Hardness, grainsize and porosity formation prediction on the Laser Metal Deposition of AISI 304 stainless steel

[1]  J. Ramkumar,et al.  Analysis of transient thermo-fluidic behavior of melt pool during spot laser welding of 304 stainless-steel , 2018, Journal of Materials Processing Technology.

[2]  Konrad Wegener,et al.  Analysis of melt pool dynamics in laser cladding and direct metal deposition by automated high-speed camera image evaluation , 2018 .

[3]  Garret E. O’Donnell,et al.  Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: A review , 2018 .

[4]  A. Rollett,et al.  Numerical modeling and experimental validation of thermal history and microstructure for additive manufacturing of an Inconel 718 product , 2018, Progress in Additive Manufacturing.

[5]  Fritz Klocke,et al.  Evaluation of the relevance of melt pool dynamics in Laser Material Deposition process modeling , 2017 .

[6]  R. P. Martukanitz,et al.  Partitioning of laser energy during directed energy deposition , 2017 .

[7]  I. Jasiuk,et al.  Induced porosity in Super Alloy 718 through the laser additive manufacturing process: Microstructure and mechanical properties , 2017 .

[8]  Fritz Klocke,et al.  Instantaneous powder flux regulation system for Laser Metal Deposition , 2017 .

[9]  Guanqun Yu,et al.  Porosity evolution and its thermodynamic mechanism of randomly packed powder-bed during selective laser melting of Inconel 718 alloy , 2017 .

[10]  C. Emmelmann,et al.  Additive Manufacturing of Metals , 2016 .

[11]  W. Liao,et al.  Microstructure and porosity evaluation in laser-cladding deposited Ni-based coatings , 2016 .

[12]  H. Qi,et al.  Control of crystal orientation and continuous growth through inclination of coaxial nozzle in laser powder deposition of single-crystal superalloy , 2016 .

[13]  Wei Ya,et al.  2D modelling of clad geometry and resulting thermal cycles during laser cladding , 2016 .

[14]  X. Shao,et al.  Efficient multiple time scale method for modeling compressible vapor plume dynamics inside transient keyhole during fiber laser welding , 2016 .

[15]  Vimal Dhokia,et al.  Hybrid additive and subtractive machine tools – Research and industrial developments , 2016 .

[16]  D. Appleyard.  Powering up on powder technology , 2015 .

[17]  Yibo Wang,et al.  Mitigation of Pores Generation at Overlapping Zone during Laser Cladding , 2015 .

[18]  Andrew J. Pinkerton,et al.  Advances in the modeling of laser direct metal deposition , 2015 .

[19]  E. Reutzel,et al.  Thermo-mechanical model development and validation of directed energy deposition additive manufacturing of Ti–6Al–4V , 2015 .

[20]  V. Ocelík,et al.  On the geometry of coating layers formed by overlap , 2014 .

[21]  Aitzol Lamikiz,et al.  Continuous Coaxial Nozzle Design for LMD based on Numerical Simulation , 2014 .

[22]  Vaclav Ocelik,et al.  The Prediction of Coating Geometry from Main Processing Parameters in Laser Cladding , 2014 .

[23]  A. Lamikiz,et al.  Modelling of energy attenuation due to powder flow-laser beam interaction during laser cladding process , 2012 .

[24]  Y. Shin,et al.  Numerical Modeling of Transport Phenomena and Dendritic Growth in Laser Conduction Welding of 304 Stainless Steel , 2011 .

[25]  V. Ocelík,et al.  Microstructure and properties of laser clad coatings studied by orientation imaging microscopy , 2010 .

[26]  Mahmud Ashraf,et al.  Elevated temperature material properties of stainless steel alloys , 2010 .

[27]  Li Wang,et al.  Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting , 2010 .

[28]  Xiaoyan Zeng,et al.  Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding , 2010 .

[29]  A. Bandyopadhyay,et al.  Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants. , 2010, Acta biomaterialia.

[30]  L. Quintino,et al.  Imperfections in laser clading with powder and wire fillers , 2010 .

[31]  Edson Costa Santos,et al.  Structure of NiCrAlY coatings deposited on single-crystal alloy turbine blade material by laser cladding , 2009 .

[32]  W. Tong,et al.  Effect of cooling rate on solidification microstructures in AISI 304 stainless steel , 2008 .

[33]  R. Fabbro,et al.  Analytical and numerical modelling of the direct metal deposition laser process , 2008 .

[34]  Jan P. Huissoon,et al.  Three-dimensional numerical approach for geometrical prediction of multilayer laser solid freeform fabrication process , 2007 .

[35]  Li Peng,et al.  Direct laser fabrication of nickel alloy samples , 2005 .

[36]  Frank W. Liou,et al.  Modeling of laser deposition and repair process , 2005 .

[37]  Lin Li,et al.  Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances , 2004 .

[38]  Andrew J. Pinkerton,et al.  The significance of deposition point standoff variations in multiple-layer coaxial laser cladding (coaxial cladding standoff effects) , 2004 .

[39]  Pan Michaleris,et al.  Finite element modeling discretization requirements for the laser forming process , 2004 .

[40]  F. Stott,et al.  Mechanisms of porosity formation along the solid/liquid interface during laser melting of ceramics , 2003 .

[41]  Rui M. Vilar,et al.  Laser cladding , 2003, Advanced Laser Technologies.

[42]  Radovan Kovacevic,et al.  A three dimensional model for direct laser metal powder deposition and rapid prototyping , 2003 .

[43]  A. Schino,et al.  Effects of martensite formation and austenite reversion on grain refining of AISI 304 stainless steel , 2002 .

[44]  H. Tsai,et al.  Pore formation and prevention in deep penetration pulsed laser welding , 2002 .

[45]  Hidekazu Murakawa,et al.  Numerical analysis of the competitive influence of Marangoni flow and evaporation on heat surface temperature and molten pool shape in laser surface remelting , 2001 .

[46]  R. Honeycombe.  Steels, Microstructure and Properties , 1982 .