Recent Progress in Electrohydrodynamic Jet Printing for Printed Electronics: From 0D to 3D Materials

Advanced micro/nano-flexible sensors, displays, electronic skins, and other related devices provide considerable benefits compared to traditional technologies, aiding in the compactness of devices, enhancing energy efficiency, and improving system reliability. The creation of cost-effective, scalable, and high-resolution fabrication techniques for micro/nanostructures built from optoelectronic materials is crucial for downsizing to enhance overall efficiency and boost integration density. The electrohydrodynamic jet (EHD) printing technology is a novel additive manufacturing process that harnesses the power of electricity to create fluid motion, offering unparalleled benefits and a diverse spectrum of potential uses for microelectronic printing in terms of materials, precision, accuracy, and cost-effectiveness. This article summarizes various applications of EHD printing by categorizing them as zero-dimensional (0D), one-dimensional (1D), two-dimensional (2D), and three-dimensional (3D) printing materials. Zero-dimensional (quantum dot) materials are predominantly utilized in LED applications owing to their superb optoelectronic properties, high color fidelity, adjustable color output, and impressive fluorescence quantum yield. One- and two-dimensional materials are primarily employed in FET and sensor technologies due to their distinctive physical structure and exceptional optoelectronic properties. Three-dimensional materials encompass nanometals, nanopolymers, nanoglass, and nanoporous materials, with nanometals and nanopolymers finding widespread application in EHD printing technology. We hope our work will facilitate the development of small-feature-size, large-scale flexible electronic devices via EHD printing.

[1]  A. Dahiya,et al.  Out‐of‐Plane Electronics on Flexible Substrates Using Inorganic Nanowires Grown on High‐Aspect‐Ratio Printed Gold Micropillars , 2023, Advanced materials.

[2]  Jiayun Feng,et al.  Electrohydrodynamic Printing of Ultrafine and Highly Conductive Ag Electrodes for Various Flexible Electronics , 2023, Advanced Materials Technologies.

[3]  Atul S. Sharma,et al.  A numerical study on breakup of a liquid jet in an axial electric field , 2023, Journal of Aerosol Science.

[4]  Yong Zhu,et al.  Stretchable Organic Transistor Based Pressure Sensor Employing a Porous Elastomer Gate Dielectric , 2023, Advanced Materials Technologies.

[5]  Dazhi Wang,et al.  Nib-Assisted Coaxial Electrohydrodynamic Jet Printing for Nanowires Deposition , 2023, Nanomaterials.

[6]  Z. Wang,et al.  PZT Composite Film Preparation and Characterization Using a Method of Sol-Gel and Electrohydrodynamic Jet Printing , 2023, Micromachines.

[7]  Yan Peng,et al.  Monolayer Oxidized‐MXene Piezo‐Resonators with Single Resonant Peak by Interior Schottky Effect , 2023, Advanced Functional Materials.

[8]  Dazhi Wang,et al.  Computational Study of Drop-on-Demand Coaxial Electrohydrodynamic Jet and Printing Microdroplets , 2023, Micromachines.

[9]  S. S. Bahga,et al.  Physics of moderately stretched electrified jets in electrohydrodynamic jet printing. , 2023, Physical review. E.

[10]  Dazhi Wang,et al.  Substrate‐Independent Electrohydrodynamic Jet Printing with Dual‐Ring Electrostatic Focusing Structure , 2023, Advanced Materials Technologies.

[11]  P. Matteini,et al.  Review of the Versatile Patterning Methods of Ag Nanowire Electrodes , 2023, Coatings.

[12]  G. Zheng,et al.  Fast on–off controlling of electrohydrodynamic printing based on AC oscillation induced voltage , 2023, Scientific Reports.

[13]  Tong Yang,et al.  Design and Print Terahertz Metamaterials Based on Electrohydrodynamic Jet , 2023, Micromachines.

[14]  Dongwoon Shin,et al.  Controlled initiation and termination of jetting in near-field electrospinning through voltage-driven surface charge manipulation , 2023, Journal of Manufacturing Processes.

[15]  Yi Yang,et al.  Numerical investigation of the effect of operating parameters on droplet ejection in a double ring electrohydrodynamic printing device , 2023, Journal of Electrostatics.

[16]  Yuanfen Chen,et al.  Prediction of Both E-Jet Printing Ejection Cycle Time and Droplet Diameter Based on Random Forest Regression , 2023, Micromachines.

[17]  A. Moosavi,et al.  Pulsed coaxial drop-on-demand electrohydrodynamic printing , 2023, The Physics of Fluids.

[18]  D. Byun,et al.  Drop-on-Demand Electrohydrodynamic Jet Printing of Microlens Array on Flexible Substrates , 2023, ACS Applied Polymer Materials.

[19]  S. S. Bahga,et al.  Rapid prototyping of polydimethylsiloxane (PDMS) microchips using electrohydrodynamic jet printing: Application to electrokinetic assays , 2023, Electrophoresis.

[20]  H. Zou,et al.  Fabrication of a Polymer Nano Nozzle for Electrohydrodynamic Small-Molecule Solvent Inkjet Printing , 2023, ACS Applied Nano Materials.

[21]  S. Jayasinghe Electrospray printing: Unravelling the history of a support free three-dimensional additive manufacturing technology , 2023, Materials Today.

[22]  Haibo Yu,et al.  Novel Optofluidic Imaging System Integrated with Tunable Microlens Arrays. , 2023, ACS applied materials & interfaces.

[23]  Fei Liu,et al.  High-Performance PbI_2 Photodetector Constructed by Electrohydrodynamic Jet-Printing Method , 2023, Journal of Electronic Materials.

[24]  D. Ye,et al.  Modeling and analysis of electrohydrodynamic printing under various pulsed voltage waveforms , 2023, Microfluidics and Nanofluidics.

[25]  Gang Liu,et al.  Electric field driven printing of repeatable random metal meshes for flexible transparent electrodes , 2023, Optics & Laser Technology.

[26]  Kuipeng Zhao,et al.  Fabrication and characterization of a tiny PZT thick-film longitudinal-bending coupled drive vibrator using electrohydrodynamic jet printing , 2023, Ceramics International.

[27]  Woon-Seop Choi,et al.  Improved Electrical Properties of EHD Jet-Patterned MoS2 Thin-Film Transistors with Printed Ag Electrodes on a High-k Dielectric , 2023, Nanomaterials.

[28]  Chengming Jiang,et al.  Flexible pressure visualization equipment for human-computer interaction , 2023, Materials Today Sustainability.

[29]  R. Chang,et al.  A holistic model for melt electrowritten three-dimensional structured materials based on residual charge , 2022, International journal of bioprinting.

[30]  Y. Liu,et al.  Near thermal-electric field controlled electrohydrodynamic 3D printing of high aspect ratio microstructures , 2022, Journal of Micromechanics and Microengineering.

[31]  Chengming Jiang,et al.  Ultralarge Curvature and Extreme Rapid Degradable Porous Wood Based Flexible Triboelectric Sensor for Physical Motion Monitoring , 2022, Advanced Materials Technologies.

[32]  Guangming Zhang,et al.  The theoretical model and verification of electric-field-driven jet 3D printing for large-height and conformal micro/nano-scale parts , 2022, Virtual and Physical Prototyping.

[33]  Kyungho Park,et al.  Visible Light-Driven Indium-Gallium-Zinc-Oxide Optoelectronic Synaptic Transistor with Defect Engineering for Neuromorphic Computing System and Artificial Intelligence , 2022, SSRN Electronic Journal.

[34]  J. Cho,et al.  Evaluation of Temperature Sensors for Detection of Heat Sources Using Additive Printing Method , 2022, Sensors.

[35]  Y. Duan,et al.  Mode-tunable, micro/nanoscale electrohydrodynamic deposition techniques for optoelectronic device fabrication. , 2022, Nanoscale.

[36]  Ju-Hun Ahn,et al.  Electrohydrodynamic ink-jet printing characteristics of inks for temperature measurements , 2022, Materials Science and Engineering: B.

[37]  Ho Won Jang,et al.  Technological Breakthroughs in Chip Fabrication, Transfer, and Color Conversion for High‐Performance Micro‐LED Displays , 2022, Advanced materials.

[38]  Jinhui Song,et al.  Ultraviolet‐Sensitive OLED with Tunable Wavelength and Intensity by Integrated ZnO Nanowires Schottky Junction , 2022, Advanced Optical Materials.

[39]  Chengming Jiang,et al.  Ultra-Fast-Responsivity with Sharp Contrast Integrated Flexible Piezo Electrochromic Based Tactile Sensing Display , 2022, Nano Energy.

[40]  Chengming Jiang,et al.  Recent Progress of Sulfur Cathodes and Other Components for Flexible Lithium-Sulfur Batteries , 2022, Materials Today Sustainability.

[41]  Huaizhong Xu,et al.  Melt electrowriting: A study of jet diameters and jet speeds along the spinline , 2022, Polymers for Advanced Technologies.

[42]  Xinran Zheng,et al.  High-resolution flexible electronic devices by electrohydrodynamic jet printing: From materials toward applications , 2022, Science China Materials.

[43]  Dazhi Wang,et al.  The Focused Electrode Ring for Electrohydrodynamic Jet and Printing on Insulated Substrate , 2022, International Journal of Precision Engineering and Manufacturing.

[44]  Chengming Jiang,et al.  Near‐Infrared to Visible Light Converter by Integrating Graphene Transistor into Perovskite Quantum Dot Light Emitting Diodes , 2022, Advanced Materials Technologies.

[45]  Y. Duan,et al.  Critical Size/Viscosity for Coffee-Ring-Free Printing of Perovskite Micro/Nanopatterns. , 2022, ACS applied materials & interfaces.

[46]  Yang Yang,et al.  Stability-limiting heterointerfaces of perovskite photovoltaics , 2022, Nature.

[47]  Linlin Li,et al.  Emerging polymeric electrospun fibers: From structural diversity to application in flexible bioelectronics and tissue engineering , 2022, Exploration.

[48]  Zhentao Wang,et al.  Varicose-whipping instabilities transition of an electrified micro-jet in electrohydrodynamic cone-jet regime , 2022, International Journal of Multiphase Flow.

[49]  Jun Chen,et al.  A Personalized Acoustic Interface for Wearable Human–Machine Interaction , 2021, Advanced Functional Materials.

[50]  H. Bhaskaran,et al.  Electrohydrodynamic Jet Printing: Introductory Concepts and Considerations , 2021, Small Science.

[51]  P. Dalton,et al.  The Multiweek Thermal Stability of Medical-Grade Poly(ε-caprolactone) During Melt Electrowriting. , 2021, Small.

[52]  Ju-Hun Ahn,et al.  Temperature-Sensing Inks Using Electrohydrodynamic Inkjet Printing Technology , 2021, Materials.

[53]  Se Hyun Kim,et al.  Electrohydrodynamic‐Printed Polyvinyl Alcohol‐Based Gate Insulators for Organic Integrated Devices , 2021, Advanced Engineering Materials.

[54]  K. Kalantar-zadeh,et al.  Nanotip Formation from Liquid Metals for Soft Electronic Junctions. , 2021, ACS applied materials & interfaces.

[55]  Liwei Lin,et al.  Electrohydrodynamic 3D printing of orderly carbon/nickel composite network as supercapacitor electrodes , 2021 .

[56]  T. A. Qasuria,et al.  A low-cost printed humidity sensor on cellulose substrate by EHD printing , 2021, Journal of Materials Research.

[57]  Yongan Huang,et al.  Enhancing pulsed electrohydrodynamic printing frequency via high-order-mode ejection , 2021, Physics of Fluids.

[58]  R. Yao,et al.  48.3: Ag Ink Patterning and Application Using Electrohydrodynamic Jet Printing , 2021 .

[59]  Wanting Sun,et al.  Advances in Piezoelectric Jet and Atomization Devices , 2021, Applied Sciences.

[60]  Yongan Huang,et al.  High‐Resolution, Flexible, and Full‐Color Perovskite Image Photodetector via Electrohydrodynamic Printing of Ionic‐Liquid‐Based Ink , 2021, Advanced Functional Materials.

[61]  Troy Y. Ansell Current Status of Liquid Metal Printing , 2021, Journal of Manufacturing and Materials Processing.

[62]  Se Hyun Kim,et al.  Engineering Aggregation‐Resistant MXene Nanosheets As Highly Conductive and Stable Inks for All‐Printed Electronics , 2021, Advanced Functional Materials.

[63]  Yuechao Wang,et al.  High-resolution additive direct writing of metal micro/nanostructures by electrohydrodynamic jet printing , 2021 .

[64]  P. Kidmose,et al.  Droplet‐Based Techniques for Printing of Functional Inks for Flexible Physical Sensors , 2021, Advanced materials.

[65]  Woon-Seop Choi,et al.  EHD-jet patterned MoS2 on a high-k dielectric for high mobility in thin film transistor applications , 2021, Nanotechnology.

[66]  M. Cullinan,et al.  Current challenges and potential directions towards precision microscale additive manufacturing – Part I: Direct ink writing/jetting processes , 2021 .

[67]  Yu Wang,et al.  Microfluidics for flexible electronics , 2021 .

[68]  Young-Jin Kwack,et al.  Drop-on-demand patterning of MoS2 using electrohydrodynamic jet printing for thin-film transistors , 2020 .

[69]  N. Dasgupta,et al.  Area-Selective Atomic Layer Deposition Patterned by Electrohydrodynamic Jet Printing for Additive Manufacturing of Functional Materials and Devices. , 2020, ACS nano.

[70]  B. Tao,et al.  Flexible discretely-magnetized configurable soft robots via laser-tuned selective transfer printing of anisotropic ferromagnetic cells , 2020 .

[71]  Dazhi Wang,et al.  Numerical simulation of electrohydrodynamic jet and printing micro-structures on flexible substrate , 2020, Microsystem Technologies.

[72]  P. Dalton,et al.  Melt Electrowritten In Vitro Radial Device to Study Cell Growth and Migration , 2020, Advanced biosystems.

[73]  Leandro dos Santos Coelho,et al.  Optimization of drop ejection frequency in EHD inkjet printing system using an improved Firefly Algorithm , 2020, Appl. Soft Comput..

[74]  Wei Ling,et al.  The Evolution of Flexible Electronics: From Nature, Beyond Nature, and To Nature , 2020, Advanced science.

[75]  B. Kang,et al.  Simultaneously defined semiconducting channel layer using electrohydrodynamic jet printing of a passivation layer for oxide thin-film transistors. , 2020, ACS applied materials & interfaces.

[76]  X. Ren,et al.  High-resolution organic field-effect transistors manufactured by electrohydrodynamic inkjet printing of doped electrodes , 2020 .

[77]  Dichen Li,et al.  High-resolution electrohydrodynamic bioprinting: a new biofabrication strategy for biomimetic micro/nanoscale architectures and living tissue constructs , 2020, Biofabrication.

[78]  Se Hyun Kim,et al.  Direct Patterned Zinc-Tin-Oxide for Solution-Processed Thin-Film Transistors and Complementary Inverter through Electrohydrodynamic Jet Printing , 2020, Nanomaterials.

[79]  Kai Li,et al.  Drop-on-Demand Electrohydrodynamic Jet Printing of Graphene and Its Composite Microelectrode for High Performance Electrochemical Sensing , 2020 .

[80]  Michael J. Christoe,et al.  Exploring Electrochemical Extrusion of Wires from Liquid Metals. , 2020, ACS applied materials & interfaces.

[81]  J. Ding,et al.  Ultrafast Exfoliation of 2D Materials by Solvent Activation and One-step Fabrication of All-2D-Materials Photodetectors by Electrohydrodynamic Printing. , 2020, ACS applied materials & interfaces.

[82]  Hao Ling,et al.  Transparent, flexible and recyclable nanopaper-based touch sensors fabricated via inkjet-printing , 2020, Green Chemistry.

[83]  Chun H. Wang,et al.  Direct 3D Printing of Highly Anisotropic, Flexible, Constriction-Resistive Sensors for Multidirectional Proprioception in Soft Robots. , 2020, ACS applied materials & interfaces.

[84]  Zhong Lin Wang,et al.  A universal and arbitrary tactile interactive system based on self-powered optical communication , 2020 .

[85]  Ju-Hun Ahn,et al.  Electrical evaluations of anisotropic conductive film manufactured by electrohydrodynamic ink jet printing technology , 2020 .

[86]  D. Byun,et al.  Ultrahigh areal number density solid-state on-chip microsupercapacitors via electrohydrodynamic jet printing , 2020, Science Advances.

[87]  Dakshina Ranjan Kisku,et al.  A New Approach to Quantify the Uniformity Grade of the Electrohydrodynamic Inkjet Printed Features and Optimization of Process Parameters Using Nature-Inspired Algorithms , 2019, International Journal of Precision Engineering and Manufacturing.

[88]  M. Hong,et al.  Parallel Laser Micro/Nano‐Processing for Functional Device Fabrication , 2020, Laser & Photonics Reviews.

[89]  G. Zheng,et al.  Jet Mode Recognition of Electrohydrodynamic Direct-Writing Based on Micro/Nano Current , 2020, Micromachines.

[90]  Woon-Seop Choi,et al.  High‐Viscosity Copper Paste Patterning and Application to Thin‐Film Transistors Using Electrohydrodynamic Jet Printing , 2020, Advanced Engineering Materials.

[91]  T. Erdem,et al.  Multiplexed patterning of cesium lead halide perovskite nanocrystals by additive jet printing for efficient white light generation , 2020 .

[92]  Jonghwa Park,et al.  Transfer Printing of Electronic Functions on Arbitrary Complex Surfaces. , 2020, ACS nano.

[93]  Daniel S. Engstrøm,et al.  Printability of photo-sensitive nanocomposites using two-photon polymerization , 2020 .

[94]  Dakshina Ranjan Kisku,et al.  Modeling of EHD inkjet printing performance using soft computing-based approaches , 2019, Soft Computing.

[95]  Hyungdong Lee,et al.  Direct Patterning and Spontaneous Self-Assembly of Graphene Oxide via Electrohydrodynamic Jet Printing for Energy Storage and Sensing , 2019, Micromachines.

[96]  Guangda Niu,et al.  Coffee ring elimination and crystalline control of electrohydrodynamically printed high-viscosity perovskites , 2019, Journal of Materials Chemistry C.

[97]  Chengming Jiang,et al.  Highly enhanced performance of integrated piezo photo-transistor with dual inverted OLED gate and nanowire array channel , 2019 .

[98]  Yoon‐Kyoung Cho,et al.  Near-field electrospinning for 3D stacked nanoarchitectures with high aspect ratios. , 2019, Nano letters.

[99]  David J. Hoelzle,et al.  Robust Monotonically Convergent Spatial Iterative Learning Control: Interval Systems Analysis via Discrete Fourier Transform , 2019, IEEE Transactions on Control Systems Technology.

[100]  M. Madou,et al.  Instrument for fine control of drop-on-demand electrohydrodynamic jet printing by current measurement. , 2019, The Review of scientific instruments.

[101]  Se Hyun Kim,et al.  Electrohydrodynamic (EHD) jet printing of carbon-black composites for solution-processed organic field-effect transistors , 2019, Organic Electronics.

[102]  Woon-Seop Choi,et al.  Optimization of Quantum Dot Thin Films using Electrohydrodynamic Jet Spraying for Solution-Processed Quantum Dot Light-Emitting Diodes , 2019, Scientific Reports.

[103]  Lianqing Liu,et al.  High‐Resolution and Controllable Nanodeposition Pattern of Ag Nanoparticles by Electrohydrodynamic Jet Printing Combined with Coffee Ring Effect , 2019, Advanced Materials Interfaces.

[104]  Ananthakumar Ramadoss,et al.  A review on inkjet printing of nanoparticle inks for flexible electronics , 2019, Journal of Materials Chemistry C.

[105]  Guangda Niu,et al.  Electrohydrodynamically Printed High‐Resolution Full‐Color Hybrid Perovskites , 2019, Advanced Functional Materials.

[106]  Chengming Jiang,et al.  High Performance Vertical Resonant Photo-Effect-Transistor with an All-Around OLED-Gate for Ultra-Electromagnetic Stability. , 2019, ACS nano.

[107]  Dakshina Ranjan Kisku,et al.  Experimentation modelling and optimization of electrohydrodynamic inkjet microfabrication approach: a Taguchi regression analysis , 2019, Sādhanā.

[108]  Young-Jin Kwack,et al.  Patterning and passivation effects of zinc-tin-oxide thin-film transistors using an electrohydrodynamic jet printer , 2019, Materials Research Bulletin.

[109]  Se Hyun Kim,et al.  Cone-jet printing of aligned silver nanowire/poly(ethylene oxide) composite electrodes for organic thin-film transistors , 2019, Organic Electronics.

[110]  Sang Hyun Park,et al.  Micro Light‐Emitting Diodes for Display and Flexible Biomedical Applications , 2019, Advanced Functional Materials.

[111]  Claudio U. Hail,et al.  Nanoprinted Quantum Dot–Graphene Photodetectors , 2019, Advanced Optical Materials.

[112]  Wei Gao,et al.  Flexible Electronics toward Wearable Sensing. , 2019, Accounts of chemical research.

[113]  Tae Whan Kim,et al.  Fluorescent Microarrays of in Situ Crystallized Perovskite Nanocomposites Fabricated for Patterned Applications by Using Inkjet Printing. , 2019, ACS nano.

[114]  P. Chahal,et al.  Printed Diodes: Materials Processing, Fabrication, and Applications , 2019, Advanced science.

[115]  Sung Ha Park,et al.  1D Fibers and 2D Patterns Made of Quantum Dot‐Embedded DNA via Electrospinning and Electrohydrodynamic Jet Printing , 2018, Advanced Materials Technologies.

[116]  E. Defay,et al.  Direct Patterning of Piezoelectric Thin Films by Inkjet Printing , 2018, Advanced Materials Technologies.

[117]  J. Rosell-Llompart,et al.  Electrosprays in the cone-jet mode: From Taylor cone formation to spray development , 2018, Journal of Aerosol Science.

[118]  J. M. López-Herrera,et al.  Review on the physics of electrospray: From electrokinetics to the operating conditions of single and coaxial Taylor cone-jets, and AC electrospray , 2018, Journal of Aerosol Science.

[119]  Jiankang He,et al.  Electrohydrodynamic Printing of Microscale PEDOT:PSS-PEO Features with Tunable Conductive/Thermal Properties. , 2018, ACS applied materials & interfaces.

[120]  Yiwei Han,et al.  Electrohydrodynamic (EHD) Printing of Molten Metal Ink for Flexible and Stretchable Conductor with Self‐Healing Capability , 2018 .

[121]  Se Hyun Kim,et al.  Directionally Aligned Amorphous Polymer Chains via Electrohydrodynamic-Jet Printing: Analysis of Morphology and Polymer Field-Effect Transistor Characteristics. , 2017, ACS applied materials & interfaces.

[122]  I. Park,et al.  Micropatterning of metal oxide nanofibers by electrohydrodynamic (EHD) printing towards highly integrated and multiplexed gas sensor applications , 2017 .

[123]  Yewang Su,et al.  Hyper-stretchable self-powered sensors based on electrohydrodynamically printed, self-similar piezoelectric nano/microfibers , 2017 .

[124]  Yongan Huang,et al.  Helix Electrohydrodynamic Printing of Highly Aligned Serpentine Micro/Nanofibers , 2017, Polymers.

[125]  Yuan-Shin Lee,et al.  Fabrication and electrical characterization of multi-layer capacitive touch sensors on flexible substrates by additive e-jet printing , 2017 .

[126]  Wei Wu Inorganic nanomaterials for printed electronics: a review. , 2017, Nanoscale.

[127]  Doyoung Byun,et al.  Electromechanical reliability of a flexible metal-grid transparent electrode prepared by electrohydrodynamic (EHD) jet printing , 2016, Microelectron. Reliab..

[128]  Jinho Bae,et al.  All-printed humidity sensor based on graphene/methyl-red composite with high sensitivity , 2016 .

[129]  Gerd Grau,et al.  Gravure-printed electronics: recent progress in tooling development, understanding of printing physics, and realization of printed devices , 2016 .

[130]  Yong Jin Jeong,et al.  Direct patterning of conductive carbon nanotube/polystyrene sulfonate composites: Via electrohydrodynamic jet printing for use in organic field-effect transistors , 2016 .

[131]  K. Choi,et al.  Flexible and passive photo sensor based on perylene/graphene composite , 2015 .

[132]  Kukjoo Kim,et al.  Direct printing of reduced graphene oxide on planar or highly curved surfaces with high resolutions using electrohydrodynamics. , 2015, Small.

[133]  John A Rogers,et al.  High-resolution patterns of quantum dots formed by electrohydrodynamic jet printing for light-emitting diodes. , 2015, Nano letters.

[134]  D. Poulikakos,et al.  Near-field light design with colloidal quantum dots for photonics and plasmonics. , 2014, Nano letters.

[135]  Hyungdong Lee,et al.  Directly drawn poly(3-hexylthiophene) field-effect transistors by electrohydrodynamic jet printing: improving performance with surface modification. , 2014, ACS applied materials & interfaces.

[136]  Doyoung Byun,et al.  Ag dot morphologies printed using electrohydrodynamic (EHD) jet printing based on a drop-on-demand (DOD) operation , 2013 .

[137]  Yong-Young Noh,et al.  Large-scale organic nanowire lithography and electronics , 2013, Nature Communications.

[138]  W. Hwang,et al.  Direct ink-jet printing of silver nitrate–silver nanowire hybrid inks to fabricate silver conductive lines , 2012 .

[139]  K. Barton,et al.  Synthesis of model predictive control and iterative learning control for topography regulation in additive manufacturing , 2022, IFAC-PapersOnLine.

[140]  Yong Jin Jeong,et al.  Overview of recent progress in electrohydrodynamic jet printing in practical printed electronics: focus on the variety of printable materials for each component , 2021, Materials Advances.

[141]  A. Biswas,et al.  A review on multi nozzle electrohydrodynamic inkjet printing system for MEMS applications , 2021 .

[142]  S. Kawamura,et al.  Flexible self-powered multifunctional sensor for stiffness-tunable soft robotic gripper by multimaterial 3D printing , 2021 .

[143]  H. Bhaskaran,et al.  Electrohydrodynamic jet printed conducting polymer for enhanced chemiresistive gas sensors , 2021, Journal of Materials Chemistry C.

[144]  Se Hyun Kim,et al.  “Dragging mode” Electrohydrodynamic Jet Printing of Polymer-Wrapped Semiconducting Single-Walled Carbon Nanotube for NO Gas-Sensing Field-Effect Transistors , 2021, Journal of Materials Chemistry C.

[145]  Dazhi Wang,et al.  Numerical simulation of stable electrohydrodynamic cone-jet formation and printing on flexible substrate , 2021 .

[146]  Se Hyun Kim,et al.  Printed ion-gel transistor using electrohydrodynamic (EHD) jet printing process , 2018 .