Single-line fault detection, faulted feeder identification, fault type classification, fault location and fault impedance estimation, continue to pose a problem to delta-delta connected distribution systems such as the Los Angeles Department of Water and Power (LADWP) which has over 1500 feeder circuits at the 4.8 kV voltage level. This paper describes a rule based decision support (RBDS) system application to single-line fault detection in a delta-delta connected distribution system. The RBDS system is built from knowledge acquired through exhaustive simulation based on non-arcing type fault situations. It is primarily designed to detect the presence of a fault, identify the faulted feeder, the faulted phase and classify the fault type. It is also designed to gauge the proximity of the fault to the substation and to assess the fault impedance. A fault in the distribution system, upon identification, triggers an alarm with explanatory facility leading to the fault. The RBDS system was tested with different sets of simulated data and proved successful in most cases. Additional tests will be done using field data made available by LADWP. The RBDS system module is a prototype integrated fault detection scheme to be installed in a LADWP distribution substation. >
[1]
Adly A. Girgis,et al.
A Hybrid Expert System for Faulted Section Identification, Fault Type Classification and Selection of Fault Location Algorithms
,
1989,
IEEE Power Engineering Review.
[2]
C. Fukui,et al.
An Expert System for Fault Section Estimation Using Information from Protective Relays and Circuit Breakers
,
1986,
IEEE Transactions on Power Delivery.
[3]
J. A. Momoh,et al.
Integrated detection and protection schemes for high-impedance faults on distribution systems
,
1992,
[Proceedings] 1992 IEEE International Conference on Systems, Man, and Cybernetics.
[4]
C. J. Kim,et al.
Classification of Faults and Switching Events by Inductive Reasoning and Expert System Methodology
,
1989,
IEEE Power Engineering Review.