The authors' previously presented model determines the time to breakage of window glass exposed to a compartment fire. The physical and mechanical properties of glass and the history of the compartment fire are required. Among the mechanical properties of glass, the breaking stress, [delta]b, is the least well known. Here, experiments on 59 plate glass samples using the four-point flexure method are described to determine the breaking stress distribution. This distribution is described by a three-parameter cumulative Weibull function, G([delta]b)=0, for [delta]bu and for [delta]b greater than = [delta]u with the parameters m = 1[middle dot]21, [delta]0 = 33 MPa and [delta]u = 35.8 MPa. A breaking stress of 40 MPa (5800 psi) was determined to be a reasonable value to use in breaking calculations for ordinary window glass. The breaking patterns of the test specimens suggest that fractures initiate at edge imperfections rather than at surface flaws. Some experiments to estimate the heat transfer coefficient inside the compartment and the emissivity of the hot layer are also described and values are suggested for use in the model.
[1]
Craig L. Beyler,et al.
An Experimental Investigation of Glass Breakage in Compartment Fires
,
1991
.
[2]
W. Weibull.
A Statistical Distribution Function of Wide Applicability
,
1951
.
[3]
G. Bartenev.
The structure and mechanical properties of inorganic glasses
,
1970
.
[4]
R. B. Williamson,et al.
Exploratory backdraft experiments
,
1993
.
[5]
Patrick J. Pagni,et al.
Glass Breaking In Fires
,
1991
.
[6]
E. Dill,et al.
An Introduction to the Mechanics of Solids
,
1972
.