Measurement of Force Produced by an Insect-Mimicking Flapping-Wing System

We present a new version of a compact insect-mimicking flapping-wing system driven by a small motor, and suggest two testing approaches to measure the thrust or lift generated by a flapping-wing system. Flapping performance tests show the proposed flapping-wing system, which is powered by an onboard battery (lithium, 3.7 V, 180 mAh), could flap at flapping frequency of 25 Hz, and produce an average thrust or lift of about 3 g. In a wired-flight test under constrained conditions, the flapping-wing system could fly at an average forward velocity of 700 mm·s−1. For measuring the average thrust or lift produced by the flapping-wing system, we propose two testing approaches of wired-flight test and swing test with the aid of a high-speed camera and they are compared with a load cell measurement. The average thrust or lift values from the two proposed approaches agree well with the average thrust or lift values measured by a load cell.

[1]  Sunil Kumar Agrawal,et al.  Design of flapping mechanisms based on transverse bending phenomena in insects , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[2]  Adrian L. R. Thomas,et al.  Leading-edge vortices in insect flight , 1996, Nature.

[3]  J. Leishman,et al.  Flow Field of a Rotating-Wing Micro Air Vehicle , 2006 .

[4]  H. Park,et al.  Characteristics of an Insect-mimicking Flapping System Actuated by a Unimorph Piezoceramic Actuator , 2008 .

[5]  Y. Tai,et al.  Titanium-alloy MEMS wing technology for a micro aerial vehicle application , 2001 .

[6]  Hoon Cheol Park,et al.  Characteristics of a beetle’s free flight and a flapping-wing system that mimics beetle flight , 2010 .

[7]  Patrick Zdunich,et al.  Development and Testing of the Mentor Flapping-wing Micro Air Vehicle , 2007 .

[8]  Kevin Knowles,et al.  Insectlike Flapping Wings in the Hover Part II: Effect of Wing Geometry , 2008 .

[9]  Robert J. Wood,et al.  Design, fabrication, and analysis of a 3DOF, 3cm flapping-wing MAV , 2007, 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[10]  J K Shang,et al.  Artificial insect wings of diverse morphology for flapping-wing micro air vehicles , 2009, Bioinspiration & biomimetics.

[11]  Nam Seo Goo,et al.  Design and evaluation of a LIPCA-actuated flapping device , 2006 .

[12]  Robert J. Wood,et al.  Body torque modulation for a microrobotic fly , 2009, 2009 IEEE International Conference on Robotics and Automation.

[13]  Sergey V Shkarayev,et al.  Flight Dynamics of a Flapping-Wing Air Vehicle , 2009 .

[14]  J. Gordon Leishman,et al.  Flowfield of a Rotating-Wing Micro Air Vehicle , 2007 .

[15]  M. Dickinson,et al.  Wing rotation and the aerodynamic basis of insect flight. , 1999, Science.

[16]  Isao Shimoyama,et al.  Flight dynamics of a butterfly-type ornithopter , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[17]  Joon-Hyuk Park,et al.  Designing a Biomimetic Ornithopter Capable of Sustained and Controlled Flight , 2008 .

[18]  R. Zbikowski,et al.  Insectlike Flapping Wings in the Hover Part I: Effect of Wing Kinematics , 2008 .

[19]  Sanjay P Sane,et al.  The aerodynamics of insect flight , 2003, Journal of Experimental Biology.

[20]  Koji Isogai,et al.  Experimental and numerical study of forward flight aerodynamics of insect flapping wing , 2009 .

[21]  C. Ellington.  The novel aerodynamics of insect flight: applications to micro-air vehicles. , 1999, The Journal of experimental biology.

[22]  Sunil K. Agrawal,et al.  Biologically Inspired Design Of Small Flapping Wing Air Vehicles Using Four-Bar Mechanisms And Quasi-steady Aerodynamics , 2005 .