Diagnosis and Mitigation of Fatigue Damage in Longitudinal Diaphragms of Cable-Stayed Bridges

AbstractPremature fatigue cracking in the tube-gusset plate connection of longitudinal diaphragms has been observed in long-span cable-stayed bridges, resulting in undesirable stress distribution of the decks and costly repair efforts. Based on field inspection and finite-element (FE) simulation, this paper presents a diagnosis of the fatigue damage, and it is found that under the vehicle loads the connections are subjected to large stress cycles and significant stress concentration exists around the cope holes. The secondary stresses caused by bending result in different degrees of cracking among the eight locations of the diaphragm within a chamber. To mitigate such damage, several retrofit measures, including plug welding at the slot end, crack-stop holes, welded plates, and bolted channels, were applied. According to field observation and FE simulation, it is found that although the plug welding, crack-stop holes, and welded plates may slightly mitigate the cracking, they cannot significantly elongate...

[1]  Paulo B. Lourenço,et al.  A spectrum-driven damage identification technique: Application and validation through the numerical simulation of the Z24 Bridge , 2016 .

[2]  Tong Guo,et al.  Cracking of Longitudinal Diaphragms in Long-Span Cable-Stayed Bridges , 2015 .

[3]  Frank Schanack,et al.  Collapse of Steel Bridges , 2007 .

[4]  François Toutlemonde,et al.  Effect on Bridge Load Effects of Vehicle Transverse In-Lane Position: A Case Study , 2015 .

[5]  Constantin Christopoulos,et al.  Gusset Plate Connections to Circular Hollow Section Braces under Inelastic Cyclic Loading , 2008 .

[6]  Bin Chen,et al.  Basic Performance of the Composite Deck System Composed of Orthotropic Steel Deck and Ultrathin RPC Layer , 2013 .

[7]  Y. Edward Zhou.  Assessment of Bridge Remaining Fatigue Life through Field Strain Measurement , 2006 .

[8]  Alain Nussbaumer,et al.  Advanced Numerical Modeling of Cracked Tubular K Joints: BEM and FEM Comparison , 2012 .

[9]  Shengjun Pan,et al.  Displacement Monitoring and Analysis of Expansion Joints of Long-Span Steel Bridges with Viscous Dampers , 2015 .

[10]  Farrel J. Zwerneman,et al.  Fatigue damage to steel bridge diaphragms , 1993 .

[11]  Hui Li,et al.  Monitoring and Failure Analysis of Corroded Bridge Cables under Fatigue Loading Using Acoustic Emission Sensors , 2012, Sensors.

[12]  Gian A. Rassati,et al.  Numerical simulation of gusset plate connections with rectangular hollow section shape brace under quasi-static cyclic loading , 2012 .

[13]  Rong Liu,et al.  Evaluation on root-deck fatigue of orthotropic steel bridge deck , 2013 .

[14]  Shuyuan Lin,et al.  Modelling partial end-plate connections under fire conditions , 2014 .

[15]  Amit Kanvinde,et al.  Earthquake-induced net section fracture in brace connections — experiments and simulations , 2010 .

[16]  J. W. Fisher,et al.  Fatigue of steel bridge infrastructure , 2011 .

[17]  Liping Liu,et al.  Second Nanjing Cable-Stayed Bridge , 2004 .

[18]  John W. Fisher,et al.  Identifying Effective and Ineffective Retrofits for Distortion Fatigue Cracking in Steel Bridges Using Field Instrumentation , 2006 .

[19]  Mark F. Green,et al.  Fatigue Damage of Steel Bridges Due to Dynamic Vehicle Loads , 2006 .

[20]  Gregory J. Hancock,et al.  Butt Welds and Transverse Fillet Welds in Thin Cold-Formed RHS Members , 1995 .

[21]  F. C. Hadipriono,et al.  ANALYSIS OF RECENT BRIDGE FAILURES IN THE UNITED STATES , 2003 .

[22]  Jeffrey A. Packer,et al.  Parametric finite element study of slotted end connections to circular hollow sections , 2006 .