Mechanical and Geometric Performance of PLA-Based Polymer Composites Processed by the Fused Filament Fabrication Additive Manufacturing Technique

In this work, the effect of short carbon fibre (CF) on the mechanical and geometric properties of 3D printed polylactic acid (PLA) composite parts processed using the Fused Filament Fabrication (FFF) technique have been analysed. Tensile, flexural and interlaminar shear strength (ILSS) tests were performed to obtain the mechanical performance of the different samples. The surface quality and geometric accuracy of the printed specimens were also evaluated. Finally, Scanning Electron Microscope (SEM) images of the printed samples are analysed. The results revealed that the addition of carbon fibres effectively improved all assessed mechanical properties of PLA-CF composites as compared to the neat PLA. In particular, Flat PLA-CF samples showed an average increase in tensile performance of 47.1% for the tensile strength and 179.9% for the tensile stiffness in comparison to the neat PLA. From the flexural behaviour point of view, Flat PLA-CF samples revealed an increase in average flexural strength and stiffness of 89.75% and 230.95%, respectively in comparison to the neat PLA. Furthermore, PLA-CF samples depicted the best ILSS performance. In general, the use of short carbon fibre as reinforcement did not affect the dimensional accuracy of the PLA-CF samples, and even improved the surface roughness in certain cases, particularly in Flat and On-edge orientations.

[1]  Brenden M. Minei,et al.  Development of multifunctional nanocomposites with 3-D printing additive manufacturing and low graphene loading , 2019 .

[2]  F. París,et al.  Characterization of 3D printed long fibre reinforced composites , 2018 .

[3]  Paolo Bettini,et al.  Fused Deposition Technique for Continuous Fiber Reinforced Thermoplastic , 2017, Journal of Materials Engineering and Performance.

[4]  E. García-Plaza,et al.  Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection , 2017 .

[5]  M. Sugavaneswaran,et al.  Analytical and experimental investigation on elastic modulus of reinforced additive manufactured structure , 2015 .

[6]  J. M. Chacón,et al.  Additive Manufacturing of PLA-Based Composites Using Fused Filament Fabrication: Effect of Graphene Nanoplatelet Reinforcement on Mechanical Properties, Dimensional Accuracy and Texture , 2019, Polymers.

[7]  Omar Ahmed Mohamed,et al.  Optimization of fused deposition modeling process parameters for dimensional accuracy using I-optimality criterion , 2016 .

[8]  Ali Fatemi,et al.  Effects of fiber orientation and anisotropy on tensile strength and elastic modulus of short fiber reinforced polymer composites , 2015 .

[9]  J. M. Chacón,et al.  Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties , 2019, Composites Science and Technology.

[10]  Xin Wang,et al.  3D printing of polymer matrix composites: A review and prospective , 2017 .

[11]  M. Meboldt,et al.  Mechanical characterization of 3D printed polymers for fiber reinforced polymers processing , 2017 .

[12]  F. Magalhães,et al.  Poly(lactic acid) Composites Containing Carbon-Based Nanomaterials: A Review , 2017, Polymers.

[13]  Arvind Agarwal,et al.  Integration of graphene in poly(lactic) acid by 3D printing to develop creep and wear-resistant hierarchical nanocomposites , 2018 .

[14]  H. Friedrich,et al.  3D printing of CNT- and graphene-based conductive polymer nanocomposites by fused deposition modeling , 2017 .

[15]  Caterina Casavola,et al.  Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory , 2016 .

[16]  Eustaquio García Plaza,et al.  Analysis of PLA Geometric Properties Processed by FFF Additive Manufacturing: Effects of Process Parameters and Plate-Extruder Precision Motion , 2019, Polymers.

[17]  Ji Zhao,et al.  Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament , 2019, Journal of Manufacturing Processes.

[18]  Yuchuan Cheng,et al.  Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling , 2018 .

[19]  Yi Li,et al.  Enhanced mechanical and tribological properties in polyphenylene sulfide/polytetrafluoroethylene composites reinforced by short carbon fiber , 2016 .

[20]  Michael Czabaj,et al.  Interlayer fracture toughness of additively manufactured unreinforced and carbon-fiber-reinforced acrylonitrile butadiene styrene , 2018, Additive Manufacturing.

[21]  W. Cong,et al.  Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling , 2015 .

[22]  M. Longana,et al.  An investigation into 3D printing of fibre reinforced thermoplastic composites , 2018, Additive Manufacturing.

[23]  Fernão D. Magalhães,et al.  Biocompatible reinforcement of poly(Lactic acid) with graphene nanoplatelets , 2018 .

[24]  Hans Nørgaard Hansen,et al.  State-of-the-art of fiber-reinforced polymers in additive manufacturing technologies , 2017 .

[25]  José Carlos Bellido,et al.  Integration of topology optimized designs into CAD/CAM via an IGES translator , 2014 .

[27]  S. Ozcan,et al.  Additively manufactured carbon fiber-reinforced composites: State of the art and perspective , 2020, Additive Manufacturing.

[28]  K. McDonnell,et al.  Fabrication of Continuous Carbon, Glass and Kevlar fibre reinforced polymer composites using Additive Manufacturing , 2017 .

[29]  Frederic Roger,et al.  Multifunctional properties of 3D printed poly(lactic acid)/graphene nanocomposites by fused deposition modeling , 2017 .

[30]  Anthony J. Favaloro,et al.  Fused filament fabrication of fiber-reinforced polymers: A review , 2018 .

[31]  Yan Zhang,et al.  3D Printed Graphene Based Energy Storage Devices , 2017, Scientific Reports.

[32]  Jordi Llumà,et al.  Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts , 2015 .

[33]  P. E. Romero,et al.  Decision Tree Methods for Predicting Surface Roughness in Fused Deposition Modeling Parts , 2019, Materials.

[34]  Bengt-Göran Rosén,et al.  Study on surface texture of Fused Deposition Modeling , 2018 .

[35]  Souran Manoochehri,et al.  Dimensional Prediction for FDM Machines Using Artificial Neural Network and Support Vector Regression , 2019 .

[36]  T. Chou,et al.  Interfacial bonding strength of short carbon fiber/acrylonitrile-butadiene-styrene composites fabricated by fused deposition modeling , 2018 .

[37]  Ahmed Jawad Qureshi,et al.  Taguchi based process optimization for dimension and tolerance control for fused deposition modelling , 2018 .

[38]  Akira Todoroki,et al.  3D printing of composite sandwich structures using continuous carbon fiber and fiber tension , 2018, Composites Part A: Applied Science and Manufacturing.

[39]  A. Todoroki,et al.  Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation , 2016, Scientific Reports.

[40]  J. M. Chacón,et al.  Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling , 2018, Polymer Testing.

[41]  Joshua M. Pearce,et al.  Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions , 2014 .

[42]  J. M. Chacón,et al.  Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling , 2018, Composites Part B: Engineering.

[43]  R. T. L. Ferreira,et al.  Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers , 2017 .

[44]  Hui Wang,et al.  Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties , 2017 .