Performance evaluation of direct methanol fuel cells for portable applications

Abstract This study examines the feasibility of powering a range of portable devices with a direct methanol fuel cell (DMFC). The analysis includes a comparison between a Li-ion battery and DMFC to supply the power for a laptop, camcorder and a cell phone. A parametric study of the systems for an operational period of 4 years is performed. Under the assumptions made for both the Li-ion battery and DMFC system, the battery cost is lower than the DMFC during the first year of operation. However, by the end of 4 years of operational time, the DMFC system would cost less. The weight and cost comparisons show that the fuel cell system occupies less space than the battery to store a higher amount of energy. The weight of both systems is almost identical. Finally, the CO2 emissions can be decreased by a higher exergetic efficiency of the DMFC, which leads to improved sustainability.

[1]  K. Cowey,et al.  Portable and military fuel cells , 2004 .

[2]  Michael J. Moran,et al.  Availability analysis: A guide to efficient energy use , 1982 .

[3]  Jung-Ho Wee,et al.  A feasibility study on direct methanol fuel cells for laptop computers based on a cost comparison with lithium-ion batteries , 2007 .

[4]  Y. H. Pan.  Advanced air-breathing direct methanol fuel cells for portable applications , 2006 .

[5]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[6]  Jon M. Moore,et al.  Development of a PEM fuel cell powered portable field generator for the dismounted soldier , 2002 .

[7]  R. Singh.  Will developing countries spur fuel cell surge , 1999 .

[8]  M. J. Moran,et al.  Exergy Analysis: Principles and Practice , 1994 .

[9]  Ibrahim Dincer,et al.  Role of exergy in increasing efficiency and sustainability and reducing environmental impact , 2008 .

[10]  I. Dincer,et al.  PORTABLE FUEL CELLS - FUNDAMENTALS, TECHNOLOGIES AND APPLICATIONS , 2008 .

[11]  Peter J. Hesketh,et al.  Design, fabrication, and testing of a near constant pressure fuel delivery system for miniature fuel cells , 2004 .

[12]  Sukhvinder P.S. Badwal,et al.  Design, assembly and operation of polymer electrolyte membrane fuel cell stacks to 1 kWe capacity , 2004 .

[13]  Christopher K. Dyer.  Fuel cells for portable applications , 2002 .

[14]  A. S. Patil,et al.  Portable fuel cell systems for America’s army: technology transition to the field , 2004 .

[15]  Ramana G. Reddy,et al.  Materials and design development for bipolar/end plates in fuel cells , 2004 .

[16]  J. Whitacre,et al.  Direct methanol fuel cells : progress, problems and prospects , 2006 .

[17]  Emanuel Peled,et al.  Water-neutral micro direct-methanol fuel cell (DMFC) for portable applications , 2003 .