Mechanical and shape-memory behavior of shape-memory polymer composites with hybrid fillers

Shape-memory polymer (SMP) materials have several drawbacks such as low strength, low stiffness and natural insulating tendencies, which seriously limit their development and applications. Much effort has been made to improve their mechanical properties by adding particle or fiber fillers to reinforce the polymer matrix. However, this often leads to the mechanical properties being enhanced slightly, but the shape-memory effect of reinforced SMP composites being drastically reduced. The experimental results reported here suggested that the mechanical resistive loading and thermal conductivity of a composite (with hybrid filler content of 7.0 wt%) were improved by 160 and 200%, respectively, in comparison with those of pure bulk SMP. Also, the glass transition temperature of the composite was enhanced to 57.28 °C from the 46.38 °C of a composite filled with 5.5 wt% hybrid filler, as determined from differential scanning calorimetry measurements. Finally, the temperature distribution and recovery behavior of specimens were recorded with infrared video in a recovery test, where a 28 V direct current circuit was applied. The effectiveness of carbon black and short carbon fibers being incorporated into a SMP with shape recovery activated by electricity has been demonstrated. These hybrid fillers were explored to improve the mechanical and conductive properties of bulk SMP. Copyright © 2010 Society of Chemical Industry

[1]  M. Lake,et al.  Shape memory polymer nanocomposites , 2002 .

[2]  Xin Lan,et al.  Fiber reinforced shape-memory polymer composite and its application in a deployable hinge , 2009 .

[3]  R. Langer,et al.  Light-induced shape-memory polymers , 2005, Nature.

[4]  A. Schmidt.  Electromagnetic Activation of Shape Memory Polymer Networks Containing Magnetic Nanoparticles , 2006 .

[5]  Jinsong Leng,et al.  Synergic effect of carbon black and short carbon fiber on shape memory polymer actuation by electricity , 2008 .

[6]  Jinsong Leng,et al.  Comment on “Water-driven programable polyurethane shape memory polymer: Demonstration and mechanism” [Appl. Phys. Lett. 86, 114105 (2005)] , 2008 .

[7]  Xin Lan,et al.  Electroactive thermoset shape memory polymer nanocomposite filled with nanocarbon powders , 2009 .

[8]  Wei Min Huang,et al.  Water-driven programmable polyurethane shape memory polymer: Demonstration and mechanism , 2005 .

[9]  Yanju Liu,et al.  Electroactivate shape-memory polymer filled with nanocarbon particles and short carbon fibers , 2007 .

[10]  Jinsong Leng,et al.  Effect of a linear monomer on the thermomechanical properties of epoxy shape-memory polymer , 2009 .

[11]  Thomas J. Pinnavaia,et al.  Polymer-layered silicate nanocomposites: an overview , 1999 .

[12]  Ward Small,et al.  Inductively Heated Shape Memory Polymer for the Magnetic Actuation of Medical Devices , 2005, IEEE Transactions on Biomedical Engineering.

[13]  Xin Lan,et al.  Review of electro-active shape-memory polymer composite , 2009 .

[14]  Yong-Chan Chung,et al.  Structure and Thermomechanical Properties of Polyurethane Block Copolymers with Shape Memory Effect , 2001 .

[15]  Xin Lan,et al.  Electrical conductivity of thermoresponsive shape-memory polymer with embedded micron sized Ni powder chains , 2008 .

[16]  A. Lendlein,et al.  Initiation of shape-memory effect by inductive heating of magnetic nanoparticles in thermoplastic polymers. , 2006, Proceedings of the National Academy of Sciences of the United States of America.

[17]  Jinsong Leng,et al.  Infrared light‐active shape memory polymer filled with nanocarbon particles , 2009 .

[18]  Jinsong Leng,et al.  Shape‐Memory Polymer in Response to Solution , 2008 .

[19]  Xin Lan,et al.  Significantly reducing electrical resistivity by forming conductive Ni chains in a polyurethane shape-memory polymer/carbon-black composite , 2008 .