Effect of strong dielectric substances on the damage characteristics of rocks exposed to microwave radiation: Insight from experiments and mechanisms

It has been demonstrated that microwave pretreatment can weaken rocks, reduce tool wear, and improve mechanical rock breaking efficiency. The dielectric properties of rock minerals are a major factor affecting the ability of rocks to absorb microwaves, so it is important to conduct experimental research on rock modification to improve the microwave absorption capacity of rocks. The concept of “microwave-assisted absorbing reagents” has been proposed to increase the microwave absorption capacity of rocks. Sandstone specimens are first pretreated with strong dielectric substances before being exposed to microwave radiation to increase their microwave absorption capacity, then they are exposed to microwave fields and finally conducted to uniaxial compression tests. Enhancement in microwave absorption capacity of sandstone specimens is showed by P-wave velocity, nuclear magnetic resonance, and mechanical tests before and after microwave treatment. The results showed that barium titanate suspension and water are both effective microwave-assisted absorbing agents. The specimens treated with barium titanate suspension exhibited better microwave absorption capacity; in 5 kW microwave power irradiation, its p-wave velocity falls by 14.04%, porosity rises by 25.43%, and uniaxial compressive strength falls by 24.98%. Additionally, the failure form of sandstone specimens changes from brittle to plastic once it has fully absorbed microwave energy.

[1]  H. Konietzky,et al.  Quasi-Static and Dynamic Tensile Behavior of Water-Bearing Sandstone Subjected to Microwave Irradiation , 2022, Mathematics.

[2]  Jiangteng Li,et al.  Fracture behavior and damage evolution model of sandstone containing a single pre-existing flaw under discontinuous fatigue loading , 2022, International Journal of Damage Mechanics.

[3]  Xibing Li,et al.  Experimental investigation on dynamic mechanical properties and fracture evolution behavior of the underground openings with excavation damaged zones , 2022, International Journal of Damage Mechanics.

[4]  F. Gao,et al.  Numerical investigation of TBM disc cutter cutting on microwave-treated basalt with an unrelieved model , 2022, Archives of Civil and Mechanical Engineering.

[5]  J. C. Li,et al.  Design and performance of an open-ended converging microwave antenna in fracturing biotite diorite at low microwave power levels , 2021, Geomechanics and Geophysics for Geo-Energy and Geo-Resources.

[6]  Z. Shao,et al.  Quantifying damage evolution within olivine basalt based on crack propagation behavior under microwave irradiation , 2021, International Journal of Damage Mechanics.

[7]  Khashayar Teimoori,et al.  Multiphysics study of microwave irradiation effects on rock breakage system , 2021 .

[8]  K. Zhou,et al.  Mechanical Characteristics and Mesostructural Damage of Saturated Limestone under Different Load and Unload Paths , 2021, Advances in Civil Engineering.

[9]  D. Elsworth,et al.  Coupled multiscale-modeling of microwave-heating-induced fracturing in shales , 2020 .

[10]  Lei He,et al.  Microwave fracturing of water-bearing sandstones: Heating characteristics and bursting , 2020 .

[11]  F. Hassani,et al.  Twenty years of experimental and numerical studies on microwave-assisted breakage of rocks and minerals-a review. , 2020, 2011.14624.

[12]  Shibing Huang,et al.  Effect of water content on the mechanical properties and deformation characteristics of the clay-bearing red sandstone , 2020, Bulletin of Engineering Geology and the Environment.

[13]  Lei He,et al.  Heating characteristics of igneous rock-forming minerals under microwave irradiation , 2020 .

[14]  K. Zhou,et al.  Analysis of Microwave Thermal Stress Fracture Characteristics and Size Effect of Sandstone under Microwave Heating , 2020, Energies.

[15]  Jin Dalong,et al.  Effect of Spatial Variability on Disc Cutters Failure During TBM Tunneling in Hard Rock , 2020, Rock Mechanics and Rock Engineering.

[16]  Yanlong Zheng,et al.  Experimental Investigation on the Thermal, Mechanical and Cracking Behaviours of Three Igneous Rocks Under Microwave Treatment , 2020, Rock Mechanics and Rock Engineering.

[17]  B. M. Kunar,et al.  Measurement of bit-rock interface temperature and wear rate of the tungsten carbide drill bit during rotary drilling , 2020, Friction.

[18]  Ferri P. Hassani,et al.  Experimental Investigations of Microwave Effects on Rock Breakage Using SEM Analysis , 2019, Proceedings 17th International Conference on Microwave and High Frequency Heating.

[19]  Horst Wagner,et al.  Deep Mining: A Rock Engineering Challenge , 2019, Rock Mechanics and Rock Engineering.

[20]  P. Nelson,et al.  Fully-coupled simulations of thermally-induced cracking in pegmatite due to microwave irradiation , 2019, Journal of Rock Mechanics and Geotechnical Engineering.

[21]  L. Olsen-Kettle Bridging the macro to mesoscale: Evaluating the fourth-order anisotropic damage tensor parameters from ultrasonic measurements of an isotropic solid under triaxial stress loading , 2019 .

[22]  Minghe Ju,et al.  Opportunities and Challenges in Deep Mining: A Brief Review , 2017 .

[23]  F. Hassani,et al.  The influence of microwave irradiation on thermal properties of main rock-forming minerals , 2017 .

[24]  F. Hassani,et al.  The influence of microwave irradiation on rocks for microwave-assisted underground excavation , 2016 .

[25]  F. Hassani,et al.  Microwave Assisted Rock Breakage for Space Mining , 2015 .

[26]  Shi Liu,et al.  Ultrasonic method to evaluate the residual properties of thermally damaged sandstone based on time–frequency analysis , 2015 .

[27]  D. Mishra,et al.  A method for estimating crack-initiation stress of rock materials by porosity , 2014, Journal of the Geological Society of India.

[28]  S. M. Oak,et al.  Nd:YAG Laser Assisted Drilling and Spallation of Rocks , 2013 .

[29]  Jafar Khademi Hamidi,et al.  Simultaneous Effects of Joint Spacing and Orientation on TBM Cutting Efficiency in Jointed Rock Masses , 2013, Rock Mechanics and Rock Engineering.

[30]  Dipankar Ghosh,et al.  Colossal Permittivity in Microwave‐Sintered Barium Titanate and Effect of Annealing on Dielectric Properties , 2013 .

[31]  Ferri P. Hassani,et al.  The Development of Microwave Assisted Machineries to Break Hard Rocks , 2011 .

[32]  Arben Merkoçi,et al.  Recent trends in macro-, micro-, and nanomaterial-based tools and strategies for heavy-metal detection. , 2011, Chemical reviews.

[33]  Peter Moser,et al.  Microwave heating of dry and water saturated basalt, granite and sandstone , 2010 .

[34]  I. Yilmaz,et al.  Prediction of the strength and elasticity modulus of gypsum using multiple regression, ANN, and ANFIS models , 2009 .

[35]  M. Zikry,et al.  The Effects of Grain-boundary Orientations on Failure Behavior in F.C.C. Polycrystalline Systems , 2009 .

[36]  S. Shen,et al.  Analysis of shearing effect on tunnel induced by load transfer along longitudinal direction , 2008 .

[37]  P. Radziszewski,et al.  Investigating microwave assisted rock breakage for possible space mining applications , 2006 .

[38]  S. Kingman,et al.  Understanding microwave assisted breakage , 2005 .

[39]  S. Kahraman,et al.  The effect of porosity on the relation between uniaxial compressive strength and point load index , 2005 .

[40]  Rima Chatterjee,et al.  Petrophysical and geomechanical properties of rocks from the oilfields of the Krishna-Godavari and Cauvery Basins, India , 2002 .

[41]  K. E. Haque,et al.  Microwave energy for mineral treatment processes—a brief review , 1999 .

[42]  K. Seshagiri Rao,et al.  Index properties of weathered rocks: inter-relationships and applicability , 1998 .

[43]  Stuart O. Nelson,et al.  A microwave method for on-line determination of bulk density and moisture content of particulate materials , 1998, IEEE Trans. Instrum. Meas..

[44]  J.W. Walkiewicz,et al.  Microwave-assisted grinding , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[45]  S. McGill,et al.  Microwave heating characteristics of selected minerals and compounds , 1988 .

[46]  Robert E. Jackson,et al.  Porosity dependence and mechanism of brittle fracture in sandstones , 1973 .

[47]  Jianping Liu,et al.  Simulation and experimental research of laser scanning breaking granite , 2022 .

[48]  H. K. Verma,et al.  Blast induced rock mass damage around tunnels , 2018 .

[49]  K. Zacny In Situ Resource Utilization and Space Mining , 2017 .

[50]  Zhaomin Li,et al.  Numerical Investigation of Rock Breaking Mechanisms by High Pressure Water Jet , 2015 .

[51]  Xu Yujuan EXPERIMENTAL STUDY OF ROCK POROUS STRUCTURE DAMAGE CHARACTERISTICS UNDER CONDITION OF FREEZING-THAWING CYCLES BASED ON NUCLEAR MAGNETIC RESONANCE TECHNIQUE , 2012 .

[52]  D. Mingos,et al.  The Application of Microwave Heating to Chemical Syntheses , 1994 .

[53]  P. J. Lauriello,et al.  DESIGN AND ECONOMIC CONSTRAINTS OF THERMAL ROCK WEAKENING TECHNIQUES , 1974 .