In vitro ultrasonic characterization of human cancellous femoral bone using transmission and backscatter measurements: relationships to bone mineral density.

Thirty-eight slices of pure trabecular bone 1-cm thickness were extracted from human proximal femurs. A pair of 1-MHz central frequency transducers was used to measure quantitative ultrasound (QUS) parameters in transmission [normalized broadband ultrasound attenuation (nBUA), speed of sound (SOS)] and in backscatter [broadband ultrasound backscatter (BUB)]. Bone mineral density (BMD) was measured using clinical x-ray quantitative computed tomography. Site-matched identical region of interest (ROIs) of 7 x 7 mm2 were positioned on QUS and QCT images. This procedure resulted in 605 ROIs for all the specimens data pooled together. The short-term precision of the technique expressed in terms of CV was found to be 2.3% for nBUA, 0.3% for SOS and 4.5% for BUB. Significant linear correlation between QUS and BMD were found for all the 605 ROIs pooled, with r2 values of 0.73, 0.77, and 0.58 for nBUA, SOS, and BUB, respectively (all p < 0.05). For the BUB, the best regression was obtained with a polynomial fit of second order (r2 = 0.63). An analysis of measurements errors was developed. It showed that the residual variability of SOS is almost completely predicted by measurements errors, which is not the case for BUA and BUB, suggesting a role for micro-architecture in the determination of BUA and BUB.

[1]  M. Jergas,et al.  Accurate assessment of precision errors: How to measure the reproducibility of bone densitometry techniques , 2005, Osteoporosis International.

[2]  A. J. Clarke,et al.  The measurement of the velocity of ultrasound in fixed trabecular bone using broadband pulses and single-frequency tone bursts. , 1996, Physics in medicine and biology.

[3]  J. Bauer,et al.  Imaging of Trabecular Bone Structure , 2002, Seminars in musculoskeletal radiology.

[4]  P. Tothill,et al.  Comparisons between three dual-energy X-ray absorptiometers used for measuring spine and femur. , 1995, The British journal of radiology.

[5]  C C Glüer,et al.  Osteoporosis: association of recent fractures with quantitative US findings. , 1996, Radiology.

[6]  P. Rüegsegger,et al.  In vivo high resolution 3D-QCT of the human forearm. , 1998, Technology and health care : official journal of the European Society for Engineering and Medicine.

[7]  Y. Pao,et al.  On the determination of phase and group velocities of dispersive waves in solids , 1978 .

[8]  G. Breart,et al.  Ultrasonographic heel measurements to predict hip fracture in elderly women: the EPIDOS prospective study , 1996, The Lancet.

[9]  F. Patat,et al.  Bidirectional axial transmission can improve accuracy and precision of ultrasonic velocity measurement in cortical bone: a validation on test materials , 2004, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[10]  A. Laib,et al.  The dependence of ultrasonic backscatter on trabecular thickness in human calcaneus: theoretical and experimental results , 2003, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[11]  C. Langton,et al.  The measurement of broadband ultrasonic attenuation in cancellous bone. , 1984, Engineering in medicine.

[12]  P Rüegsegger,et al.  High-resolution three-dimensional-pQCT images can be an adequate basis for in-vivo μFE analysis of bone , 2001 .

[13]  H. Genant,et al.  Comparison of ultrasound and bone mineral density assessment of the calcaneus with different regions of interest in healthy early menopausal women. , 1999, Journal of clinical densitometry : the official journal of the International Society for Clinical Densitometry.

[14]  C. Turner,et al.  Ultrasonic velocity as a predictor of strength in bovine cancellous bone , 1991, Calcified Tissue International.

[15]  M. L. Bouxsein,et al.  Effect of Temperature on Ultrasonic Properties of the Calcaneus In Situ , 2002, Osteoporosis International.

[16]  C. Langton,et al.  Comparison of bone mineral density and quantitative ultrasound of the calcaneus: site-matched correlation and discrimination of axial BMD status. , 2000, The British journal of radiology.

[17]  G. Blake,et al.  Ultrasonic velocity measurements through the calcaneus: Which velocity should be measured? , 2005, Osteoporosis International.

[18]  K. Wear,et al.  The effects of frequency-dependent attenuation and dispersion on sound speed measurements: applications in human trabecular bone , 2000, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[19]  C. M. Langton,et al.  Prediction of Human Femoral Bone Strength Using Ultrasound Velocity and BMD: An In Vitro Study , 1997, Osteoporosis International.

[20]  B. Stampa,et al.  Assessment of the Geometry of Human Finger Phalanges Using Quantitative Ultrasound In Vivo , 2000, Osteoporosis International.

[21]  Sharmila Majumdar,et al.  Magnetic Resonance Imaging of Trabecular Bone Structure , 2002, Topics in magnetic resonance imaging : TMRI.

[22]  P Rüegsegger,et al.  Do quantitative ultrasound measurements reflect structure independently of density in human vertebral cancellous bone? , 1998, Bone.

[23]  R. B. Ashman,et al.  Elastic modulus of trabecular bone material. , 1988, Journal of biomechanics.

[24]  C F Njeh,et al.  The ability of ultrasound velocity to predict the stiffness of cancellous bone in vitro. , 1997, Bone.

[25]  Pascal Laugier,et al.  Prediction of frequency-dependent ultrasonic backscatter in cancellous bone using statistical weak scattering model. , 2003, Ultrasound in medicine & biology.

[26]  H K Genant,et al.  A new method for quantitative ultrasound measurements at multiple skeletal sites: first results of precision and fracture discrimination. , 2000, Journal of clinical densitometry : the official journal of the International Society for Clinical Densitometry.

[27]  F Peyrin,et al.  Ultrasonic characterization of human cancellous bone using transmission and backscatter measurements: relationships to density and microstructure. , 2002, Bone.

[28]  P W Thompson,et al.  Quantitative ultrasound (QUS) of the heel predicts wrist and osteoporosis-related fractures in women age 45-75 years. , 1998, Journal of clinical densitometry : the official journal of the International Society for Clinical Densitometry.

[29]  M. Ooms,et al.  Ultrasound measurements in the calcaneus: precision and its relation with bone mineral density of the heel, hip, and lumbar spine. , 1996, Bone.

[30]  F. Padilla,et al.  In Vitro Ultrasound Measurement at the Human Femur , 2004, Calcified Tissue International.

[31]  P. Laugier,et al.  In vitro measurement of the frequency-dependent attenuation in cancellous bone between 0.2 and 2 MHz. , 2000, The Journal of the Acoustical Society of America.

[32]  K. Wear,et al.  Relationships of ultrasonic backscatter with ultrasonic attenuation, sound speed and bone mineral density in human calcaneus. , 2000, Ultrasound in medicine & biology.

[33]  P. Laugier,et al.  Velocity dispersion of acoustic waves in cancellous bone , 1998, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[34]  C F Njeh,et al.  Orthogonal relationships between ultrasonic velocity and material properties of bovine cancellous bone. , 1996, Medical engineering & physics.

[35]  Harry K. Genant,et al.  Broadband ultrasound attenuation predicts fractures strongly and independently of densitometry in older women. A prospective study. Study of Osteoporotic Fractures Research Group. , 1997, Archives of internal medicine.

[36]  P. Laugier,et al.  Assessment of the relationship between broadband ultrasound attenuation and bone mineral density at the calcaneus using BUA imaging and DXA , 2005, Osteoporosis International.

[37]  M. Osteaux,et al.  Quantitative ultrasound of the calcaneus with parametric imaging: correlation with bone mineral density at different sites and with anthropometric data in menopausal women. , 2000, European journal of radiology.

[38]  O. Johnell,et al.  Meta-analysis of how well measures of bone mineral density predict occurrence of osteoporotic fractures , 1996 .

[39]  P. Ross,et al.  Prediction of Fracture Risk by Radiographic Absorptiometry and Quantitative Ultrasound: A Prospective Study , 1998, Calcified Tissue International.

[40]  K. Wear.  Temperature dependence of ultrasonic attenuation in human calcaneus. , 2000, Ultrasound in medicine & biology.

[41]  F. Peyrin,et al.  Frequency dependence of ultrasonic backscattering in cancellous bone: autocorrelation model and experimental results. , 2000, The Journal of the Acoustical Society of America.

[42]  G. Berger,et al.  Broadband ultrasonic attenuation imaging: A new imaging technique of the os calcis , 1994, Calcified Tissue International.

[43]  K. Wear.  Fundamental precision limitations for measurements of frequency dependence of backscatter: applications in tissue-mimicking phantoms and trabecular bone. , 2001, The Journal of the Acoustical Society of America.

[44]  J. Houde,et al.  Correlations Among Bone Mineral Density, Broadband Ultrasound Attenuation, Mechanical Indentation Testing, and Bone Orientation in Bovine Femoral Neck Samples , 1997, Calcified Tissue International.

[45]  M. Bouxsein,et al.  Quantitative Ultrasound of the Calcaneus Reflects the Mechanical Properties of Calcaneal Trabecular Bone , 1997, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[46]  G Berger,et al.  In vitro assessment of the relationship between acoustic properties and bone mass density of the calcaneus by comparison of ultrasound parametric imaging and quantitative computed tomography. , 1997, Bone.