Comparison of surface and cross-sectional micro-nano mechanical properties of flame sprayed NiCrBSi coating

[1]  Didier Chicot,et al.  Work-of-indentation coupled to contact stiffness for calculating elastic modulus by instrumented indentation , 2016 .

[2]  G. Bolelli,et al.  Wear and impact behaviour of High Velocity Air-Fuel sprayed Fe-Cr-Ni-B-C alloy coatings , 2016 .

[3]  D. Thirumalaikumarasamy,et al.  Effect of experimental parameters on the micro hardness of plasma sprayed alumina coatings on AZ31B magnesium alloy , 2015 .

[4]  A. Macwan,et al.  Microstructure, hardness, and fracture toughness of suspension plasma sprayed yttria-stabilized zirconia electrolytes on stainless steel substrates , 2015 .

[5]  C. Palacio,et al.  Hardness of thermal sprayed coatings: Relevance of the scale of measurement , 2015 .

[6]  Chang-jiu Li,et al.  Propagation feature of cracks in plasma-sprayed YSZ coatings under gradient thermal cycling , 2015 .

[7]  S. Spence,et al.  An improved Vickers indentation fracture toughness model to assess the quality of thermally sprayed coatings , 2014 .

[8]  C. Dai,et al.  Elasto-plastic characteristics and mechanical properties of as-sprayed 8 mol% yttria-stabilized zirconia coating under nano-scales measured by nanoindentation , 2014 .

[9]  K. Holmberg,et al.  Damage mechanisms and cracking behavior of thermal sprayed WC–CoCr coating under scratch testing , 2014 .

[10]  Á. Rico,et al.  On the relevance of microstructure in the fracture toughness of nanostructured alumina–13% titania coatings , 2014 .

[11]  K. Kurzydłowski,et al.  Failure and deformation mechanisms during indentation in nanostructured Cr/CrN multilayer coatings , 2014 .

[12]  J. Nohava,et al.  A contribution to understanding the results of instrumented indentation on thermal spray coatings — Case study on Al2O3 and stainless steel , 2014 .

[13]  Motofumi Ohki,et al.  Proposal for ISO 14577 : Metallic materials : Instrumented Indentation Test for Hardness and Materials Parameters (Part 1) Test Method (3rd. Influence on Computed Young's Modulus by Different Indenter's Tip Profile and Material Property (小特集 微小部および微小部材の評価技術) , 2012 .

[14]  Ya-Zhe Xing,et al.  The fracture toughness of alumina coatings plasma-sprayed at different in situ temperatures , 2012 .

[15]  J. Ding,et al.  Evaluation of microhardness, fracture toughness and residual stress in a thermal barrier coating system: A modified Vickers indentation technique , 2012 .

[16]  Liang Wang,et al.  Microstructure and indentation mechanical properties of plasma sprayed nano-bimodal and conventional ZrO2–8wt%Y2O3 thermal barrier coatings , 2012 .

[17]  E. Sánchez,et al.  Nanoindentation study of the mechanical and damage behaviour of suspension plasma sprayed TiO2 coatings , 2012 .

[18]  E. Sánchez,et al.  Hardness and Young's modulus distributions in atmospheric plasma sprayed WC-Co coatings using nanoindentation , 2011 .

[19]  N. Serres,et al.  An investigation of the mechanical properties and wear resistance of NiCrBSi coatings carried out by in situ laser remelting , 2011 .

[20]  C. Berndt,et al.  Selection of the implant and coating materials for optimized performance by means of nanoindentation. , 2011, Acta biomaterialia.

[21]  J. Nohava,et al.  Interesting aspects of indentation and scratch methods for characterization of thermally-sprayed coatings , 2010 .

[22]  A. Vaccari,et al.  Nanoindentation: Unload-to-load work ratio analysis in amorphous carbon films for mechanical properties , 2010 .

[23]  S. Yue,et al.  Microstructure and nanohardness of cold-sprayed coatings: Electron backscattered diffraction and nanoindentation studies , 2010 .

[24]  Fei Zeng,et al.  The influence of grain morphology on indentation deformation characteristic of metallic nano-multilayers , 2009 .

[25]  S. Saber-Samandari,et al.  Nanoindentation on the surface of thermally sprayed coatings , 2009 .

[26]  Zehua Wang,et al.  Microstructure and microhardness characterization of a Fe-based coating deposited by high-velocity oxy-fuel thermal spraying , 2009 .

[27]  A. Mukhopadhyay,et al.  Nanoindentation response of novel hydroxyapatite–mullite composites , 2009 .

[28]  F. Xuan,et al.  Microstructural and porosity variations in the plasma-sprayed Ni-alloy coatings prepared at different spraying powers , 2009 .

[29]  S. Veldhuis,et al.  Coating optimisation for high speed machining with advanced nanomechanical test methods , 2009 .

[30]  S. Saber-Samandari,et al.  Nanoindentation reveals mechanical properties within thermally sprayed hydroxyapatite coatings , 2009 .

[31]  R. Jayaganthan,et al.  Microstructural characteristics and mechanical properties of HVOF sprayed NiCrAl coating on superalloys , 2009 .

[32]  Jesús Rodríguez,et al.  Influence of the deposition techniques on the mechanical properties and microstructure of NiCrBSi coatings , 2008 .

[33]  J. M. Guilemany,et al.  Study of the HVOF Ni-Based Coatings’ Corrosion Resistance Applied on Municipal Solid-Waste Incinerators , 2008 .

[34]  I. Peñuelas,et al.  Microstructural study of NiCrBSi coatings obtained by different processes , 2007 .

[35]  J. Hosson,et al.  Deformation and failure mechanism of nano-composite coatings under nano-indentation , 2006 .

[36]  P. McHugh,et al.  Determination of elastic and plastic material properties using indentation: Development of method and application to a thin surface coating , 2005 .

[37]  M. Laugier,et al.  Work of indentation methods for determining copper film hardness , 2005 .

[38]  S. Veldhuis,et al.  Elastic and plastic work of indentation as a characteristic of wear behavior for cutting tools with nitride PVD coatings , 2004 .

[39]  Nikhilesh Chawla,et al.  Deformation behavior of (Cu, Ag)–Sn intermetallics by nanoindentation , 2004 .

[40]  J. Guilemany,et al.  Tribological study of NiCrBSi coating obtained by different processes , 2003 .

[41]  C. B. Carter,et al.  Indentation deformation and fracture of thin polystyrene films , 2002 .

[42]  F. Otsubo,et al.  Structure and phases in nickel-base self-fluxing alloy coating containing high chromium and boron , 2000 .

[43]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[44]  J. Ndjaka,et al.  A criterion to identify sinking-in and piling-up in indentation of materials , 2015 .