A new Measuring Method of Flux Linkage of SRM

This paper presents a indirect method of measuring flux characteristics based on DSP. By measuring current and voltage on a phase winding circuit and transfer them to PC by communication program, combined with the Simpson's rule, the magnetization characteristics are obtained. The experimental instruments needed in this method are common, and the test platform is easy to be built, thus the expense is lowered in measurement of flux. The test indicates the measuring process is simple to implement, and the experimental results are accurate.

[1]  R. Krishnan,et al.  Switched reluctance motor drives : modeling, simulation, analysis, design, and applications , 2001 .

[2]  Bhim Singh,et al.  Measurement of Flux Linkage and Inductance Profile of SRM , 2010 .

[3]  Ouassima Akhrif,et al.  Adaptive feedback linearization for position control of a switched reluctance motor: analysis and simulation , 1992, Proceedings of the 1992 International Conference on Industrial Electronics, Control, Instrumentation, and Automation.

[4]  H. Zelaya De La Parra,et al.  Application of a full-order extended Luenberger observer for a position sensorless operation of a switched reluctance motor drive , 1996 .

[5]  O. Ichinokura,et al.  A Method for Calculating Iron Loss of an SR Motor Based on Reluctance Network Analysis and Comparison of Symmetric and Asymmetric Excitation , 2006, INTERMAG 2006 - IEEE International Magnetics Conference.

[6]  Barry W. Williams,et al.  Sensorless position detection using neural networks for the control of switched reluctance motors , 1999, Proceedings of the 1999 IEEE International Conference on Control Applications (Cat. No.99CH36328).

[7]  Changliang Xia,et al.  Flux linkage characteristic measurement and parameter identification based on hybrid genetic algorithm for switched reluctance motors , 2008, 2008 3rd IEEE Conference on Industrial Electronics and Applications.

[8]  Ki-Sik Lee,et al.  Dynamic vibration analysis of switched reluctance motor using magnetic charge force density and mechanical analysis , 2002 .

[9]  Ray-Lee Lin,et al.  Simplified flux-linkage model for switched-reluctance motors , 2005 .

[10]  T. Lachman,et al.  Nonlinear modelling of switched reluctance motors using artificial intelligence techniques , 2004 .

[11]  Seref Sagiroglu,et al.  Nonlinear modelling of a switched reluctance drive based on neural networks , 1994, Proceedings of MELECON '94. Mediterranean Electrotechnical Conference.

[12]  Silverio Bolognani,et al.  Switched-Reluctance Motor Performance Analysis Based On An Improved Modeling Of Its Magnetic Characteristics , 1991 .

[13]  R. Krishnan,et al.  Switched Reluctance Motor Drives , 2019 .

[14]  Christopher R. Houck,et al.  On the use of non-stationary penalty functions to solve nonlinear constrained optimization problems with GA's , 1994, Proceedings of the First IEEE Conference on Evolutionary Computation. IEEE World Congress on Computational Intelligence.

[15]  W. F. Ray,et al.  A new method of flux or inductance measurement for switched reluctance motors , 1994 .

[16]  V. Ramanarayanan,et al.  Flux-linkage characteristics of switched reluctance motor , 1996, Proceedings of International Conference on Power Electronics, Drives and Energy Systems for Industrial Growth.

[17]  Tian-Hua Liu,et al.  Implementation of a sensorless switched reluctance drive with self-inductance estimating technique , 2002, IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02.

[18]  K.R. Rajagopal,et al.  Calculation of the flux-linkage characteristics of a switched reluctance motor by flux tube method , 2005, IEEE Transactions on Magnetics.

[19]  A. Radun.  Analytically computing the flux linked by a switched reluctance motor phase when the stator and rotor poles overlap , 2000 .

[20]  Sanjib Kumar Panda,et al.  Experimental investigation of variable structural PID control for switched reluctance motor drives , 1997, Proceedings of Second International Conference on Power Electronics and Drive Systems.

[21]  Alessandro Ferrero,et al.  A digital method for the determination of the magnetic characteristic of variable reluctance motors , 1990 .

[22]  Babak Fahimi,et al.  Correction to "An autocalibrating inductance model for switchedreluctance motor drives" , 2007, IEEE Trans. Ind. Electron..