Design and fabrication of a polarization-independent two-port beam splitter.

We design and manufacture a fused-silica polarization-independent two-port beam splitter grating. The physical mechanism of this deeply etched grating can be shown clearly by using the simplified modal method with consideration of corresponding accumulated phase difference of two excited propagating grating modes, which illustrates that the binary-phase fused-silica grating structure depends little on the incident wavelength, but mainly on the ratio of groove depth to grating period and the ratio of incident wavelength to grating period. These analytic results would also be very helpful for wavelength bandwidth analysis. The exact grating profile is optimized by using the rigorous coupled-wave analysis. Holographic recording technology and inductively coupled plasma etching are used to manufacture the fused-silica grating. Experimental results agree well with the theoretical values.

[1]  Andreas Tünnermann,et al.  Investigation of the polarization-dependent diffraction of deep dielectric rectangular transmission gratings illuminated in Littrow mounting. , 2007, Applied optics.

[2]  James G. Fujimoto,et al.  Ultrabroadband beam splitter with matched group-delay dispersion. , 2005 .

[3]  Changhe Zhou,et al.  Optimized condition for etching fused-silica phase gratings with inductively coupled plasma technology. , 2005, Applied optics.

[4]  A. Tünnermann,et al.  Reflective diffractive beam splitter for laser interferometers. , 2007, Applied Optics.

[5]  Jérôme Hazart,et al.  A transmission polarizing beam splitter grating , 1999 .

[6]  Philippe Bouchut,et al.  Design, optical characterization, and operation of large transmission gratings for the laser integration line and laser megajoule facilities. , 2005, Applied optics.

[7]  T. Gaylord,et al.  Formulation for stable and efficient implementation of the rigorous coupled-wave analysis of binary gratings , 1995 .

[8]  G. Cincotti,et al.  Diffractive variable beam splitter: optimal design. , 2000, Journal of the Optical Society of America. A, Optics, image science, and vision.

[9]  Alexander V. Tishchenko,et al.  Phenomenological representation of deep and high contrast lamellar gratings by means of the modal method , 2005 .

[10]  Jens Limpert,et al.  Highly efficient transmission gratings in fused silica for chirped-pulse amplification systems. , 2003, Applied optics.

[11]  Ross C. McPhedran,et al.  The Dielectric Lamellar Diffraction Grating , 1981 .

[12]  A. Tünnermann,et al.  An intelligible explanation of highly-efficient diffraction in deep dielectric rectangular transmission gratings. , 2005, Optics express.

[13]  Changhe Zhou,et al.  Wideband two-port beam splitter of a binary fused-silica phase grating. , 2008, Applied optics.

[14]  P. Lalanne,et al.  Highly improved convergence of the coupled-wave method for TM polarization and conical mountings , 1996, Diffractive Optics and Micro-Optics.

[15]  Changhe Zhou,et al.  Polarizing beam splitter of deep-etched triangular-groove fused-silica gratings. , 2008, Optics letters.

[16]  Changhe Zhou,et al.  Miniature pulse compressor of deep-etched gratings. , 2008, Applied optics.

[17]  Changhe Zhou,et al.  Three-port beam splitter of a binary fused-silica grating. , 2008, Applied optics.

[18]  Roel Baets,et al.  Polarization-selective beam splitter based on a highly efficient simple binary diffraction grating. , 2004, Applied optics.

[19]  Changhe Zhou,et al.  Modal analysis of deep-etched low-contrast two-port beam splitter grating , 2008 .

[20]  Changhe Zhou,et al.  Polarizing beam splitter of a deep-etched fused-silica grating. , 2007, Optics letters.