Effects of welding speed on welding process stability, microstructure and mechanical performance of SUS304 welded by local dry underwater pulsed MIG

[1]  Sanbao Lin,et al.  Effect of pulse current on droplet transfer behavior and weld formation of 304 stainless steel in local dry underwater pulse MIG welding , 2022, The International Journal of Advanced Manufacturing Technology.

[2]  Chuansong Wu,et al.  The mechanisms of underwater wet flux-cored arc welding assisted by ultrasonic frequency pulse high-current , 2022, Journal of Materials Processing Technology.

[3]  Conghui Zhang,et al.  Interfaces of the 5083Al/1060Al/TA1/Ni/SUS304 five-layer composite plate fabricated by explosive welding , 2022, Journal of Materials Research and Technology.

[4]  Jianing Wang,et al.  Sequentially combined thermo-mechanical and mechanical simulation of double-pulse MIG welding of 6061-T6 aluminum alloy sheets , 2022, Journal of Manufacturing Processes.

[5]  Xiaoqiang Zhang,et al.  A comprehensive analysis of ultrasonic pulse current reducing hot cracking in Inconel 718 welds , 2022, Materials Characterization.

[6]  D. Deng,et al.  A new numerical model to predict welding-induced sensitization in SUS304 austenitic stainless steel joint , 2022, Journal of Materials Research and Technology.

[7]  M. Landowski,et al.  Underwater wet welding of S1300 ultra-high strength steel , 2022, Marine Structures.

[8]  Duo Liu,et al.  Investigation of arc stability, microstructure evolution and corrosion resistance in underwater wet FCAW of duplex stainless steel , 2021, Journal of Materials Research and Technology.

[9]  Bo Chen,et al.  Influence of energy ratio on microstructure and mechanical properties in the transition zone of hybrid laser-MIG welded AH36/316L dissimilar joints , 2021, Journal of Materials Research and Technology.

[10]  Zhenmin Wang,et al.  Effect of pulse frequency on droplet transfer and weld formation in local dry underwater welding , 2021, Journal of Manufacturing Processes.

[11]  A. Bracarense,et al.  Effect of the welding angle on the porosity of underwater wet welds performed in overhead position at different simulated depths , 2021 .

[12]  Jijin Xu,et al.  Simultaneously enhanced strength and ductility of TIG welds in Inconel 718 super-alloy via ultrasonic pulse current , 2021, Materials Science and Engineering: A.

[13]  Yue Wu,et al.  The effects of fusion ratio on microstructure and cryogenic toughness of dissimilar joint between SA553 and SUS304 , 2021 .

[14]  N. Guo,et al.  Underwater laser welding for 304 stainless steel with filler wire , 2020 .

[15]  N. Guo,et al.  Investigation on the mass transfer control, process stability and welding quality during underwater pulse current FCAW for Q235 , 2019, Journal of Manufacturing Processes.

[16]  G. Song,et al.  Analysis of arc stability and bead forming with high-speed TW-GIA welding , 2019, Journal of Manufacturing Processes.

[17]  Zhenmin Wang,et al.  Local dry underwater welding of 304 stainless steel based on a microdrain cover , 2019, Journal of Materials Processing Technology.

[18]  Yuntao Song,et al.  Microstructure and mechanical properties of ultra-narrow gap laser weld joint of 100 mm-thick SUS304 steel plates , 2019, Journal of Materials Processing Technology.

[19]  Yonghua Shi,et al.  Microstructure evolution and mechanical performance of underwater local dry welded DSS metals at various simulated water depths , 2019, Journal of Materials Processing Technology.

[20]  Jie Yang,et al.  Effects of welding speed on bubble dynamics and process stability in mechanical constraint-assisted underwater wet welding of steel sheets , 2019, Journal of Materials Processing Technology.

[21]  Yonghua Shi,et al.  Microstructure and mechanical properties of underwater hyperbaric FCA-welded duplex stainless steel joints , 2018, Journal of Materials Processing Technology.

[22]  Yonghua Shi,et al.  Microstructure and corrosion behavior of S32101 stainless steel underwater dry and wet welded joints , 2018, Journal of Materials Processing Technology.

[23]  Liu Yibo,et al.  Effects of heat input on arc stability and weld quality in underwater wet flux-cored arc welding of E40 steel , 2018 .

[24]  Jianfeng Wang,et al.  Effect of ultrasonic vibration on microstructural evolution and mechanical properties of underwater wet welding joint , 2017 .

[25]  N. Guo,et al.  The effect of alumino-thermic addition on underwater wet welding process stability , 2017 .

[26]  Wei Xu,et al.  Microstructural and mechanical performance of underwater wet welded S355 steel , 2016 .

[27]  Jun Cao,et al.  Effect of cooling rate on microstructure, inclusions and mechanical properties of weld metal in simulated local dry underwater welding , 2015 .

[28]  Yixiong Wu,et al.  Investigation on microstructure and properties of dissimilar joint between SA553 and SUS304 made by laser welding with filler wire , 2015 .

[29]  Zongquan Deng,et al.  Study of underwater wet welding stability using an X-ray transmission method , 2015 .

[30]  M. Atapour,et al.  Microstructure and corrosion behavior of multipass gas tungsten arc welded 304L stainless steel , 2014 .