Self-calibration of delta parallel robots with elastic deformation compensation
暂无分享,去创建一个
[1] Clément Gosselin,et al. Parametric Stiffness Analysis of the Orthoglide , 2004, ArXiv.
[2] Hanqi Zhuang,et al. Kinematic calibration of a Stewart platform using pose measurements obtained by a single theodolite , 1995, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots.
[3] Tatsuo Arai,et al. An implicit loop method for kinematic calibration and its application to closed-chain mechanisms , 1995, IEEE Trans. Robotics Autom..
[4] Kornel Ehmann,et al. Calibration of a hexapod machine tool using a redundant leg , 2000 .
[5] Wisama Khalil,et al. Calibration of parallel robots using two inclinometers , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).
[6] Wisama Khalil,et al. Self calibration of Stewart-Gough parallel robots without extra sensors , 1999, IEEE Trans. Robotics Autom..
[7] Hanqi Zhuang,et al. Self-calibration of parallel mechanisms with a case study on Stewart platforms , 1997, IEEE Trans. Robotics Autom..
[8] David Daney. Self Calibration of Gough Platform using leg mobility constraints , 1999 .
[9] Reymond Clavel,et al. Kinematic calibration of the parallel Delta robot , 1998, Robotica.
[10] Ming-Hwei Perng,et al. Self-calibration of a general hexapod manipulator with enhanced precision in 5-DOF motions , 2004 .
[11] Jean-Pierre Merlet,et al. Parallel Robots , 2000 .
[12] Hanqi Zhuang,et al. Calibration of stewart platforms and other parallel manipulators by minimizing inverse kinematic residuals , 1998, J. Field Robotics.