A high-efficiency high step-up DC-DC converter with passive clamped coupled-inductor and voltage double cells

In this paper, a novel high-voltage gain converter is proposed, which is based on passive clamp coupled inductor, and two voltage double cells are added to extend the voltage gain. The voltage stress on the main switch is reduced with a passive clamp circuit; low on-state resistance of the main switch can be adopted to reduce the conduction loss. Furthermore, zero-current-switching turn-on is achieved to reduce the switching losses by introducing the small resonant inductor and the leakage inductors of coupled inductor. In addition, the reverse-recovery problems of the diodes are alleviated. The operating principle and steady-state analysis of the proposed converter are discussed in detail. Finally, a prototype is implemented to verify theoretical analysis.

[1]  R. Gules,et al.  Voltage Multiplier Cells Applied to Non-Isolated DC–DC Converters , 2008, IEEE Transactions on Power Electronics.

[2]  N. Vazquez,et al.  The Tapped-Inductor Boost Converter , 2007, 2007 IEEE International Symposium on Industrial Electronics.

[3]  Xuefeng Hu,et al.  A High Voltage Gain DC–DC Converter Integrating Coupled-Inductor and Diode–Capacitor Techniques , 2014, IEEE Transactions on Power Electronics.

[4]  Gun-Woo Moon,et al.  Nonisolated High Step-up Boost Converter Integrated With Sepic Converter , 2010, IEEE Transactions on Power Electronics.

[5]  Yaow-Ming Chen,et al.  Boost Converter with Coupled Inductors and Buck-Boost Type of Active Clamp , 2005 .

[6]  Henry Shu-Hung Chung,et al.  Development of a switched-capacitor DC-DC converter with bidirectional power flow , 2000 .

[7]  R.A. da Camara,et al.  Boost based on three-state switching cell for UPS applications , 2009, 2009 Brazilian Power Electronics Conference.

[8]  Adrian Ioinovici,et al.  Switched-Capacitor/Switched-Inductor Structures for Getting Transformerless Hybrid DC–DC PWM Converters , 2008, IEEE Transactions on Circuits and Systems I: Regular Papers.

[9]  Quan Li,et al.  A Review of the Single Phase Photovoltaic Module Integrated Converter Topologies With Three Different DC Link Configurations , 2008, IEEE Transactions on Power Electronics.

[10]  Fang Lin Luo,et al.  Six self-lift DC-DC converters, voltage lift technique , 2001, IEEE Trans. Ind. Electron..

[11]  René P. Torrico-Bascope,et al.  Highly Efficient High Step-Up Converter for Fuel-Cell Power Processing Based on Three-State Commutation Cell , 2010, IEEE Transactions on Industrial Electronics.

[12]  Esam H. Ismail,et al.  High voltage gain single-switch non-isolated DC-DC converters for renewable energy applications , 2010, 2010 IEEE International Conference on Sustainable Energy Technologies (ICSET).

[13]  Chung-Yuen Won,et al.  Improved non-isolated high voltage gain boost converter using coupled inductors , 2011, 2011 International Conference on Electrical Machines and Systems.

[14]  Yungtaek Jang,et al.  Interleaved Boost Converter With Intrinsic Voltage-Doubler Characteristic for Universal-Line PFC Front End , 2007, IEEE Transactions on Power Electronics.

[15]  Masahiro Kinoshita,et al.  Redundant High-Density High-Efficiency Double-Conversion Uninterruptible Power System , 2010 .

[16]  Yi Zhao,et al.  Design and Analysis of a Grid-Connected Photovoltaic Power System , 2010, IEEE Transactions on Power Electronics.