

[28]  Jin Xia,et al.  Ionic transport features in concrete composites containing various shaped aggregates: a numerical study , 2018 .

[29]  Frederick G. Tickell.  The Examination of Fragmental Rocks , 2015 .

[30]  P. McDonald,et al.  Lattice Boltzmann simulations of the permeability and capillary adsorption of cement model microstructures , 2012 .

[31]  G. E. Archie.  The electrical resistivity log as an aid in determining some reservoir characteristics , 1942 .

[32]  D. Baillis,et al.  Numerical investigation of conductive heat transfer in high-porosity foams , 2009 .

[33]  Long-yuan Li,et al.  Effect of carbonation on release of bound chlorides in chloride-contaminated concrete , 2016 .

[34]  N. Pan,et al.  Modeling and prediction of the effective thermal conductivity of random open-cell porous foams , 2008 .

[35]  Ramazan Demirboga,et al.  A novel material for lightweight concrete production , 2009 .