Determination of thermal emission spectra maximizing thermophotovoltaic performance using a genetic algorithm

Abstract Optimal radiator thermal emission spectra maximizing thermophotovoltaic (TPV) conversion efficiency and output power density are determined when thermal effects in the cell are considered. For this purpose, a framework is designed in which a TPV model that accounts for radiative, electrical and thermal losses is coupled with a genetic algorithm. The TPV device under study involves a spectrally selective radiator at a temperature of 2000 K, a gallium antimonide cell, and a cell thermal management system characterized by a fluid temperature and a heat transfer coefficient of 293 K and 600 Wm −2  K −1 . It is shown that a maximum conversion efficiency of 38.8% is achievable with an emission spectrum that has emissivity of unity between 0.719 eV and 0.763 eV and zero elsewhere. This optimal spectrum is less than half of the width of the spectra obtained when thermal losses in the cell are neglected. A maximum output power density of 41,708 Wm −2 is achievable with a radiator spectrum having emissivity values of unity between 0.684 eV and 1.082 eV and zero elsewhere when thermal losses are accounted for. These emission spectra are shown to greatly outperform blackbody and tungsten radiators, and could be obtained using artificial structures such as metamaterials or photonic crystals.

[1]  M. Francoeur.  NEAR-FIELD RADIATIVE TRANSFER: THERMAL RADIATION, THERMOPHOTOVOLTAIC POWER GENERATION AND OPTICAL CHARACTERIZATION , 2010 .

[2]  Enas Sakr,et al.  High efficiency rare-earth emitter for thermophotovoltaic applications , 2014 .

[3]  R. C. Fleming,et al.  High-temperature Stability and Selective Thermal Emission of Polycrystalline Tantalum Photonic Crystals References and Links , 2022 .

[4]  C. Algora,et al.  Global optimization of solar thermophotovoltaic systems , 2012 .

[5]  M. Green,et al.  Physics of the temperature coefficients of solar cells , 2015 .

[6]  Shanhui Fan,et al.  Absorber and emitter for solar thermo-photovoltaic systems to achieve efficiency exceeding the Shockley-Queisser limit. , 2009, Optics express.

[7]  Impacts of propagating, frustrated and surface modes on radiative, electrical and thermal losses in nanoscale-gap thermophotovoltaic power generators , 2013, Scientific reports.

[8]  P. Würfel,et al.  Theoretical limits of thermophotovoltaic solar energy conversion , 2003 .

[9]  M. Soljačić,et al.  Toward high-energy-density, high-efficiency, and moderate-temperature chip-scale thermophotovoltaics , 2013, Proceedings of the National Academy of Sciences.

[10]  Christophe Menezo,et al.  Modeling of coupled spectral radiation, thermal and carrier transport in a silicon photovoltaic cell , 2006 .

[11]  Carlos Algora,et al.  Development and experimental evaluation of a complete solar thermophotovoltaic system , 2012 .

[12]  Z. Jacob,et al.  High temperature epsilon-near-zero and epsilon-near-pole metamaterial emitters for thermophotovoltaics. , 2012, Optics express.

[13]  Keunhan Park,et al.  Performance analysis of near-field thermophotovoltaic devices considering absorption distribution , 2008 .

[14]  K. Qiu,et al.  Direct thermal to electrical energy conversion using very low bandgap TPV cells in a gas-fired furnace system , 2014 .

[15]  David Turnbull,et al.  Heat of crystallization and melting point of amorphous silicon , 1983 .

[16]  Philippe Ben-Abdallah,et al.  Ab initio design of coherent thermal sources , 2007 .

[17]  K. Qiu,et al.  Development of a silicon concentrator solar cell based TPV power system , 2006 .

[18]  P. Bermel,et al.  Prospects for high-performance thermophotovoltaic conversion efficiencies exceeding the Shockley–Queisser limit , 2015 .

[19]  K. Qiu,et al.  Thermophotovoltaic generation of electricity in a gas fired heater: Influence of radiant burner configurations and combustion processes , 2003 .

[20]  B. D. Wedlock.  Thermo-photo-voltaic energy conversion , 1963 .

[21]  Gennady Shvets,et al.  Metamaterial-based integrated plasmonic absorber/emitter for solar thermo-photovoltaic systems , 2011 .

[22]  Frank Dimroth,et al.  III-V compounds for solar cell applications , 1999 .

[23]  R. Carminati,et al.  Near-field thermophotovoltaic energy conversion , 2006 .

[24]  Steven G. Johnson,et al.  Design and global optimization of high-efficiency thermophotovoltaic systems. , 2010, Optics express.

[25]  Carlos Algora,et al.  III‐V concentrator solar cell reliability prediction based on quantitative LED reliability data , 2007 .

[26]  M. Pinar Mengüç,et al.  Solution of near-field thermal radiation in one-dimensional layered media using dyadic Green's functions and the scattering matrix method , 2009 .

[27]  Y. X. Yeng,et al.  Solar thermophotovoltaic energy conversion systems with two-dimensional tantalum photonic crystal absorbers and emitters , 2014 .

[28]  O. Dupré,et al.  Optimizations of photovoltaic cells including the minimization of internal heat sources , 2014 .

[29]  Thomas Bauer,et al.  Thermophotovoltaics: Basic Principles and Critical Aspects of System Design , 2011 .

[30]  Yong Shuai,et al.  Thermophotovoltaic emitters based on a two-dimensional grating/thin-film nanostructure , 2013 .

[31]  J. Greffet,et al.  Mesoscopic description of radiative heat transfer at the nanoscale. , 2010, Physical review letters.

[32]  David M. Bierman,et al.  A nanophotonic solar thermophotovoltaic device. , 2014, Nature nanotechnology.

[33]  R. Masoudi Nejad,et al.  A Survey on Performance of Photovoltaic Systems in Iran , 2015 .

[34]  M. Pinar Mengüç,et al.  Thermal Radiation Heat Transfer , 2020 .

[35]  M. Pinar Mengüç,et al.  Thermal Impacts on the Performance of Nanoscale-Gap Thermophotovoltaic Power Generators , 2011, IEEE Transactions on Energy Conversion.

[36]  Carlos Algora,et al.  Detailed balance analysis of solar thermophotovoltaic systems made up of single junction photovoltaic cells and broadband thermal emitters , 2010 .

[37]  Mahmoud Elzouka,et al.  Towards a near-field concentrated solar thermophotovoltaic microsystem: Part I – Modeling , 2017 .