Flow Structures in a U-Shaped Fuel Cell Flow Channel: Quantitative Visualization Using Particle Image Velocimetry

Flow through an experimental model of a U-shaped fuel cell channel is used to investigate the fluid dynamic phenomena that occur within serpentine reactant transport channels of fuel cells. Achieving effective mixing within these channels can significantly improve the performance of the fuel cell and proper understanding and characterization of the underlying fluid dynamics is required. Classes of vortex formation within a U-shaped channel of square cross section are characterized using high-image-density particle image velocimetry. A range of Reynolds numbers, 109 Re 872, corresponding to flow rates encountered in a fuel cell operating at low to medium current densities is investigated. The flow fields corresponding to two perpendicular cross sections of the channel are characterized in terms of the instantaneous and time-averaged representations of the velocity, streamline topology, and vorticity contours. The critical Reynolds number necessary for the onset of instability is determined, and the two perpendicular flow planes are compared in terms of absolute and averaged velocity values as well as Reynolds stress correlations. Generally, the flow undergoes a transition to a different regime when two recirculation zones, which originally develop in the U-bend region, merge into one separation region. This transition corresponds to generation of additional vortices in the secondary flow plane. fDOI: 10.1115/1.1843121g

[1]  J. Masliyah,et al.  Instability and transitions of flow in a curved square duct: the development of two pairs of Dean vortices , 1996, Journal of Fluid Mechanics.

[2]  J. M. Coulson,et al.  Heat Transfer , 2018, Finite Element Method for Solids and Structures.

[3]  N. K. Anand,et al.  HEAT TRANSFER IN 3-D SERPENTINE CHANNELS WITH RIGHT-ANGLE TURNS , 1999 .

[4]  B. Snyder,et al.  The upstream scale of flow development in curved circular pipes , 1985, Journal of Fluid Mechanics.

[5]  A. Murata,et al.  Detailed measurements of local heat transfer coefficients in turbulent flow through smooth and rib-roughened serpentine passages with a 180° sharp bend , 1999 .

[6]  N. K. Anand,et al.  HEAT TRANSFER IN A SERPENTINE CHANNEL WITH A SERIES OF RIGHT-ANGLE TURNS , 1993 .

[7]  W. Hawthorne,et al.  Secondary circulation in fluid flow , 1951, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[8]  J. Tarbell,et al.  Periodic flow in a curved tube , 1980 .

[9]  L. Talbot,et al.  Laser anemometer study of flow development in curved circular pipes , 1978, Journal of Fluid Mechanics.

[10]  L. Talbot,et al.  Flow in Curved Pipes , 1983 .

[11]  W. R. Dean Fluid Motion in a Curved Channel , 1928 .

[12]  Ned Djilali,et al.  Computational model of a PEM fuel cell with serpentine gas flow channels , 2004 .

[13]  J. H. Whitelaw,et al.  Laminar flow in a square duct of strong curvature , 1977, Journal of Fluid Mechanics.

[14]  Lin Wang,et al.  A parametric study of PEM fuel cell performances , 2003 .

[15]  Krishnaswamy Nandakumar,et al.  An experimental and numerical study of the Dean problem: flow development towards two-dimensional multiple solutions , 1992, Journal of Fluid Mechanics.

[16]  Lin Wang,et al.  A parametric study of PEM fuel cell performances , 2003 .