Ride Blending Control for Electric Vehicles

Vehicles equipped with in-wheel motors (IWMs) feature advanced control functions that allow for enhanced vehicle dynamics and stability. However, these improvements occur to the detriment of ride comfort due to the increased unsprung mass. This study investigates the driving comfort enhancement in electric vehicles that can be achieved through blended control of IWMs and active suspensions (ASs). The term “ride blending”, coined in a previous authors’ work and herein retained, is proposed by analogy with the brake blending to identify the blended action of IWMs and ASs. In the present work, the superior performance of the ride blending control is demonstrated against several driving manoeuvres typically used for the evaluation of the ride quality. The effectiveness of the proposed ride blending control is confirmed by the improved key performance indexes associated with driving comfort and active safety. The simulation results refer to the comparison of the conventional sport utility vehicle (SUV) equipped with a passive suspension system and its electric version provided with ride blending control. The simulation analysis is conducted with an experimentally validated vehicle model in CarMaker® and MATLAB/Simulink co-simulation environment including high-fidelity vehicle subsystems models.

[1]  Patrick Gruber,et al.  Optimal braking force allocation for a four-wheel drive fully electric vehicle , 2014, J. Syst. Control. Eng..

[2]  Y. Hori,et al.  Rolling stability control of in-wheel electric vehicle based on two-degree-of-freedom control , 2008, 2008 10th IEEE International Workshop on Advanced Motion Control.

[3]  Yoichi Hori,et al.  Pitch Motion Control without Braking Distance Extension considering Load Transfer for Electric Vehicles with In-Wheel Motors (産業計測制御研究会 産業計測制御一般) , 2012 .

[4]  Yutao Luo,et al.  Study on the Dynamics of the In-Wheel Motor System , 2012, IEEE Transactions on Vehicular Technology.

[5]  Aldo Sorniotti,et al.  Torque Vectoring for Electric Vehicles with Individually Controlled Motors: State-of-the-Art and Future Developments , 2012 .

[6]  Valentin Ivanov,et al.  Experimental investigations on continuous regenerative anti-lock braking system of full electric vehicle , 2016 .

[7]  Andrés Eduardo Rojas Rojas,et al.  Comfort and Safety Enhancement of Passenger Vehicles with In-Wheel Motors , 2010 .

[8]  Hideki Fukudome.  Reduction of Longitudinal Vehicle Vibration Using In-Wheel Motors , 2016 .

[9]  Satoshi Murata,et al.  Vehicle Dynamics Innovation with In-Wheel Motor , 2011 .

[10]  Jianqiu Li,et al.  Combined AFS and DYC Control of Four-Wheel-Independent-Drive Electric Vehicles over CAN Network with Time-Varying Delays , 2014, IEEE Transactions on Vehicular Technology.

[11]  Davide Tavernini,et al.  Feedback brake distribution control for minimum pitch , 2017 .

[12]  Etsuo Katsuyama,et al.  Improvement of Ride Comfort by Unsprung Negative Skyhook Damper Control Using In-Wheel Motors , 2016 .

[13]  Etsuo Katsuyama.  Decoupled 3D Moment Control for Vehicle Motion Using In-Wheel Motors , 2013 .

[14]  Dzmitry Savitski,et al.  A Survey of Traction Control and Antilock Braking Systems of Full Electric Vehicles With Individually Controlled Electric Motors , 2015, IEEE Transactions on Vehicular Technology.

[15]  Klaus Augsburg,et al.  The new paradigm of an anti-lock braking system for a full electric vehicle: experimental investigation and benchmarking , 2016 .

[16]  Martyn J. Anderson.  Unsprung Mass with In-Wheel Motors-Myths and Realities , 2010 .

[17]  Johan Wideberg,et al.  Pitch reduction and traction enhancement of an EV by real-time brake biasing and in-wheel motor torque control , 2016 .