High temperature mechanical properties of porous Si3N4 prepared via SRBSN

[1]  Yuping Zeng,et al.  The effect of oxidation on the mechanical properties and dielectric properties of porous Si3N4 ceramics , 2017 .

[2]  J. Günster,et al.  The effect of fabrication parameters on the mechanical properties of sintered reaction bonded porous Si3N4 ceramics , 2014 .

[3]  Yuping Zeng,et al.  Fabrication of porous Si3N4 ceramics through a novel gelcasting method , 2014 .

[4]  Jürgen G. Heinrich,et al.  Rapid fabrication of porous Si3N4/SiC ceramics via nitridation of silicon powder with ZrO2 as catalyst , 2014 .

[5]  Hongjie Wang,et al.  Low‐Temperature Preparation of β‐Si3N4 Porous Ceramics with a Small Amount of Li2O–Y2O3 , 2014 .

[6]  Q. Shen,et al.  Creep and strength of ZrP2O7 bonded Si3N4 porous ceramics at 800–1000 °C , 2012 .

[7]  Yuping Zeng,et al.  Porous Si3N4 ceramics prepared via slip casting of Si and reaction bonded silicon nitride , 2011 .

[8]  Yuping Zeng,et al.  The Effects of BN Addition on the Mechanical Properties of Porous Si3N4/BN Ceramics Prepared Via Nitridation of Silicon Powder , 2011 .

[9]  Q. Shen,et al.  Gas Pressure Sintering of Arbitrary Porous Silicon Nitride Ceramics with High Mechanical Strength , 2010 .

[10]  H. Klemm.  Silicon Nitride for High‐Temperature Applications , 2010 .

[11]  Byong-Taek Lee,et al.  Formation of rod-like Si3N4 grains in porous SRBSN bodies using 6Y2O3–2MgO sintering additives , 2009 .

[12]  X. Kong,et al.  Direct measurement of residual stresses and their effects on the microstructure and mechanical properties of heat-treated Si3N4 ceramics II: With CeO2 as a single additive , 2007 .

[13]  K. Niihara,et al.  Effects of carbon source on microstructural evolution and sintering behavior of porous silicon nitride ceramics , 2007 .

[14]  T. Ohji,et al.  Effect of Sintering Additives on Microstructure and Mechanical Properties of Porous Silicon Nitride Ceramics , 2006 .

[15]  F. Lange.  The sophistication of ceramic science through silicon nitride studies , 2006 .

[16]  Hong Lin,et al.  Direct measurement of residual stresses and their effects on the microstructure and mechanical properties of heat-treated Si3N4 ceramics , 2006 .

[17]  G. Schneider,et al.  Synthesis of fibrous β-Si3N4 structured porous ceramics using carbothermal nitridation of silica , 2005 .

[18]  C. Kawai,et al.  Effect of Porosity and Microstructure on the Strength of Si3N4: Designed Microstructure for High Strength, High Thermal Shock Resistance, and Facile Machining , 2005 .

[19]  S. Guo,et al.  Improvement of high-temperature strength of hot-pressed sintering silicon nitride with Lu2O3 addition , 2001 .

[20]  T. Rouxel.  High temperature mechanical behavior of silicon nitride ceramics , 2001 .

[21]  K. Yamada,et al.  High temperature mechanical properties of Si3N4–MoSi2 and Si3N4–SiC composites with network structures of second phases , 1999 .

[22]  C. Kawai,et al.  Separation–permeation performance of porous Si3N4 ceramics composed of columnar β-Si3N4 grains as membrane filters for microfiltration , 1999 .

[23]  G. Pezzotti,et al.  Fracture toughness and time-dependent strength behavior of low-doped silicon nitrides for applications at 1400 C , 1994 .

[24]  F. Porz,et al.  Oxidation mechanism of porous silicon nitride , 1984 .

[25]  S. Singhal,et al.  Phase Relations and Stability Studies in the Si3N4‐SiO2‐Y2O3 Pseudoternary System , 1977 .

[26]  S. Singhal.  Thermodynamics and kinetics of oxidation of hot-pressed silicon nitride , 1976 .