Effect of Tip Clearance on the Prediction of Nonsynchronous Vibrations in Axial Compressors

[1]  Huu Duc Vo.  Role of tip clearance flow on axial compressor stability , 2001 .

[2]  D. C. Wisler,et al.  A Study of Casing Treatment Stall Margin Improvement Phenomena , 1975 .

[3]  Alan H. Epstein,et al.  Active Stabilization of Rotating Stall in a Three-Stage Axial Compressor , 1994 .

[4]  Chunill Hah,et al.  An Experimental and Numerical Investigation into the Mechanisms of Rotating Instability , 2001 .

[5]  Jeffrey P. Thomas,et al.  Efficient Design Method for Non-Synchronous Vibrations Using Enforced Motion , 2008 .

[6]  Edward M. Greitzer,et al.  Turbomachinery Committee Best 1994 Paper Award: Dynamic Control of Rotating Stall in Axial Flow Compressors Using Aeromechanical Feedback , 1995 .

[7]  D. C. Wisler,et al.  Improved compressor performance using recessed clearance (trenches) , 1989 .

[8]  Huu Duc Vo.  Role of Tip Clearance Flow in the Generation of Non- Synchronous Vibrations , 2006 .

[9]  Huu Duc Vo,et al.  Blade Tip Clearance Flow and Compressor Nonsynchronous Vibrations: The Jet Core Feedback Theory as the Coupling Mechanism , 2009 .

[10]  Huu Duc Vo,et al.  Numerical Investigation Into Non-Synchronous Vibrations of Axial Flow Compressors by the Resonant Tip Clearance Flow , 2009 .

[11]  Edward M. Greitzer,et al.  Dynamic Control of Rotating Stall in Axial Flow Compressors Using Aeromechanical Feedback , 1994 .

[12]  Bhaskar Roy,et al.  Experimental Study of Boundary Layer Control Through Tip Injection on Straight and Swept Compressor Blades , 2005 .

[13]  Feng Lin,et al.  Long-to-Short Length-Scale Transition: A Stall Inception Phenomenon in an Axial Compressor With Inlet Distortion , 2006 .

[14]  Jeffrey P. Thomas,et al.  Blade Excitation by Aerodynamic Instabilities: A Compressor Blade Study , 2003 .

[15]  M. Baumgartner,et al.  Non-Engine Order Blade Vibration in a High Pressure Compressor , 1995 .

[16]  W. Neise,et al.  ROTATING BLADE FLOW INSTABILITY AS A SOURCE OF NOISE IN AXIAL TURBOMACHINES , 1997 .

[17]  A B McKenzie,et al.  Application of casing treatment to an industrial axial-flow fan , 1998 .

[18]  Gang Xu,et al.  Micro Air Injection and Its Unsteady Response in a Low-Speed Axial Compressor , 2002 .

[19]  Dirk C. Leinhos,et al.  Stall inception in the compressor system of a turbofan engine , 2000 .

[20]  W. Neise,et al.  Experimental Study of Tip Clearance Losses and Noise in Axial Turbomachines , 1997 .

[21]  Konrad Vogeler,et al.  Rotating Instabilities in an Axial Compressor Originating From the Fluctuating Blade Tip Vortex , 2000 .

[22]  Aamir Shabbir,et al.  Flow Mechanism for Stall Margin Improvement due to Circumferential Casing Grooves on Axial Compressors , 2005 .

[23]  Peter Alexander Seitz.  Casing treatment for axial flow compressors. , 1999 .

[24]  Huu Duc Vo,et al.  Blade Tip Clearance Flow and Compressor NSV: The Jet Core Feedback Theory as the Coupling Mechanism , 2007 .

[25]  Masato Furukawa,et al.  Propagation of Multiple Short-Length-Scale Stall Cells in an Axial Compressor Rotor , 2000 .

[26]  Ivor Day.  Stall inception in axial flow compressors , 1993 .

[27]  Huu Duc Vo,et al.  Criteria for Spike Initiated Rotating Stall , 2005 .

[28]  Heinz-Peter Schiffer,et al.  SHORT LENGTH-SCALE ROTATING STALL INCEPTION IN A TRANSONIC AXIAL COMPRESSOR - CRITERIA AND MECHANISMS , 2006 .

[29]  N. Cumpsty,et al.  Tip Leakage Flow in Axial Compressors , 1991 .

[30]  R. L. Elder,et al.  Application of recess vaned casing treatment to axial flow fans , 1990 .