Microclimate design for open spaces: Ranking urban design effects on pedestrian thermal comfort in summer

Abstract The paper presents a study on the influence of urban morphology and urban design parameters such as street and building geometry, landscape elements including vegetation types, water surfaces and material properties and their effects on pedestrian thermal comfort in cities. The data provided by the paper are based on simulations using selected computational tools (ENVI-met, RadTherm and Fluent) and performed for two typical urban spaces, a square and a courtyard. The paper focuses on summer conditions which include increasingly uncomfortable periods. It draws upon studies initiated in the city of Thessaloniki in northern Greece. However, the findings apply to many other cities with similar morphological characteristics and summer design conditions. The results are ranked according to the influence each of the design parameters considered can have on pedestrian thermal comfort. Spatial and temporal variations are highlighted. Special mention is given to the high impact of trees and soil humidity and the contrasting effects of pavement albedo. The paper provides data for use by urban designers in specifying appropriate microclimatic interventions to improve pedestrian comfort.

[1]  M. Santamouris.  Cooling the cities – A review of reflective and green roof mitigation technologies to fight heat island and improve comfort in urban environments , 2014 .

[2]  Arthur H. Rosenfeld,et al.  Global Cooling: Effect of Urban Albedo on Global Temperature , 2007 .

[3]  Erik Johansson.  Urban Design and Outdoor Thermal Comfort in Warm Climates. Studies in Fez and Colombo , 2006 .

[4]  L. Shashua-Bar,et al.  The cooling efficiency of urban landscape strategies in a hot dry climate , 2009 .

[5]  Baruch Givoni,et al.  Climate considerations in building and urban design , 1998 .

[6]  Solar Shading Effects by Tree Species in an Urban Environment Using Numerical Simulation Tool , 2013 .

[7]  Ryozo Ooka,et al.  Recent development of assessment tools for urban climate and heat‐island investigation especially based on experiences in Japan , 2007 .

[8]  Helmut Mayer,et al.  Modification of Human-Biometeorologically Significant Radiant Flux Densities by Shading as Local Method to Mitigate Heat Stress in Summer within Urban Street Canyons , 2013 .

[9]  Andrea Vallati,et al.  Fluid dynamic and heat transfer parameters in an urban canyon , 2014 .

[10]  E. Shaviv,et al.  Physical modeling of pedestrian energy exchange within the urban canopy , 2006 .

[11]  H. Akbari,et al.  Cool surfaces and shade trees to reduce energy use and improve air quality in urban areas , 2001 .

[12]  T. Oke,et al.  Thermal remote sensing of urban climates , 2003 .

[13]  Takashi Asaeda,et al.  Characteristics of permeable pavement during hot summer weather and impact on the thermal environment , 2000 .

[14]  V. Masson,et al.  Inclusion of vegetation in the Town Energy Balance model for modelling urban green areas , 2012 .

[15]  Servando Álvarez Domínguez,et al.  Modelling microclimate in urban environments and assessing its influence on the performance of surrounding buildings , 2004 .

[16]  Limor Shashua-Bar,et al.  Passive cooling design options to ameliorate thermal comfort in urban streets of a Mediterranean climate (Athens) under hot summer conditions , 2012 .

[17]  I. D. Watson,et al.  Simulation of surface urban heat islands under ‘ideal’ conditions at night part 2: Diagnosis of causation , 1991 .

[18]  A. Spanou,et al.  Building and Environment , 2012 .

[19]  E. Johansson,et al.  Urban shading—a design option for the tropics? A study in Colombo, Sri Lanka , 2007 .

[20]  H. Mayer,et al.  Thermal comfort in an east–west oriented street canyon in Freiburg (Germany) under hot summer conditions , 2007 .

[21]  A. Chatzidimitriou,et al.  Microclimate development in open urban spaces: The influence of form and materials , 2015 .

[22]  Henrique Andrade,et al.  Microclimatic variation of thermal comfort in a district of Lisbon (Telheiras) at night , 2008 .

[23]  D. Boneh,et al.  Effect of high-albedo materials on pedestrian heat stress in urban street canyons , 2014 .

[24]  Mats Sandberg,et al.  Numerical and experimental studies of wind environment in an urban morphology , 2005 .

[25]  Effect of Canyon Geometry on Outdoor Thermal Comfort , 2013 .

[26]  H. Mayer,et al.  Modelling radiation fluxes in simple and complex environments—application of the RayMan model , 2007, International journal of biometeorology.

[27]  F. Lindberg,et al.  SOLWEIG 1.0 – Modelling spatial variations of 3D radiant fluxes and mean radiant temperature in complex urban settings , 2008, International journal of biometeorology.

[28]  C. Ren,et al.  Sky view factor analysis of street canyons and its implications for daytime intra‐urban air temperature differentials in high‐rise, high‐density urban areas of Hong Kong: a GIS‐based simulation approach , 2012 .

[29]  H. Taha.  Urban climates and heat islands: albedo, evapotranspiration, and anthropogenic heat , 1997 .

[30]  Sigalit Berkovic,et al.  Study of thermal comfort in courtyards in a hot arid climate , 2012 .

[31]  The thermal effects of city greens on surroundings under the tropical climate , 2004 .

[32]  P. Jones,et al.  Temperature decreases in an urban canyon due to green walls and green roofs in diverse climates , 2008 .

[33]  V. Ca,et al.  Reductions in air conditioning energy caused by a nearby park , 1998 .

[34]  Lambros T. Doulos,et al.  Passive cooling of outdoor urban spaces. The role of materials , 2004 .

[35]  Flora Bougiatioti,et al.  The summer thermal behaviour of “skin” materials for vertical surfaces in Athens, Greece as a decisive parameter for their selection , 2009 .

[36]  T. Williamson,et al.  Simulating air temperature in an urban street canyon in all weather conditions using measured data at a reference meteorological station , 2006 .

[37]  L. Shashua-Bar,et al.  The influence of trees and grass on outdoor thermal comfort in a hot‐arid environment , 2011 .

[38]  Edward Ng,et al.  Practical application of CFD on environmentally sensitive architectural design at high density cities: A case study in Hong Kong , 2013, Urban Climate.

[39]  P. Höppe,et al.  The physiological equivalent temperature – a universal index for the biometeorological assessment of the thermal environment , 1999, International journal of biometeorology.

[40]  D. Groleau,et al.  Modeling the influence of vegetation and water pond on urban microclimate , 2006 .