TiAlN/TiAlZrN multilayered hard coatings for enhanced performance of HSS drilling tools

Abstract Alternate TiAlN/TiAlZrN multilayered hard coatings with bilayer periods ranging from 6.7 to 600 nm were prepared by cathodic arc method on steel substrates and 8 mm HSS drills. The elemental composition of the composing layers was determined. A thoroughly investigation of the characteristics of multilayers and of the TiN, TiAlN and TiAlZrN single layer coatings was done, concerning the phase composition, texture, microhardness, adhesion and dry drilling performance. The highest microhardness values, of about 49 GPa, were measured for the multilayers with Λ ≈ 13 nm, while the coatings with large Λ values (~ 600 nm) were found to have the best adhesion (critical load Lc = 63 N). The dry drilling tests revealed that the nanometer scale multilayered TiAlN/TiAlZrN coatings exhibited superior drilling performance as compared with commonly used single layer coatings (TiN, TiAlN).

[1]  H. Tung,et al.  Hardness and residual stress in nanocrystalline ZrN films: Effect of bias voltage and heat treatment , 2009 .

[2]  Jung Ho Je,et al.  Effects of strain energy on the preferred orientation of TiN thin films , 1993 .

[3]  Flávio José da Silva,et al.  Tribological characterisation of PVD coatings for cutting tools , 2004 .

[4]  L. Zhao,et al.  Preferred orientation and hardness enhancement of TiN/CrN superlattice coatings deposited by reactive magnetron sputtering , 2002 .

[5]  C. Mitterer,et al.  Multifunctional multi-component PVD coatings for cutting tools , 2005 .

[6]  M. Dinescu,et al.  TiN/ZrN heterostructures deposition and characterisation , 2006 .

[7]  B. Derby,et al.  Multilayer nitride coatings by closed field unbalanced magnetron sputter ion plating , 2003 .

[8]  J. Greene,et al.  Oxidation of metastable single‐phase polycrystalline Ti0.5Al0.5N films: Kinetics and mechanisms , 1990 .

[9]  C. Tromas,et al.  Stress, interfacial effects and mechanical properties of nanoscale multilayered coatings , 2007 .

[10]  W. Sproul,et al.  Structure and hardness studies of CNx/TiN nanocomposite coatings , 1996 .

[11]  E. D. Doyle,et al.  Dry cutting performance of partially filtered arc deposited titanium aluminium nitride coatings with various metal nitride base coatings , 2001 .

[12]  H. Holleck.  DESIGNING ADVANCED COATINGS FOR WEAR PROTECTION , 1991 .

[13]  J. Wallbank,et al.  Performance of low-friction coatings in the dry drilling of automotive Al–Si alloys , 2005 .

[14]  S. Deevi,et al.  Single layer and multilayer wear resistant coatings of (Ti,Al)N: a review , 2003 .

[15]  Y. Tse,et al.  Interdependence between stress, preferred orientation, and surface morphology of nanocrystalline TiN thin films deposited by dual ion beam sputtering , 2006 .

[16]  S. Barnett,et al.  Growth of single-crystal TiN/VN strained-layer superlattices with extremely high mechanical hardness , 1987 .

[17]  L. Rapoport,et al.  Bias voltage and incidence angle effects on the structure and properties of vacuum arc deposited TiN coatings , 2000 .

[18]  D. Dove,et al.  Ti/Ti‐N Hf/Hf‐N and W/W‐N multilayer films with high mechanical hardness , 1992 .

[19]  J. Musil.  Hard and superhard nanocomposite coatings , 2000 .

[20]  M. Braic,et al.  Properties of arc plasma deposited TiCN/ZrCN superlattice coatings , 2005 .

[21]  J. Brooks,et al.  Deposition and characterization of TiAlZrN films produced by a combined steered arc and unbalanced magnetron sputtering technique , 1995 .

[22]  L. Hultman,et al.  Growth, structure, and microhardness of epitaxial TiN/NbN superlattices , 1992 .

[23]  D. Kothari,et al.  Recent trends in surface engineering using cathodic arc technique , 2002 .

[24]  H. Barshilia,et al.  A comparative study on the structure and properties of nanolayered TiN/NbN and TiAlN/TiN multilayer coatings prepared by reactive direct current magnetron sputtering , 2006 .

[25]  P. Martin,et al.  The deposition of NbN and NbC thin films by filtered vacuum cathodic arc deposition , 2003 .

[26]  Nathan I. Croitoru,et al.  Reactive-sputter-deposited TiN films on glass substrates , 1991 .

[27]  P. Yashar,et al.  Nanometer scale multilayered hard coatings , 1999 .

[28]  I. Petrov,et al.  IMPROVED Ti1–xAlxN PVD COATINGS FOR DRY HIGH SPEED CUTTING OPERATIONS , 1998 .