论文信息 - The TOTEM T1 read out card motherboard

The TOTEM T1 read out card motherboard

This article describes the Read Out Card (ROC) motherboard, which is the main component of the T1 forward telescope front-end electronic system. The ROC main objectives are to acquire tracking data and trigger information from the detector. It performs data conversion from electrical to optical format and transfers the data streams to the next level of the system and it implements Slow Control modules which are able to receive, decode and distribute the LHC machine low jitter clock and fast command. The ROC also provides a spy mezzanine connection based on programmable FPGA and USB2.0 for laboratory and portable DAQ debugging system.

M. Lo Vetere | E. Robutti | S. Minutoli

[2] Federico Faccio,et al. Radiation tolerant VLSI circuits in standard deep submicron CMOS technologies for the LHC experiments: practical design aspects , 1999 .

[3] Federico Faccio,et al. A radiation tolerant gigabit serializer for LHC data transmission , 2001 .

[4] C Paillard,et al. The CCU25 : a network oriented communication and control unit integrated circuit in a 0.25 $\mu$m CMOS technology , 2002 .

[5] S. Lami,et al. The TOTEM experiment at LHC , 2008, 2011 IEEE Nuclear Science Symposium Conference Record.

[6] P. Aspell,et al. VFAT2 : A front-end “system on chip” providing fast trigger information and digitized data storage for the charge sensitive readout of multi-channel silicon and gas particle detectors. , 2008, 2008 IEEE Nuclear Science Symposium Conference Record.

[7] P. Catastini,et al. The TOTEM Experiment at the CERN Large Hadron Collider , 2008 .