Pore crystallization and expansion of cement pastes in sulfate solutions with and without chlorides

[1]  Kefei Li,et al.  Investigations on the rehydration of recycled blended SCMs cement , 2023, Cement and Concrete Research.

[2]  Kefei Li,et al.  Spalling Rate of Concretes Subject to Combined Leaching and External Sulfate Attack , 2022, SSRN Electronic Journal.

[3]  P. Dangla,et al.  Modeling the sulfate attack induced expansion of cementitious materials based on interface-controlled crystal growth mechanisms , 2022, Cement and Concrete Research.

[4]  P. Dangla,et al.  Reactive transport modelling of concurrent chloride ingress and carbonation in concrete , 2021, Materials and Structures.

[5]  P. A. Muhammed Basheer,et al.  Expansion of CEM I and slag-blended cement mortars exposed to combined chloride-sulphate environments , 2019, Cement and Concrete Research.

[6]  P. Dangla,et al.  Pore size analyses of cement paste exposed to external sulfate attack and delayed ettringite formation , 2019, Cement and Concrete Research.

[7]  N. Roussel,et al.  Durability of cement pastes exposed to external sulfate attack and leaching: Physical and chemical aspects , 2019, Cement and Concrete Research.

[8]  Magdalena Balonis,et al.  Cemdata18: A chemical thermodynamic database for hydrated Portland cements and alkali-activated materials , 2019, Cement and Concrete Research.

[9]  B. Šavija,et al.  Experimentally informed micromechanical modelling of cement paste: An approach coupling X-ray computed tomography and statistical nanoindentation , 2019, Composites Part B: Engineering.

[10]  Jiangbo Zhang,et al.  Ground granulated blast furnace slag effect on the durability of ternary cementitious system exposed to combined attack of chloride and sulfate , 2018 .

[11]  J. Werder,et al.  Comparative analysis of the dynamic vapor sorption (DVS) technique and the traditional method for sorption isotherms determination — Exemplified at autoclaved aerated concrete samples of four density classes , 2017 .

[12]  Birgit Meng,et al.  Deterioration of hardened cement paste under combined sulphate-chloride attack investigated by synchrotron XRD , 2016 .

[13]  K. Scrivener,et al.  Hydration states of AFm cement phases , 2015 .

[14]  J. Geng,et al.  The stability of bound chlorides in cement paste with sulfate attack , 2015 .

[15]  M. Geiker,et al.  The impact of sulphate and magnesium on chloride binding in Portland cement paste , 2014 .

[16]  Nele De Belie,et al.  Resistance of concrete and mortar against combined attack of chloride and sodium sulphate , 2014 .

[17]  Antonio Aguado,et al.  Alternative methodology to consider damage and expansions in external sulfate attack modeling , 2014 .

[18]  B. Bary,et al.  Coupled chemo-transport-mechanical modelling and numerical simulation of external sulfate attack in mortar , 2014 .

[19]  W. Müllauer,et al.  Sulfate attack expansion mechanisms , 2013 .

[20]  Jian-kang Chen,et al.  Study on the expansion of concrete under attack of sulfate and sulfate–chloride ions , 2013 .

[21]  Wei Sun,et al.  Mechanism of expansion of mortars immersed in sodium sulfate solutions , 2013 .

[22]  Thomas Wagner,et al.  GEM-Selektor geochemical modeling package: revised algorithm and GEMS3K numerical kernel for coupled simulation codes , 2012, Computational Geosciences.

[23]  Kefei Li,et al.  Pore structure characterization of cement pastes blended with high-volume fly-ash , 2012 .

[24]  Barbara Lothenbach,et al.  Impact of chloride on the mineralogy of hydrated portland cement systems , 2010 .

[25]  Ueli Angst,et al.  Critical Chloride Content in Reinforced Concrete: A Review , 2009 .

[26]  Dae-Wook Park,et al.  Mitigating effect of chloride ions on sulfate attack of cement mortars with or without silica fume , 2008 .

[27]  D. Massiot,et al.  MAS NMR spectra of quadrupolar nuclei in disordered solids: the Czjzek model. , 2008, Journal of magnetic resonance.

[28]  Zhang Yunsheng,et al.  Interaction Between Sulfate and Chloride Solution Attack of Concretes With and Without Fly Ash , 2007 .

[29]  W. M. Madgin,et al.  Solubilities in the system CaSO4‐NaCl‐H2O at 25° and 35° , 2007 .

[30]  Véronique Baroghel-Bouny,et al.  Water vapour sorption experiments on hardened cementitious materials. Part II: Essential tool for assessment of transport properties and for durability prediction , 2007 .

[31]  B. Lothenbach,et al.  The AFm phase in Portland cement , 2007 .

[32]  Jan Olek,et al.  Differentiating Seawater and Groundwater Sulfate Attack in Portland Cement Mortars , 2006 .

[33]  H. Giesche,et al.  Mercury Porosimetry: A General (Practical) Overview , 2006 .

[34]  Hamlin M. Jennings,et al.  Decalcification shrinkage of cement paste , 2006 .

[35]  K. Hossain.  Performance of volcanic ash and pumice-based blended cements in sulphate and sulphate–chloride environments , 2006 .

[36]  H. J. Jakobsen,et al.  A new aluminium-hydrate species in hydrated Portland cements characterized by 27Al and 29Si MAS NMR spectroscopy , 2006 .

[37]  G. Scherer.  Stress from crystallization of salt , 2004 .

[38]  Barzin Mobasher,et al.  Modeling of damage in cement-based materials subjected to external sulfate attack. I: Formulation , 2003 .

[39]  J. Olek,et al.  Effects of gypsum formation on the performance of cement mortars during external sulfate attack , 2003 .

[40]  Hans W. Reinhardt,et al.  Permeability and diffusivity of concrete as function of temperature , 2002 .

[41]  C. Gallé,et al.  Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry: A comparative study between oven-, vacuum-, and freeze-drying , 2001 .

[42]  M. Dubois,et al.  Mercury intrusion porosimetry and hierarchical structure of cement pastes: Theory and experiment , 2000 .

[43]  Kenneth C. Hover,et al.  Mercury porosimetry of hardened cement pastes , 1999 .

[44]  F. Glasser,et al.  Stability and solubility relationships in AFm phases: Part I. Chloride, sulfate and hydroxide , 1999 .

[45]  F. P. Glasser,et al.  Friedel’s salt, Ca2Al(OH)6(Cl,OH)·2H2O: its solid solutions and their role in chloride binding , 1998 .

[46]  O. Al-Amoudi.  Sulfate attack and reinforcement corrosion in plain and blended cements exposed to sulfate environments , 1998 .

[47]  Peter J. Tumidajski,et al.  An effective diffusivity for sulfate transport into concrete , 1995 .

[48]  M. Maslehuddin,et al.  Role of chloride ions on expansion and strength reduction in plain and blended cements in sulfate environments , 1995 .

[49]  H. J. Jakobsen,et al.  Characterization of calcium aluminate phases in cements by aluminum-27 MAS NMR spectroscopy , 1993 .

[50]  H. Helgeson,et al.  Theoretical prediction of the thermodynamic behavior of aqueous electrolytes by high pressures and temperatures; IV, Calculation of activity coefficients, osmotic coefficients, and apparent molal and standard and relative partial molal properties to 600 degrees C and 5kb , 1981 .

[51]  P. Brown,et al.  An evaluation of the sulfate resistance of cements in a controlled environment , 1981 .

[52]  B. Jones,et al.  WATEQ: A COMPUTER PROGRAM FOR CALCULATING CHEMICAL EQUILIBRIA OF NATURAL WATERS , 1973 .

[53]  Carl W. Correns,et al.  Growth and dissolution of crystals under linear pressure , 1949 .

[54]  John Johnston,et al.  THE SOLUBILITY OF CALCIUM HYDROXIDE IN AQUEOUS SALT SOLUTIONS , 1931 .

[55]  R. Bogue,et al.  Calculation of the Compounds in Portland Cement , 1929 .

[56]  William Thomson,et al.  4. On the Equilibrium of Vapour at a Curved Surface of Liquid. , 1872 .