Heat transfer—A review of 2005 literature

[1]  Zhibo Dong,et al.  Three Dimensional Numerical Simulation for the Driving Force of Weld Solidification Cracking , 2009 .

[2]  Jaap Lubbers,et al.  The effects of residual temperature rise on ultrasound heating. , 2005, Ultrasound in medicine & biology.

[3]  A.F. Abdel Gawad,et al.  Numerical and neural study of flow and heat transfer across an array of integrated circuit components , 2006, Thermal and Thermomechanical Proceedings 10th Intersociety Conference on Phenomena in Electronics Systems, 2006. ITHERM 2006..

[4]  C. Schaeffer,et al.  Heat Pipe Integrated in Direct Bonded Copper (DBC) Technology for Cooling of Power Electronics Packaging , 2006, IEEE Transactions on Power Electronics.

[5]  Hans Müller-Steinhagen,et al.  Fouling During the Use of “Fresh” Water as Coolant—The Development of a “User Guide” , 2009 .

[6]  Lirio Schaeffer,et al.  Exact and approximate methods for determining the thermal parameters of the forging process , 2005 .

[7]  Hiroshi Nakayama,et al.  Turbulent Mixing of Hot and Cold Airflows in Automobile HVAC Unit (Characteristics of Velocity and Temperature Fields in Mixing T-junction) , 2005 .

[8]  Gang Chen,et al.  1ω,2ω, and 3ω methods for measurements of thermal properties , 2005 .

[9]  Tobias Lindström,et al.  Magnesium diboride nanobridges fabricated by electron-beam lithography , 2005 .

[10]  S.W. Smith,et al.  Finite-element analysis of temperature rise and lesion formation from catheter ultrasound ablation transducers , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[11]  Nando Troyani,et al.  Numerical modelling of thermal evolution in hot metal coiling , 2005 .

[12]  Lars Arnberg,et al.  The heat transfer during filling of a high-pressure die-casting shot sleeve , 2005 .

[13]  J. Laine,et al.  3D steady state and transient simulation tools for heat transfer and solidification in continuous casting , 2005 .

[14]  Alan W. Cramb,et al.  The Observation of Mold Flux Crystallization on Radiative Heat Transfer , 2005 .

[15]  Georg Frommeyer,et al.  Macroscopic modeling of solidification processes by performing the generalized enthalpy method , 2005 .

[16]  Viriato Semiao,et al.  Entropy generation through radiative transfer in participating media: analysis and numerical computation , 2005 .

[17]  Shikui Dong,et al.  Effects of graded refractive index on steady and transient heat transfer inside a scattering semitransparent slab , 2005 .

[18]  Li-Ming Ruan,et al.  Finite element method for radiative heat transfer in absorbing and anisotropic scattering media , 2005 .

[19]  M. S. Sifaoui,et al.  Numerical heat transfer study in a scattering, absorbing and emitting semi-transparent porous medium in a cylindrical enclosure , 2005 .

[20]  J. D. Hunt,et al.  A numerical model for a heat flux DSC: Determining heat transfer coefficients within a DSC , 2005 .

[21]  Z. Guo,et al.  Modelling of materials properties and behaviour critical to casting simulation , 2005 .

[22]  Xiaonan Luo,et al.  Numerical solution of a two-dimensional simulation on heat and mass transfer through cloth , 2005, Appl. Math. Comput..

[23]  Heung Nam Han,et al.  Hot powder pressing—An analysis of the thermo-mechanical behavior of the roller , 2005 .

[24]  M. P. Phaniraj,et al.  Thermo-mechanical modeling of two phase rolling and microstructure evolution in the hot strip mill - Part I. Prediction of rolling loads and finish rolling temperature , 2005 .

[25]  H. Ajam,et al.  Exergetic Optimization of Solar Air Heaters and Comparison with Energy Analysis , 2005 .

[26]  Daniel Henry,et al.  Three-dimensional numerical study of natural convection in vertical cylinders partially heated from the side , 2005 .

[27]  Sheng-Chung Tzeng,et al.  Flow Structure in an Inner Rotating Annular Channel with Ribbed Wall Cylinder , 2005 .

[28]  R. Flükiger,et al.  Properties of the plasma channel in liquid discharges inferred from cathode local temperature measurements , 2005 .

[29]  G. P. Johari,et al.  Heat capacity of water in nanopores. , 2005, The Journal of chemical physics.

[30]  Yong-gang Lv,et al.  3-D numerical study on the induced heating effects of embedded micro/nanoparticles on human body subject to external medical electromagnetic field. , 2005, IEEE transactions on nanobioscience.

[31]  Y. Joshi,et al.  An integrated methodology for multiobjective optimal component placement and heat sink sizing , 2005, IEEE Transactions on Components and Packaging Technologies.

[32]  P. Rodgers,et al.  Prediction of electronic component-board transient conjugate heat transfer , 2005, IEEE Transactions on Components and Packaging Technologies.

[33]  Ye-Ling Cao,et al.  Optimal Performance of Thermoelectric Refrigeration System Using Entropy Generation Minimization Method , 2005 .

[34]  L. Chibante,et al.  Improving the heat transfer of nanofluids and nanolubricants with carbon nanotubes , 2005 .

[35]  Anica Trp,et al.  An experimental and numerical investigation of heat transfer during technical grade paraffin melting and solidification in a shell-and-tube latent thermal energy storage unit , 2005 .

[36]  N. Eldabe,et al.  Non-Darcy Couette flow through a porous medium of magnetohydro-dynamic visco-elastic fluid with heat and mass transfer , 2005 .

[37]  Y. Jaluria,et al.  Numerical Simulation of Boundary Conditions and the Onset of Instability in Natural Convection due to Protruding Thermal Sources in an Open Rectangular Channel , 2005 .

[38]  Sukanta K. Dash,et al.  Energy and Exergy Balance in the Process of Pulverized Coal Combustion in a Tubular Combustor , 2005 .

[39]  M. Kind,et al.  Flow pattern and heat transfer characteristics during flow boiling of CO2 in a horizontal micro fin tube and comparison with smooth tube data , 2005 .

[40]  Fangjun Hong,et al.  Modeling of Substrate Remelting, Flow, and Resolidification in Microcasting , 2005 .

[41]  Guillaume Delaplace,et al.  Dimensional analysis for planetary mixer: Modified power and Reynolds numbers , 2005 .

[42]  Felix Ziegler,et al.  Increase of the efficiency of the heat transfer phase in solid sorption or reaction systems , 2005 .

[43]  Cheng-Hung Huang,et al.  A Three-Dimensional Inverse Problem in Predicting the Heat Fluxes Distribution in the Cutting Tools , 2005 .

[44]  O. N. Shablovsky.  A thermal model of periodic crystallization , 2005 .

[45]  K. Hanjalić.  Synergy of experiments and computer simulations in research of turbulent convection , 2005 .

[46]  Xin-xin Zhang,et al.  Influence of participating media on the radiation thermometry for surface temperature measurement , 2005 .

[47]  Gilles Roy,et al.  Heat transfer and fluid flow of nanofluids in laminar radial flow cooling systems , 2005 .

[48]  Chuanshan Dai,et al.  Neutral Instability and Optimum Convective Mode in a Fluid Layer with PCM Particles , 2005 .

[49]  Mohammad Rahnama,et al.  Numerical Investigation of Convective Heat Transfer in Unsteady Laminar Flow Over a Square Cylinder in a Channel , 2005 .

[50]  Orhan Aydin,et al.  Natural convection from a discrete heater in enclosures filled with a micropolar fluid , 2005 .

[51]  Akira Nakayama,et al.  A two‐dimensional numerical procedure for a three dimensional internal flow through a complex passage with a small depth (its application to numerical analysis of fluidic oscillators) , 2005 .

[52]  Xundan Shi,et al.  Periodic state of fluid flow and heat transfer in a lid-driven cavity due to an oscillating thin fin , 2005 .

[53]  Paul C. Fife,et al.  Scaling heat transfer in fully developed turbulent channel flow , 2005 .

[54]  M. Velez-Reyes,et al.  One-dimensional heat transfer analysis in open-cell 10-ppi metal foam , 2005 .

[55]  G. Longo,et al.  Experimental and theoretical analysis of heat and mass transfer in a packed column dehumidifier/regenerator with liquid desiccant , 2005 .

[56]  Tsing-Fa Lin,et al.  Condensation heat transfer and pressure drop of refrigerant R-410A flow in a vertical plate heat exchanger , 2005 .

[57]  Eric Arquis,et al.  Metal matrix composite processing: numerical study of heat transfer between fibers and metal , 2005 .

[58]  C. H. Marchi,et al.  Multi-dimensional discretization error estimation for convergent apparent order , 2005 .

[59]  Anthony M. Jacobi,et al.  Air-side data interpretation and performance analysis for heat exchangers with simultaneous heat and mass transfer: Wet and frosted surfaces , 2005 .

[60]  Lili Zheng,et al.  Melting and oxidation behavior of in-flight particles in plasma spray process , 2005 .

[61]  John R. Thome,et al.  State-of-the-art of two-phase flow and flow boiling heat transfer and pressure drop of CO2 in macro- and micro-channels. , 2005 .

[62]  Wen-Shan Lin.  Steady ablation on the surface of a two-layer composite , 2005 .

[63]  Mingtian Xu,et al.  Dual-phase-lagging heat conduction based on Boltzmann transport equation , 2005 .

[64]  Shuichi Torii,et al.  Numerical analysis of thermal-fluid flow between stationary and rotating parallel disks , 2005 .

[65]  Rashid A. Ahmad,et al.  Convective Heat Transfer in the Reusable Solid Rocket Motor of the Space Transportation System , 2005 .

[66]  Ramesh K. Shah,et al.  Exchanger Performance Behavior Through Irreversibility Analysis for 1-2 TEMA G Heat Exchangers , 2005 .

[67]  Peter W. Egolf,et al.  Heat exchange by mass transfer in isothermal environment: A two-parameters non-linear model , 2005 .

[68]  Bijan Farhanieh,et al.  Structured Multiblock Grid Solution of Two-Dimensional Transient Inverse Heat Conduction Problems in Cartesian Coordinate System , 2005 .

[69]  Predrag Stojan Hrnjak,et al.  Flow Boiling Heat Transfer of CO2 at Low Temperatures in a Horizontal Smooth Tube , 2005 .

[70]  Didier Delaunay,et al.  Study and modeling of heat transfer during the solidification of semi-crystalline polymers , 2005 .

[71]  Yan-Ting Lin,et al.  Turbulent Film Condensation on a Nonisothermal Horizontal Tube , 2005 .

[72]  William H. Sutton,et al.  Enhancement of heat transfer: Combined convection and radiation in the entrance region of circular ducts with porous inserts , 2005 .

[73]  Kamel Hooman.  Fully Developed Temperature Distribution in a Porous Saturated Duct of Elliptical Cross Section with Viscous Dissipation Effects and Entropy Generation Analysis , 2005 .

[74]  Dieter Gorenflo,et al.  Review on pool boiling heat transfer of carbon dioxide , 2005 .

[75]  B. Yilbas,et al.  Influence of Conical and Annular Nozzle Geometric Configurations on Flow and Heat Transfer Characteristics due to Flow Impingement onto a Flat Plate , 2005 .

[76]  Peter Woodfield,et al.  Delay of wetting propagation during jet impingement quenching for a high temperature surface , 2005 .

[77]  K. Maleque,et al.  Steady Laminar Convective Flow with Variable Properties Due to a Porous Rotating Disk , 2005 .

[78]  Jean Castaing-Lasvignottes,et al.  Second law analysis of periodic heat conduction through a wall , 2005 .

[79]  Won-Pil Baek,et al.  Visualization of a principle mechanism of critical heat flux in pool boiling , 2005 .

[80]  Axel Klar,et al.  Numerical Solvers for Radiation and Conduction in High Temperature Gas Flows , 2005 .

[81]  Calin Zamfirescu,et al.  Optimal Ground Tube Length for Cooling of Electronics Shelters , 2005 .

[82]  Sofiane Guessasma,et al.  Neural Computation to Estimate Heat Flux in an Atmospheric Plasma Spray Process , 2005 .

[83]  Robert A. McLeod,et al.  Design of a confocal holography microscope for three-dimensional temperature measurements of fluids in microgravity , 2005 .

[84]  Kamil Kahveci,et al.  Heat Transfer in Continuous-Drive Friction Welding of Different Diameters , 2005 .

[85]  Go-Long Tsai,et al.  Thermal performance measurement of heat sinks with confined impinging jet by infrared thermography , 2005 .

[86]  F. J. Diez,et al.  PLIF and PIV measurements of the self-preserving structure of steady round buoyant turbulent plumes in crossflow , 2005 .

[87]  Bakhtier Farouk,et al.  Heat Transfer Enhancement by Acoustic Streaming in an Enclosure , 2005 .

[88]  Mazen M. Abu-Khader,et al.  Compensating for End Effects in Plate-and-Frame Heat Exchangers , 2005 .

[89]  Bo Yu,et al.  The accuracy and parametric sensitivity of algebraic models for turbulent flow and convection , 2005 .

[90]  Feng Xu,et al.  Mixed convective heat transfer of water in a pipe under supercritical pressure , 2005 .

[91]  Ya-Ling He,et al.  A simple method for improving the SIMPLER algorithm for numerical simulations of incompressible fluid flow and heat transfer problems , 2005 .

[92]  Kenichi Hashizume,et al.  Effect of fins on forced convection heat transfer around a tube in an aligned-arranged tube bundle , 2005 .

[93]  Kwang-Yong Kim,et al.  Shape Optimization of a Dimpled Channel to Enhance Turbulent Heat Transfer , 2005 .

[94]  Masato Tagawa,et al.  Thermal-field Structure of a Non-Premixed Turbulent Flame Formed in a Strong Pressure-Gradient Flow , 2005 .

[95]  A. Robinson,et al.  A two-phase flow pattern map for annular channels under a DC applied voltage and the application to electrohydrodynamic convective boiling analysis , 2005 .

[96]  Shyy Woei Chang,et al.  Free Convective Heat Transfer in Tilted Longitudinal Open Cavity , 2005 .

[97]  Chi-Chang Wang,et al.  Forced Convection in Micropolar Fluid Flow through a Wavy-Wall Channel , 2005 .

[98]  Yulong Ding,et al.  Formulation of nanofluids for natural convective heat transfer applications , 2005 .

[99]  Jin Hyun Nam,et al.  An Efficient Calculation of Multidimensional Freeze-Drying Problems Using Fixed Grid Method , 2005 .

[100]  C. C. Pain,et al.  A model of heat transfer dynamics of coupled multiphase‐flow and neutron‐radiation , 2005 .

[101]  Octavio Armas,et al.  Effect of the trapped mass and its composition on the heat transfer in the compression cycle of a reciprocating engine , 2005 .

[102]  Tzu-Chen Hung,et al.  A Numerical Study of the Enhancement of Chip Cooling via a Flow-Disturbing Obstruction Block , 2005 .

[103]  Pradeep Bansal,et al.  Reverse heat transfer and re-condensation phenomena in non-adiabatic capillary tubes , 2005 .

[104]  Jun‐Jie Zhou,et al.  Three dimensional numerical simulation and analysis of the airside performance of slotted fin surfaces with radial strips , 2005 .

[105]  Eton Y. Ng,et al.  An analytical study on heat transfer performance of radiators with non-uniform airflow distribution , 2005 .

[106]  Fatola Farhadi,et al.  New correlation for natural convection of finned tube A-type air cooler , 2005 .

[107]  N. D. Kaushika,et al.  Thermal analysis of solar biomass hybrid co-generation plants , 2005 .

[108]  Ching-Yen Ho,et al.  Evaporation heat transfer and pressure drop characteristics of R-290 (propane), R-600 (butane), and a mixture of R-290/R-600 in the three-lines serpentine small-tube bank , 2005 .

[109]  Hua Ben,et al.  Exergy analysis of domestic-scale solar water heaters , 2005 .

[110]  Jincan Chen,et al.  Optimum thermoeconomic and thermodynamic performance characteristics of an irreversible three-heat-source heat pump , 2005 .

[111]  Christopher Yap,et al.  Effects of geometric parameters on confined impinging jet heat transfer , 2005 .

[112]  Valerio Lo Brano,et al.  Single thermal zone balance solved by Transfer Function Method , 2005 .

[113]  Y. H. Hung,et al.  Thermal Performance Investigation for Confined Heat Sinks By Using a Modified Transient Liquid Crystal Technique , 2005 .

[114]  Ken R. Morison,et al.  SPINNING DISC MEASUREMENT OF TWO-STAGE CLEANING OF HEAT TRANSFER FOULING DEPOSITS OF MILK , 2005 .

[115]  Kamil Kaygusuz,et al.  Thermal Energy Storage System Using a Technical Grade Paraffin Wax as Latent Heat Energy Storage Material , 2005 .

[116]  Evangelos Tsotsas,et al.  Interfacial convection during evaporation of binary mixtures from porous obstacles , 2005 .

[117]  Guohua Chen,et al.  Heat and mass transfer model of dielectric-material-assisted microwave freeze-drying of skim milk with hygroscopic effect , 2005 .

[118]  Cha'o-Kuang Chen,et al.  Application of exergy method to an irreversible inter-cooled refrigeration cycle , 2005 .

[119]  Rong Chen,et al.  Mathematical modeling of a passive-feed DMFC with heat transfer effect , 2005 .

[120]  V. I. Sumin,et al.  Effect of the growth rate on thermal conditions during the growth of single crystals with melt feeding , 2005 .

[121]  Katsuji Noda,et al.  Drying Characteristics of Porous Materials in a Fluidized Bed of Hygroscopic Porous Particles , 2005 .

[122]  J. Hausselt,et al.  Development of a Ceramic Micro Heat Exchanger – Design, Construction, and Testing , 2005 .

[123]  Qiang Yao,et al.  A Mathematical Model of Heat Transfer in a Rotary Kiln Thermo‐Reactor , 2005 .

[124]  Samuel M. Sami,et al.  Influence of magnetic field on two-phase flow convective boiling of some refrigerant mixtures , 2005 .

[125]  Jun Fukai,et al.  Latent heat thermal energy storage tanks for space heating of buildings: Comparison between calculations and experiments , 2005 .

[126]  Ehud Greenspan,et al.  Computational Analysis of the Thermal-Hydraulic Characteristics of the Encapsulated Nuclear Heat Source , 2005 .

[127]  Milind V. Rane,et al.  Water-to-water heat transfer in tube¿tube heat exchanger: Experimental and analytical study , 2005 .

[128]  Arnold Reusken,et al.  Identification of boundary heat fluxes in a falling film experiment using high resolution temperature measurements , 2005 .

[129]  I. C. Howard,et al.  Measurement of deformation gradients in hot rolling of AA3004 , 2005 .

[130]  Y. Lie,et al.  Saturated flow boiling heat transfer and associated bubble characteristics of R-134a in a narrow annular duct , 2005 .

[131]  A. Sharma,et al.  Effect of channel-confinement and aiding/opposing buoyancy on the two-dimensional laminar flow and heat transfer across a square cylinder , 2005 .

[132]  Ho-Ming Yeh,et al.  Heat Transfer Enhancement in Cool-thermal Discharge Systems from Ice Melting with Producing Chilled Air under Time-velocity Variations and External Recycles , 2005 .

[133]  I. Silverman,et al.  High heat flux accelerator targets cooling with liquid-metal jet impingement , 2005 .

[134]  A. Mosyak,et al.  Heat transfer in micro-channels: Comparison of experiments with theory and numerical results , 2005 .

[135]  A. C. Mossi,et al.  Numerical simulation of heat transfer during the solidification of pure iron in sand and mullite molds , 2005 .

[136]  Daniel G. Knost,et al.  Heat transfer and film-cooling for the endwall of a first stage turbine vane , 2005 .

[137]  Michitsugu Mori,et al.  Bubble Lift-off Size in Forced Convective Subcooled Boiling Flow , 2005 .

[138]  Shalini,et al.  Double diffusive natural convection in a doubly stratified wavy porous enclosure , 2005, Appl. Math. Comput..

[139]  C. Zhang,et al.  A new numerical approach to solve an elliptic equation , 2005, Appl. Math. Comput..

[140]  S. Garimella,et al.  Prediction of the onset of nucleate boiling in microchannel flow , 2005 .

[141]  António Tadeu,et al.  Fundamental solutions for transient heat transfer by conduction and convection in an unbounded, half-space, slab and layered media in the frequency domain , 2005 .

[142]  Timothy A. Shedd,et al.  An automated non-contact wall temperature measurement using thermoreflectance , 2005 .

[143]  J. Gore,et al.  A Review of Heat Transfer Issues in Hydrogen Storage Technologies , 2005 .

[144]  M. D. Abreu,et al.  A mathematical method for solving mixed problems in multislab radiative transfer , 2005 .

[145]  Paulo R. M. Lyra,et al.  An axisymmetric finite volume formulation for the solution of heat conduction problems using unstructured meshes , 2005 .

[146]  Jun Zhang,et al.  A two level finite difference scheme for one dimensional Pennes' bioheat equation , 2005, Appl. Math. Comput..

[147]  Woodrow L. Shew,et al.  Liquid sodium model of geophysical core convection , 2005 .

[148]  Hans-Peter Bunge,et al.  Low plume excess temperature and high core heat flux inferred from non-adiabatic geotherms in internally heated mantle circulation models , 2005 .

[149]  Ranganathan Kumar,et al.  Role of ions in pool boiling heat transfer of pure and silica nanofluids , 2005 .

[150]  Wolfgang Müller-Hirsch,et al.  Near-field heat transfer in a scanning thermal microscope. , 2005, Physical review letters.

[151]  K. Li,et al.  Three‐dimensional numerical simulation of g‐jitter induced convection and solute transport in magnetic fields , 2005 .

[152]  I A Lubashevsky,et al.  Fast heat propagation in living tissue caused by branching artery network. , 2005, Physical review. E, Statistical, nonlinear, and soft matter physics.

[153]  Z. T. Yu,et al.  Investigation and analysis on a cellular heat pipe flat solar heater , 2005 .

[154]  Ismail Teke,et al.  Turbulent forced convection in a helically coiled square duct with one uniform temperature and three adiabatic walls , 2005 .

[155]  Ali J. Chamkha,et al.  Unsteady two-fluid flow and heat transfer in a horizontal channel , 2005 .

[156]  Ali J. Chamkha,et al.  Similarity solutions for MHD thermosolutal Marangoni convection over a flat surface in the presence of heat generation or absorption effects , 2005 .

[157]  Luigi Colombo,et al.  Effect of nitrogen on band alignment in HfSiON gate dielectrics , 2005 .

[158]  Subhash C. Mishra,et al.  Analysis of collimated radiation in participating media using the discrete transfer method , 2005 .

[159]  J. Lang.  Adaptive computation for boundary control of radiative heat transfer in glass , 2005 .

[160]  Mahmoud E. M. Ouaf,et al.  Exact solution of thermal radiation on MHD flow over a stretching porous sheet , 2005, Appl. Math. Comput..

[161]  Jing Li,et al.  Temperature distribution in workpiece during scratching and grinding , 2005 .

[162]  Nam-Trung Nguyen.  A novel thermal sensor concept for flow direction and flow velocity , 2005 .

[163]  Haruo Kawasaki,et al.  The dynamic characteristics of a thermal control system using latent heat: Comparison between analytical and experimental results , 2005 .

[164]  Min-Soo Kim,et al.  Evaporation Heat Transfer and Pressure Drop in Micro-Fin Tubes Before and After Tube-Expansion , 2005 .

[165]  José E. Spinelli,et al.  The effect of melt temperature profile on the transient metal/mold heat transfer coefficient during solidification , 2005 .

[166]  Nicholas Zabaras,et al.  A coupled thermomechanical, thermal transport and segregation analysis of the solidification of aluminum alloys on molds of uneven topographies , 2005 .

[167]  Goodarz Ahmadi,et al.  Inter-particle heat transfer in a riser of gas–solid turbulent flows , 2005 .

[168]  Lifeng Zhang,et al.  Fluid Flow, Heat Transfer and Inclusion Motion in a Four‐Strand Billet Continuous Casting Tundish , 2005 .

[169]  Yoshihiro Ootao,et al.  Three-dimensional solution for transient thermal stresses of functionally graded rectangular plate due to nonuniform heat supply , 2005 .

[170]  François Trochu,et al.  Development of a Characterization Mold to Measure the Transverse Thermal Conductivity of a Composite Material by Inverse Analysis , 2005 .

[171]  R. Kul’chyts’kyi-Zhyhailo,et al.  Contact stresses in rotating bodies with regard for heat generation and convective heat exchange , 2005 .

[172]  Luke Bisby,et al.  Thermal Behavior of Fire-Exposed Concrete Slabs Reinforced with Fiber-Reinforced Polymer Bars , 2005 .

[173]  Chris J. Kobus,et al.  An Investigation Into the Effect of Subcooled Liquid Inertia on Flow-Change-Induced Transient Flow Surges in Horizontal Condensing Flow Systems , 2005 .

[174]  Shizuo Saitoh,et al.  Effect of tube diameter on boiling heat transfer of R-134a in horizontal small-diameter tubes , 2005 .

[175]  Jing Liu,et al.  Study on the Heat and Fluid Transport inside the Biological Tissues Subject to Boiling Saline-Based Tumor Hyperthermic Injection , 2005 .

[176]  Hazem Ali Attia,et al.  Unsteady Couette Flow With Heat Transfer Considering Ion-Slip , 2005 .

[177]  Abdul Aziz,et al.  Some New Solutions for Extended Surface Heat Transfer Using Symbolic Algebra , 2005 .

[178]  Josua P. Meyer,et al.  Heat Transfer Characteristics of a Quadratic Koch Island Fractal Heat Exchanger , 2005 .

[179]  Koji Morita,et al.  Heat extraction characteristics by coaxial heat exchanger , 2005 .

[180]  Reima Iwatsu,et al.  Numerical study of swirling flows in a cylindrical container with co-/counter-rotating end disks under stable temperature difference , 2005 .

[181]  Robert W. Besant,et al.  Heat and mass transfer during silica gel–moisture interactions , 2005 .

[182]  G. N. Abaev,et al.  Mass transfer in a jet device , 2005 .

[183]  I. N. Sannikov,et al.  The Dynamics and Heat and Mass Transfer of a Vapor Bubble Containing a Hot Particle , 2005 .

[184]  Chin-Hsiang Cheng,et al.  Numerical Predictions of Thermal Convection in a Rectangular Enclosure with Oscillating Wall , 2005 .

[185]  Ravi Prasher,et al.  Thermal boundary resistance of nanocomposites , 2005 .

[186]  A. Mhimid,et al.  Anisotropy Effects on Heat and Fluid Flow by Unsteady Natural Convection and Radiation in Saturated Porous Media , 2005 .

[187]  Kazuhiro Fukuyo,et al.  Stability and accuracy of power‐series method for one‐dimensional heat conduction with non‐uniform grid systems , 2005 .

[188]  Ali Koşar,et al.  Boiling heat transfer in rectangular microchannels with reentrant cavities , 2005 .

[189]  Sheng-Chung Tzeng,et al.  Numerical study of confined slot jet impinging on porous metallic foam heat sink , 2005 .

[190]  Alexander Thür,et al.  Performance improvement by discharge from different levels in solar storage tanks , 2005 .

[191]  G. P. Peterson,et al.  Boiling nucleation and two-phase flow patterns in forced liquid flow in microchannels , 2005 .

[192]  Bor-Lih Kuo,et al.  Heat transfer analysis for the Falkner–Skan wedge flow by the differential transformation method , 2005 .

[193]  Yoav Heichal,et al.  A fast-response thin film thermocouple to measure rapid surface temperature changes , 2005 .

[194]  N. P. Zhukov,et al.  Modeling of the process of heat transfer from a plane heat source of constant strength in thermophysical measurements , 2005 .

[195]  Axel Klar,et al.  Adaptive solutions of SPN-approximations to radiative heat transfer in glass☆ , 2005 .

[196]  Kazuhiro Fukuyo,et al.  Stability and Accuracy of Power-series Method Applied to Transpiration Cooling Problems , 2005 .

[197]  A. Ogulu.  The influence of radiation absorption on unsteady free convection and mass transfer flow of a polar fluid in the presence of a uniform magnetic field , 2005 .

[198]  X. Cui,et al.  A Mixed-Mesh and New Angular Space Discretization Scheme of Discontinuous Finite Element Method for Three-Dimensional Radiative Transfer in Participating Media , 2005 .

[199]  A. N. Ponomarev.  An Investigation of Diffusion in Droplets and of Evaporation of Volatile Components into Vacuum , 2005 .

[200]  Eugen Magyari,et al.  Dual mixed convection flows in a vertical channel , 2005 .

[201]  A. E. Yakubenko,et al.  Friction and Heat Transfer in the Boundary Layer on a Permeable Surface with Injection of Foreign Gas , 2005 .

[202]  S. Chandra,et al.  Predicting Thermal Contact Resistance Between Molten Metal Droplets and a Solid Surface , 2005 .

[203]  Jonathan Rose,et al.  Condensation on a Horizontal Wire-Wrapped Tube , 2005 .

[204]  Stephane Etienne,et al.  Application of a sensitivity equation method to turbulent flows with heat transfer , 2005 .

[205]  Mehmet Esen,et al.  Experimental investigation of a two-phase closed thermosyphon solar water heater , 2005 .

[206]  Experiments and modeling of the hydraulic resistance and heat transfer of in-line square pin fin heat sinks with top by-pass flow , 2005 .

[207]  Mohamed Naceur Borjini,et al.  Prediction of Unsteady Natural Convection within a Horizontal Narrow Annular Space Using the Control-Volume Method , 2005 .

[208]  J. G. Brisson,et al.  Proof-of-Principle Measurements of the Superfluid Joule-Thomson Refrigerator Concept , 2005 .

[209]  Gilbong Lee,et al.  The performance of a transcritical CO2 cycle with an internal heat exchanger for hot water heating , 2005 .

[210]  E. P. Valueva.  Hydrodynamics and Heat Transfer in Pulsating Turbulent Pipe Flow of a Liquid of Variable Properties , 2005 .

[211]  Ting Wang,et al.  Flow and heat transfer of confined impingement jets cooling using a 3-D transient liquid crystal scheme , 2005 .

[212]  Krzysztof Kupiec,et al.  Analysis of thermal effects in a spherical adsorbent pellet , 2005 .

[213]  E. D. Sloan,et al.  A New Technique for Hydrate Thermal Diffusivity Measurements , 2005 .

[214]  K. Maleque,et al.  The effects of variable properties and hall current on steady MHD laminar convective fluid flow due to a porous rotating disk , 2005 .

[215]  Xiaofeng Peng,et al.  Bubble separation and collision on thin wires during subcooled boiling , 2005 .

[216]  Ricardo Martinez-Botas,et al.  Film cooling characteristics of rows of round holes at various streamwise angles in a crossflow: Part II. Heat transfer coefficients , 2005 .

[217]  Brane Širok,et al.  A Numerical Analysis of the Local Anomalies in a Natural-Draft Cooling Tower , 2005 .

[218]  S. V. Pereverzev,et al.  Natural linearization for the identification of nonlinear heat transfer laws , 2005 .

[219]  José Alberto Reis Parise,et al.  The Role of Heat Transfer in Refrigeration , 2005 .

[220]  Hans Müller-Steinhagen,et al.  Validation of a computer model for solar assisted district heating systems with seasonal hot water heat store , 2005 .

[221]  Hyung Hee Cho,et al.  Frequency-dependent heat transfer enhancement from rectangular heated block array in a pulsating channel flow , 2005 .

[222]  A. A. Stachel,et al.  Convective heat transfer in air flow around a cylinder at low Reynolds numbers , 2005 .

[223]  Joseph Majdalani,et al.  Effective thermal conductivity of common geometric shapes , 2005 .

[224]  Arun S. Mujumdar,et al.  Heat transfer from a pulsed laminar impinging jet , 2005 .

[225]  Rabindra Nath Mondal,et al.  Numerical study of non-isothermal flow with convective heat transfer in a curved rectangular duct , 2005 .

[226]  G. T. Polley,et al.  Interpreting and Applying Experimental Data for Plate-Fin Surfaces: Problems with Power Law Correlation , 2005 .

[227]  C. Kurtcebe,et al.  Heat transfer of a viscoelastic fluid in a porous channel , 2005 .

[228]  Dimos Poulikakos,et al.  Multiphase Transport Phenomena in the Diffusion Zone of a PEM Fuel Cell , 2005 .

[229]  W. Zhang,et al.  Correlation for Flow Boiling Heat Transfer at Low Liquid Reynolds Number in Small Diameter Channels , 2005 .

[230]  Gianpietro Cossali,et al.  Periodic heat transfer by forced laminar boundary layer flow over a semi-infinite flat plate , 2005 .

[231]  S. Ben Nasrallah,et al.  Unstructured Control-Volume Finite-Element Method for Radiative Heat Transfer in a Complex 2-D Geometry , 2005 .

[232]  Satesh Narayana Namasivayam,et al.  Condensation of Ethylene Glycol on Integral-Fin Tubes: Effect of Fin Geometry and Vapor Velocity , 2005 .

[233]  O. Flores-Macías,et al.  Thermal Diffusivity and Microstructure in API5L-X52 Carbon Steel , 2005 .

[234]  Anup K. Swain,et al.  Prediction of Shell Side Heat Transfer Coefficient for Common Liquids use of Nomograph , 2005 .

[235]  Peter Richards,et al.  The reliable simple one-dimensional 64-CPWTR model applied to the two-dimensional heat transfer problem of an insulated rectangular duct in an air conditioning or refrigeration system , 2005 .

[236]  L Chen,et al.  Performance comparison of an irreversible closed variable-temperature heat reservoir brayton cycle under maximum power density and maximum power conditions , 2005 .

[237]  Chii-Dong Ho,et al.  Heat-transfer enhancement in double-pass flat-plate solar air heaters with recycle , 2005 .

[238]  S. G. Obukhov,et al.  Nonstationary crisis of nucleate boiling under the conditions of an electrically controlled heat load , 2005 .

[239]  J. Klausner,et al.  Heterogeneous Nucleation With Artificial Cavities , 2005 .

[240]  Stéphane Quellec,et al.  MRI quantification of ice gradients in dough during freezing or thawing processes , 2005 .

[241]  Syed M. Zubair,et al.  The impact of fouling on performance evaluation of evaporative coolers and condensers , 2005 .

[242]  Ingegerd Sjöholm,et al.  The mechanisms controlling heat and mass transfer on frying of beefburgers. Part 2: The influence of the pan temperature and patty diameter , 2005 .

[243]  R. Chouikh,et al.  Numerical study of the natural convection flow resulting from the combined buoyancy effects of thermal and mass diffusion in a cavity with differentially heated side walls , 2005 .

[244]  Aparajita Datta,et al.  A computer based solution to check the drop in milk outlet temperature due to fouling in a tubular heat exchanger , 2005 .

[245]  Masaru Ishida,et al.  Computational Study on Binary Distillation of Heat-Driven Distillation System , 2005 .

[246]  Orhan Aydin,et al.  Effects of viscous dissipation on the heat transfer in a forced pipe flow. Part 2: Thermally developing flow , 2005 .

[247]  R. Rathnasamy,et al.  Experimental investigation of forced convective heat transfer to air, liquids, and liquid mixtures in a long narrow channel , 2005 .

[248]  A. P. Sorokin,et al.  Analysis of a Benchmark Experiment on the Hydraulics and Heat Transfer in a Liquid-Metal-Cooled Assembly of Fuel-Element Simulators , 2005 .

[249]  N. I. Grigor'eva.  Methods for Determining the Marangoni Numbers in Studying the Absorption in the Operation of a Heat Pump , 2005 .

[250]  Enrico Tronconi,et al.  Heat Transfer Characterization of Metallic Foams , 2005 .

[251]  D. Buddhi,et al.  Numerical heat transfer studies of the fatty acids for different heat exchanger materials on the performance of a latent heat storage system , 2005 .

[252]  M. Moawed,et al.  Experimental investigation of natural convection from vertical and horizontal helicoidal pipes in HVAC applications , 2005 .

[253]  Won-Pil Baek,et al.  Critical Heat Flux Experiments on the Reactor Vessel Wall Using 2-D Slice Test Section , 2005 .

[254]  Fan-bill B. Cheung.  Limiting Factors for External Reactor Vessel Cooling , 2005 .

[255]  Sergey A. Sokratov,et al.  A microstructural approach to model heat transfer in snow , 2005 .

[256]  Anupam Dewan,et al.  Heat transfer enhancement by pin elements , 2005 .

[257]  Marcelo J.S. de Lemos,et al.  Heat transfer in enclosures having a fixed amount of solid material simulated with heterogeneous and homogeneous models , 2005 .

[258]  Memis Acar,et al.  A mathematical model for airflow and heat transfer through fibrous webs , 2005 .

[259]  Saleh M. Al-Harbi,et al.  Numerical study of natural convection heat transfer with variable viscosity and thermal radiation from a cone and wedge in porous media , 2005, Appl. Math. Comput..

[260]  Gaetano Salvatore Palazzo,et al.  The modelling of thin sheet forming by laser beams heat transfer models toward deformation analysis , 2005, Math. Comput. Model..

[261]  Anthony M. Jacobi,et al.  Air-side heat transfer enhancement of a refrigerator evaporator using vortex generation , 2005 .

[262]  Servando Álvarez Domínguez,et al.  Solar radiation calculation methodology for building exterior surfaces , 2005 .

[263]  Alice Ying,et al.  Numerical Modeling for Multiphase Incompressible Flow with Phase Change , 2005 .

[264]  A. Baïri,et al.  Heat transfer across a solid–solid interface obtained by machining in a lathe , 2005 .

[265]  M. Piller,et al.  Direct numerical simulation of turbulent forced convection in a pipe , 2005 .

[266]  Philippe Blanc-Benon,et al.  Computation of the temperature distortion in the stack of a standing-wave thermoacoustic refrigerator , 2005 .

[267]  Atipong Malatip,et al.  Streamline upwind finite element method for conjugate heat transfer problems , 2005 .

[268]  Dai,et al.  SIMULATION OF STEEL COIL HEAT TRANSFER IN HPH FURNACE , 2005 .

[269]  Roman Trobec,et al.  Biomedical Simulation of Heat Transfer in a Human Heart , 2005, J. Chem. Inf. Model..

[270]  Leonidas G. Bleris,et al.  Reduced order distributed boundary control of thermal transients in microsystems , 2005, IEEE Transactions on Control Systems Technology.

[271]  Alessandro Battaglia,et al.  Forward Monte Carlo computations of fully polarized microwave radiation in non-isotropic media , 2005 .

[272]  T.M.A. Maksoud,et al.  Heat transfer model for creep-feed grinding , 2005 .

[273]  Rajiv Chopra,et al.  Method for MRI-guided conformal thermal therapy of prostate with planar transurethral ultrasound heating applicators , 2005, Physics in medicine and biology.

[274]  J. Yoo,et al.  Direct numerical simulation of turbulent supercritical flows with heat transfer , 2005 .

[275]  Heinz Herwig,et al.  Asymptotic analysis of the near-wall region of turbulent natural convection flows , 2005, Journal of Fluid Mechanics.

[276]  Toshiaki Inoue,et al.  Bubble Behavior and Heat Transfer during Pool Boiling of Binary Mixtures , 2005 .

[277]  M. Ohadi,et al.  Effect of electrode geometry on performance of an EHD thin-film evaporator , 2005, Journal of Microelectromechanical Systems.

[278]  Lingxue Kong,et al.  Experimental investigation and numerical simulation of heat transfer in quenching fluidised beds , 2005 .

[279]  J. I. Frankel.  Motivation for the development of new thermal rate sensors for material science applications , 2005 .

[280]  Mohamed S. Hamed,et al.  Determination of heat transfer rates in an industry-like spray quench system using multiple impinging water jets , 2005 .

[281]  James E. Braun,et al.  Characterizing heat transfer coefficients for heat exchangers in standing wave thermoacoustic coolers , 2005 .

[282]  Keith Promislow,et al.  A simple, mathematical model of thermal coupling in fuel cell stacks , 2005 .

[283]  W. N. D. Santos,et al.  Thermal properties of melt polymers by the hot wire technique , 2005 .

[284]  R. Belarbi,et al.  Development of an Analytical Method for Simultaneous Heat and Moisture Transfer in Building Materials Utilizing Transfer Function Method , 2005 .

[285]  L. Chen,et al.  Effects of heat transfer and variable specific heats of working fluid on performance of a Miller cycle , 2005 .

[286]  Huang Zhihua,et al.  Study on the heat transfer of cross flow in vertical upward tubes , 2005 .

[287]  Celestino Angeli,et al.  The effect of thermodiffusion on the stability of a salinity gradient solar pond , 2005 .

[288]  Ali Koşar,et al.  Reduced Pressure Boiling Heat Transfer in Rectangular Microchannels With Interconnected Reentrant Cavities , 2005 .

[289]  R. L. McMasters,et al.  Detection of hot spot through inverse thermal analysis in superconducting RF cavities , 2005 .

[290]  Emilio Cafaro,et al.  Geometric Approach to Laminar Convection , 2005 .

[291]  Edward A. Luke,et al.  Coupling Heat Transfer and Fluid Flow Solvers for Multidisciplinary Simulations , 2005 .

[292]  Swati Mukhopadhyay,et al.  Study of MHD boundary layer flow over a heated stretching sheet with variable viscosity , 2005 .

[293]  X. Cui,et al.  A Discontinuous Finite-Element Formulation for Radiative Transfer in Axisymmetric Finite Cylindrical Enclosures and Coupling with Other Mode Heat Transfer , 2005 .

[294]  Fangming Jiang,et al.  Analytical Solution for Hyperbolic Heat Conduction in a Hollow Sphere , 2005 .

[295]  A. R. Noorpoor,et al.  Transient Thermal Analysis of Engine Exhaust Valve , 2005 .

[296]  Moo Hwan Kim,et al.  Heat Transfer Characteristics during Mist Cooling on a Heated Cylinder , 2005 .

[297]  Ioan Pop,et al.  Steady mixed convection flow of a micropolar fluid near the stagnation point on a vertical surface , 2005 .

[298]  O. Haddad,et al.  Developing Free-Convection Gas Flow in a Vertical Open-Ended Microchannel Filled with Porous Media , 2005 .

[299]  A. Viedma,et al.  Experimental study of heat transfer enhancement with wire coil inserts in laminar-transition-turbulent regimes at different Prandtl numbers , 2005 .

[300]  Thomas A. Litzinger,et al.  Transient Radiative Heat Transfer from a Plasma Produced by a Capillary Discharge , 2005 .

[301]  C. P. Tso,et al.  Experimental and Numerical Studies an a Rotating Cavity with Discrete Heat Sources with Conjugate Effects , 2005 .

[302]  Ioan Pop,et al.  The effect of g-jitter on double diffusion by natural convection from a sphere , 2005 .

[303]  Stavros A. Argyropoulos,et al.  Development of a heat transfer dimensionless correlation for spheres immersed in a wide range of Prandtl number fluids , 2005 .

[304]  Jay I. Frankel,et al.  Numerically Stabilizing Ill-Posed Moving Surface Problems Through Heat-Rate Sensors , 2005 .

[305]  H. Yapici,et al.  Numerical study on transient local entropy generation in pulsating turbulent flow through an externally heated pipe , 2005 .

[306]  Hosni I. Abu-Mulaweh,et al.  Heat-Transfer Coefficient for a Long Fin Cooled by Convection and Radiation , 2005 .

[307]  X. Cheng,et al.  Experimental studies on critical heat flux in vertical tight 37-rod bundles using freon-12 , 2005 .

[308]  Michael Wilson,et al.  Numerical Simulations of Convective Heat Transfer in Rayleigh-Bénard Convection and a Rotating Annulus , 2005 .

[309]  William A. Sirignano,et al.  Transient vaporization and burning in dense droplet arrays , 2005 .

[310]  S. M. Abdel-Gaied,et al.  Radiative and Thermal Dispersion Effects on Non-Darcy Natural Convection with Lateral Mass Flux for Non-Newtonian Fluid from a Vertical Flat Plate in a Saturated Porous Medium , 2005 .

[311]  Nancy Ma,et al.  A computational study of natural convection in a liquid-encapsulated molten semiconductor with a horizontal magnetic field , 2005 .

[312]  Lin Guiping,et al.  Investigation On Startup Behaviors of a Loop Heat Pipe , 2005 .

[313]  Bo Yu,et al.  DNS of fully developed turbulent heat transfer of a viscoelastic drag-reducing flow , 2005 .

[314]  J. R. Hull,et al.  Small-Channel Flow Boiling of One-Component Fluids and an Ethylene Glycol/Water Mixture , 2005 .

[315]  William A. Sirignano,et al.  A generalized analysis for liquid-fuel vaporization and burning , 2005 .

[316]  Abas Ramiar,et al.  A Novel Technique for Radiation Shape Factor Calculation Using CAD Software , 2005 .

[317]  Yuichi Mitsutake,et al.  CHF characteristics and correlations of concentric-tube open thermosyphon working with R22 , 2005 .

[318]  Michitsugu Mori,et al.  On the rise paths of single vapor bubbles after the departure from nucleation sites in subcooled upflow boiling , 2005 .

[319]  Min-Soo Kim,et al.  Flow boiling heat transfer of carbon dioxide in horizontal mini tubes , 2005 .

[320]  Marcia B. H. Mantelli,et al.  Analysis of Supercritical Startup of Cryogenic Heat Pipes With Parasitic Heat Loads , 2005 .

[321]  Balram Suman,et al.  An analytical model for fluid flow and heat transfer in a micro-heat pipe of polygonal shape , 2005 .

[322]  Li-Zhi Zhang,et al.  Turbulent three-dimensional air flow and heat transfer in a cross-corrugated triangular duct , 2005 .

[323]  E. M. Alawadhi,et al.  Thermal Insulation for a Pipe Using Phase Change Material , 2005 .

[324]  Lounes Oufer,et al.  Unsteady Heat Transfer and Pressure Drop in Channels with Obtacles Mounted on the Upper and Lower Walls , 2005 .

[325]  Kannan N. Iyer,et al.  Convective behaviour of a uniformly Joule-heated liquid pool in a rectangular cavity , 2005 .

[326]  Shyy Woei Chang,et al.  Heat Transfers in Tubes Fitted with Single, Twin, and Triple Twisted Tapes , 2005 .

[327]  Yogendra Joshi,et al.  Visualization study of pool boiling from thin confined enhanced structures , 2005 .

[328]  G. P. Peterson,et al.  Experimental Study of a Reversible Loop Heat Pipe , 2005 .

[329]  Jian Zhang,et al.  Simulation of Swirling Turbulent Heat Transfer in a Vortex Heat Exchanger , 2005 .

[330]  Hang Seok Choi,et al.  Large eddy simulation of turbulent flow and heat transfer in a channel with one wavy wall , 2005 .

[331]  Manab Kumar Das,et al.  Conjugate Heat Transfer Study of Two-Dimensional Laminar Incompressible Offset Jet Flows , 2005 .

[332]  B. Li,et al.  Boundary/Finite Element Modeling of Three-Dimensional Electromagnetic Heating During Microwave Food Processing , 2005 .

[333]  R. Cortell.  Flow and heat transfer of a fluid through a porous medium over a stretching surface with internal heat generation/absorption and suction/blowing , 2005 .

[334]  Po-Chuan Huang,et al.  Enhanced Heat-Source Cooling by Flow Pulsation and Porous Block , 2005 .

[335]  Weon-Keun Song,et al.  Thermal Transfer Analysis of Unpaved and Paved Freezing Soil Media Including Buried Pipelines , 2005 .

[336]  Thierry Maré,et al.  Mixed convection with flow reversal in the entrance region of inclined tubes , 2005 .

[337]  Chii-Dong Ho,et al.  Heat transfer of conjugated Graetz problems with laminar counterflow in double-pass concentric circular heat exchangers , 2005 .

[338]  A. I. Osipov,et al.  Natural convection in an annulus between coaxial horizontal cylinders with internal heat generation , 2005 .

[339]  Y. Qiu,et al.  Critical heat flux of steady boiling for saturated liquids jet impinging on the stagnation zone , 2005 .

[340]  Hyung Hee Cho,et al.  Heat transfer on flat surface impinged by an underexpanded sonic jet , 2005 .

[341]  C. Freek,et al.  An experimental investigation of fluid flow and wall temperature distributions in an automotive headlight , 2005 .

[342]  Romuald Mosdorf,et al.  Non-linear analyses of flow boiling in microchannels , 2005 .

[343]  Hamou Sadat,et al.  The onset of thermal instability of a two-dimensional hydromagnetic stagnation point flow , 2005 .

[344]  Vinayak Eswaran,et al.  Flow and heat transfer across a confined square cylinder in the steady flow regime: effect of Peclet number , 2005 .

[345]  Jane Y. Chang,et al.  Natural Convection Patterns in Right-Angled Triangular Cavities with Heated Vertical Sides and Cooled Hypotenuses , 2005 .

[346]  Jonathan Rose,et al.  A Theory of Film Condensation in Horizontal Noncircular Section Microchannels , 2005 .

[347]  Dimosthenis Trimis,et al.  Finite volume method in 3-D curvilinear coordinates with multiblocking procedure for radiative transport problems , 2005 .

[348]  J. L. Bhagoria,et al.  Augmentation of heat transfer coefficient by using 90° broken transverse ribs on absorber plate of solar air heater , 2005 .

[349]  Tsair-Wang Chung,et al.  Effects of the thickness and particle size of silica gel on the heat and mass transfer performance of a silica gel-coated bed for air-conditioning adsorption systems , 2005 .

[350]  Cheng-Hung Huang,et al.  A transient 3-D inverse problem in imaging the time-dependent local heat transfer coefficients for plate fin , 2005 .

[351]  Kukjin Chun,et al.  Analysis of laminar convective heat transfer in micro heat exchanger for stacked multi-chip module , 2005 .

[352]  Steven J. Eckels,et al.  Effect of Inundation Upon the Condensation Heat Transfer Performance of R-134a: Part II—Results (RP-984) , 2005 .

[353]  Debendra K. Das,et al.  Analytical and numerical studies on microscale heat sinks for electronic applications , 2005 .

[354]  Antonio Viedma,et al.  Performance analysis of a solar energy driven heating system , 2005 .

[355]  S. Ganesan,et al.  Finite element analysis of temperature rise in metal cutting processes , 2005 .

[356]  P. Marty,et al.  A numerical approach for the study of glass furnace regenerators , 2005 .

[357]  Yeshayahou Levy,et al.  Optimization of Wall Cooling in Gas Turbine Combustor Through Three-Dimensional Numerical Simulation , 2005 .

[358]  Jen Fin Lin,et al.  Thermal Analysis of the Transient Temperatures Arising at the Contact Spots of Two Sliding Surfaces , 2005 .

[359]  Steven J. Eckels,et al.  Effect of Inundation Upon the Condensation Heat Transfer Performance of R-134a: Part I—Facility Overview and Data Analysis (RP-984) , 2005 .

[360]  Baris Ozerdem,et al.  Effect of geometrical parameters on heat transfer and pressure drop characteristics of plate fin and tube heat exchangers , 2005 .

[361]  T. Katpradit,et al.  Correlation to predict heat transfer characteristics of a closed end oscillating heat pipe at critical state , 2005 .

[362]  Pradeep Bansal,et al.  Numerical study on heat and mass transfer characteristic of plate absorber , 2005 .

[363]  Yigzaw G. Yohanis,et al.  A simplified method of calculating heat flow through a two-phase heat exchanger , 2005 .

[364]  Cihat Arslanturk.  Simple correlation equations for optimum design of annular fins with uniform thickness , 2005 .

[365]  Andrea Frattolillo,et al.  Thermal analysis of a glass bending process , 2005 .

[366]  Delphine Meunier,et al.  A miniature silicon hot wire sensor for automatic wind speed measurements , 2005 .

[367]  Kim Tiow Ooi,et al.  Analytical effective length study of a flat plate heat pipe using point source approach , 2005 .

[368]  Zahid H. Ayub.  A new chart method for evaluating single-phase shell side heat transfer coefficient in a single segmental shell and tube heat exchanger , 2005 .

[369]  Michael M. Ohadi,et al.  Advances in control of frost on evaporator coils with an applied electric field , 2005 .

[370]  Y. Qiu,et al.  Critical heat flux in saturated and subcooled boiling for R-113 jet impingement on the stagnation zone , 2005 .

[371]  Wei Liu,et al.  Study of heat and moisture transfer in soil with a dry surface layer , 2005 .

[372]  Jim Alan Clark,et al.  Direct, continuous condensation of steam in flowing water , 2005 .

[373]  B. Maletic,et al.  Effect of Thermal Asymmetry on Heat Transfer in a Laminar Annular Flow , 2005 .

[374]  J. Yi,et al.  THEORETICAL SIMULATION OF HIGHLY EFFECTIVE COOLING WITH AN EVAPORATING ANNULAR FLOW IN A VERTICAL TUBE , 2005 .

[375]  Jana Šelih,et al.  Modeling of multiphase flow with phase change in porous media – a case study , 2005 .

[376]  M. Hasnaoui,et al.  Numerical study of partitions effect on multiplicity of solutions in an infinite channel periodically heated from below , 2005 .

[377]  Gaetano Lamberti,et al.  Analysis of film casting process: The heat transfer phenomena , 2005 .

[378]  Nikos G. Papayannakos,et al.  Membrane reactor modelling : A comparative study to evaluate the role of combined mass and heat dispersion in large-scale adiabatic membrane modules , 2005 .

[379]  Yu Wu,et al.  Heat transfer from a chemically oxidized or anodized copper plate to liquid helium , 2005 .

[380]  K. Charrada,et al.  Electric discharge fluid modelling with the contribution of convective and drift energy effects , 2005 .

[381]  Mónica Oliveira,et al.  SPH Simulation of Low Reynolds Number Planar Shear Flow and Heat Convection , 2005 .

[382]  L. Chen,et al.  Performance of an endoreversible four-heat-reservoir absorption heat-transformer with a generalized heat transfer law , 2005 .

[383]  V. A. F. Costa.  Diffusion as the physical model for complex phenomena and even for non‐diffusive phenomena: the (non) state of the art , 2005 .

[384]  Matej Vesenjak,et al.  Heat conduction in closed‐cell cellular metals , 2005 .

[385]  Andreas Öchsner,et al.  NUMERICAL AND ANALYTICAL CALCULATION OF THE ORTHOTROPIC HEAT TRANSFER PROPERTIES OF FIBRE REINFORCED MATERIALS , 2005 .

[386]  Zhen-hua Liu,et al.  HEAT TRANSFER IN A SUBCOOLED WATER FILM FALLING ACROSS A HORIZONTAL HEATED TUBE , 2005 .

[387]  A. Vasic,et al.  Lookup Tables for Predicting CHF and Film-Boiling Heat Transfer: Past, Present, and Future , 2005 .

[388]  Simon J. Rees,et al.  A Model for Annual Simulation of Standing Column Well Ground Heat Exchangers , 2005 .

[389]  J. Passos,et al.  Visualization of FC72 confined nucleate boiling , 2005 .

[390]  Emad M. Abo-Eldahab,et al.  Radiation effect on heat transfer of a micropolar fluid through a porous medium , 2005, Appl. Math. Comput..

[391]  Ahmed M. Salem,et al.  MHD free-convection flow of a non-Newtonian power-law fluid at a stretching surface with a uniform free-stream , 2005, Appl. Math. Comput..

[392]  Chin-Tai Chen,et al.  Study on the formation of Goertler vortices in natural convection flow over a rotating concave surface , 2005, Appl. Math. Comput..

[393]  S. Abdel-Khalik,et al.  Direct three-dimensional numerical simulation of nucleate boiling using the level contour reconstruction method , 2005 .

[394]  A. Majumdar,et al.  Monte Carlo Simulation of Silicon Nanowire Thermal Conductivity , 2005 .

[395]  Alastair S. Wood,et al.  On the convergence of the heat balance integral method , 2005 .

[396]  Milind A. Jog,et al.  Enhancement of Heat Transfer by an Electric Field for a Drop Translating at Intermediate Reynolds Number , 2005 .

[397]  F. Penot,et al.  Electronic components cooling by natural convection in horizontal channel with slots , 2005 .

[398]  David Bliss,et al.  Vertical gradient freezing using submerged heater growth with rotation and with weak magnetic and electric fields , 2005 .

[399]  J. A. Spim,et al.  A solidification heat transfer model and a neural network based algorithm applied to the continuous casting of steel billets and blooms , 2005 .

[400]  Adrian Bejan,et al.  Constructal multi-scale cylinders with natural convection , 2005 .

[401]  Saeed Zeinali Heris,et al.  Nanofluid laminar convection heat transfer , 2005 .

[402]  V. Nemchinsky,et al.  Dissociation reactive thermal conductivity in a two-temperature plasma , 2005 .

[403]  Werner J. A. Dahm,et al.  Effects of heat release on turbulent shear flows. Part 2. Turbulent mixing layers and the equivalence principle , 2005, Journal of Fluid Mechanics.

[404]  Liviu Marin,et al.  Detection of cavities in Helmholtz-type equations using the boundary element method , 2005 .

[405]  S. A. El-Wakil,et al.  Time-dependent radiative transfer through thin films: Chapman–Enskog-maximum entropy method , 2005 .

[406]  D. A. Kazenin,et al.  Experimental and numerical study of the Marangoni convection due to localized laser heating , 2005 .

[407]  Haruhiko Ohta,et al.  ISS experiments for the clarification of boiling and two-phase flow in microgravity and for the development of high-performance space cold plates , 2005 .

[408]  B. Wunderlich,et al.  Can one measure precise heat capacities with DSC or TMDSC? , 2005 .

[409]  A. Rajadurai,et al.  Simulation of casting solidification and its grain structure prediction using FEM , 2005 .

[410]  Philippe Ben-Abdallah,et al.  Spectral and refractive effects in non-stationary radiative transfer: a theoretical study in dense media , 2005 .

[411]  Hong-Liang Yi,et al.  Effect of reflecting modes on combined heat transfer within an anisotropic scattering slab , 2005 .

[412]  Win-Jin Chang,et al.  An inverse problem in simultaneously estimating boundary moisture fluxes in a porous annular cylinder , 2005 .

[413]  Akira Ono,et al.  Electrical delay technique in the picosecond thermoreflectance method for thermophysical property measurements of thin films , 2005 .

[414]  Rached Ben-Mansour,et al.  Entropy generation in developing laminar fluid flow through a circular pipe with variable properties , 2005 .

[415]  Wei Zhang,et al.  A Smart Bi-Directional Model of Heat Transfer and Free Surface Flow in Gas-Metal-Arc Fillet Welding for Practising Engineers , 2005 .

[416]  Abdelhakim Bendada,et al.  Understanding heat transfer mechanisms during the cooling phase of blow molding using infrared thermography , 2005 .

[417]  P. D. Lee,et al.  Integrated modeling for the manufacture of Ni-based superalloy discs from solidification to final heat treatment , 2005 .

[418]  Nicolas Moussiopoulos,et al.  A study of heat transfer effects on air pollution dispersion in street canyons by numerical simulations , 2005 .

[419]  António Tadeu,et al.  3D Transient Heat Transfer by Conduction and Convection across a 2D Medium using a Boundary Element Model , 2005 .

[420]  Andries Habraken,et al.  Mass transfer relations for transpiration evaporation experiments , 2005 .

[421]  C. Gururaja Rao,et al.  Simulation Studies on Multimode Heat Transfer from a Square-Shaped Electronic Device with Multiple Discrete Heat Sources , 2005 .

[422]  Benjamin Remy,et al.  Parameters estimation and measurement of thermophysical properties of liquids , 2005 .

[423]  Bin Xiao,et al.  Analysis of melting and resolidification in a two-component metal powder bed subjected to temporal Gaussian heat flux , 2005 .

[424]  J. C. Kloppers,et al.  The Lewis factor and its influence on the performance prediction of wet-cooling towers , 2005 .

[425]  A. Greco,et al.  Flow-boiling of R22, R134a, R507, R404A and R410A inside a smooth horizontal tube , 2005 .

[426]  Li-Zhi Zhang,et al.  Numerical Study of Periodically Fully Developed Flow and Heat Transfer in Cross-Corrugated Triangular Channels in Transitional Flow Regime , 2005 .

[427]  Man-Hoe Kim,et al.  Evaporating heat transfer of R22 and R410A in horizontal smooth and microfin tubes , 2005 .

[428]  Nancy Ma,et al.  Free convection in a liquid-encapsulated molten semiconductor in a vertical magnetic field , 2005 .

[429]  Hakan F. Oztop.  Numerical study of flow and heat transfer in curvilinear ducts: applications of elliptic grid generation , 2005 .

[430]  S. Chang,et al.  Heat transfer of rectangular narrow channel with two opposite scale-roughened walls , 2005 .

[431]  Mei Ning,et al.  The formation of rising liquid thin film on the fluted surface of a horizontal tube , 2005 .

[432]  Sven Wellsandt,et al.  Evaporation of R407C and R410A in a horizontal herringbone microfin tube: heat transfer and pressure drop , 2005 .

[433]  G. Nellis,et al.  Effectiveness-NTU Relationship for a Counterflow Heat Exchanger Subjected to an External Heat Transfer , 2005 .

[434]  J. W. Hwang,et al.  Heat Transfer on a Stationary Test Cylinder with Wake Generators , 2005 .

[435]  Morgan Heikal,et al.  New approaches to numerical modelling of droplet transient heating and evaporation , 2005 .

[436]  Sven Wellsandt,et al.  Prediction method for flow boiling heat transfer in a herringbone microfin tube , 2005 .

[437]  Nahmkeon Hur,et al.  Coupled Turbulent Flow, Heat, and Solute Transport in Continuous Casting Processes with an Electromagnetic Brake , 2005 .

[438]  Nawaf H. Saeid,et al.  Natural convection in a porous cavity with spatial sidewall temperature variation , 2005 .

[439]  Tsai-Shou Chang,et al.  Flow pulsation and baffle’s effects on the opposing mixed convection in a vertical channel , 2005 .

[440]  A. Faghri,et al.  Challenges and opportunities of thermal management issues related to fuel cell technology and modeling , 2005 .

[441]  Waion Wong,et al.  Simulation of Turbulent Flow and Forced Convection in a Triangular Duct with Internal Ribbed Surfaces , 2005 .

[442]  D. L. Young,et al.  Finite-Element Analysis of 3-D Viscous Flow and Mixed-Convection Problems by the Projection Method , 2005 .

[443]  Ioan Pop,et al.  Mixed convection from two thermal sources in a vertical porous layer , 2005 .

[444]  Sandile S. Motsa,et al.  Investigation of compliancy effects on the inviscid instability in fluid flow over a flat plate with heat transfer , 2005 .

[445]  Lioua Kolsi,et al.  Hydromagnetic Double-Diffusive Laminar Natural Convection in a Radiatively Participating Fluid , 2005 .

[446]  Yan Zhou,et al.  Momentum and heat transfer in a turbulent cylinder wake behind a streamwise oscillating cylinder , 2005 .

[447]  Samir Armando Salamah,et al.  Modeling of Turbulent Heat Transfer from an Array of Submerged Jets Impinging on a Solid Surface , 2005 .

[448]  A. Priarone.  Effect of surface orientation on nucleate boiling and critical heat flux of dielectric fluids , 2005 .

[449]  S. Grohmann.  Measurement and modeling of single-phase and flow-boiling heat transfer in microtubes , 2005 .

[450]  Marc Broussely,et al.  Experimental heat transfer on the windward surface of a perforated flat plate , 2005 .

[451]  Michel De Paepe,et al.  Experimental Determination of the Heat Transfer Coefficient of a Plate-Fin Heat Exchanger , 2005 .

[452]  C. P. Tso,et al.  Effects of rotation on natural convection cooling from three rows of heat sources in a rectangular cavity , 2005 .

[453]  Janusz S. Szmyd,et al.  Experimental study on the magnetic convection in a vertical cylinder , 2005 .

[454]  Howard P. Hodson,et al.  Contribution of vortex structures and flow separation to local and overall pressure and heat transfer characteristics in an ultralightweight lattice material , 2005 .

[455]  R. S. Alassar,et al.  Forced Convection Past an Oblate Spheroid at Low to Moderate Reynolds Numbers , 2005 .

[456]  Sandip Mazumder,et al.  A New Numerical Procedure for Coupling Radiation in Participating Media With Other Modes of Heat Transfer , 2005 .

[457]  Robert B. Roemer,et al.  An analytical study of heat transfer in a finite tissue region with two blood vessels and general Dirichlet boundary conditions , 2005 .

[458]  V. Ya. Gubarev,et al.  Heat Transfer between a Gas-Droplet Medium and a High-Temperature Surface , 2005 .

[459]  Anthony M. Jacobi,et al.  Dynamic dip testing as a method to assess the condensate drainage behavior from the air-side surface of compact heat exchangers , 2005 .

[460]  Cha'o-Kuang Chen,et al.  Estimation of unknown outer-wall heat flux in turbulent circular pipe flow with conduction in the pipe wall , 2005 .

[461]  Gilles Godard,et al.  Heat transfer from a line source located in the periodic laminar near wake of a circular cylinder , 2005 .

[462]  Józef Ignaczak.  The Second Law of Thermodynamics for a Two-Temperature Model of Heat Transport in Metal Films , 2005 .

[463]  V. V. Kalinchak,et al.  The Effect of the Temperature and Diameter of Porous Carbon Particles on the Kinetics of Chemical Reactions and Heat and Mass Transfer with Air , 2005 .

[464]  Cha'o-Kuang Chen,et al.  Natural Convection in a Vertical Microchannel , 2005 .

[465]  PengSheng Wei,et al.  Effects of Plasma Parameters on the Temperature Field in a Workpiece Experiencing Solid-Liquid Phase Transition , 2005 .

[466]  Hidetoshi Hashizume,et al.  Super-high heat flux removal using sintered metal porous media , 2005 .

[467]  Abdullah Abbas Kendoush,et al.  Experiments of fluid flow and heat convection in the wake of a disk facing a uniform stream , 2005 .

[468]  M. Marengo,et al.  Secondary atomisation produced by single drop vertical impacts onto heated surfaces , 2005 .

[469]  Pedro J. Coelho.  Fundamentals of a new method for the solution of the radiative transfer equation ? ? A preliminary v , 2005 .

[470]  Wilson F. N. Santos,et al.  Leading-Edge Bluntness Effects on Aerodynamic Heating and Drag of Power Law Body in Low-Density Hypersonic Flow , 2005 .

[471]  Qing-Long An,et al.  High Efficiency Cooling Technology Based on Green Manufacturing , 2005 .

[472]  Peter Rodgers,et al.  Numerical Heat Transfer Predictive Accuracy for an In-Line Array of Board-Mounted Plastic Quad Flat Back Components in Free Convection , 2005 .

[473]  K. W. Tou,et al.  An Experimental Study of Transient Heat Transfer From Discrete Heat Sources in Water Cooled Vertical Rectangular Channel , 2005 .

[474]  Franz Mayinger,et al.  Void fraction and heat transport in two-dimensional mixed size particle beds with internal heat sources , 2005 .

[475]  C. Balaras,et al.  Numerical simulation and performance assessment of a low capacity solar assisted absorption heat pump coupled with a sub-floor system , 2005 .

[476]  Moonyong Lee,et al.  The determination of superheated layer thickness and wall superheat in vertical tube natural circulation reboiler , 2005 .

[477]  M. A. Quintela,et al.  Defect assessment on radiant heaters using infrared thermography , 2005 .

[478]  C. P. Tso,et al.  Analyses of Convection Heat Transfer From Discrete Heat Sources in a Vertical Rectangular Channel , 2005 .

[479]  Antonio Campo,et al.  Quick identification of gases for enhancing heat transfer in turbulent pipe flows using standard correlation equations for the convective coefficient and the friction factor , 2005 .

[480]  A. Ben Larbi.  Statistical modelling of heat transfer for thermal bridges of buildings , 2005 .

[481]  Kune Y. Suh,et al.  Effect of interfacial wavy motion on film boiling heat transfer from isothermal downward-facing hemispheres , 2005 .

[482]  Kune Y. Suh,et al.  Heat and fission product transport in molten core material pool with crust , 2005 .

[483]  Antonio Ficarella,et al.  Numerical analysis of a cross-flow compact heat exchanger for vehicle applications , 2005 .

[484]  E. Akpinar,et al.  Evaluation of convective heat transfer coefficient of various crops in cyclone type dryer , 2005 .

[485]  J. Mota,et al.  Dynamic model of a supercritical carbon dioxide heat exchanger , 2005 .

[486]  R. Burkina,et al.  Hot-Spot Ignition of a Reactive Gas in an Inert Porous Medium , 2005 .

[487]  Pushkar Tandon,et al.  Predicting heat and mass transfer to a growing, rotating preform during soot deposition in the outside vapor deposition process , 2005 .

[488]  Hans Müller-Steinhagen,et al.  Effect of surface free energy on the adhesion of biofouling and crystalline fouling , 2005 .

[489]  Armel Davenel,et al.  Chilling and freezing of part-baked bread. Part I: An MRI signal analysis , 2005 .

[490]  Hans Müller-Steinhagen,et al.  Mathematical modelling of mixed salt precipitation during convective heat transfer and sub-cooled flow boiling , 2005 .

[491]  J. L. Parker,et al.  Enhanced boiling of HFE-7100 dielectric liquid on porous graphite , 2005 .

[492]  B. Gasanov,et al.  Experimental Setup for Studying the Chain Activation of Low-Temperature Boiling Sites in Superheated Liquid Droplets , 2005 .

[493]  Wasim Saman,et al.  Numerical analysis of a PCM thermal storage system with varying wall temperature , 2005 .

[494]  J. R. Limaverde,et al.  Heat and mass transfer in coffee fruits drying , 2005 .

[495]  Fernando Neto da Silva,et al.  An Alternative Approach to the Inversion Temperature , 2005 .

[496]  Rami Jumah,et al.  Modelling and Simulation of Continuous and Intermittent Radio Frequency-Assisted Fluidized Bed Drying of Grains , 2005 .

[497]  Dongke Zhang,et al.  A non-isothermal model of a bubbling fluidised-bed coal gasifier , 2005 .

[498]  Bourhan Tashtoush,et al.  Magnetic and buoyancy effects on melting from a vertical plate embedded in saturated porous media , 2005 .

[499]  Pai-Yi Wang,et al.  Performance analysis and comparison of an Atkinson cycle coupled to variable temperature heat reservoirs under maximum power and maximum power density conditions , 2005 .

[500]  Denis Bruneau,et al.  Drying and smoking of meat: heat and mass transfer modeling and experimental analysis , 2005 .

[501]  Yong Chan Kim,et al.  Heat transfer characteristics of flat plate finned-tube heat exchangers with large fin pitch , 2005 .

[502]  Chenxu Yu,et al.  Modeling of melt conveying and heat transfer in a twin-screw cheese stretcher , 2005 .

[503]  Juan I. Ramos.  Convection and radiation effects in hollow, compound optical fibers☆ , 2005 .

[504]  V. Bansod.  The Effects of Blowing and Suction on Double Diffusion by Mixed Convection over Inclined Permeable Surfaces , 2005 .

[505]  S. A. Isaev,et al.  Numerical Simulation of Unsteady-State Heat Transfer under Conditions of Laminar Transverse Flow past a Circular Cylinder , 2005 .

[506]  Tien-Chien Jen,et al.  Developing fluid flow and heat transfer in a channel partially filled with porous medium , 2005 .

[507]  J J Sánchez-Alvarez,et al.  Square patterns in rotating Rayleigh-Bénard convection. , 2005, Physical review. E, Statistical, nonlinear, and soft matter physics.

[508]  Sujoy Kumar Saha,et al.  Heat transfer and pressure drop characteristics of laminar flow in rectangular and square plain ducts and ducts with twisted-tape inserts , 2005 .

[509]  Clifford W. Padgett,et al.  A continuum-atomistic method for incorporating Joule heating into classical molecular dynamics simulations , 2005 .

[510]  N. K. Anand,et al.  A Numerical Study of Fluid Flow and Heat Transfer over a Bank of Flat Tubes , 2005 .

[511]  Nengli Zhang,et al.  Numerical analysis of heat transfer in pulsating turbulent flow in a pipe , 2005 .

[512]  Baskar Ganapathysubramanian,et al.  On the control of solidification using magnetic fields and magnetic field gradients , 2005 .

[513]  Vivek Sarin,et al.  Numerical Simulation of Mixed Convective Flow Over a Three-Dimensional Horizontal Backward Facing Step , 2005 .

[514]  Xin-She Yang,et al.  Modelling heat transfer of carbon nanotubes , 2005, 1003.1882.

[515]  H.-J. Pieper,et al.  Numerical simulation of thermally induced workpiece deformation in turning when using various cutting fluid applications , 2005 .

[516]  P. Hatzikonstantinou,et al.  Thermally developing flow in curved square ducts with internal fins , 2005 .

[517]  Zone-Ching Lin,et al.  Thermal conductivity investigation for upsetting with a procedure of combining inverse model and the proposed regularization of Tikhonov method , 2005 .

[518]  Claude H. Moog,et al.  Experimentation of melting kinetics control in a convective food thawing process , 2005, IEEE Transactions on Control Systems Technology.

[519]  E.M. Alawadhi.  Forced convection cooling enhancement for rectangular blocks using a wavy plate , 2005, IEEE Transactions on Components and Packaging Technologies.

[520]  Mieczysław Porowski.  An analytical model of a matrix heat exchanger with longitudinal heat conduction in the matrix in application for the exchanger dynamics research , 2005 .

[521]  Huihe Qiu,et al.  Integrating micromachined fast response temperature sensor array in a glass microchannel , 2005 .

[522]  Faris Tarlochan,et al.  Heat transfer model for predicting survival time in cold water immersion , 2005 .

[523]  Tarasankar DebRoy,et al.  A computational procedure for finding multiple solutions of convective heat transfer equations , 2005 .

[524]  Ruixian Cai,et al.  Explicit analytical solutions of the anisotropic Brinkman model for the natural convection in porous media (II) , 2005 .

[525]  D. Maillet,et al.  Modelling of heat, mass and charge transfer in a PEMFC single cell , 2005 .

[526]  A A Van Steenhoven,et al.  Modelling of temperature and perfusion during scalp cooling , 2005, Physics in medicine and biology.

[527]  Tarasankar DebRoy,et al.  A heat-transfer and fluid-flow-based model to obtain a specific weld geometry using various combinations of welding variables , 2005 .

[528]  Surendra Kumar,et al.  Heat Transfer Analysis and Estimation of Refractory Wear in an Iron Blast Furnace Hearth Using Finite Element Method , 2005 .

[529]  Fengrui Sun,et al.  Effect of heat transfer on the performance of two-stage semiconductor thermoelectric refrigerators , 2005 .

[530]  B. Janarthanan,et al.  Evaporative heat loss and heat transfer for open- and closed-cycle systems of a floating tilted wick solar still , 2005 .

[531]  Asif Ali,et al.  Lie group analysis of viscoelastic MHD aligned flow and heat transfer , 2005 .

[532]  J. Juul Rasmussen,et al.  Up-gradient transport in a probabilistic transport model , 2005 .

[533]  Robert B Roemer,et al.  An analytical study of ‘Poisson conduction shape factors’ for two thermally significant vessels in a finite, heated tissue , 2005, Physics in medicine and biology.

[534]  K Razi Naqvi,et al.  Brownian motion description of heat conduction by phonons. , 2005, Physical review letters.

[535]  B. Holmedal,et al.  Stability of squares and rolls in Rayleigh–Bénard convection in an infinite-Prandtl-number fluid between slabs , 2005, Journal of Fluid Mechanics.

[536]  Andrew W. Woods,et al.  Precipitate formation in a porous rock through evaporation of saline water , 2005, Journal of Fluid Mechanics.

[537]  Bernhard A. Schrefler,et al.  Experimental and finite element analysis of a hollow cylinder submitted to high temperatures , 2005 .

[538]  Man Yao,et al.  Development of an experimental system for the study of the effects of electromagnetic stirring on mold heat transfer , 2005 .

[539]  Vanja Kosar,et al.  Cure of polyester resin in a cylindrical mould heated by air , 2005 .

[540]  Khaled Ksaibati,et al.  ASSESSMENT OF TEMPERATURE FLUCTUATIONS IN ASPHALT PAVEMENTS DUE TO THERMAL ENVIRONMENTAL CONDITIONS USING A TWO-DIMENSIONAL TRANSIENT FINITE DIFFERENCE APPROACH , 2005 .

[541]  Paul Mummery,et al.  Thermal diffusivity of polymers by the laser flash technique , 2005 .

[542]  Man Yao,et al.  Monitoring and analysis of local mould thermal behaviour in continuous casting of round billets , 2005 .

[543]  Teodor Grosan,et al.  Application of a New Method for Radiative Heat Transfer to Flat Glass Tempering , 2005 .

[544]  Christelle Reynard,et al.  Experimental study of the onset of the 3D oscillatory thermocapillary convection around a single air or vapor bubble.: Influence on heat transfer , 2005 .

[545]  Yong X. Tao,et al.  Performance Evaluation of Liquid Flow With PCM Particles in Microchannels , 2005 .

[546]  Yogesh Jaluria,et al.  Optimization of a thermal manufacturing process: Drawing of optical fibers , 2005 .

[547]  Peter Stephan,et al.  Effect of the microscale wall topography on the thermocapillary convection within a heated liquid film , 2005 .

[548]  Reiner Buck,et al.  Numerical and Experimental Investigation of a Multiple Air Jet Cooling System for Application in a Solar Thermal Receiver , 2005 .

[549]  Peter R. Bannon,et al.  Adjustment to Injections of Mass, Momentum, and Heat in a Compressible Atmosphere , 2005 .

[550]  Cen Ke-fa,et al.  Optimal design of the separate type heat pipe heat exchanger , 2005 .

[551]  Amsini Sadiki,et al.  Finned tube banks configuration for the utilization of waste heat from a gas turbine station , 2005 .

[552]  Massimo Corcione,et al.  Correlating equations for free convection heat transfer from horizontal isothermal cylinders set in a vertical array , 2005 .

[553]  Ravi Prasher.  Modification of Planck Blackbody Emissive Power and Intensity in Particulate Media Due to Multiple and Dependent Scattering , 2005 .

[554]  José Rui Camargo,et al.  Transient natural convection heat transfer by double diffusion from a heated cylinder buried in a saturated porous medium , 2005 .

[555]  Tomáš Králík,et al.  Low temperature radiative properties of materials used in cryogenics , 2005 .

[556]  M. Kawaji,et al.  Thermal and flow behavior of ice slurries in a vertical rectangular channel—Part II. Forced convective melting heat transfer , 2005 .

[557]  Javier F. Urchueguía,et al.  Study about the flashing process through a metering expansion valve , 2005 .

[558]  Adam Fic,et al.  Solving Transient Nonlinear Heat Conduction Problems by Proper Orthogonal Decomposition and the Finite-Element Method , 2005 .

[559]  Nawaf H. Saeid,et al.  Periodic free convection from a vertical plate in a saturated porous medium, non-equilibrium model , 2005 .

[560]  Akhilesh Gupta,et al.  Enhancement of boiling heat transfer in a 5 × 3 tube bundle , 2005 .

[561]  Richard H. Pletcher,et al.  Effects of Wall Rotation on Heat Transfer to Annular Turbulent Flow: Outer Wall Rotating , 2005 .

[562]  Hiroshi Kawamura,et al.  Enhancement of heat transfer in subcooled flow boiling with microbubble emission , 2005 .

[563]  G. Ziskind,et al.  Numerical investigation of a PCM-based heat sink with internal fins , 2005 .

[564]  E. Velasco Gómez,et al.  Description and experimental results of a semi-indirect ceramic evaporative cooler , 2005 .

[565]  Ching-yu Yang,et al.  Estimation of the periodic thermal conditions on the non-Fourier fin problem , 2005 .

[566]  François Guermeur,et al.  Thermoacoustics and related oscillatory heat and fluid flows in micro heat exchangers , 2005 .

[567]  Oronzio Manca,et al.  Experimental Investigation of Natural Convection in an Asymmetrically Heated Vertical Channel with an Asymmetric Chimney , 2005 .

[568]  F. Sedat Tardu,et al.  Response of Wall Hot-Film Gages With Longitudinal Diffusion and Heat Conduction to the Substrate , 2005 .

[569]  Yen-Cho Chen,et al.  Stability of an oscillatory shear flow in a differentially heated vertical channel , 2005 .

[570]  Hiroyuki Ozoe,et al.  Numerical computation of magnetothermal convection of water in a vertical cylindrical enclosure , 2005 .

[571]  Siaw Kiang Chou,et al.  On the study of the temperature distribution within a human eye subjected to a laser source , 2005 .

[572]  Mariarosa Giardina,et al.  Rewetting of a hot vertical surface by liquid sprays , 2005 .

[573]  Chin Pan,et al.  Molecular dynamics simulation of a thin water layer evaporation and evaporation coefficient , 2005 .

[574]  Raffaele Savino,et al.  BLUNTED CONE-FLARE IN HYPERSONIC FLOW , 2005 .

[575]  Gautham Krishnamoorthy,et al.  Parallel Computations of Nongray Radiative Heat Transfer , 2005 .

[576]  J. Fricke,et al.  Silica aerogel granulate material for thermal insulation and daylighting , 2005 .

[577]  Nicolas Galanis,et al.  Coupled Conduction, Convection, Radiation Heat Transfer with Simultaneous Mass Transfer in Ice Rinks , 2005 .

[578]  R. Ricci,et al.  A quantitative IR thermographic method to study the laminar separation bubble phenomenon , 2005 .

[579]  V. V. Yagov,et al.  Heat transfer and crisis in swirl flow boiling , 2005 .

[580]  J. Scartezzini,et al.  Potential of quarterwave interference stacks for colored thermal solar collectors , 2005 .

[581]  Hélio Aparecido Navarro,et al.  A new approach for thermal performance calculation of cross-flow heat exchangers , 2005 .

[582]  F. Meillaud,et al.  Evaluation of a building using the emergy method , 2005 .

[583]  Eckhard Krepper,et al.  Measurement of bubble velocity profiles and turbulent diffusion coefficients of the gaseous phase in rectangular bubble column using image processing , 2005 .

[584]  Yves Candau,et al.  Improvement of building wall surface temperature measurements by infrared thermography , 2005 .

[585]  P. M. Ghanegaonkar,et al.  Heat transfer due to supersonic flow impingement on a vertical plate , 2005 .

[586]  Subhash C. Mishra,et al.  Application of the lattice Boltzmann method for solving the energy equation of a 2-D transient conduction–radiation problem , 2005 .

[587]  Hassan Peerhossaini,et al.  Heat and mass fluxes across density interfaces in a grid-generated turbulence , 2005 .

[588]  J. Mazumder,et al.  A Numerical Method for Multiphase Incompressible Thermal Flows with Solid–Liquid and Liquid–Vapor Phase Transformations , 2005 .

[589]  N. Altuntop,et al.  Heat transfer and thermal stress analysis in grooved tubes , 2005 .

[590]  Mehmet Kanoglu,et al.  Periodic solution of transient heat flow through multilayer walls and flat roofs by complex finite Fourier transform technique , 2005 .

[591]  J. L. Parker,et al.  Enhanced saturation and subcooled boiling of FC-72 dielectric liquid , 2005 .

[592]  Balaram Kundu,et al.  Optimum Profile of Thin Fins With Volumetric Heat Generation: A Unified Approach , 2005 .

[593]  Gregory Nellis,et al.  Heat transfer coefficient measurements for mixed gas working fluids at cryogenic temperatures , 2005 .

[594]  Andrey V. Kuznetsov,et al.  Heat transfer in a laminar flow in a helical pipe filled with a fluid saturated porous medium , 2005 .

[595]  Gilles Fraisse,et al.  Comparison of solar water tank storage modelling solutions , 2005 .

[596]  Wilson K. S. Chiu,et al.  Hybrid method to calculate direct exchange areas using the finite volume method and midpoint intergration , 2005 .

[597]  Phillip M. Ligrani,et al.  Effects Of Dimple Depth on Channel Nusselt Numbers and Friction Factors , 2005 .

[598]  Zheng-you Zhu,et al.  Differential quadrature method for steady flow of an incompressible second-order viscoelastic fluid and heat transfer model , 2005 .

[599]  M. Kawaji,et al.  Thermal and flow behavior of ice slurries in a vertical rectangular channel. Part I: Local distribution measurements in adiabatic flow , 2005 .

[600]  Daniel Fraser,et al.  Effect of Buoyancy on Heat Transfer in Supercritical Water Flow in a Horizontal Round Tube , 2005 .

[601]  M. El Ganaoui,et al.  The effect of wall temperature fluctuations on the heat transfer and fluid flow occuring in a liquid enclosure , 2005 .

[602]  A. Koşar,et al.  Forced convective heat transfer across a pin fin micro heat sink , 2005 .

[603]  F. J. Diez,et al.  Self-Preserving Mixing Properties of Steady Round Nonbuoyant Turbulent Jets in Uniform Crossflows , 2005 .

[604]  K. S. Lee,et al.  Experimental study on condensation heat transfer enhancement and pressure drop penalty factors in four microfin tubes , 2005 .

[605]  Larry C. Witte,et al.  Fully Developed Nucleate Boiling in Narrow Vertical Channels , 2005 .

[606]  Gian Luca Morini,et al.  Viscous heating in liquid flows in micro-channels , 2005 .

[607]  D. Bouris,et al.  Design of a novel, intensified heat exchanger for reduced fouling rates , 2005 .

[608]  Chin-Hsiang Cheng,et al.  Identification of Unknown Heating Elements Embedded in a Rectangular Package , 2005 .

[609]  Wei Shyy,et al.  Effect of Conjugate Heat Transfer on MEMS-Based Thermal Shear Stress Sensor , 2005 .

[610]  Siu-Kui Au,et al.  Heat transfer analysis using a Green’s function approach for uniformly insulated steel members subjected to fire , 2005 .

[611]  Chii-Dong Ho,et al.  Improvement in device performance of multi-pass flat-plate solar air heaters with external recycle , 2005 .

[612]  Salvatore Vasta,et al.  Thermal conductivity measurement of a PCM based storage system containing carbon fibers , 2005 .

[613]  Lingen Chen,et al.  Thermoelectric-generator with linear phenomenological heat-transfer law , 2005 .

[614]  Suman Chakraborty,et al.  Genetic Algorithm-Based Optimal Design of Plate Fins Following Minimum Entropy Generation Considerations , 2005 .

[615]  K. S. Lee,et al.  Single-phase heat transfer and flow characteristics of micro-fin tubes , 2005 .

[616]  Wojciech Lipiński,et al.  Multitube Rotary Kiln for the Industrial Solar Production of Lime , 2005 .

[617]  Hisham Ettouney,et al.  Heat Transfer During Phase Change of Paraffin Wax Stored in Spherical Shells , 2005 .

[618]  Ahmad Faris Ismail,et al.  Theoretical and Experimental Investigation of a Novel Multistage Evacuated Solar Still , 2005 .

[619]  Ruzhu Wang,et al.  Study on intermittent refrigeration phenomenon for solar solid adsorption refrigeration. , 2005 .

[620]  F. W. Yu,et al.  Application of direct evaporative coolers for improving the energy efficiency of air-cooled chillers , 2005 .

[621]  Hidayat Shahid,et al.  Energy performance assessment of a window with a horizontal Venetian blind , 2005 .

[622]  Simon J. Rees,et al.  Transient conduction analytical solutions for testing of building energy simulation programs , 2005 .

[623]  Miroslaw Zukowski.  Heat transfer and pressure drop characteristics of the underfloor air distribution system , 2005 .

[624]  P.M.V. Subbarao,et al.  Experimental study of the effect of winglet location on heat transfer enhancement and pressure drop in fin-tube heat exchangers , 2005 .

[625]  Cherif Bougriou,et al.  Determination of apparent heat transfer coefficient by condensation in an industrial finned-tube heat exchanger: prediction , 2005 .

[626]  Mustafa Ilbas,et al.  The effect of thermal radiation and radiation models on hydrogen–hydrocarbon combustion modelling , 2005 .

[627]  Zoran Filipi,et al.  Characterizing the thermal sensitivity of a gasoline homogeneous charge compression ignition engine with measurements of instantaneous wall temperature and heat flux , 2005 .

[628]  Mukund V. Karwe,et al.  THERMAL TRANSPORT IN A MULTIPLE JET IMPINGEMENT OVEN , 2005 .

[629]  F. S. Marra,et al.  Heat and mass fluxes in the presence of fast exothermic superficial reaction , 2005 .

[630]  R. Viskanta,et al.  EFFECT OF RADIATION ABSORPTION ON FUEL DROPLET EVAPORATION , 2005 .

[631]  A. Lewandowski,et al.  Heat capacities of ionic liquids and their heats of solution in molecular liquids , 2005 .

[632]  Fengrui Sun,et al.  Thermo-economic optimization of an endoreversible four-heat-reservoir absorption-refrigerator , 2005 .

[633]  Colin Pritchard,et al.  Heat Transfer at the Surface of Sieve Trays , 2005 .

[634]  R. Mascheroni,et al.  Modelling of heat and mass transfer during (osmo) dehydrofreezing of fruits , 2005 .

[635]  L. Campañone,et al.  Mathematical analysis of microwave heating process , 2005 .

[636]  Somchai Wongwises,et al.  Effect of fin pitch and number of tube rows on the air side performance of herringbone wavy fin and tube heat exchangers , 2005 .

[637]  Nathalie Mazet,et al.  Modeling of heat and mass transfer coupling with gas¿solid reaction in a sorption heat pump cooled by a two-phase closed thermosyphon , 2005 .

[638]  Feridun Hamdullahpur,et al.  Thermal aspects of a circulating fluidized bed with air staging , 2005 .

[639]  Fengrui Sun,et al.  Performance limits of real absorption refrigerators , 2005 .

[640]  Fengrui Sun,et al.  Frequency-dependent performance of an endoreversible Carnot engine with a linear phenomenological heat-transfer law , 2005 .

[641]  Fengrui Sun,et al.  Optimal performance of a generalized irreversible Carnot-engine , 2005 .

[642]  Roland Span,et al.  Flow Boiling of Highly Viscous Fluids in a Vertical Annular Tube , 2005 .

[643]  Jahar Sarkar,et al.  Transcritical CO2 heat pump systems: exergy analysis including heat transfer and fluid flow effects , 2005 .

[644]  W. Cheng,et al.  Three dimensional iron flow and heat transfer in the hearth of a blast furnace during tapping process , 2005 .

[645]  King-Leung Wong,et al.  Complete heat transfer solutions of an insulated regular polyhedron by using an RPSWT model , 2005 .

[646]  Kim Choon Ng,et al.  Experimental investigation of silica gel-water adsorption chillers with and without a passive heat recovery scheme , 2005 .

[647]  Albert J. Shih,et al.  Inverse Heat Transfer Solution of the Heat Flux Due to Induction Heating , 2005 .

[648]  Pietro Asinari,et al.  Numerical prediction of turbulent convective heat transfer in mini/micro channels for carbon dioxide at supercritical pressure , 2005 .

[649]  Bin-Juine Huang,et al.  Study of a high efficiency residential split water-cooled air conditioner , 2005 .

[650]  Armando C. Oliveira,et al.  The effect of condenser heat transfer on the energy performance of a plate heat pipe solar collector , 2005 .

[651]  E. Bilgen,et al.  Natural convection in cavities with a thin fin on the hot wall , 2005 .

[652]  Ching-Song Jwo,et al.  Experimental study on thermal properties of brines containing nanoparticles , 2005 .

[653]  N. Galanis,et al.  Heat transfer enhancement by using nanofluids in forced convection flows , 2005 .

[654]  Frank A. Coutelieris,et al.  Heat transfer phenomena in a solid oxide fuel cell: An analytical approach , 2005 .

[655]  Takao Kashiwagi,et al.  Visualization of Transient Solidification Process of Aqueous Solution by Dual Wavelength Holographic Interferometry , 2005 .

[656]  Sridhar Kulkarni,et al.  The Onset of Convection in an Anisotropic Porous Layer Using a Thermal Non-Equilibrium Model , 2005 .

[657]  P. K. Jain,et al.  Parallel EFG algorithm for heat transfer problems , 2005, Adv. Eng. Softw..

[658]  David Jou,et al.  A phenomenological scaling approach for heat transport in nano-systems , 2005, Appl. Math. Lett..

[659]  Bin Zhao,et al.  Transient Flow and Temperature Transport in Continuous Casting of Steel Slabs , 2005 .

[660]  Jungho Kim,et al.  Heater size and heater aspect ratio effects on subcooled pool boiling heat transfer in low-g , 2005 .

[661]  Satish G. Kandlikar,et al.  An Experimental Study on the Effect of Gravitational Orientation on Flow Boiling of Water in 1054×197μm Parallel Minichannels , 2005 .

[662]  Suresh V. Garimella,et al.  Jet Flows Around Microbubbles in Subcooled Boiling , 2005 .

[663]  Dong Liu,et al.  Nucleate Boiling in Microchannels , 2005 .

[664]  Emad M. Aboeldahab,et al.  Thermal radiation effects on MHD flow past a semi-infinite inclined plate in the presence of mass diffusion , 2005 .

[665]  Yoshihiro Ochiai.  Three-dimensional steady thermal stress analysis by triple-reciprocity boundary element method , 2005 .

[666]  Atul P. Patil,et al.  Surface energy effect on boiling heat transfer , 2005 .

[667]  Tao Lu,et al.  Numerical and experimental investigation of convective drying in unsaturated porous media with bound water , 2005 .

[668]  Gh. Juncu,et al.  Unsteady forced convection heat/mass transfer from a flat plate , 2005 .

[669]  P. K. Panday,et al.  Experimental analysis of the local heat transfer coefficient of falling film evaporation with and without co-current air flow velocity , 2005 .

[670]  Xiao Dong Chen,et al.  Air Drying of Food and Biological Materials—Modified Biot and Lewis Number Analysis , 2005 .

[671]  X. Zeng,et al.  A prognostic scheme of sea surface skin temperature for modeling and data assimilation , 2005 .

[672]  Bekir Sami Yilbas,et al.  Analytical solution for temperature field in thin film initially heated by a short-pulse laser source , 2005 .

[673]  Anthony T. Patera,et al.  Inverse identification of thermal parameters using reduced-basis method , 2005 .

[674]  Win-Jin Chang,et al.  Estimating thermal transport in deep X-ray lithography with an inversion method , 2005 .

[675]  杨海天,et al.  SOLVING 2-D NONLINEAR COUPLED HEAT AND MOISTURE TRANSFER PROBLEMS VIA A SELF-ADAPTIVE PRECISE ALGORITHM IN TIME DOMAIN , 2005 .

[676]  I. Bizjak,et al.  Measurement of the wrong-sign decays D0 --> K+ pi- pi0 and D0 --> K+ pi- pi+ pi-, and search for CP violation. , 2005, Physical review letters.

[677]  S. A. El-Wakil,et al.  Transmission of radiation through an aerosol medium , 2005 .

[678]  Alan A. Wray,et al.  A half-moment model for radiative transfer in a 3D gray medium and its reduction to a moment model for hot, opaque sources , 2005 .

[679]  C. Gostoli,et al.  Heat and mass transfer in osmotic distillation with brines, glycerol and glycerol–salt mixtures , 2005 .

[680]  N. V. Bhat,et al.  Modeling of Deposit Formation from "Waxy" Mixtures via Moving Boundary Formulation: Radial Heat Transfer under Static and Laminar Flow Conditions , 2005 .

[681]  F. Perrier.  Scaling in convective evaporation and sidewall boundary layer , 2005 .

[682]  Li Yi,et al.  Effect of clothing material on thermal responses of the human body , 2005 .

[683]  Mongi Mabrouk,et al.  Homogenization of a non-linear degenerate parabolic problem in a highly heterogeneous periodic medium , 2005 .

[684]  G. Morfill,et al.  Heat transfer in a two-dimensional crystalline complex (dusty) plasma. , 2005, Physical review letters.

[685]  D. Funfschilling,et al.  Heat transport in turbulent Rayleigh-Bénard convection: Effect of finite top- and bottom-plate conductivities , 2005, physics/0507053.

[686]  Zhiming Gao,et al.  Theoretical analysis of dehumidification process in a desiccant wheel , 2005 .

[687]  W. Lipinski,et al.  Transient radiative heat transfer within a suspension of coal particles undergoing steam gasification , 2005 .

[688]  Luciano Afferrante,et al.  Separated steady state solutions for two thermoelastic half-planes in contact with out-of-plane sliding , 2005 .

[689]  G. N. Tiwari,et al.  Thermal modellina of a greenhouse having a north wall using periodic analysis and its experimental validation , 2005 .

[690]  Zahid H. Ayub.  Recent Developments in CO2 Heat Transfer , 2005 .

[691]  G. Gamrat,et al.  Conduction and entrance effects on laminar liquid flow and heat transfer in rectangular microchannels , 2005 .

[692]  Ching-Yu Yang,et al.  Estimation of Multiple Heat Sources in Two-Dimensional Heat Conduction Problems , 2005 .

[693]  Yoshitomo Inaba,et al.  Natural convection heat transfer of high temperature gas in an annulus between two vertical concentric cylinders , 2005 .

[694]  In Cheol Bang,et al.  Critical heat flux performance for flow boiling of R-134a in vertical uniformly heated smooth tube and rifled tubes , 2005 .

[695]  Josua P. Meyer,et al.  Heat Transfer during Annular Tube Contact in a Helically Coiled Tube-in-Tube Heat Exchanger , 2005 .

[696]  Hong Qi,et al.  Study on the imaginary temperature of open boundary wall in cylindrical medium by partition allocation method , 2005 .

[697]  Thomas E. Diller,et al.  Simultaneous Heat Flux and Velocity Measurements in a Transonic Turbine Cascade , 2005 .

[698]  L. Kh. Ingel,et al.  Mechanism of convective instability of a binary mixture , 2005 .

[699]  Ping-Hei Chen,et al.  Forced convective heat transfer of 45° rib-roughened fin flows , 2005 .

[700]  Sumanta Acharya,et al.  Latticework (Vortex) Cooling Effectiveness: Rotating Channel Experiments , 2005 .

[701]  Liviu Marin,et al.  Numerical solution of the Cauchy problem for steady-state heat transfer in two-dimensional functionally graded materials , 2005 .

[702]  Amaresh Dalal,et al.  Laminar natural convection in an inclined complicated cavity with spatially variable wall temperature , 2005 .

[703]  Seonho Cho,et al.  Topological Shape Optimization of Heat Conduction Problems using Level Set Approach , 2005 .

[704]  G. F. Naterer,et al.  Surface Micro-Profiling for Reduced Energy Dissipation and Exergy Loss in Convective Heat Transfer , 2005 .

[705]  R. A. Bortolozzi,et al.  Effects of thermal spot configurations on the flow through porous media driven by natural and forced convection , 2005 .

[706]  Carey J. Simonson,et al.  Measuring and modeling vapor boundary layer growth during transient diffusion heat and moisture transfer in cellulose insulation , 2005 .

[707]  Ching-Jenq Ho,et al.  Heat transfer characteristics of a rectangular natural circulation loop containing solid‐liquid phase‐change material suspensions , 2005 .

[708]  Claudio A. Estrada,et al.  Numerical Study of Transient and Steady-State Natural Convection and Surface Thermal Radiation in a Horizontal Square Open Cavity , 2005 .

[709]  Waion Wong,et al.  Flow and Forced-Convection Characteristics of Turbulent Flow Through Parallel Plates with Periodic Transverse Ribs , 2005 .

[710]  Scott J. Ormiston,et al.  Analysis of Laminar Forced Convection of Air Crossflow in In-Line Tube Banks with NonSquare Arrangements , 2005 .

[711]  P. Rajesh Kanna,et al.  Conjugate forced convection heat transfer from a flat plate by laminar plane wall jet flow , 2005 .

[712]  Cheng Lin,et al.  Heat transfer characteristics of air cross-flow for in-line arrangement of spirally corrugated tube and smooth tube bundles , 2005 .

[713]  G. V. Dashkov,et al.  Heat and Mass Transfer under Cooling of Flowing Water Sheets by an Air Counterflow , 2005 .

[714]  J. Copetti,et al.  Natural convection in a tank of oil: experimental validation of a numerical code with prescribed boundary condition , 2005 .

[715]  Fue-Sang Lien,et al.  Conjugate turbulent forced convection in a channel with an array of ribs , 2005 .

[716]  Pradeep G. Siddheshwar,et al.  Effects of radiation and heat source on MHD flow of a viscoelastic liquid and heat transfer over a stretching sheet , 2005 .

[717]  N. M. Rao,et al.  Comparison of dynamic performance for direct and fluid coupled indirect heat exchange systems , 2005 .

[718]  A. F. Polyakov,et al.  Numerical Simulation of Convection-Conduction Heat Transfer in a Block of Rectangular Microchannels , 2005 .

[719]  Lounes Oufer,et al.  Numerical heat transfer in a rectangular channel with mounted obstacles on upper and lower walls , 2005 .

[720]  Roy J. Issa,et al.  A Numerical Model for the Mist Dynamics and Heat Transfer at Various Ambient Pressures , 2005 .

[721]  Sung Jin Kim,et al.  Fluid Flow and Thermal Characteristics of a Microchannel Heat Sink Subject to an Impinging Air Jet , 2005 .

[722]  M. A. Ortega,et al.  Heat Transfer Studies in the Flow Over Shallow Cavities , 2005 .

[723]  Zhennan Zhao,et al.  Experimental Investigations of Flow Resistance and Convection Heat Transfer and Prediction of Cold Heat-Storage Characteristics for a Phase-Change Emulsion in a Coiled Circular Tube , 2005 .

[724]  Ioan Pop,et al.  Exact solutions for a longitudinal steady mixed convection flow over a permeable vertical thin cylinder in a porous medium , 2005 .

[725]  R. Belarbi,et al.  Modelling solar effects on the heat and mass transfer in a street canyon, a simplified approach , 2005 .

[726]  T. W. Horst,et al.  Mechanically aspirated radiation shields: A CFD and neural network design analysis , 2005 .

[727]  Ping-Hei Chen,et al.  Heat transfer in a twin-blow narrow channel with two opposite walls roughened by skewed ribs arranged in staggered manner , 2005 .

[728]  C. J. Kobus,et al.  Utilizing disk thermistors to indirectly measure convective heat transfer coefficients for forced, natural and combined (mixed) convection , 2005 .

[729]  P. Tzeng,et al.  Influence of number of simulated particles on DSMC modeling of micro-scale Rayleigh–Bénard flows , 2005 .

[730]  A. Rezzoug,et al.  Dimensionless and analytical studies of the thermal stability of a high temperature superconducting tube , 2005 .

[731]  S. A. Isaev,et al.  Comparative Analysis of the Vortex Heat Exchange in Turbulent Flows around a Spherical Hole and a Two-Dimensional Trench on a Plane Wall , 2005 .

[732]  Mohammad Najafi,et al.  A Meshless Local Petrov-Galerkin Method for Fluid Dynamics and Heat Transfer Applications , 2005 .

[733]  Kamel Ghali,et al.  Ventilation rates of micro-climate air annulus of the clothing-skin system under periodic motion , 2005 .

[734]  N. M. Rao,et al.  Stability Behavior of a Natural Circulation Loop with End Heat Exchangers , 2005 .

[735]  I. A. Hassanien,et al.  Nonclassical Thermal Effects in Stokes’ Second Problem for Micropolar Fluids , 2005 .

[736]  N. M. Rao,et al.  Dynamic performance of a natural circulation loop with end heat exchangers under different excitations , 2005 .

[737]  Magesh Thiruvengadam,et al.  Bifurcated three-dimensional forced convection in plane symmetric sudden expansion , 2005 .

[738]  Wei-Mon Yan,et al.  Thermofluid characteristics of frosted finned-tube heat exchangers , 2005 .

[739]  T. Shedd,et al.  Spray impingement cooling with single- and multiple-nozzle arrays. Part I: Heat transfer data using FC-72 , 2005 .

[740]  G. S. Shubin.  Development of Certain Aspects of the A. V. Luikov Heat- and Mass-Transfer Theory , 2005 .

[741]  Cristina H. Amon,et al.  Comparison of Different Phonon Transport Models for Predicting Heat Conduction in Silicon-on-Insulator Transistors , 2005 .

[742]  Emad M. Abo-Eldahab,et al.  Hydromagnetic three-dimensional free convective heat transfer over a stretching surface embedded in a non-Darcian porous medium in the presence of heat generation or absorption , 2005 .

[743]  Fengrui Sun,et al.  Optimal power output and entropy generation rate for an endoreversible Carnot cycle using a linear phenomenological heat transfer law , 2005 .

[744]  Ephraim M Sparrow,et al.  Universal solutions for the streamwise variation of the temperature of a moving sheet in the presence of a moving fluid , 2005 .

[745]  H. R. Tschudi,et al.  Transient Radiative and Conductive Heat Transfer in Ceramic Materials Subjected to Laser Heating , 2005 .

[746]  Mohd. Zulfiquar Hafiz,et al.  Buoyancy and thermocapillary driven convection flow of an electrically conducting fluid in an enclosure with heat generation , 2005 .

[747]  Michael G. Dunn,et al.  Aerodynamic and Heat-flux Measurements with Predictions on a Modern One and One-Half State High Pressure transonic Turbine , 2005 .

[748]  Carsie A. Hall,et al.  Heat transfer characterization of the solidification process resulting from a spray forming process , 2005 .

[749]  Y. Msaad.  A Numerical Methodology for Coupled Diffusive Transfer Modeling: Application to Concrete Subjected to Heating , 2005 .

[750]  Lars Davidson,et al.  Computations of Flow Field and Heat Transfer in a Stator Vane Passage Using the v2¯−f Turbulence Model , 2005 .

[751]  Jan A. Visser,et al.  Capturing sudden increase in heat transfer on the suction side of a turbine blade using a navier-stokes solver , 2005 .

[752]  Eduard Egusquiza,et al.  Computational fluid dynamics modeling of impinging gas-jet systems: II. Application to an industrial cooling system device , 2005 .

[753]  S. T. Ro,et al.  Analysis of the frost growth on a flat plate by simple models of saturation and supersaturation , 2005 .

[754]  V. B. Ankudinov,et al.  An Experimental Investigation of Convection Heat Transfer in Ordered Flows of Monodisperse Droplets , 2005 .

[755]  Derek B. Ingham,et al.  Two-dimensional thermal analysis of a polygonal fin with two tubes on a square pitch , 2005 .

[756]  Waldemar Kuczyński,et al.  Investigation of Boiling of Refrigeration Medium Under Periodic Disturbance Conditions , 2005 .

[757]  Vahab Hassani,et al.  The Fin-on-Plate Heat Exchanger: A New Configuration for Air-Cooled Power Plants , 2005 .

[758]  Bingbing Chen,et al.  Experimental studies on transient features of natural convection in particles suspensions , 2005 .

[759]  Shigenao Maruyama,et al.  Laminar Natural Convection Heat Transfer From a Vertical Baffled Plate Subjected to a Periodic Oscillation , 2005 .

[760]  Tony Arts,et al.  Experimental Investigation of the Aerothermal Performance of a High Blockage Rib-Roughened Cooling Channel , 2005 .

[761]  F. Méndez,et al.  Forced convection on a heated horizontal flat plate with finite thermal conductivity in a non-Darcian porous medium , 2005 .

[762]  Jae Min Hyun,et al.  Transient buoyant convection of air in an enclosure under strong magnetic effect , 2005 .

[763]  Antonio Campo,et al.  Experimental Study of Natural Convection from Electrically Heated Vertical Cylinders Immersed in Air , 2005 .

[764]  M. Fénot,et al.  Local heat transfer due to several configurations of circular air jets impinging on a flat plate with and without semi-confinement , 2005 .

[765]  C. Saunders,et al.  A modelling study of the effect of cloud saturation and particle growth rates on charge transfer in thunderstorm electrification , 2005 .

[766]  Bengt Sundén,et al.  Transient response of plate heat exchangers considering effect of flow maldistribution , 2005 .

[767]  Lei Wang,et al.  Experimental Investigation of Local Heat Transfer in a Square Duct With Continuous and Truncated Ribs , 2005 .

[768]  W. Hsieh,et al.  Measurement and correlation of hydraulic resistance of flow through woven metal screens , 2005 .

[769]  Raj M. Manglik,et al.  Additive Adsorption and Interfacial Characteristics of Nucleate Pool Boiling in Aqueous Surfactant Solutions , 2005 .

[770]  B. Reddy,et al.  Effect of dilute and dense phase operating conditions on bed-to-wall heat transfer mechanism in a circulating fluidized bed combustor , 2005 .

[771]  Atila P. Silva Freire,et al.  The near wall behavior of an impinging jet , 2005 .

[772]  Ali J. Chamkha,et al.  Flow and heat transfer of a couple-stress fluid sandwiched between viscous fluid layers , 2005 .

[773]  Bo Yu,et al.  The computed characteristics of turbulent flow and convection in concentric circular annuli. Part IV: Generalizations , 2005 .

[774]  Xiong Zhang,et al.  Solution of Transient Temperature Field for Thermographic NDT Under Joule Effect Heating , 2005 .

[775]  Peter Vadasz,et al.  Lack of oscillations in Dual-Phase-Lagging heat conduction for a porous slab subject to imposed heat flux and temperature , 2005 .

[776]  Jinliang Xu,et al.  High speed flow visualization of a closed loop pulsating heat pipe , 2005 .

[777]  Bassam A. Younis,et al.  Prediction of Vortex Shedding with Heat Transfer , 2005 .

[778]  Vijay K. Dhir,et al.  Optimized Heat Transfer for High Power Electronic Cooling Using Arrays of Microjets , 2005 .

[779]  Y. Morsi,et al.  A Non-Darcian Numerical Modeling in Domed Enclosures Filled With Heat-Generating Porous Media , 2005 .

[780]  Scott K. Thomas,et al.  Fluid Flow in Axial Reentrant Grooves with Application to Heat Pipes , 2005 .

[781]  Chin-Hsiang Cheng,et al.  Numerical Study of Effects of Inclination on Buoyancy-Induced Flow Oscillation in a Lid-Driven Arc-Shaped Cavity , 2005 .

[782]  E. Kaschnitz,et al.  Three-Dimensional Finite-Element Analysis of High-Speed (Millisecond) Measurements , 2005 .

[783]  Takashi Abe,et al.  Absorption Spectroscopy for Temperature Measurement Behind Shock Wave at Super-Orbital Velocity , 2005 .

[784]  XinGang Liang,et al.  Field synergy optimization and enhanced heat transfer by multi-longitudinal vortexes flow in tube , 2005 .

[785]  H. M. Duwairi,et al.  Viscous and Joule heating effects on forced convection flow from radiate isothermal porous surfaces , 2005 .

[786]  J. Thome,et al.  Investigation of Flow Boiling in Horizontal Tubes: Part II, Development of a New Heat Transfer Model for Stratified-Wavy, Dryout and Mist Flow Regimes , 2005 .

[787]  J. Thome,et al.  Investigation of Flow Boiling in Horizontal Tubes: Part I, A New Diabatic Two-Phase Flow Pattern Map , 2005 .

[788]  J. Xamán,et al.  Numerical study of heat transfer by laminar and turbulent natural convection in tall cavities of façade elements , 2005 .

[789]  Hartmut Hillmer,et al.  Heat transfer improvement in quasi-monolithic integration technology , 2005 .

[790]  Qiu Suizheng,et al.  Two-phase flow and boiling heat transfer in two vertical narrow annuli , 2005 .

[791]  Ramezanali Mahdavinejad,et al.  Heat transfer analysis of EDM process on silicon carbide , 2005 .

[792]  Giampietro Fabbri.  Optimum cross-section design of internally finned tubes cooled by a viscous fluid , 2005 .

[793]  E. Groll,et al.  Review Article: A Critical Review of the Influence of Lubricants on the Heat Transfer and Pressure Drop of Refrigerants, Part 1: Lubricant Influence on Pool and Flow Boiling , 2005 .

[794]  Johan Meyers,et al.  Modelling and control of heat transfer phenomena inside a ventilated air space , 2005 .

[795]  Hideo Inaba,et al.  Study of an Efficient Dehumidifying System Utilizingm Phase Change of Intermediate Pressure Refrigerant , 2005 .

[796]  Paisarn Naphon,et al.  On the performance and entropy generation of the double-pass solar air heater with longitudinal fins , 2005 .

[797]  Dieter Bohn,et al.  Conjugate Flow and Heat Transfer Investigation of a Turbo Charger , 2005 .

[798]  Chao-Ho Lan,et al.  Analysis of Cross-Flow Type of Air-to-Air Total Heat Exchangers Made of Functional Paper , 2005 .

[799]  Qian Zhou,et al.  Inner heat source model with heat and moisture transfer in soil around the underground heat exchanger , 2005 .

[800]  Giovanni Cortella,et al.  Air-cooled condensing systems for home and industrial appliances , 2005 .

[801]  Moh’d A. Al-Nimr,et al.  Assessment of the local thermal non-equilibrium condition in developing forced convection flows through fluid-saturated porous tubes , 2005 .

[802]  Sen Wang,et al.  Research and development of consolidated adsorbent for adsorption systems , 2005 .

[803]  Teuku Meurah Indra Mahlia,et al.  Thermal and melting heat transfer characteristics in a latent heat storage system using mikro , 2005 .

[804]  F. Russo,et al.  Experimental investigation of a solid adsorption chiller based on a heat exchanger coated with hydrophobic zeolite , 2005 .

[805]  Kai Choong Leong,et al.  The effect of operating conditions on the performance of zeolite/water adsorption cooling systems , 2005 .

[806]  Yunguang Chen,et al.  Simulation of a cavity insulated by a vertical single band cold air curtain , 2005 .

[807]  Gilles Flamant,et al.  Production of hydrogen by thermal methane splitting in a nozzle-type laboratory-scale solar reactor , 2005 .

[808]  A. G. Murav’ev.  Mathematical Modeling of Heat and Mass Transfer in Gas Absorption on a Drop of a Volatile Absorbent , 2005 .

[809]  Yong Tae Kang,et al.  Numerical and Experimental Study for Falling Film in Ammonia Absorption Refrigeration Systems , 2005 .

[810]  Nobuyuki Imaishi,et al.  Marangoni flow in half-zone liquid bridge of molten tin under ramped temperature difference , 2005 .

[811]  Aparajita Datta,et al.  Milk fouling simulation in helical triple tube heat exchanger , 2005 .

[812]  Debendra K. Das,et al.  A Computational Scheme for Fluid Flow and Heat Transfer Analysis in Porous Media for Recovery of Oil and Gas , 2005 .

[813]  S. C. Mojumdar,et al.  Aspects of thermal conductivity relative to heat flow , 2005 .

[814]  Shigeo Kimura,et al.  Mixed convection around a heated vertical cylinder embedded in porous medium , 2005 .

[815]  V. A. Kuz’min,et al.  Radial Reactor-Heat Exchanger for Natural Gas Combustion in a Structured Porous Metal Catalyst Bed , 2005 .

[816]  Oguz Salim Sogut,et al.  Performance optimization of a solar driven heat engine with finite-rate heat transfer , 2005 .

[817]  S. Li,et al.  Analysis on the heating performance of a gas engine driven air to water heat pump based on a steady-state model , 2005 .

[818]  Zhou Huamin,et al.  Modeling and simulation of heat transfer for glass bulb mold , 2005 .

[819]  N. A. Kakutkina.  Some Stability Aspects of Gas Combustion in Porous Media , 2005 .

[820]  Armando C. Oliveira,et al.  Modeling Laminar Heat Transfer in a Curved Rectangular Duct with a Computational Fluid Dynamics Code , 2005 .

[821]  Xi Chen,et al.  Effects of natural convection on the characteristics of a long laminar argon plasma jet issuing horizontally into ambient air , 2005 .

[822]  G. Nath,et al.  Transient rotating flow over a moving surface with a magnetic field , 2005 .

[823]  Waqar A. Khan,et al.  Fluid Flow Around and Heat Transfer From an Infinite Circular Cylinder , 2005 .

[824]  Robert Eymard,et al.  Boiling in Porous Media: Model and Simulations , 2005 .

[825]  Yuri S. Muzychka,et al.  Constructal Design of Forced Convection Cooled Microchannel Heat Sinks and Heat Exchangers , 2005 .

[826]  Chongfang Ma,et al.  Theoretical study on impingement heat transfer with single-phase free-surface slot jets , 2005 .

[827]  Ioannis E. Sarris,et al.  MHD natural convection in a laterally and volumetrically heated square cavity , 2005 .

[828]  J. Richard Culham,et al.  Modeling Transient Conduction in Enclosed Regions Between Isothermal Boundaries of Arbitrary Shape , 2005 .

[829]  J. R. Camargo,et al.  An evaporative and desiccant cooling system for air conditioning in humid climates , 2005 .

[830]  Sylvain Reynaud,et al.  Hydrodynamics and heat transfer in two-dimensional minichannels , 2005 .

[831]  George Gogos,et al.  Numerical simulation of fuel droplet extinction due to forced convection , 2005 .

[832]  I. Mudawar,et al.  Flow boiling CHF in microgravity , 2005 .

[833]  Mohammad Layeghi,et al.  A Review of Concentric Annular Heat Pipes , 2005 .

[834]  Subrata Roy.  Recent Advances in Numerical Methods for Fluid Dynamics and Heat Transfer , 2005 .

[835]  Arturo Pacheco-Vega,et al.  Numerical Simulations of Heat Transfer and Fluid Flow Problems Using an Immersed-Boundary Finite-Volume Method on NonStaggered Grids , 2005 .

[836]  Abhijit Bhattacharyya,et al.  Thermal response of an on-chip assembly of RTD heaters, sputtered sample and microthermocouples , 2005 .

[837]  Richard J Goldstein,et al.  Local mass transfer measurements in an inclined enclosure at high Rayleigh number , 2005 .

[838]  Scott Backhaus,et al.  High-temperature self-circulating thermoacoustic heat exchanger , 2005 .

[839]  C. Rosas,et al.  Improvement of the cooling process of oil-immersed electrical transformers using heat pipes , 2005, IEEE Transactions on Power Delivery.

[840]  M. Mosaad,et al.  Forced convection laminar film condensation on an inclined elliptical tube in the absence of gravity , 2005 .

[841]  Masato Tagawa,et al.  Response compensation of fine-wire temperature sensors , 2005 .

[842]  Aydin Misirlioglu,et al.  Low-energy cooling of rooms with chilled ceilings and ceiling-mounted devices , 2005 .

[843]  Lars Davidson,et al.  Pressure drop and heat transfer rates in forced convection rotating square duct flows at high rotation rates , 2005 .

[844]  M. Seddeek,et al.  Finite-element method for the effects of chemical reaction, variable viscosity, thermophoresis and heat generation/absorption on a boundary-layer hydromagnetic flow with heat and mass transfer over a heat surface , 2005 .

[845]  Ratana Jiraratananon,et al.  Heat and mass transfer characteristics of a direct contact membrane distillation process for desalination , 2005 .

[846]  Hiroshi Tanaka,et al.  Indoor experiments of the vertical multiple-effect diffusion-type solar still coupled with a heat-pipe solar collector , 2005 .

[847]  Jerzy Banaszek,et al.  Modelling Columnar Dendritic Growth into an Undercooled Metallic Melt in the Presence of Convection , 2005 .

[848]  C. Schaeffer,et al.  Thermal Management for Stacked 3D Microelectronic Packages , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[849]  Yasuo Kurosaki,et al.  Radiative heat transfer in plastic welding process , 2005 .

[850]  S. Sarvari,et al.  Inverse determination of heat source distribution in conductive–radiative media with irregular geometry , 2005 .

[851]  Pedro J. Coelho,et al.  A hybrid finite volume/finite element discretization method for the solution of the radiative heat transfer equation , 2005 .

[852]  M. Golriz,et al.  Effect of annular fins on heat transfer of a horizontal immersed tube in bubbling fluidized beds , 2005 .

[853]  Yuejin Tang,et al.  Thermal analysis of a conduction-cooled HTS coil with heat disturbances , 2005 .

[854]  A. Soares,et al.  Flow and Forced Convection Heat Transfer in Crossflow of Non-Newtonian Fluids over a Circular Cylinder , 2005 .

[855]  Peter Stephan,et al.  Marangoni convection and heat transfer in thin liquid films on heated walls with topography: Experiments and numerical study , 2005 .

[856]  Josselin Garnier,et al.  Statistical approach of weakly nonlinear ablative Rayleigh–Taylor instability , 2005 .

[857]  A. Sarkar,et al.  Analysis of coupled conduction and radiation heat transfer in presence of participating medium- using a hybrid method , 2005 .

[858]  M. Rozniakowska,et al.  Influence of laser pulse shape both on temperature profile and hardened layer depth , 2005 .

[859]  M. Sivrioglu,et al.  Experimental investigation of mixed convection from an array of discrete heat sources at the bottom of a horizontal channel , 2005 .

[860]  A. J. Markvoort,et al.  Molecular dynamics study of the influence of wall-gas interactions on heat flow in nanochannels. , 2005, Physical review. E, Statistical, nonlinear, and soft matter physics.

[861]  Taku Ohara,et al.  Molecular dynamics study of thermal phenomena in an ultrathin liquid film sheared between solid surfaces: the influence of the crystal plane on energy and momentum transfer at solid-liquid interfaces. , 2005, The Journal of chemical physics.

[862]  Y. Tai,et al.  A parametrized three-dimensional model for MEMS thermal shear-stress sensors , 2005 .

[863]  Alain J. Kassab,et al.  Estimation of constant thermal conductivity by use of Proper Orthogonal Decomposition , 2005 .

[864]  Wael I. A. Aly,et al.  Flow and heat transfer characteristics of drag reducing surfactant solution in a helically coiled pipe , 2005 .

[865]  Ahmed A. Afify,et al.  Similarity analysis in magnetohydrodynamics: Hall effects on forced convective heat and mass transfer of non–Newtonian power law fluids past a semi-infinite vertical flat plate , 2005 .

[866]  S. Sanghi,et al.  Natural convection in a bottom heated horizontal cylinder , 2005 .

[867]  Shirish Raichintala,et al.  Heat exchanger switchover in a refrigeration system: Thermodynamic modeling of a reversing valve , 2005 .

[868]  T. W. Clyne,et al.  An analytical model for simulation of heat flow in plasma-sprayed thermal barrier coatings , 2005 .

[869]  Yasar Islamoglu,et al.  Finite element modeling of the effect of the ceramic coatings on heat transfer characteristics in thermal barrier applications , 2005 .

[870]  Mary A. Wells,et al.  Effect of subsurface thermocouple installation on the discrepancy of the measured thermal history and predicted surface heat flux during a quench operation , 2005 .

[871]  Binghe Ma,et al.  Thermal sensor for in situ flying height measurements of optical flying heads , 2005 .

[872]  James W. Baughn,et al.  Thermochromic Liquid Crystal Thermography: Illumination Spectral Effects. Part 2: Theory , 2005 .

[873]  Junghui Chen,et al.  Predictions of heat transfer coefficients of supercritical carbon dioxide using the overlapped type of local neural network , 2005 .

[874]  Xi-Yun Lu,et al.  Large eddy simulation of turbulent flows in a rotating concentric annular channel , 2005 .

[875]  Subrata Roy,et al.  Efficient defrosting of an inclined flat surface , 2005 .

[876]  C. Balaji,et al.  Method to improve geometry for heat transfer enhancement in PCM composite heat sinks , 2005 .

[877]  J. J. Vadasz,et al.  Heat transfer enhancement in nano-fluids suspensions: Possible mechanisms and explanations , 2005 .

[878]  David J. Kukulka.  An Evaluation of Heat Transfer Surface Materials Used in Fouling Applications , 2005 .

[879]  Manfred Groll,et al.  Visualization and mechanisms of pool boiling of propane, isobutane and their mixtures on enhanced tubes with reentrant channels , 2005 .

[880]  Koichi Nishino,et al.  Simultaneous heat transfer enhancement and pressure loss reduction for finned-tube bundles with the first or two transverse rows of built-in winglets , 2005 .

[881]  L. Gosselin,et al.  On the thermal performance of an internally finned three-dimensional cubic enclosure in natural convection , 2005 .

[882]  Jean-Christophe Batsale,et al.  Specific-heat measurement of single metallic, carbon, and ceramic fibers at very high temperature , 2005 .

[883]  Parham Sadooghi,et al.  Transient coupled radiative and conductive heat transfer in a semitransparent layer of ceramic , 2005 .

[884]  Myeong-Gie Kang.  Effects of outer tube length on saturated pool boiling heat transfer in a vertical annulus with closed bottoms , 2005 .

[885]  Wei Liu,et al.  A mathematical model to analyze heat and mass transfer characteristics of a CPL evaporator porous wick , 2005 .

[886]  Feng-Chen Li,et al.  MHD effect on flow structures and heat transfer characteristics of liquid metal–gas annular flow in a vertical pipe , 2005 .

[887]  A. Pozzi R. Tognaccini.  Influence of the Prandtl Number on the Unsteady Thermo-Fluid Dynamic Field Around a Thick Plate , 2005 .

[888]  Rong-Hua Yeh,et al.  A simple design of fins for boiling heat transfer , 2005 .

[889]  Wei-Mon Yan,et al.  Experimental study of impinging heat transfer along rib-roughened walls by using transient liquid crystal technique , 2005 .

[890]  Adrian Briggs,et al.  Condensation From Pure Steam and Steam–Air Mixtures on Integral-Fin Tubes in a Bank , 2005 .

[891]  Mahmoud Mamou,et al.  Onset of convection and finite amplitude flow due to Soret effect within a horizontal sparsely packed porous enclosure heated from below , 2005 .

[892]  Ebru Kavak Akpinar,et al.  Investigation of heat transfer and exergy loss in a concentric double pipe exchanger equipped with swirl generators , 2005 .

[893]  Weiwei Yang,et al.  Three-Dimensional Numerical Study of Natural Convective Heat Transfer of Liquid in a Cubic Enclosure , 2005 .

[894]  Shyy Woei Chang,et al.  Influence of channel height on heat transfer augmentation in rectangular channels with two opposite rib-roughened walls , 2005 .

[895]  Chi-Chang Wang,et al.  Mixed convection boundary layer flow on inclined wavy plates including the magnetic field effect , 2005 .

[896]  A. Harnoy,et al.  Feasibility Study of Unconventional Cooling of Electronic Components by Vibrating Plates at Close Proximity , 2005 .

[897]  A. G. Gerber.  Heat and mass transfer predictions of the early contact of a liquid metal on an intensely cooled moving substrate , 2005 .

[898]  Han-Taw Chen,et al.  Prediction of heat transfer coefficient on the fin inside one-tube plate finned-tube heat exchangers , 2005 .

[899]  Greg F. Naterer,et al.  Particle Image Velocimetry Based Measurement of Entropy Production With Free Convection Heat Transfer , 2005 .

[900]  Pascal Stouffs,et al.  Experimental study of heat transfer in oscillating flow , 2005 .

[901]  Jayathi Y. Murthy,et al.  A Numerical Technique for Computing Effective Thermal Conductivity of Fluid–Particle Mixtures , 2005 .

[902]  B. V. Rathish Kumar,et al.  Combined influence of mass and thermal stratification on double-diffusion non-Darcian natural convection from a wavy vertical wall to porous media , 2005 .

[903]  Hazem Ali Attia,et al.  The effect of Hall current on magnetohydrodynamic flow and heat transfer for Bingham fluids in a rectangular duct , 2005 .

[904]  Brian M. Holley,et al.  Analysis of pulsating heat pipe with capillary wick and varying channel diameter , 2005 .

[905]  B. Thonon.  Advanced and High-Performance Heat Exchangers for the Hydrocarbon-Processing Industries , 2005 .

[906]  J. Koo,et al.  Analysis of surface roughness effects on heat transfer in micro-conduits , 2005 .

[907]  Mehdi Raessi,et al.  Three-Dimensional Modelling of Density Variation Due to Phase Change in Complex Free Surface Flows , 2005 .

[908]  T. Lu,et al.  Natural convection in metal foams with open cells , 2005 .

[909]  Balram Suman,et al.  A model of the capillary limit of a micro heat pipe and prediction of the dry-out length , 2005 .

[910]  Suman Chakraborty,et al.  Heat transfer in an evaporating thin liquid film moving slowly along the walls of an inclined microchannel , 2005 .

[911]  Joachim Claesson,et al.  Correction of logarithmic mean temperature difference in a compact brazed plate evaporator assuming heat flux governed flow boiling heat transfer coefficient , 2005 .

[912]  A. Miguel,et al.  Test reference year generation from meteorological and simulated solar radiation data , 2005 .

[913]  Yongqi Liu,et al.  The effect of electrode polarity on EHD enhancement of boiling heat transfer in a vertical tube , 2005 .

[914]  Takao Kashiwagi,et al.  Experimental investigation of mass recovery adsorption refrigeration cycle , 2005 .

[915]  Stefano Lazzari,et al.  Forced and Free Flow in a Vertical Annular Duct Under Nonaxisymmetric Conditions , 2005 .

[916]  L. Vasiliev,et al.  Sorption heat pipe—a new thermal control device for space and ground application , 2005 .

[917]  Igor Bulatov.  Retrofit Optimization Framework for Compact Heat Exchangers , 2005 .

[918]  Michael E. Conner,et al.  The Effect of Support Grid Design on Azimuthal Variation in Heat Transfer Coefficient for Rod Bundles , 2005 .

[919]  Roshan Jeet Jee Jachuck,et al.  Determination of liquid–solid mass transfer coefficients for a spinning disc reactor using a limiting current technique , 2005 .

[920]  Akira Nakayama,et al.  A quasi‐three‐dimensional numerical calculation procedure for periodically fully‐developed heat and fluid flow , 2005 .

[921]  Wei Zhang,et al.  Three-dimensional numerical study of heat transfer characteristics of plain plate fin-and-tube heat exchangers from view point of field synergy principle , 2005 .

[922]  James W. Baughn,et al.  Surface flow visualization using thermal tufts produced by an encapsulated phase change material , 2005 .

[923]  Indra Vir Singh,et al.  A Numerical Study of Weight Functions, Scaling, and Penalty Parameters for Heat Transfer Applications , 2005 .

[924]  Adrian Bejan,et al.  Constructal multi-scale structures with asymmetric heat sources of finite thickness , 2005 .

[925]  Kambiz Vafai,et al.  Analysis of Flow and Heat Transfer Inside Nonisothermal Squeezed Thin Films , 2005 .

[926]  Kwang-Tzu Yang,et al.  Thermal performance of a single-row fin-and-tube heat exchanger , 2005 .

[927]  A. Yevtushenko,et al.  On Approximate Solutions of Temperature and Thermal Stresses in an Elastic Semi-Space Due to Laser Heating , 2005 .

[928]  Aliakbar Akbarzadeh,et al.  Enhancing the thermal efficiency of solar ponds by extracting heat from the gradient layer , 2005 .

[929]  David Naylor,et al.  The Effect of Coverings on Heat Transfer from a Window to a Room , 2005 .

[930]  James W. Baughn,et al.  Liquid-Crystal Thermography: Illumination Spectral Effects. Part 1—Experiments , 2005 .

[931]  Peter Vadasz,et al.  Explicit Conditions for Local Thermal Equilibrium in Porous Media Heat Conduction , 2005 .

[932]  Pradeep Bansal,et al.  Evaporating heat transfer and pressure drop of hydrocarbon refrigerants in 9.52 and 12.70 mm smooth tube , 2005 .

[933]  Hang Xu.  An explicit analytic solution for convective heat transfer in an electrically conducting fluid at a stretching surface with uniform free stream , 2005 .

[934]  Lotfollah Ghodoossi,et al.  Prediction of heat transfer characteristics in rectangular microchannels for slip flow regime and H1 boundary condition , 2005 .

[935]  David M. Christopher,et al.  Investigation of bubble-top jet flow during subcooled boiling on wires , 2005 .

[936]  Fan-bill B. Cheung,et al.  A hydrodynamic CHF model for downward facing boiling on a coated vessel , 2005 .

[937]  M. V. Krishna Murthy,et al.  Thermal Contact Conductance Across Gold-Coated OFHC Copper Contacts in Different Media , 2005 .

[938]  Isamu Fujita,et al.  Heat and mass transfer coefficients of falling-film absorption process , 2005 .

[939]  Sung Jin Kim,et al.  A Novel Methodology for Thermal Analysis of a Composite System Consisting of a Porous Medium and an Adjacent Fluid Layer , 2005 .

[940]  Edward Della Torre,et al.  Analysis of room temperature magnetic regenerative refrigeration , 2005 .

[941]  P. Bajons,et al.  Determination of stomatal conductance by means of infrared thermography , 2005 .

[942]  Horng-Wen Wu,et al.  Unsteady turbulent heat transfer of mixed convection in a reciprocating circular ribbed channel , 2005 .

[943]  Ghislain Montavon,et al.  A Two-Dimensional Heat Transfer Model for Thermal Barrier Coating Average Thermal Conductivity Computation , 2005 .

[944]  Subhash C. Mishra,et al.  Transient Conduction-Radiation Heat Transfer in Participating Media Using the Lattice Boltzmann Method and the Discrete Transfer Method , 2005 .

[945]  T. V. Morosuk,et al.  Entropy generation in conduits filled with porous medium totally and partially , 2005 .

[946]  Minh Vuong Pham,et al.  Three-Dimensional Characterization of a Pure Thermal Plume , 2005 .

[947]  J. K. Nayak,et al.  Test standards for thermosyphon-type solar domestic hot water system: review and experimental evaluation , 2005 .

[948]  Bekir Sami Yilbas,et al.  Flow impingement onto a flat plate with limited heated area in relation to laser gas assisted processing , 2005 .

[949]  Michael L. Corradini,et al.  Liquid-Metal/Water Direct Contact Heat Exchange: Flow Visualization, Flow Stability, and Heat Transfer Using Real-Time X-Ray Imaging , 2005 .

[950]  Xianting Li,et al.  Numerical analysis of outdoor thermal environment around buildings , 2005 .

[951]  Gustavo Urquiza,et al.  Prediction of temperature front in a gas turbine combustion chamber , 2005 .

[952]  Alessandro Franco,et al.  Optimum thermal design of modular compact heat exchangers structure for heat recovery steam generators , 2005 .

[953]  Wen-Bin Young,et al.  Simulation of the filling process in molding components with micro channels , 2005 .

[954]  Sheam-Chyun Lin,et al.  Experimental study of the heat sink assembly with oblique straight fins , 2005 .

[955]  Dursun Pehlivan,et al.  Effect of packing in the airflow passage on the performance of a solar air-heater with conical concentrator , 2005 .

[956]  J. L. Lin,et al.  Heat transfer analysis of charring ablators under aerodynamic heating , 2005 .

[957]  Reza Hosseini,et al.  An experimental study of heat transfer in an open-ended vertical eccentric annulus with insulated and constant heat flux boundaries , 2005 .

[958]  M. H. Al-Hajeri,et al.  Thermal performance of automotive aluminium plate radiator , 2005 .

[959]  A. Glezer,et al.  Design and Thermal Characteristics of a Synthetic Jet Ejector Heat Sink , 2005 .

[960]  Sai On Cheung,et al.  Residential building envelope heat gain and cooling energy requirements , 2005 .

[961]  Detlev G. Kröger,et al.  Influence of temperature inversions on wet-cooling tower performance , 2005 .

[962]  Ricardo Romero-Méndez,et al.  Effect of Cell Geometry on the Freezing and Melting Processes inside a Thermal Energy Storage Cell , 2005 .

[963]  Ahmed Hamza H. Ali,et al.  Characteristics of flow and heat transfer for in-line plate segments inside channel used for photovoltaic modules thermal regulation , 2005 .

[964]  Dae Hee Lee,et al.  Jet Impingement Cooling of Chips Equipped With Cylindrical Pedestal Profile Fins , 2005 .

[965]  Mohamed Ketata,et al.  A transmission line matrix (TLM) study of hyperbolic heat conduction in biological materials , 2005 .

[966]  Wei Zhang,et al.  Transient flow pattern based microscale boiling heat transfer mechanisms , 2005 .

[967]  Yulong Ding,et al.  Experimental investigation into the pool boiling heat transfer of aqueous based γ-alumina nanofluids , 2005 .

[968]  Veysel Ozceyhan,et al.  Conjugate heat transfer and thermal stress analysis of wire coil inserted tubes that are heated externally with uniform heat flux , 2005 .

[969]  T. Zhao,et al.  An experimental study of flow and heat transfer of supercritical carbon dioxide in multi-port mini channels under cooling conditions , 2005 .

[970]  Eckehard Specht,et al.  Local heat transfer in tubes after sudden change of diameter , 2005 .

[971]  Peter J. Fryer,et al.  Modelling of heat transfer, mass transfer and flavour development in chocolate crumb , 2005 .

[972]  M. Emara,et al.  Heat transfer by free convection from the inside surface of the vertical and inclined elliptic tube , 2005 .

[973]  Hee Cheon No,et al.  Improvements in Predicting Void Fraction in Subcooled Boiling , 2005 .

[974]  Tae Hyun Chun,et al.  Assessment of the RANS Turbulence Models for a Turbulent Flow and Heat Transfer in a Rod Bundle , 2005 .

[975]  Sam W. Hussey,et al.  Time and space resolved wall temperature and heat flux measurements during nucleate boiling with constant heat flux boundary conditions , 2005 .

[976]  C. Kobus,et al.  Predicting the thermal performance characteristics of staggered vertical pin fin array heat sinks under combined mode radiation and mixed convection with impinging flow , 2005 .

[977]  Ahmed Bellagi,et al.  Modelling and simulation of drying phenomena with rheological behaviour , 2005 .

[978]  Yu Zhou,et al.  Vortex interactions in a two side-by-side cylinder near-wake , 2005 .

[979]  Boming Yu,et al.  Permeability of Fractal Porous Media by Monte Carlo Simulations , 2005 .

[980]  M. K. Ghosal,et al.  Modeling and comparative thermal performance of ground air collector and earth air heat exchanger for heating of greenhouse , 2005 .

[981]  Horácio A. Vielmo,et al.  Numerical analysis of water melting and solidification in the interior of tubes , 2005 .

[982]  Liangchi Zhang,et al.  Relativistic moving heat source , 2005 .

[983]  G. Tsafnat,et al.  Modelling heating of liver tumours with heterogeneous magnetic microsphere deposition , 2005, Physics in medicine and biology.

[984]  Aibing Yu,et al.  Numerical study on the thawing process of biological tissue induced by laser irradiation. , 2005, Journal of biomechanical engineering.

[985]  D. Cahill,et al.  Nanofluids for thermal transport , 2005 .

[986]  Stefan Heinrich,et al.  Fluidized bed spray granulation: analysis of heat and mass transfers and dynamic particle populations , 2005 .

[987]  Eugenio Oñate,et al.  Particle finite element method in fluid-mechanics including thermal convection-diffusion , 2005 .

[988]  Liangchi Zhang,et al.  Relativistic heat conduction , 2005 .

[989]  Jungho Kim,et al.  Performance of Graphite Foam Evaporator for Use in Thermal Management , 2005 .

[990]  Pekka Ahtila,et al.  Thermodynamic simulation of dryer section heat recovery in paper machines , 2005 .

[991]  D. G. Walker.  Heat flux determination from measured heating rates using thermographic phosphors , 2005 .

[992]  M. L. Passos,et al.  Modeling and simulation of milk emulsion drying in spray dryers , 2005 .

[993]  Joseph Albert Mukam Fotsing,et al.  Experimental determination of the diffusion coefficients of wood in isothermal conditions , 2005 .

[994]  Asterios Pantokratoras,et al.  Forced and mixed convection boundary layer flow along a flat plate with variable viscosity and variable Prandtl number: new results , 2005 .

[995]  R. Ben-Mansour,et al.  Flow field and thermal characteristics in a model of a tangentially fired furnace under different conditions of burner tripping , 2005 .

[996]  Marek Pronobis,et al.  Influence of non-uniform flow distribution on overall heat transfer in convective bundle of circulating fluidized bed boiler , 2005 .

[997]  F. Martín-Fuertes,et al.  Comparison of film condensation models in presence of non-condensable gases implemented in a CFD Code , 2005 .

[998]  Mao-Yu Wen,et al.  Forced convection heat transfer and friction characteristics in multi-exit -rectangular package with inclined tube bundles , 2005 .

[999]  Mohammed Hasnaoui,et al.  Multiple Steady State Solutions Resulting From Coupling Between Mixed Convection And Radiation In An Inclined Channel , 2005 .

[1000]  E. Bilgen,et al.  Natural convection and conduction heat transfer in open shallow cavities with bounding walls , 2005 .

[1001]  Jean-Luc Battaglia,et al.  Tool coatings influence on the heat transfer in the tool during machining , 2005 .

[1002]  S. Krishnan,et al.  A novel hybrid heat sink using phase change materials for transient thermal management of electronics , 2005, IEEE Transactions on Components and Packaging Technologies.

[1003]  A. Bar-Cohen,et al.  Thermal design and optimization of natural convection polymer pin fin heat sinks , 2005, IEEE Transactions on Components and Packaging Technologies.

[1004]  K. N. Seetharamu,et al.  Determination of thermal compact model via evolutionary genetic optimization method , 2005, IEEE Transactions on Components and Packaging Technologies.

[1005]  H.Y. Zhang,et al.  Fluid flow and heat transfer in liquid cooled foam heat sinks for electronic packages , 2005, IEEE Transactions on Components and Packaging Technologies.

[1006]  Ayşegül Öztürk,et al.  Unsteady laminar mixed convection about a spinning sphere with a magnetic field , 2005 .

[1007]  M. Seddeek,et al.  Laminar Mixed Convection Adjacent to Vertical Continuously Stretching Sheets With Variable Viscosity and Variable Thermal Diffusivity , 2005 .

[1008]  G. Croce,et al.  Numerical simulation of roughness effect on microchannel heat transfer and pressure drop in laminar flow , 2005 .

[1009]  Jun Zhang,et al.  Modeling and numerical simulation of bioheat transfer and biomechanics in soft tissue , 2005, Math. Comput. Model..

[1010]  Tiago Domingos,et al.  New and old regimes for the endoreversible heat engine , 2005 .

[1011]  Arnaud G. Malan,et al.  Continuum thermodynamic modeling of drying capillary particulate materials via an edge-based algorithm , 2005 .

[1012]  Liyong Tong,et al.  Thermomechanically coupled sensitivity analysis and design optimization of functionally graded materials , 2005 .

[1013]  Cristina H. Amon,et al.  A novel heat transfer model and its application to information storage systems , 2005 .

[1014]  Tow Chong Chong,et al.  Numerical simulation of slider temperature rise caused by read/write current , 2005 .

[1015]  Siu Wing Or,et al.  Dynamic magnetomechanical properties of Terfenol-D/epoxy pseudo 1-3 composites , 2005 .

[1016]  Wenji Xu,et al.  A numerical simulation of temperature field in plasma-arc forming of sheet metal , 2005 .

[1017]  D. E. Dimla,et al.  Design and optimisation of conformal cooling channels in injection moulding tools , 2005 .

[1018]  M. Cholewa,et al.  Simulation of composite microregions solidification process , 2005 .

[1019]  Atsushi Sakurai,et al.  Comparison of radiation element method and discrete ordinates interpolation method applied to three-dimensional radiative heat transfer , 2005 .

[1020]  E. Chalhoub,et al.  Discrete-ordinates solution for uncoupled multi-wavelength radiative transfer problems , 2005 .

[1021]  Michalis Xenos,et al.  MHD compressible turbulent boundary-layer flow with adverse pressure gradient , 2005 .

[1022]  Khellil Sefiane,et al.  Temperature measurement near the triple line during phase change using thermochromic liquid crystal thermography , 2005 .

[1023]  Dongsheng Wen,et al.  Theoretical analyses on boiling critical heat flux with porous media , 2005 .

[1024]  Zenghui Wang,et al.  Research on heat transfer of two-phase dispersed flow in narrow annular channel , 2005 .

[1025]  Suyi Huang,et al.  Experiments and homogeneous turbulence model of boiling flowin narrow channels , 2005 .

[1026]  Ehud Yariv.  Displacing small particles by unsteady temperature fields , 2005, Journal of Fluid Mechanics.

[1027]  Jamil A. Khan,et al.  Thermal analysis of flip-chip packaged 280 nm nitride-based deep ultraviolet light-emitting diodes , 2005 .

[1028]  E. L. Tarunin,et al.  Calculation of heat transfer in Ranque–Hilcsh's vortex tube , 2005 .

[1029]  Graham F. Carey,et al.  On Marangoni effects in a heated thin fluid layer with a monolayer surfactant. Part I: model development and stability analysis , 2005 .

[1030]  S. Chungpaiboonpatana,et al.  Process and design analysis for ultrafine-pitched wiresweep elimination in advanced copper heat spreader BGA package , 2005, IEEE Transactions on Advanced Packaging.

[1031]  W. Köhler,et al.  The role of heat-conducting walls in the measurement of heat and mass transport in transient grating experiments , 2005, The European physical journal. E, Soft matter.

[1032]  Anders Rasmuson,et al.  Some aspects on gas–solid flow in a U-bend: Numerical investigation , 2005 .

[1033]  René M. Rossi,et al.  Phase Change Materials for the Improvement of Heat Protection , 2005 .

[1034]  J. A. Spim,et al.  Application of a Solidification Mathematical Model and a Genetic Algorithm in the Optimization of Strand Thermal Profile Along the Continuous Casting of Steel , 2005 .

[1035]  Mohammad H. Kargarnovin,et al.  Wall thickness optimization of thick-walled spherical vessel using thermo-elasto-plastic concept , 2005 .

[1036]  P. Novák,et al.  Influence of heat flux and surface temperature on the intergranular corrosion of stainless steel , 2005 .

[1037]  Kishalay Mitra,et al.  Mathematical Modeling and Optimization of Two-Layer Sintering Process for Sinter Quality and Fuel Efficiency Using Genetic Algorithm , 2005 .

[1038]  V. V. Kuznetsov,et al.  Modeling the Thermal Regime of a Cold-Rolling Mill with Allowance for Differences in the Cooling Conditions for the Top and Bottom Rolls , 2005 .

[1039]  Katsuhisa Noto,et al.  BUOYANT FLOW CHARACTERISTICS WITH THERMAL CYLINDERS IN STABLY STRATIFIED AIR , 2005 .

[1040]  Aytac Arikoglu,et al.  Analysis for Slip Flow Over a Single Free Disk With Heat Transfer , 2005 .

[1041]  Hong-Sen Kou,et al.  Thermal analysis of a longitudinal fin with variable thermal properties by recursive formulation , 2005 .

[1042]  José Fernández-Seara,et al.  Experimental apparatus for measuring heat transfer coefficients by the Wilson plot method , 2005 .

[1043]  Hans Müller-Steinhagen,et al.  Pool Boiling Heat Transfer to Phosphoric Acid Solutions , 2005 .

[1044]  Mousa M. Mohamed.  Solidification of phase change material on vertical cylindrical surface in holdup air bubbles , 2005 .

[1045]  Soon Heung Chang,et al.  CHF characteristics of R-134a flowing upward in uniformly heated vertical tube , 2005 .

[1046]  Yasar Islamoglu,et al.  Modeling of Thermal Performance of a Cooling Tower Using an Artificial Neural Network , 2005 .

[1047]  Martine Baelmans,et al.  CFD model of the airflow, heat and mass transfer in cool stores , 2005 .

[1048]  Jacques Padet,et al.  Parametric study of unsteady forced convection with pressure gradient , 2005 .

[1049]  John P. Loui,et al.  Heat transfer simulation in drag–pick cutting of rocks , 2005 .

[1050]  Sumanta Acharya,et al.  Experimental Investigation of Flow Structure and Nusselt Number in a Low-Speed Linear Blade Passage With and Without Leading-Edge Fillets , 2005 .

[1051]  Witold M. Lewandowski,et al.  Free Convective Heat Transfer Structures as a Function of the Width of Isothermal Horizontal Rectangular Plates , 2005 .

[1052]  Jing Liu,et al.  Numerical Study on a Cooling Strategy for Boiling, Saline-Based Tumor Hyperthermic Injector , 2005 .

[1053]  S. V. Puzach,et al.  Features of the Heat and Mass Transfer in a Fire Within a Building of Complex Geometry , 2005 .

[1054]  M. Vázquez,et al.  Effects of ridged walls on the heat transfer in a heated square duct , 2005 .

[1055]  Oguz Uzol,et al.  Heat Transfer, Pressure Loss and Flow Field Measurements Downstream of Staggered Two-Row Circular and Elliptical Pin Fin Arrays , 2005 .

[1056]  B. Goyeau,et al.  Convective heat and solute transfer in partially porous cavities , 2005 .

[1057]  David G. Bogard,et al.  Turbulent Transport in Film Cooling Flows , 2005 .

[1058]  S. B. Kim,et al.  Visualization of boiling phenomena in inclined rectangular gap , 2005 .

[1059]  R. K. Sinha,et al.  Theoretical studies on thermal stratification in a side heated cavity , 2005 .

[1060]  Ravi Kumar,et al.  Condensation of R-134a vapour over single horizontal integral-fin tubes: effect of fin height , 2005 .

[1061]  Kamel Hooman,et al.  Laminar dissipative flow in a porous channel bounded by isothermal parallel plates , 2005 .

[1062]  Takao Kashiwagi,et al.  Performance evaluation of a two-stage adsorption refrigeration cycle with different mass ratio , 2005 .

[1063]  Wongee Chun,et al.  A Numerical Study of the Thermal Entrance Effect in Miniature Thermal Conductivity Detectors , 2005 .

[1064]  Pradeep Bansal,et al.  Heat and mass transfer characteristics of a helical absorber using LiBr and LiBr + LiI + LiNO3 + LiCl solutions , 2005 .

[1065]  Dong-Keun Yang,et al.  Modeling of frosting behavior on a cold plate , 2005 .

[1066]  Cao Liqun,et al.  A reiterated two‐scale probabilistic modeling and numerical simulation for heat equation in a fractal porous media , 2005 .

[1067]  N. P. Zhukov.  Simulation of the Heat Transfer from a Linear Pulsed-Heat Source in Thermophysical Measurements , 2005 .

[1068]  Manfred Groll,et al.  Pool boiling heat transfer of propane, isobutane and their mixtures on enhanced tubes with reentrant channels , 2005 .

[1069]  Y. Shin,et al.  Heat transfer model of semi-transparent ceramics undergoing laser-assisted machining , 2005 .

[1070]  Omar Jbara,et al.  X-ray radiography applied to an investigation of thermal diffusion , 2005 .

[1071]  Wenchang Tan,et al.  Stokes’ first problem for a second grade fluid in a porous half-space with heated boundary , 2005 .

[1072]  Wen Ruey Chen.  Transient natural convection of micropolar fluids between concentric and vertically eccentric spheres , 2005 .

[1073]  James K. Carson,et al.  Thermal conductivity bounds for isotropic, porous materials , 2005 .

[1074]  Demos P. Georgiou,et al.  1D heat transfer through a flat plate submitted to step changes in heat transfer coefficient , 2005 .

[1075]  Petter Andreas Berthelsen,et al.  Calculations of stratified wavy two-phase flow in pipes , 2005 .

[1076]  I. Liu,et al.  Flow and heat transfer of an electrically conducting fluid of second grade in a porous medium over a stretching sheet subject to a transverse magnetic field , 2005 .

[1077]  Lingen Chen,et al.  Thermodynamic simulation of performance of an Otto cycle with heat transfer and variable specific heats of working fluid , 2005 .

[1078]  R. F. Kelbaliev,et al.  Investigation of Characteristic Features of Critical Heat Transfer under Conditions of Boiling of Subcooled Hydrocarbons in a Close-to-Critical Pressure Range , 2005 .

[1079]  B. Suman,et al.  Effect of variations in thermophysical properties and design parameters on the performance of a V-shaped micro grooved heat pipe , 2005 .

[1080]  P. Tzeng,et al.  DIRECT-SIMULATION MONTE CARLO MODELING ON TWO-DIMENSIONAL RAYLEIGH-BÉNARD INSTABILITIES OF RAREFIED GAS , 2005 .

[1081]  Antonio Barletta,et al.  On the existence of parallel flow for mixed convection in an inclined duct , 2005 .

[1082]  Cristina H. Amon,et al.  Remarkable improvement of the Lévêque solution for isoflux heating with a combination of the transversal method of lines (TMOL) and a computer-extended Fröbenius power series , 2005 .

[1083]  K. W. Tou,et al.  Study of transient forced convection heat transfer from discrete heat sources in a FC-72 cooled vertical channel , 2005 .

[1084]  Detlev G. Kröger,et al.  Refinement of the Transfer Characteristic Correlation of Wet-Cooling Tower Fills , 2005 .

[1085]  A. A. Wragg,et al.  Free convective mass transfer at circular thin disk electrodes with varying inclination , 2005 .

[1086]  Dongsoo Jung,et al.  Nucleate boiling heat transfer coefficients of flammable refrigerants on various enhanced tubes , 2005 .

[1087]  Bernardo Buonomo,et al.  NUMERICAL STUDY OF NATURAL CONVECTION IN VERTICAL CHANNELS WITH ADIABATIC EXTENSIONS DOWNSTREAM , 2005 .

[1088]  Alberto Coronas,et al.  Absorption of water vapour in the falling film of water–(LiBr + LiI + LiNO3 + LiCl) in a vertical tube at air-cooling thermal conditions , 2005 .

[1089]  Liwu Liu,et al.  Finite element solution of radiative transfer across a slab with variable spatial refractive index , 2005 .

[1090]  Dong-Ho Lee,et al.  CONTROL OF VORTEX SHEDDING BEHIND A RECTANGULAR CYLINDER NEAR THE GROUND , 2005 .

[1091]  Weizhong Dai,et al.  Comparison of the solutions of a phase-lagging heat transport equation and damped wave equation , 2005 .

[1092]  Motoo Fujii,et al.  Experimental study on CPU cooling system of closed‐loop two‐phase thermosyphon , 2005 .

[1093]  S. G. Obukhov,et al.  Influence of the Operating Time of a Surface Heated by Electric Current on the Heat-Transfer Coefficient of Kerosene and Water Boiling on It , 2005 .

[1094]  Vitor A. F. Costa,et al.  Thermodynamics of natural convection in enclosures with viscous dissipation , 2005 .

[1095]  D. A. Nesterov,et al.  The Effect of Radiative-Convective Heat Transfer on the Formation of Current Layer , 2005 .

[1096]  Huiying Wu,et al.  Condensation flow patterns in silicon microchannels , 2005 .

[1097]  V. M. Ushakov,et al.  Numerical Investigation of the Heat Exchange and Firing of Reactive Channel Walls by a High-Temperature Swirling-Gas Flow , 2005 .

[1098]  Daming Xu,et al.  Heat, mass and momentum transport behaviors in directionally solidifying blade-like castings in different electromagnetic fields described using a continuum model , 2005 .

[1099]  Je-Chin Han,et al.  Film-Cooling Effectiveness on a Gas Turbine Blade Tip Using Pressure-Sensitive Paint , 2005 .

[1100]  Claudio Cianfrini,et al.  Natural convection in tilted square cavities with differentially heated opposite walls , 2005 .

[1101]  Wei-Mon Yan,et al.  Mixed convection heat transfer enhancement through film evaporation in inclined square ducts , 2005 .

[1102]  Joanna Wilk,et al.  Average temperature of the rotor of high-speed rotating heat exchanger during the period of thermal start-up , 2005 .

[1103]  O. O. Mil’man,et al.  Visualization of Flow under Conditions of Natural Circulation in Heated Pipes , 2005 .

[1104]  K. Prasad,et al.  Buoyancy force and thermal radiation effects in MHD boundary layer visco-elastic fluid flow over continuously moving stretching surface , 2005 .

[1105]  D. N. Andrianov,et al.  Calculation of the Characteristics of Transfer of Thermal Radiation in the Workspace of an Annular Furnace , 2005 .

[1106]  Tassos G. Karayiannis,et al.  An investigation of a novel cooling system for chilled food display cabinets , 2005 .

[1107]  Dennis L. O'Neal,et al.  Effect of Refrigerant Flow Control on the Heating Performance of a Variable-Speed Heat Pump Operating at Low Outdoor Temperature , 2005 .

[1108]  Farooq Saeed,et al.  Numerical Heat Transfer Correlation for Array of Hot-Air Jets Impinging on 3-Dimensional Concave Surface , 2005 .

[1109]  Abdul Khaliq,et al.  Finite-time heat-transfer analysis and ecological optimization of an endoreversible and regenerative gas-turbine power-cycle , 2005 .

[1110]  Leonid I. Zaichik,et al.  The effect of turbulence on spontaneously condensing wet-steam flow , 2005 .

[1111]  Jack Legrand,et al.  Determination of heterogeneities in a scraped surface heat exchanger using electrochemical sensors , 2005 .

[1112]  Sheng-Chung Tzeng,et al.  Mixed convective heat-transfers in a porous channel with sintered copper beads , 2005 .

[1113]  José Teixeira Freire,et al.  Analysis of the Heat Transfer in a Packed Bed with Cocurrent Gas-Liquid Upflow , 2005 .

[1114]  V. N. Babak.  Simultaneous Heat and Momentum Transfer in Two-Phase Systems at Low Pressure and High Temperature: Vapor Phase , 2005 .

[1115]  Ferruh Erdogdu,et al.  Mathematical approaches for use of analytical solutions in experimental determination of heat and mass transfer parameters , 2005 .

[1116]  L. P. Kholpanov,et al.  Heat Transfer Complicated by Phase Transitions in a Moving Layer , 2005 .

[1117]  B. M. Burnside,et al.  HEAT TRANSFER IN FLOW BOILING OVER A BUNDLE OF HORIZONTAL TUBES , 2005 .

[1118]  Vladimir M. Aroutiounian,et al.  Metal oxide photoelectrodes for hydrogen generation using solar radiation-driven water splitting , 2005 .

[1119]  A. Oubarra,et al.  Analytical solution to the problem of heat transfer in an MHD flow inside a channel with prescribed sinusoidal wall heat flux , 2005 .

[1120]  Fengrui Sun,et al.  Irreversible absorption heat-pump and its optimal performance , 2005 .

[1121]  Jonas Berghel.  The Gas-to-Particle Heat Transfer and Hydrodynamics in Spouted Bed Drying of Sawdust , 2005 .

[1122]  R. E. Critoph.  Modular regenerative adsorption cycles with fixed beds, applied to trigeneration , 2005 .

[1123]  Asterios Pantokratoras,et al.  Unidirectional transport of heat and salt in free convection of water with variable physical properties along a vertical plate with uniform temperature and salinity , 2005 .

[1124]  V. S. Sidorov,et al.  Mathematical modeling and experimental investigation of the effect of temperature gradients on crystallization processes under terrestrial and space conditions , 2005 .

[1125]  C Riverol,et al.  Estimation of fouling in a plate heat exchanger through the application of neural networks , 2005 .

[1126]  Lei Wang,et al.  Large eddy simulation of stably stratified turbulent open channel flows with low- to high-Prandtl number , 2005 .

[1127]  Borut Mavko,et al.  Calculation of conjugate heat transfer problem with volumetric heat generation using the Galerkin method , 2005 .

[1128]  Michel Gradeck,et al.  Local analysis of heat transfer inside corrugated channel , 2005 .

[1129]  A. Melling,et al.  Apparatus for investigation of evaporation at free liquid–vapour interfaces , 2005 .

[1130]  L. Lidgren,et al.  Modeling of the heat distribution in the intervertebral disk. , 2005, Ultrasound in medicine & biology.

[1131]  Muhsin Kilic,et al.  An investigation of thermal comfort inside an automobile during the heating period. , 2005, Applied ergonomics.

[1132]  R. Banerjee,et al.  Three-dimensional numerical analysis of convection and conduction cooling of spherical biocrystals with localized heating from synchrotron X-ray beams. , 2005, Journal of synchrotron radiation.

[1133]  R. Coger,et al.  Heat and Mass Transfer during the Cryopreservation of a Bioartificial Liver Device: A Computational Model , 2005, ASAIO journal.

[1134]  Benoît Haut,et al.  Surface-tension-driven instabilities of a pure liquid layer evaporating into an inert gas. , 2005, Journal of colloid and interface science.

[1135]  Kuo-Chi Liu,et al.  Numerical solutions for the hyperbolic heat conduction problems in a layered solid cylinder with radiation surface , 2005, Appl. Math. Comput..

[1136]  Jun Zhang,et al.  A numerical study of a 3D bioheat transfer problem with different spatial heating , 2005, Math. Comput. Simul..

[1137]  Yu Gu,et al.  An efficient diffusion approximation for 3D radiative transfer parameterization: application to cloudy atmospheres , 2005 .

[1138]  Noha Hassan,et al.  A Heat Transfer Analysis of the Fiber Placement Composite Manufacturing Process , 2005 .

[1139]  Kambiz Vafai,et al.  Heat transfer enhancement through control of thermal dispersion effects , 2005 .

[1140]  Wenzhi Cui,et al.  Heat transfer augmentation in 3D internally finned and microfinned helical tube , 2005 .

[1141]  N. Lior,et al.  Impingement Heat Transfer: Correlations and Numerical Modeling , 2005 .

[1142]  L. Martínez,et al.  Numerical integration of the discrete-ordinate radiative transfer equation in strongly non-homogeneous media , 2005, Appl. Math. Comput..

[1143]  Lynn F. Gladden,et al.  Rapid measurement of dispersion and velocity in freezing drops using magnetic resonance methods , 2005 .

[1144]  Jan G. Korvink,et al.  Connecting heat transfer macromodels for array MEMS structures , 2005 .

[1145]  Wojciech Lipiński,et al.  TRANSIENT RADIATION HEAT TRANSFER WITHIN A NONGRAY NONISOTHERMAL ABSORBING-EMITTING-SCATTERING SUSPENSION OF REACTING PARTICLES UNDERGOING SHRINKAGE , 2005 .

[1146]  Vladimir Ginkin,et al.  MATHEMATICAL MODEL OF HEAT AND MASS TRANSFER DURING CRYSTAL GROWTH PROCESS INCLUDING CLUSTER MODEL OF A MELT CONSTITUTION , 2005 .

[1147]  S. P. Lin,et al.  Enhancement or suppression of instability in a two-layered liquid film flow , 2005 .

[1148]  Daan M. Maijer,et al.  Quantification of temperature, stress, and strain fields during the start-up phase of direct chill casting process by using a 3D fully coupled thermal and stress model for AA5182 ingots , 2005 .

[1149]  Carlos Alexandre dos Santos,et al.  Factors affecting solidification thermal variables along the cross-section of horizontal cylindrical ingots , 2005 .

[1150]  D. T. Gawne,et al.  Non-steady state heating of substrate and coating during thermal-spray deposition , 2005 .

[1151]  B. Ai,et al.  Heat flow and efficiency in a microscopic engine , 2005, physics/0504118.

[1152]  Andrew T. Jessup,et al.  High-resolution airborne infrared measurements of ocean skin temperature , 2005, IEEE Geoscience and Remote Sensing Letters.

[1153]  S. Ben Nasrallah,et al.  Control volume finite element method for radiation , 2005 .

[1154]  Zhang Jingyu,et al.  The interior heat transfer characteristics of gas turbine blade due to sparse film cooling holes , 2005 .

[1155]  Hiroyuki Ozoe,et al.  Aerial flow in a vertical cylindrical container with thermal gradient under a vertical magnetic field , 2005 .

[1156]  Jerzy Banaszek,et al.  Some new computational models of radiative heat transfer in participating media , 2005 .

[1157]  Janusz S. Szmyd,et al.  Turbulent heat transfer in a confined jet , 2005 .

[1158]  Bengt Sundén,et al.  Performance of a pressure-based unstructured code and a multi-block structured code for heat transfer and fluid flow , 2005 .

[1159]  Laiqin Luo,et al.  DSMC simulation of low-speed gas flow and heat transfer in 2D rectangular micro-channel , 2005 .

[1160]  Jae Min Hyun,et al.  Buoyant convection of a variable-viscosity fluid in an enclosure with discrete protruding heaters , 2005 .

[1161]  G. P. Peterson,et al.  RAPID TRANSIENT HEAT CONDUCTION IN MULTILAYER MATERIALS WITH PULSED HEATING BOUNDARY , 2005 .

[1162]  Janusz S. Szmyd,et al.  Numerical analysis for air convection in a vertical cylinder heated and cooled from a side wall under a strong magnetic field , 2005 .

[1163]  Toshio Tagawa,et al.  CONJUGATE NUMERICAL COMPUTATION FOR THE NATURAL CONVECTION OF LIQUID METAL HEATED FROM BELOW , 2005 .

[1164]  Wang Chunyu,et al.  Heat Transfer and Pressure Drop of Vapor-Liquid-Solid Three-Phase Boiling Flow of Binary Mixtures , 2005 .

[1165]  T. DebRoy,et al.  Heat transfer and fluid flow in laser microwelding , 2005 .

[1166]  Yulong Ding,et al.  Effect of particle migration on heat transfer in suspensions of nanoparticles flowing through minichannels , 2005 .

[1167]  Bo Liu,et al.  Thermal study of nanometer spaced head-disk systems , 2005, INTERMAG Asia 2005. Digests of the IEEE International Magnetics Conference, 2005..

[1168]  R. Kamondetdacha,et al.  MRI safety: RF-induced heating near straight wires , 2005, IEEE Transactions on Magnetics.

[1169]  Ching-Jenq Ho,et al.  Thermally developing forced convection for PCM suspensions in a circular duct , 2005 .

[1170]  Joseph Absi,et al.  Thermal response of two-layer systems: Numerical simulation and experimental validation , 2005 .

[1171]  Xiang Ling,et al.  Numerical Simulation of Saturation Behavior of Physical Properties in Composites with Randomly Distributed Second-phase , 2005 .

[1172]  Miroslav Raudensky,et al.  Secondary cooling in continuous casting and Leidenfrost temperature effects , 2005 .

[1173]  Jane H. Davidson,et al.  Mechanical analysis of streamlined tubes with non-uniform wall thickness for heat exchangers , 2005 .

[1174]  Roydon Andrew Fraser,et al.  Conjugate heat transfer inside a porous channel , 2005 .

[1175]  Maksim A. Pakhomov,et al.  The thermal efficiency of near-wall gas-droplets screens. Part I. Numerical modeling , 2005 .

[1176]  A Bassam,et al.  Fin placement for optimal forced convection heat transfer from a cylinder in cross‐flow , 2005 .

[1177]  Prashanta Dutta,et al.  Internal cooling augmentation in rectangular channel using two inclined baffles , 2005 .

[1178]  Hassan Gomaa,et al.  Effect of oscillatory motion on heat transfer at vertical flat surfaces , 2005 .

[1179]  Je-Chin Han,et al.  Jet-impingement heat transfer in rotating channels with staggered extraction flow , 2005 .

[1180]  S. Acharya,et al.  Flow and Heat Transfer in an Internally Ribbed Duct With Rotation: An Assessment of Large Eddy Simulations and Unsteady Reynolds-Averaged Navier-Stokes Simulations , 2005 .

[1181]  Dominique Baillis,et al.  Radiative Characteristics of Beds of Spheres Containing an Absorbing and Scattering Medium , 2005 .

[1182]  Stéphane Clain,et al.  Local heat transfer of compressible fluid in porous media: application to the HBC fuse , 2005 .

[1183]  Balram Suman,et al.  Transient modeling of micro-grooved heat pipe , 2005 .

[1184]  Igor V. Shevchuk.  A new type of the boundary condition allowing analytical solution of the thermal boundary layer equation , 2005 .

[1185]  M. Golriz,et al.  Radiation heat transfer in circulating fluidized bed combustors , 2005 .

[1186]  Benoît Oesterlé,et al.  On heat transfer in gas–solid pipe flows: Effects of collision induced alterations of the flow dynamics , 2005 .

[1187]  Ioan Pop,et al.  Free convection in a wavy cavity filled with a porous medium , 2005 .

[1188]  Francisco Alhama,et al.  Discriminated dimensional analysis of the energy equation: Application to laminar forced convection along a flat plate , 2005 .

[1189]  Moh’d A. Al-Nimr,et al.  Effect of the local acceleration term on the MHD transient free convection flow over a vertical plate , 2005 .

[1190]  Ching-Yu Yang,et al.  Direct and Inverse Solutions of Hyperbolic Heat Conduction Problems , 2005 .

[1191]  Shigeo Kida,et al.  Excitation of polar thermal convection in a rotating spherical shell , 2005 .

[1192]  A. Bejan,et al.  Distribution of heat sources in vertical open channels with natural convection , 2005 .

[1193]  V. Terekhov,et al.  Thermal efficiency of near-wall gas-droplet screens. II. Experimental study and comparison with numerical results , 2005 .

[1194]  James W. Baughn,et al.  A new technique for dynamic heat transfer measurements and flow visualization using liquid crystal thermography , 2005 .

[1195]  Je-Chin Han,et al.  Influence of Entrance Geometry on Heat Transfer in Rotating Rectangular Cooling Channels (AR=4:1) With Angled Ribs , 2005 .

[1196]  Tse-Fou Zien.  Integral Solutions of Droplet Freezing Problems in Hypersonic Melting Ablation , 2005 .

[1197]  Lilia Ahrné,et al.  Flow and heat transfer from multiple slot air jets impinging on circular cylinders , 2005 .

[1198]  Joseph Khedari,et al.  Heat gain reduction by means of thermoelectric roof solar collector , 2005 .

[1199]  Gary D. Lock,et al.  Transient heat transfer measurements using thermochromic liquid crystal: lateral-conduction error , 2005 .

[1200]  Pongjet Promvonge,et al.  Enhancement of heat transfer in a tube with regularly-spaced helical tape swirl generators , 2005 .

[1201]  Portonovo S. Ayyaswamy,et al.  Loop heat pipe for spacecraft thermal control, part 2 : Ambient condition tests , 2005 .

[1202]  Wei-Mon Yan,et al.  Laminar mixed convection heat and mass transfer in vertical rectangular ducts with film evaporation and condensation , 2005 .

[1203]  Joseph Khedari,et al.  Development of a new solar thermal engine system for circulating water for aeration , 2005 .

[1204]  Vinod Narayanan,et al.  Spatially Resolved Heat Transfer Rates in an Impinging Circular Microscale Jet , 2005 .

[1205]  Munther M. Salim,et al.  Post-CHF Axial- and Swirl-Flow Heat Transfer in Small Horizontal Tubes. , 2005 .

[1206]  S. Ben Nasrallah,et al.  Buoyancy effects on mixed convection heat and mass transfer in a duct with sudden expansions , 2005 .

[1207]  V. Dharma Rao,et al.  A combined approach to predict friction coefficients and convective heat transfer characteristics in A tube with twisted tape inserts for a wide range of Re and Pr , 2005 .

[1208]  Min-Hsing Chang,et al.  A decomposition solution for fins with temperature dependent surface heat flux , 2005 .

[1209]  Janusz S. Szmyd,et al.  Three-dimensional numerical computation for magnetic convection of air inside a cylinder heated and cooled isothermally from a side wall , 2005 .

[1210]  K. W. Tou,et al.  Experimental study of transient natural convection heat transfer from simulated electronic chips , 2005 .

[1211]  Terry Lucas,et al.  Effect of Input Variability on the Performance of Turbine Blade Thermal Design Using Monte Carlo Simulation: An Exploratory Study , 2005 .

[1212]  Sreenivas Jayanti,et al.  Calculation of dry out and post-dry out heat transfer in rod bundles using a three field model , 2005 .

[1213]  John G. Stevens,et al.  Heat transport in Stokes' problem with melting: a two-layer approach , 2005 .

[1214]  S. C. Kaushik,et al.  Maximum power density analyses for an irreversible radiative heat engine , 2005 .

[1215]  Majed Almogbel,et al.  Constructal tree-shaped fins , 2005 .

[1216]  Suyi Huang,et al.  Convection heat and mass transfer from a disk , 2005 .

[1217]  Tsung-Chien Chen,et al.  Adaptive-Weighting Input-Estimation Approach to Nonlinear Inverse Heat-Conduction Problems , 2005 .

[1218]  Raj M. Manglik,et al.  Low Reynolds number forced convection in three-dimensional wavy-plate-fin compact channels: fin density effects , 2005 .

[1219]  Edward Ng,et al.  Effect of envelope colour and thermal mass on indoor temperatures in hot humid climate , 2005 .

[1220]  M. Angioletti,et al.  CFD turbulent modelling of jet impingement and its validation by particle image velocimetry and mass transfer measurements , 2005 .

[1221]  Somchai Wongwises,et al.  A study of the heat transfer characteristics of a compact spiral coil heat exchanger under wet-surface conditions , 2005 .

[1222]  L. C. Kwok,et al.  Heat transfer characteristics of an array of impinging pre-mixed slot flame jets , 2005 .

[1223]  A. Bontemps,et al.  Vertical flow boiling of refrigerant R134a in small channels , 2005 .

[1224]  Ting Wang,et al.  Effect of Elevated Free-Stream Turbulence on Transitional Flow Heat Transfer Over Dual-Scaled Rough Surfaces , 2005 .

[1225]  Mohammad Faghri,et al.  Computational Analysis of Heat Transfer Enhancement in Square Ducts With V-Shaped Ribs: Turbine Blade Cooling , 2005 .

[1226]  R. Shah,et al.  Modeling and effect of leakages on heat transfer performance of fixed matrix regenerators , 2005 .

[1227]  Peter T. Ireland,et al.  The Effect of Initial Cross Flow on the Cooling Performance of a Narrow Impingement Channel , 2005 .

[1228]  Yunhua Gan,et al.  Microscale heat transfer enhancement using thermal boundary layer redeveloping concept , 2005 .

[1229]  L. Chen,et al.  Compromise optimization between heating load and entropy production rate for endoreversible absorption heat pumps , 2005 .

[1230]  Dwight C. Look,et al.  Corrections Based On Two-Dimensional Fin Analysis of Tip Conditions , 2005 .

[1231]  Mohamed Naceur Borjini,et al.  Modelization of combined radiative and conductive heat transfer in three‐dimensional complex enclosures , 2005 .

[1232]  W. Schneider,et al.  Lift, thrust and heat transfer due to mixed convection flow past a horizontal plate of finite length , 2005, Journal of Fluid Mechanics.

[1233]  Khalil Khanafer,et al.  Computational modeling of transport phenomena in chemical vapor deposition , 2005 .

[1234]  Shripad T. Revankar,et al.  Laminar film condensation in a vertical tube in the presence of noncondensable gas , 2005 .

[1235]  Sujit Kumar Khan,et al.  Viscoelastic boundary layer flow and heat transfer over an exponential stretching sheet , 2005 .

[1236]  J. Bouslimi,et al.  Experimental investigation of the thermal field of a turbulent plume guided by a cylinder – preliminary results , 2005 .

[1237]  M. Mohammed Shah,et al.  Improved General Correlation for Subcooled Boiling Heat Transfer During Flow Across Tubes and Tube Bundles , 2005 .

[1238]  Sergei Sazhin,et al.  Droplet vaporization model in the presence of thermal radiation , 2005 .

[1239]  Chakravarthy Balaji,et al.  Mixed convection heat transfer from a horizontal channel with protruding heat sources , 2005 .

[1240]  Takeshi Miyanaga,et al.  Mist Transpiration Cooling System Using Open-Cellular Porous Materials. , 2005 .

[1241]  Dibakar Rakshit,et al.  Thermodynamic optimization of conjugate convection from a finned channel using genetic algorithms , 2005 .

[1242]  Bart Merci,et al.  Experimental and numerical study of turbulent heat transfer on a cylindrical pedestal , 2005 .

[1243]  Mehmet Kanoglu,et al.  Computational model for a ground coupled space cooling system with an underground energy storage tank , 2005 .

[1244]  C. W. Pope,et al.  Flow and heat-transfer in an internally-heated, naturally-ventilated space , 2005 .

[1245]  Mikio Sato,et al.  Conceptual Design and Cooling Blade Development of 1700°C Class High-Temperature Gas Turbine , 2005 .

[1246]  Xudong Zhao,et al.  Developing a theoretical model to investigate thermal performance of a thin membrane heat-pipe solar collector , 2005 .

[1247]  Anthony M. Jacobi,et al.  Impact of leading edge delta-wing vortex generators on the thermal performance of a flat tube, louvered-fin compact heat exchanger , 2005 .

[1248]  Francesco Minichiello,et al.  HVAC dehumidification systems for thermal comfort: a critical review , 2005 .

[1249]  Ruzhu Wang,et al.  Comparison of heating and natural ventilation in a solar house induced by two roof solar collectors , 2005 .

[1250]  S. C. Kaushik,et al.  Ecological optimisation of an irreversible regenerative intercooled Brayton heat engine with direct heat loss , 2005 .

[1251]  Ronald Scott Bunker,et al.  A review of shaped hole turbine film-cooling technology , 2005 .

[1252]  Xudong Zhao,et al.  Numerical and experimental investigation of the operating characteristics of a “wickless” heat pipe , 2005 .

[1253]  Tzu-Chen Hung,et al.  Thermal analysis and optimization for a ball grid array package , 2005 .

[1254]  Michael Wilson,et al.  Heat transfer measurements using liquid crystals in a preswirl rotating-disk system , 2005 .

[1255]  Igor Pioro,et al.  Experimental heat transfer of supercritical carbon dioxide flowing inside channels (survey) , 2005 .

[1256]  Abd. Rahim Abu Talib,et al.  Detailed Investigation of Heat Flux Measurements Made in a Standard Propane-Air Fire-Certification Burner Compared to Levels Derived From a Low-Temperature Analog Burner , 2005 .

[1257]  Mirko Komatina,et al.  Experimental and numerical investigation of heat exchanger built in solid fuel household furnace of an original concept , 2005 .

[1258]  Ishak Abdul Azid,et al.  Optimization of fins used in electronic packaging , 2005 .

[1259]  Jan Kosny,et al.  Three-dimensional conduction z-transfer function coefficients determined from the response factors , 2005 .

[1260]  Richard Karl Strand,et al.  Modeling radiant heating and cooling systems: integration with a whole-building simulation program , 2005 .

[1261]  M. Rajan,et al.  Heat transfer from a totally blocked fuel subassembly of a liquid metal fast breeder reactor: Part I. Experimental investigation , 2005 .

[1262]  Thirumalachari Sundararajan,et al.  Heat transfer from a totally blocked fuel subassembly of a liquid metal fast breeder reactor: II. Numerical simulation , 2005 .

[1263]  Syou Maki,et al.  Natural convection of a paramagnetic liquid controlled by magnetization force , 2005 .

[1264]  Fengrui Sun,et al.  The ecological optimization of a generalized irreversible Carnot heat pump for a generalized heat transfer law , 2005 .

[1265]  Pascal Bevilacqua,et al.  Thermal measurement equipment for magnetic components , 2005 .

[1266]  A. Elgafy,et al.  Numerical Study for Enhancing the Thermal Conductivity of Phase Change Material (PCM) Storage using High Thermal Conductivity Porous Matrix , 2005 .

[1267]  S. Hou,et al.  Influence of oblique angle and heating height on flame structure, temperature field and efficiency of an impinging laminar jet flame , 2005 .

[1268]  V. A. Tsykanov,et al.  Upgrading the Design of Cruciform Fuel Elements to Increase their Heat-Engineering Characteristics , 2005 .

[1269]  M. K. Lei,et al.  Numerical analysis of ablated behaviors on titanium irradiated by high-intensity pulsed ion beam , 2005 .

[1270]  Ahmet Z. Sahin,et al.  Maintaining uniform surface temperature along pipes by insulation , 2005 .

[1271]  M. H. Al-Hajeri,et al.  Fluid flow and heat transfer investigations in shell and dimple heat exchangers , 2005 .

[1272]  Ramasamy Venkatesan,et al.  Evaluation of sodium hypochlorite for fouling control in plate heat exchangers for seawater application , 2005 .

[1273]  Stuart Licht,et al.  Solar water splitting to generate hydrogen fuel—a photothermal electrochemical analysis , 2005 .

[1274]  Daniel L. Feltham,et al.  Multiple stationary solutions of an irradiated slab , 2005 .

[1275]  Jyeshtharaj B. Joshi,et al.  CFD simulation of steady state heat transfer in bubble columns , 2005 .

[1276]  Chris J. Bromley,et al.  Measurement of heat flux from steaming ground , 2005 .

[1277]  Paul A. Durbin,et al.  Unsteady Effects on Trailing Edge Cooling , 2005 .

[1278]  Takashi Kashiwagi,et al.  Effects of sample orientation on nonpiloted ignition of thin poly(methyl methacrylate) sheet by a laser. 1. Theoretical prediction , 2005 .

[1279]  K. Kiger,et al.  Single nozzle spray cooling heat transfer mechanisms , 2005 .

[1280]  Albert Mosyak,et al.  Explosive boiling of water in parallel micro-channels , 2005 .

[1281]  Hakan F. Oztop,et al.  Natural convection heat transfer in partially open inclined square cavities , 2005 .

[1282]  Borut Zupančič,et al.  The influence of the space between the billets on the productivity of a continuous walking-beam furnace , 2005 .

[1283]  Eing-Jer Wei,et al.  Numerical analysis of two dimensional pin fins with non-constant base heat flux , 2005 .

[1284]  F. J. Cunha,et al.  Cooling the Tip of a Turbine Blade Using Pressure Side Holes—Part II: Heat Transfer Measurements , 2005 .

[1285]  Karen A. Thole,et al.  Cooling the Tip of a Turbine Blade Using Pressure Side Holes—Part I: Adiabatic Effectiveness Measurements , 2005 .

[1286]  J. Murthy,et al.  Numerical simulation for heat transfer in prostate cancer cryosurgery. , 2005, Journal of biomechanical engineering.

[1287]  Lubin G. Vulkov,et al.  Stability of difference schemes for parabolic equations with dynamical boundary conditions and conditions on conjugation , 2005, Appl. Math. Comput..

[1288]  Hazem Ali Attia.  Numerical study of flow and heat transfer of a non-Newtonian fluid on a rotating porous disk , 2005, Appl. Math. Comput..

[1289]  A. Khanicheh,et al.  Film Effectiveness Downstream of a Row of Compound Angle Film Holes , 2005 .

[1290]  Yu.F. Maydanik,et al.  Loop heat pipes , 2005 .

[1291]  Kambiz Vafai,et al.  Analysis of flexible microchannel heat sink systems , 2005 .

[1292]  Hidetoshi Hashizume,et al.  Heat Transfer Enhancement Technique with Copper Fiber Porous Media , 2005 .

[1293]  Wade T. Crow,et al.  Utility of Assimilating Surface Radiometric Temperature Observations for Evaporative Fraction and Heat Transfer Coefficient Retrieval , 2005 .

[1294]  S. Garimella,et al.  Investigation of heat transfer in rectangular microchannels , 2005 .

[1295]  David Elad,et al.  The Air-Conditioning Capacity of the Human Nose , 2005, Annals of Biomedical Engineering.

[1296]  M. Erdoğan,et al.  The Effects of Duct Shape on the Nusselt Number , 2005 .

[1297]  Noam Lior,et al.  Heat transfer from a cylinder in axial turbulent flows , 2005 .

[1298]  Yan-Ting Lin,et al.  Turbulent film condensation on a horizontal elliptical tube , 2005 .

[1299]  Peter P. Valko,et al.  Solution of the Graetz–Brinkman problem with the Laplace transform Galerkin method , 2005 .

[1300]  A. R. Balakrishnan,et al.  Analysis of pool boiling heat transfer: effect of bubbles sliding on the heating surface , 2005 .

[1301]  Ruzhu Wang,et al.  Investigation of non-equilibrium adsorption character in solid adsorption refrigeration cycle , 2005 .

[1302]  Chen-I Hung,et al.  A study on the non-Fourier effects in spherical media due to sudden temperature changes on the surfaces , 2005 .

[1303]  E. Abo-Eldahab,et al.  MHD Flow and heat transfer of non-Newtonian power-law fluid with diffusion and chemical reaction on a moving cylinder , 2005 .

[1304]  Emad M. Abo-Eldahab.  Hydrodymagnetic three-dimensional flow over a stretching surface with heat and mass transfer , 2005 .

[1305]  Basant Kumar Jha.  Free-convection flow through an annular porous medium , 2005 .

[1306]  Jinjia Wei,et al.  Experimental study of boiling phenomena and heat transfer performances of FC-72 over micro-pin-finned silicon chips , 2005 .

[1307]  A. Al Mers,et al.  Numerical study of heat and mass transfer in adsorption porous medium heated by solar energy: Boubnov-Galerkin method , 2005 .

[1308]  Jinliang Xu,et al.  Start-up and steady thermal oscillation of a pulsating heat pipe , 2005 .

[1309]  F. Couture,et al.  Modeling of Heat and Mass Transfer at the Boundary Between A Porous Medium and Its Surroundings , 2005 .

[1310]  Alan R. Kerstein,et al.  A stochastic model for high-Rayleigh-number convection , 2005, Journal of Fluid Mechanics.

[1311]  N. Sammes,et al.  Dynamic modeling of single tubular SOFC combining heat/mass transfer and electrochemical reaction effects , 2005 .

[1312]  A. A. Salama,et al.  FOURTH-ORDER FINITE-DIFFERENCE METHOD FOR THIRD-ORDER BOUNDARY-VALUE PROBLEMS , 2005 .

[1313]  D. L. Young,et al.  GDQ METHOD FOR NATURAL CONVECTION IN A SQUARE CAVITY USING VELOCITY–VORTICITY FORMULATION , 2005 .

[1314]  Danping Yang,et al.  TWO FINITE-ELEMENT SCHEMES FOR STEADY CONVECTIVE HEAT TRANSFER WITH SYSTEM ROTATION AND VARIABLE THERMAL PROPERTIES , 2005 .

[1315]  Karsten Pruess,et al.  Numerical studies of fluid leakage from a geologic disposal reservoir for CO2 show self‐limiting feedback between fluid flow and heat transfer , 2005 .

[1316]  P. Terpolilli,et al.  Numerical modelling of flow with heat transfer in petroleum reservoirs , 2005 .

[1317]  Hiroshi Tanaka,et al.  A simple and highly productive solar still: a vertical multiple-effect diffusion-type solar still coupled with a flat-plate mirror , 2005 .

[1318]  A. G. Agwu Nnanna,et al.  Experimental Study of Non-Fourier Thermal Response in Porous Media , 2005 .

[1319]  Ahmet Can,et al.  Thermally activated building elements for cooling , 2005 .

[1320]  Laurent Royon,et al.  COMPARISON BETWEEN AQUEOUS POLYMER SOLUTIONS AND WATER AS PHASE CHANGE MATERIAL (PCM) USED FOR COLD TRANSPORT CHAIN , 2005 .

[1321]  Shixue Wang,et al.  AN EXPERIMENTAL STUDY ON THE EFFECT OF NON CONDENSABLE GAS FOR SOLUTAL MARANGONI CONDENSATION HEAT TRANSFER , 2005 .

[1322]  P. T. Zubkov,et al.  NATURAL-CONVECTIVE HEAT TRANSFER IN A SQUARE CAVITY WITH TIME-VARYING SIDE-WALL TEMPERATURE , 2005 .

[1323]  Ghislain Montavon,et al.  COMBINATION OF INVERSE AND NEURAL NETWORK METHODS TO ESTIMATE HEAT FLUX , 2005 .

[1324]  L. W. Wang,et al.  DUCT FLOW PASSING THROUGH A HORIZONTAL CHANNEL WITH TANDEM CYLINDER SOURCES , 2005 .

[1325]  Jie Hu,et al.  Numerical simulation of fluid flow and heat transfer in a plasma spray gun , 2005 .

[1326]  Anil K. Mehrotra,et al.  Solids Deposition from Multicomponent Wax−Solvent Mixtures in a Benchscale Flow-Loop Apparatus with Heat Transfer† , 2005 .

[1327]  Choong-Won Lee,et al.  Analysis of Water Cooling Mechanism by Impinging Jet for Hot Rolled Wire Rod , 2005 .

[1328]  M. S. Sifaoui,et al.  Numerical study of heat transfer in an optically thick semi-transparent spherical porous medium , 2005 .

[1329]  Javad Abolfazli Esfahani,et al.  Entropy Generation Analysis of a Flat Plate Boundary Layer with Various Solution Methods , 2005 .

[1330]  K. W. Tou,et al.  Experimental study of transient forced convection heat transfer from simulated electronic chips , 2005 .

[1331]  Tae-Keun Hong,et al.  Study of the enhanced thermal conductivity of Fe nanofluids , 2005 .

[1332]  Federico Méndez,et al.  Numerical analysis of the transient conjugated heat transfer in a circular duct with a power-law fluid , 2005 .

[1333]  Thirumalachari Sundararajan,et al.  Numerical simulation of three-dimensional natural convection inside a heat generating anisotropic porous medium , 2005 .

[1334]  E. Holzbecher,et al.  Free and forced convection in porous media open at the top , 2005 .

[1335]  Somchai Wongwises,et al.  Effect of fin pattern on the air-side performance of herringbone wavy fin-and-tube heat exchangers , 2005 .

[1336]  Somnath Bhattacharyya,et al.  Vortex shedding around a heated square cylinder under the influence of buoyancy , 2005 .

[1337]  Md. Mamun Molla,et al.  Natural convection flow from an isothermal horizontal circular cylinder with temperature dependent viscosity , 2005 .

[1338]  Chia-Wen Lin,et al.  3D Numerical heat transfer and fluid flow analysis in plate-fin and tube heat exchangers with electrohydrodynamic enhancement , 2005 .

[1339]  M. Lee,et al.  Heat removal by aluminum-foam heat sinks in a multi-air jet impingement , 2005 .

[1340]  P. Raad,et al.  Minimizing the uncertainties associated with the measurement of thermal properties by the Transient thermo-reflectance method , 2005, IEEE Transactions on Components and Packaging Technologies.

[1341]  G. Wachutka,et al.  Transient temperature fields with general nonlinear boundary conditions in electronic systems , 2005, IEEE Transactions on Components and Packaging Technologies.

[1342]  H.Y. Zhang,et al.  Development of liquid cooling techniques for flip chip ball grid array packages with High Heat flux dissipations , 2005, IEEE Transactions on Components and Packaging Technologies.

[1343]  M.-N. Sabry,et al.  Compact thermal models for internal convection , 2005, IEEE Transactions on Components and Packaging Technologies.

[1344]  Sadik Dost,et al.  A Three-dimensional Numerical Simulation Study for the Cathode Side of a Fuel Cell , 2005 .

[1345]  Anna Angela Barba,et al.  Thermal treatments of foods: a predictive general-purpose code for heat and mass transfer , 2005 .

[1346]  Somchai Wongwises,et al.  A tube-by-tube reduction method for simultaneous heat and mass transfer characteristics for plain fin-and-tube heat exchangers in dehumidifying conditions , 2005 .

[1347]  Wei Liu,et al.  Modeling for heat and mass transfer with phase change in porous wick of CPL evaporator , 2005 .

[1348]  B. Ghasemi,et al.  MIXED CONVECTION IN A RECTANGULAR CAVITY WITH A PULSATING HEATED ELECTRONIC COMPONENT , 2005 .

[1349]  Jean-Jacques Greffet,et al.  Heat transfer between two nanoparticles through near field interaction. , 2005, Physical review letters.

[1350]  Belkacem Zeghmati,et al.  Numerical study of boundary layer transition in flowing film evaporation on horizontal elliptical cylinder , 2005 .

[1351]  António Tadeu,et al.  Benchmark Solutions for Three-Dimensional Transient Heat Transfer in Two-Dimensional Environments Via the Time Fourier Transform , 2005 .

[1352]  Zhansheng Guo,et al.  Temperature field of thick thermoset composite laminates during cure process , 2005 .

[1353]  L. D’Alvise,et al.  Finite Element Modelling of Friction Stir Welding of Aluminium Alloy Plates-Inverse Analysis using a Genetic Algorithm , 2005 .

[1354]  Jintu Fan,et al.  Heat and Moisture Transfer with Sorption and Phase Change Through Clothing Assemblies , 2005 .

[1355]  Parham Sadooghi,et al.  Transient combined radiative and conductive heat transfer in plastics , 2005 .

[1356]  Paulo Toro,et al.  Preliminary study of CVD diamond film to improve the performance of heat flux sensors for hypersonic experiments , 2005 .

[1357]  A. Alper Ozalp.  A COMPUTATIONAL STUDY TO PREDICT THE COMBINED EFFECTS OF SURFACE ROUGHNESS AND HEAT FLUX CONDITIONS ON CONVERGING-NOZZLE FLOWS , 2005 .

[1358]  I-C. Liu.  Exact Solutions for a Fluid-Saturated Porous Medium with Heat and Mass Transfer , 2005 .

[1359]  Yui-Chuin Shiah,et al.  Heat Conduction in Dissimilar Anisotropic Media with Bonding Defects/Interface Cracks , 2005 .

[1360]  S. D. Sharma,et al.  Thermal performance of a solar cooker based on an evacuated tube solar collector with a PCM storage unit , 2005 .

[1361]  Adrian Bejan,et al.  Constructal multi-scale cylinders in cross-flow , 2005 .

[1362]  Jader R. Barbosa,et al.  Two-phase non-equilibrium models: the challenge of improving phase change heat transfer prediction , 2005 .

[1363]  Ahmed Naguib,et al.  High-Frequency Oscillating-Hot-Wire Sensor for Near-Wall Diagnostics in Separated Flows , 2005 .

[1364]  ALFONSAS SKRINSKA,et al.  Augmentation of Thermal Effectiveness in the Fixation of Fibrous Material Structures , 2005 .

[1365]  Lixin Cheng,et al.  Experimental Study of Heat Transfer and Pressure Drop Characteristics of Air/Water and Air-Steam/Water Heat Exchange in a Polymer Compact Heat Exchanger , 2005 .

[1366]  J. Thome.  Update on Advances in Flow Pattern Based Two-Phase Heat Transfer Models , 2005 .

[1367]  Moo Hwan Kim,et al.  Experimental Study on the Heat and Mass Transfer of Teflon-Coated Tubes for the Latent Heat Recovery , 2005 .

[1368]  John R. Thome,et al.  Condensation of Zeotropic Mixtures in Horizontal Tubes: New Simplified Heat Transfer Model Based on Flow Regimes , 2005 .

[1369]  Ruzhu Wang,et al.  Experimental study on a continuous adsorption water chiller with novel design , 2005 .

[1370]  P. Mago,et al.  Modeling of condensation heat transfer of pure refrigerants in micro-fin tubes , 2005 .

[1371]  Yoshimichi Hagiwara,et al.  Heat transfer characteristics of warm water flow with cool immiscible droplets in a vertical pipe , 2005 .

[1372]  J. Straub,et al.  Bubble — bubbles — boiling , 2005 .

[1373]  Witold M. Lewandowski,et al.  The Effect of Plate Size on the Natural Convective Heat Transfer Intensity of Horizontal Surfaces , 2005 .

[1374]  Michitsugu Mori,et al.  An experimental study on bubble rise path after the departure from a nucleation site in vertical upflow boiling , 2005 .

[1375]  S. Flores Larsen,et al.  Response of conventional and energy-saving buildings to design and human dependent factors , 2005 .

[1376]  Eduard Egusquiza,et al.  Influence of the turbulence model in CFD modeling of wall-to-fluid heat transfer in packed beds , 2005 .

[1377]  Cha'o-Kuang Chen,et al.  Exergetic efficiency optimization for an irreversible Brayton refrigeration cycle , 2005 .

[1378]  Yves Garrabos,et al.  Convection and heat transfer experiments in supercritical fluid under microgravity: From MIR to ISS , 2005 .

[1379]  M. Bouzidi,et al.  Computation of view factors for surfaces of complex shape including screening effects and using a boundary element approximation , 2005 .

[1380]  Jungho Kim,et al.  Thermocapillary effects on low-g Pool Boiling from microheater arrays of various aspect ratio , 2005 .

[1381]  Felix Sharipov,et al.  Velocity slip and temperature jump coefficients for gaseous mixtures. IV. Temperature jump coefficient , 2005 .

[1382]  Shen-Chun Wu,et al.  Enhancement of thermal performance in a sintered miniature heat pipe , 2005 .

[1383]  Dongliang Quan,et al.  Cooling performance of an impingement cooling device combined with pins , 2005 .

[1384]  Xiulan Huai,et al.  Experimental study and heat transfer analysis on the boiling of saturated liquid nitrogen under transient pulsed laser irradiation , 2005 .

[1385]  E. P. Valueva,et al.  Hydrodynamics and heat transfer in turbulent pipe flow of liquid under conditions of monotonic time variation of the flow rate , 2005 .

[1386]  Oronzio Manca,et al.  Natural convection in vertical, parallel‐plate channels with appended unheated entrances , 2005 .

[1387]  Sridhar Kulkarni,et al.  The onset of Lapwood-Brinkman convection using a thermal non-equilibrium model , 2005 .

[1388]  R. Kandasamy,et al.  Effects of chemical reaction, heat and mass transfer along a wedge with heat source and concentration in the presence of suction or injection , 2005 .

[1389]  N. Tsvetkov,et al.  Heat Transfer in a Plane Three-Layer System with a Not-Through Cross Connection , 2005 .

[1390]  Ho-Hwan Chun,et al.  Direct numerical simulation of turbulent flow in a vertical channel with buoyancy orthogonal to mean flow , 2005 .

[1391]  S. N. Osipov,et al.  Influence of Moisture Evaporation from a Heated Surface on the Thermal Regime of a Capillary-Porous Body in the Initial Period of Drying , 2005 .

[1392]  Bengt Sundén,et al.  An experimental and theoretical investigation of the effect of flow maldistribution on the thermal performance of plate heat exchangers , 2005 .

[1393]  Gerhard Zimmermann,et al.  Directional solidification of dendritic microstructures in microgravity and with forced melt flow , 2005 .

[1394]  Jules Thibault,et al.  Analytical Solution of Viscoelastic Fluid Flow and Heat Transfer through an Annulus , 2005 .

[1395]  José Fernández-Seara,et al.  Ammonia-water absorption in vertical tubular absorbers , 2005 .

[1396]  Ali J. Chamkha,et al.  Unsteady mixed convection on the stagnation-point flow adjacent to a vertical plate with a magnetic field , 2005 .

[1397]  Gian Piero Celata,et al.  Experimental result on rewetting of hot surfaces by droplet impingement , 2005 .

[1398]  Zongjin Li,et al.  Granular phase changing composites for thermal energy storage , 2005 .

[1399]  Pingjian Ming,et al.  Research on marine boiler’s pressurized combustion and heat transfer , 2005 .

[1400]  Y. C. Hsieh,et al.  Optimal Allocation of Heat Transfer Area for a Heat Engine , 2005 .

[1401]  Dongsoo Jung,et al.  Condensation heat transfer coefficients of binary HFC mixtures on low fin and Turbo-C tubes , 2005 .

[1402]  A. V. Attetkov,et al.  Optimum Thickness of a Cooled Wall in Local Pulse-Periodic Heating , 2005 .

[1403]  M. Q. McQuay,et al.  Convective heat transfer from a partially premixed impinging flame jet. Part II: Time-resolved results , 2005 .

[1404]  Gilles Flamant,et al.  3D modelling of radiative heat transfer in circulating fluidized bed combustors: influence of the particulate composition , 2005 .

[1405]  Richard J. Winfield,et al.  Development of an algorithm to extract thermal diffusivity for the radial converging wave technique , 2005 .

[1406]  Ali Akbar Merrikh,et al.  Natural convection in an enclosure with disconnected and conducting solid blocks , 2005 .

[1407]  Peter Vadasz,et al.  Sudden or smooth transitions in porous media natural convection , 2005 .

[1408]  S. Ergin,et al.  A Study of the Effect of Duct Width on Fully Developed Turbulent Flow Characteristics in a Corrugated Duct , 2005 .

[1409]  M. S. Krakov,et al.  Thermomagnetic convection in a porous enclosure in the presence of outer uniform magnetic field , 2005 .

[1410]  A. Degiovanni,et al.  Measurement of the In-plane Thermal Diffusivity of Materials by Infrared Thermography , 2005 .

[1411]  Stefan Luther,et al.  Hot-film anemometry in bubbly flow I: bubble–probe interaction , 2005 .

[1412]  Masahiro Sugawara,et al.  Effect of cavity inclination on a temperature and concentration controlled double diffusive convection at ice plate melting , 2005 .

[1413]  Juan Andrés Martín García,et al.  A sequential algorithm of inverse heat conduction problems using singular value decomposition , 2005 .

[1414]  Ephraim M Sparrow,et al.  Heat transfer to flow through porous passages using extended weighted residuals method - A Green's function solution , 2005 .

[1415]  O. Kaynakli,et al.  Thermal comfort during heating and cooling periods in an automobile , 2005 .

[1416]  Mohammed Hasnaoui,et al.  Soret driven thermosolutal convection in a shallow porous layer with a stress‐free upper surface , 2005 .

[1417]  Je-Chin Han,et al.  Heat Transfer in Two-Pass Rotating Rectangular Channels (AR=1:2 and AR=1:4) With Smooth Walls , 2005 .

[1418]  J. Zueco,et al.  Numerical nonlinear inverse problem of determining wall heat flux , 2005 .

[1419]  Hiroshi Honda,et al.  Condensation of R407C in a horizontal microfin tube , 2005 .

[1420]  John H. Merkin,et al.  Steady states, oscillations and heat explosion in a combustion problem with convection , 2005 .

[1421]  Michel Bellet,et al.  An ALE‐FEM approach to the thermomechanics of solidification processes with application to the prediction of pipe shrinkage , 2005 .

[1422]  F. Khaldi,et al.  On the similarity between gravity and magneto-gravity convection within a non-electroconducting fluid in a differentially heated rectangular cavity , 2005 .

[1423]  Katsuto Nakatsuka,et al.  Performance evaluation of citric ion-stabilized magnetic fluid heat pipe , 2005 .

[1424]  S. C. Tzeng,et al.  Study of mixed convective heat transfer in a sintered porous channel , 2005 .

[1425]  Koji Okamoto,et al.  Radiation induced surface activation on Leidenfrost and quenching phenomena , 2005 .

[1426]  Bin-Juine Huang,et al.  Heat-pipe enhanced solar-assisted heat pump water heater , 2005 .

[1427]  Kerstin Meinander,et al.  The influence of heat transfer coefficient on cooling time in injection molding , 2005 .

[1428]  Yasushi Takeda,et al.  Effects of heat source distribution on natural convection induced by internal heating , 2005 .

[1429]  Wang Xiao-mo,et al.  Investigation on the characteristics of boiling heat transfer through narrow annular channels , 2005 .

[1430]  D. Yogi Goswami,et al.  Analysis of a counter-current vapor flow absorber , 2005 .

[1431]  Donald A. Nield,et al.  Thermally developing forced convection in a channel occupied by a porous medium saturated by a non-Newtonian fluid , 2005 .

[1432]  Chih-Yung Wen,et al.  Natural convection of magnetic fluid in a rectangular Hele-Shaw cell , 2005 .

[1433]  Halit Karabulut,et al.  Thermodynamic analysis of the V-type Stirling-cycle refrigerator , 2005 .

[1434]  Mohand Tazerout,et al.  Unsteady Heat Transfer Enhancement Around an Engine Cylinder in Order to Detect Knock , 2005 .

[1435]  N. Ghaddar,et al.  Modulated Air Layer Heat and Moisture Transport by Ventilation and Diffusion From Clothing With Open Aperture , 2005 .

[1436]  E. Grulke,et al.  Heat transfer properties of nanoparticle-in-fluid dispersions (nanofluids) in laminar flow , 2005 .

[1437]  Rached Ben-Mansour,et al.  Erosion in the tube entrance region of a shell and tube heat exchanger , 2005 .

[1438]  Ashok K. Singh,et al.  Natural convection near a vertical plate with ramped wall temperature , 2005 .

[1439]  Rahmatollah Khodabandeh.  Heat transfer in the evaporator of an advanced two-phase thermosyphon loop , 2005 .

[1440]  Darina B. Murray,et al.  The effect of the liquid motion induced by air and vapor bubbles on heat transfer around a cylinder , 2005 .

[1441]  J. H. Bolstad,et al.  An exact solution for the linearized multifrequency radiation diffusion equation , 2005 .

[1442]  E. Pulat,et al.  Theoretical study of combined heat and mass transfer process during paper drying , 2005 .

[1443]  Tov Elperin,et al.  Mass and heat transfer during solid sphere dissolution in a non-uniform fluid flow , 2005 .

[1444]  S. V. Alekseenko,et al.  Influence of condensation on the stability of a liquid film moving under the effect of gravity and turbulent vapor flow , 2005 .

[1445]  Yong-gang Lv,et al.  Interpretation on thermal comfort mechanisms of human bodies by combining Hodgkin-Huxley neuron model and Pennes bioheat equation , 2005 .

[1446]  N. M. Rao,et al.  Pressure variation in a natural circulation loop with end heat exchangers , 2005 .

[1447]  Peter Vadasz.  Absence of Oscillations and Resonance in Porous Media Dual-Phase-Lagging Fourier Heat Conduction , 2005 .

[1448]  Masahiro Kawaji,et al.  Microgravity performance of micro pulsating heat pipes , 2005 .

[1449]  I. Liu,et al.  Heat transfer of an electrically conducting viscoelastic fluid over a stretching sheet , 2005 .

[1450]  J. Thome,et al.  Flow Visualization and Flow Pattern Identification With Power Spectral Density Distributions of Pressure Traces During Refrigerant Condensation in Smooth and Microfin Tubes , 2005 .

[1451]  Petri Sallinen,et al.  Numerical and experimental modelling of gas flow and heat transfer in the air gap of an electric machine. Part II: Grooved surfaces , 2005 .

[1452]  Louis C. Burmeister,et al.  Heat Transfer for Laminar Flow in Spiral Ducts of Rectangular Cross Section , 2005 .

[1453]  Junseok Ko,et al.  A novel concept of rapid cooling method of refrigeration system , 2005 .

[1454]  V. S. Kolunin.  Heat and mass transfer in porous media with ice inclusions near the freezing-point , 2005 .

[1455]  G. H. Yeoh,et al.  On Population Balance Approach for Subcooled Boiling Flow Prediction capability of using the population balance approach combined with a three , 2005 .

[1456]  S. H. Noie.  Heat transfer characteristics of a two-phase closed thermosyphon , 2005 .

[1457]  Robert Dobson.  An open oscillatory heat pipe water pump , 2005 .

[1458]  Cha'o-Kuang Chen,et al.  Film condensation on a finite-size horizontal wavy plate bounded by a homogenous porous layer , 2005 .

[1459]  Hamou Sadat,et al.  A general lumped model for transient heat conduction in one-dimensional geometries , 2005 .

[1460]  Inmaculada Arauzo,et al.  Quick estimate of the heat transfer characteristics of annular fins of hyperbolic profile with the power series method , 2005 .

[1461]  Yasin Ust,et al.  Ecological performance analysis of an endoreversible regenerative Brayton heat-engine , 2005 .

[1462]  S. Canbazoğlu,et al.  Enhancement of solar thermal energy storage performance using sodium thiosulfate pentahydrate of a conventional solar water-heating system , 2005 .

[1463]  Chin-Chia Su,et al.  Characteristics of a series-connected two-evaporator refrigerating system , 2005 .

[1464]  Nicolas Galanis,et al.  Numerical prediction of ventilation patterns and thermal processes in ice rinks , 2005 .

[1465]  D. C. Groeneveld,et al.  Prediction of the obstacle effect on film-boiling heat transfer , 2005 .

[1466]  Masud Behnia,et al.  An Experimental and Computational Study of Heat Transfer in High Power Amplifiers , 2005 .

[1467]  Cai Rui-xian,et al.  Explicit analytical solutions of axisymmetric laminar natural convection along vertical tubes , 2005 .

[1468]  Søren Knudsen Kær.  Straw combustion on slow-moving grates—a comparison of model predictions with experimental data , 2005 .

[1469]  David F. Fletcher,et al.  Laminar Flow and Heat Transfer in a Periodic Serpentine Channel , 2005 .

[1470]  Lotfollah Ghodoossi,et al.  Thermal and hydrodynamic analysis of a fractal microchannel network , 2005 .

[1471]  Orhan Aydin,et al.  Effects of viscous dissipation on the heat transfer in forced pipe flow. Part 1: both hydrodynamically and thermally fully developed flow , 2005 .

[1472]  Francis J. Doyle,et al.  Mass and heat transfer modeling of a physical vapor deposition effusion source , 2005 .

[1473]  Hüseyin Yapıcı,et al.  Numerical study on conjugate heat transfer in laminar fully developed flow with temperature dependent thermal properties through an externally heated SiC/SiC composite pipe and thermally induced stress , 2005 .

[1474]  Gilles Trystram,et al.  A method for time and spatially resolved measurement of convective heat transfer coefficient (h) in complex flows , 2005 .

[1475]  A. Baïri,et al.  Importance of radiative heat exchange in 2D closed diode cavities applied to solar collectors and building , 2005 .

[1476]  Timothy A. Haley,et al.  An Improved Method to Estimate Temperatures and Lethality During the Cooling Stage of Sterilized Cylindrical Cans , 2005 .

[1477]  Sergey Minaev,et al.  Flame stability in a system with counterflow heat exchange , 2005 .

[1478]  Hongmin Li,et al.  Single- and multi-hole baffles—a heat transfer and fluid flow control for hydrothermal growth , 2005 .

[1479]  R. Sh. Abiev,et al.  A new form of the heat- and mass-transfer and fluid-flow equations , 2005 .

[1480]  Akbar Khodaparast Haghi.  A study of heat and mass transfer in porous material under equilibrium conditions , 2005 .

[1481]  Hans Müller-Steinhagen,et al.  Fouling of tube bundles under pool boiling conditions , 2005 .

[1482]  M. Buchholz,et al.  Experiments on the fundamental mechanisms of boiling heat transfer , 2005 .

[1483]  Jorge Welti-Chanes,et al.  Transport phenomena in food engineering: basic concepts and advances , 2005 .

[1484]  C. Kobus,et al.  Development of a theoretical model for predicting the thermal performance characteristics of a vertical pin-fin array heat sink under combined forced and natural convection with impinging flow , 2005 .

[1485]  Masafumi Katsuta,et al.  Steady and Transient Heat Transfer Characteristics of Flat Micro Heatpipe , 2005 .

[1486]  Zhang Jianwei,et al.  Two-Phase Instability Analysis in Natural Circulation Loops of China Advanced Research Reactor , 2005 .

[1487]  Hugh H. T. Liu,et al.  Fluid Flow and Thermodynamic Analysis of a Wing Anti-Icing System , 2005 .

[1488]  Hyunchul Ju,et al.  A single-phase, non-isothermal model for PEM fuel cells , 2005 .

[1489]  Paul I. Ro,et al.  Forced Convective Cooling via Acoustic Streaming in a Narrow Channel Established by a Vibrating Piezoelectric Bimorph , 2005 .

[1490]  Karen A. Thole,et al.  Comparison of Measurements and Predictions for Blowing from a Turbine Blade Tip , 2005 .

[1491]  Gary R. Consolazio,et al.  Numerical modeling of transport phenomena in reinforced concrete exposed to elevated temperatures , 2005 .

[1492]  Yuan Taur,et al.  Simulation of Nanoscale Multidimensional Transient Heat Conduction Problems Using Ballistic-Diffusive Equations and Phonon Boltzmann Equation , 2005 .

[1493]  G. T. Fraser,et al.  A Summary of Heat-Flux Sensor Calibration Data , 2005, Journal of research of the National Institute of Standards and Technology.

[1494]  Teresa R. S. Brandão,et al.  Integrated approach on solar drying, pilot convective drying and microstructural changes , 2005 .

[1495]  Emad M. Abo-Eldahab,et al.  Flow and heat transfer in a micropolar fluid past a stretching surface embedded in a non-Darcian porous medium with uniform free stream , 2005, Appl. Math. Comput..

[1496]  Jacques Padet,et al.  Transient convective heat transfer , 2005 .

[1497]  Whye-Teong Ang.  A time-stepping dual-reciprocity boundary element method for anisotropic heat diffusion subject to specification of energy , 2005, Appl. Math. Comput..

[1498]  A. Smith,et al.  Measurement of Thermal Boundary Conductance of a Series of Metal-Dielectric Interfaces by the Transient Thermoreflectance Technique , 2005 .

[1499]  Abhijit Mukherjee,et al.  Experimental Study of Heat Transfer in an Evaporating Meniscus on a Moving Heated Surface , 2005 .

[1500]  Afshin J. Ghajar,et al.  Non-boiling heat transfer in gas-liquid flow in pipes: a tutorial , 2005 .

[1501]  Masayuki Kaiho,et al.  Advanced numerical simulation of heat transfer problems , 2005 .

[1502]  Horng-Wen Wu,et al.  Turbulent flow and heat transfer enhancement of mixed convection over heated blocks in a channel , 2005 .

[1503]  Somchart Chantasiriwan.  TWO CARTESIAN GRID METHODS FOR SOLVING THE POISSON PROBLEM IN AN ARBITRARY DOMAIN , 2005 .

[1504]  Wilson K. S. Chiu,et al.  A TWO-DIMENSIONAL SCHEME FOR AXISYMMETRIC RADIATIVE HEAT TRANSFER USING THE FINITE-VOLUME METHOD , 2005 .

[1505]  Tsung-Chien Chen,et al.  INPUT ESTIMATION METHOD INCLUDING FINITE-ELEMENT SCHEME FOR SOLVING INVERSE HEAT CONDUCTION PROBLEMS , 2005 .

[1506]  Yutaka Asako,et al.  HEAT TRANSFER CHARACTERISTICS OF GASEOUS FLOWS IN MICROCHANNELS , 2005 .

[1507]  Kazuhiro Fukuyo,et al.  POWER-SERIES METHOD FOR TWO-DIMENSIONAL HEAT CONDUCTION PROBLEMS , 2005 .

[1508]  Gopalan Jagadeesh,et al.  Film cooling effectiveness on a large angle blunt cone flying at hypersonic speed , 2005 .

[1509]  Arun S. Mujumdar,et al.  Impingement Heat Transfer for a Cluster of Laminar Impinging Jets Issuing from Noncircular Nozzles , 2005 .

[1510]  Y. Liu,et al.  A MESHLESS METHOD BASED ON LEAST-SQUARES APPROACH FOR STEADY- AND UNSTEADY-STATE HEAT CONDUCTION PROBLEMS , 2005 .

[1511]  D. Temkin.  Ivantsov parabolic solution for two combined moving interfaces , 2005 .

[1512]  George E. Georghiou,et al.  Simulation for the transition from non-thermal to thermal discharges , 2005 .

[1513]  V. A. Drebushchak,et al.  Calibration coefficient of a heat-flow DSC; Part II. Optimal calibration procedure , 2005 .

[1514]  Haitian Yang,et al.  The use of cyclic symmetry in EFG analysis for heat transfer problems , 2005 .

[1515]  W. Rodi,et al.  Experiments on the flow past long circular cylinders in a shear flow , 2005 .

[1516]  Xiaofeng Peng,et al.  Formation, structure, and evolution of boiling nucleus and interfacial tension between bulk liquid phase and nucleus , 2005 .

[1517]  Norbert Kockmann,et al.  Fluid Dynamics and Transfer Processes in Bended Microchannels , 2005 .

[1518]  Srinivas Garimella,et al.  Condensation Pressure Drop in Circular Microchannels , 2005 .

[1519]  Akimaro Kawahara,et al.  Effects of Channel Diameter and Liquid Properties on Void Fraction in Adiabatic Two-Phase Flow Through Microchannels , 2005 .

[1520]  Davide Del Col,et al.  Condensation Heat Transfer and Pressure Gradient Inside Multiport Minichannels , 2005 .

[1521]  Mark Davies,et al.  Direct Comparison between Five Different Microchannels, Part 1: Channel Manufacture and Measurement , 2005 .

[1522]  John R. Grace,et al.  Heat transfer in fluidized beds: design methods , 2005 .

[1523]  Pascal Gardin,et al.  Numerical Simulation of Gas-Jet Wiping in Steel Strip Galvanizing Process , 2005 .

[1524]  B. Moon,et al.  Solidification Parameters Dependent on Interfacial Heat Transfer Coefficient between Aluminum Casting and Copper Mold , 2005 .

[1525]  Adrian Lenardic,et al.  The role of chemical boundary layers in regulating the thickness of continental and oceanic thermal boundary layers , 2005 .

[1526]  L. A. Melnikovsky.  Heat Transfer in Superfluids: Effect of Gravity , 2005 .

[1527]  Hui Li,et al.  Numerical Simulation of Thermal Effects of Read Current on Magnetoresistive Signal , 2005 .

[1528]  Marián Slodička,et al.  Determination of the heat-transfer coefficient during solidification of alloys , 2005 .

[1529]  Katsuhisa Noto,et al.  TEMPERATURE FIELD WITH THERMAL CYLINDERS IN BUOYANT FLOW IN STABLY STRATIFIED AIR , 2005 .

[1530]  Hiroyuki Hirano,et al.  THE BEHAVIOR OF MICROSCALED BROWNIAN PARTICLES IN A CYLINDER UNDER NATURAL-AND MAGNETIC-CONVECTION FLOW FIELD OF AIR , 2005 .

[1531]  R. Jachuck,et al.  Performance of a square, cross-corrugated, polymer film, compact, heat-exchanger with potential application in fuel cells , 2005 .

[1532]  Laura Schaefer,et al.  Numerical study of a flat-tube high power density solid oxide fuel cell: Part I. Heat/mass transfer and fluid flow , 2005 .

[1533]  Howard P. Hodson,et al.  Measurement and interpretation of the heat transfer coefficients of metal foams , 2005 .

[1534]  Jintu Fan,et al.  Heat and Moisture Transfer with Sorption and Phase Change Through Clothing Assemblies , 2005 .

[1535]  P.G. Moore,et al.  An inverse heat transfer model of thermal degradation within multifunctional tensioned cable structures , 2005 .

[1536]  Vijay K. Dhir,et al.  Wall Heat Flux Partitioning During Subcooled Flow Boiling: Part II—Model Validation , 2005 .

[1537]  Adrian Bejan,et al.  Constructal multi-scale structure for maximal heat transfer density in natural convection , 2005 .

[1538]  A. Gallegos-Muñoz,et al.  Critical heat flux prediction for water boiling in vertical tubes of a steam generator , 2005 .

[1539]  Somchai Wongwises,et al.  Two-phase flow of refrigerants during evaporation under constant heat flux in a horizontal tube ☆ , 2005 .

[1540]  William Barcellos,et al.  Energy Extraction From a Porous Media Reciprocal Flow Burner With Embedded Heat Exchangers , 2005 .

[1541]  J. Fricke,et al.  PCM-facade-panel for daylighting and room heating , 2005 .

[1542]  Sassi Ben Nasrallah,et al.  Numerical study of interaction between the fluid structure and the moving interface during the melting from below in a rectangular closed enclosure , 2005 .

[1543]  Roderick Melnik,et al.  Thermal behavior of absorbing and scattering glass media containing molecular water impurity , 2005 .

[1544]  Pavel Kuzhir,et al.  Capillary flow of a suspension of non-magnetic particles in a ferrofluid under highly non-uniform magnetic field , 2005 .

[1545]  Mervyn Smyth,et al.  Experimental comparison of alternative convection suppression arrangements for concentrating integral collector storage solar water heaters , 2005 .

[1546]  Jitesh S. B. Gajjar,et al.  Absolute and convective instabilities in the incompressible boundary layer on a rotating disk with temperature-dependent viscosity , 2005 .

[1547]  Mingyan Liu,et al.  Chaotic forecasting of time series of heat-transfer coefficient for an evaporator with a two-phase flow , 2005 .

[1548]  Michael L. Johns,et al.  Using magnetic resonance to validate predictions of the solid fraction formed during recalescence of freezing drops , 2005 .

[1549]  Antonio Sánchez Kaiser,et al.  NUMERICAL MODEL OF EVAPORATIVE COOLING PROCESSES IN A NEW TYPE OF COOLING TOWER , 2005 .

[1550]  Masud Behnia,et al.  Analysis of the flow structure and heat transfer in a vertical mantle heat exchanger , 2005 .

[1551]  Alexander J. White,et al.  Viscous and unsteady flow calculations of condensing steam in nozzles , 2005 .

[1552]  Robert B. Roemer,et al.  An Analytical Study of Heat Transfer in Finite Tissue With Two Blood Vessels and Uniform Dirichlet Boundary Conditions , 2005 .

[1553]  Janusz S. Szmyd,et al.  Convection of air in a cubic enclosure with an electric coil inclined in general orientations , 2005 .

[1554]  Suyi Huang,et al.  Study of boiling incipience and heat transfer enhancement in forced flow through narrow channels , 2005 .

[1555]  Mohamed Eissa Sayed-Ahmed,et al.  Laminar fully developed flow and heat transfer of RobertsonStiff fluids in a rectangular duct , 2005 .

[1556]  Mohammad Jamialahmadi,et al.  Pressure drop, gas hold-up and heat transfer during single and two-phase flow through porous media , 2005 .

[1557]  S. Harmand,et al.  Local convective heat transfer for laminar and turbulent flow in a rotor-stator system , 2005 .

[1558]  P. V. S. N. Murthy,et al.  Effect of viscous dissipation on the mixed convection heat transfer from an exponentially stretching surface , 2005 .

[1559]  Chunxin Yang,et al.  Prediction of thermal contact conductance based on the statistics of the roughness profile characteristics , 2005 .

[1560]  Paul J. Antaki,et al.  New Interpretation of Non-Fourier Heat Conduction in Processed Meat , 2005 .

[1561]  Alain J. Kassab,et al.  A meshless method for conjugate heat transfer problems , 2005 .

[1562]  Guillaume Polidori,et al.  Effect of the gap size in the start-up free convective flow around a square prism near a wall , 2005 .

[1563]  F. Chovanec,et al.  Temperature oscillations in thin metallic tapes with transport current at liquid nitrogen temperature , 2005 .

[1564]  Wasim Saman,et al.  Thermal performance of PCM thermal storage unit for a roof integrated solar heating system , 2005 .

[1565]  Maria Laura Martins-Costa,et al.  A mixture theory model for the forced convection flow through an unsaturated wellbore , 2005 .

[1566]  Simon Furbo,et al.  Thermal stratification in small solar domestic storage tanks caused by draw-offs , 2005 .

[1567]  V. I. Kondrashov,et al.  Thermoanalysis of juicy agricultural raw material storehouses with multilayer building envelopes , 2005 .

[1568]  Hosni I. Abu-Mulaweh,et al.  Turbulent mixed convection flow over a forward-facing step—the effect of step heights , 2005 .

[1569]  Masud Behnia,et al.  Measurement and simulation of flow rate in a water-in-glass evacuated tube solar water heater , 2005 .

[1570]  Greg F. Naterer,et al.  Eulerian cross-phase diffusive effects on impinging droplets and phase change heat transfer , 2005 .

[1571]  Ho-Ming Yeh,et al.  Chilled air production in cool–thermal discharge systems from ice melting under constant heat flux and melt removal , 2005 .

[1572]  M. V. Krishna Murthy,et al.  Mixed convection in a shallow enclosure with a series of heat generating components , 2005 .

[1573]  Wei Liu,et al.  Ultrahigh CHF Prediction for Subcooled Flow Boiling Based on Homogenous Nucleation Mechanism , 2005 .

[1574]  Tomoaki Kunugi,et al.  DNS of falling film structure and heat transfer via MARS method , 2005 .

[1575]  Danesh K. Tafti,et al.  Evaluating the role of subgrid stress modeling in a ribbed duct for the internal cooling of turbine blades , 2005 .

[1576]  Atul Srivastava,et al.  Interferometric study of buoyancy-driven convection in a differentially heated circular fluid layer , 2005 .

[1577]  J. Fukai,et al.  Anisotropic heat transfer in composites based on high-thermal conductive carbon fibers , 2005 .

[1578]  Esam M. Alawadhi,et al.  Temperature regulator unit for fluid flow in a channel using phase change material , 2005 .

[1579]  Qiuwang Wang,et al.  Development of a plate-pin fin heat sink and its performance comparisons with a plate fin heat sink , 2005 .

[1580]  Tanongkiat Kiatsiriroat,et al.  Heat transfer and friction characteristics of crimped spiral finned heat exchangers with dehumidification. , 2005 .

[1581]  Ruzhu Wang,et al.  Experimental performance of a silica gel¿water adsorption chiller , 2005 .

[1582]  C. Ni Riain,et al.  The development of an accurate tool to determine convective heat transfer coefficients in real buildings , 2005 .

[1583]  Robert Palumbo,et al.  Solar Blind Pyrometer Temperature Measurements in High Temperature Solar Thermal Reactors: A Method for Correcting the System-Sensor Cavity Reflection Error , 2005 .

[1584]  F. Giacobbe.  Determination of gaseous heat transfer coefficients at elevated temperatures , 2005 .

[1585]  Recep Yumrutaş,et al.  Modeling of a space cooling system with underground storage , 2005 .

[1586]  Michael B. Cortie,et al.  Radiative heat transfer across glass coated with gold nano-particles , 2005 .

[1587]  Jane H. Davidson,et al.  Scaling in Polymer Tubes and Interpretation for Use in Solar Water Heating Systems , 2005 .

[1588]  Simon Furbo,et al.  Thermal Performance of a Large Low Flow Solar Heating System With a Highly Thermally Stratified Tank , 2005 .

[1589]  G. P. Peterson,et al.  Investigation of a Novel Flat Heat Pipe , 2005 .

[1590]  Timothy H. Sanders,et al.  A MODEL FOR TEMPERATURE AND MOISTURE DISTRIBUTION DURING CONTINUOUS MICROWAVE DRYING , 2005 .

[1591]  S. D. Kim,et al.  Heat‐transfer coefficient in viscous liquid–solid circulating fluidized beds , 2005 .

[1592]  Yasuyuki Takata,et al.  Effect of surface wettability on boiling and evaporation , 2005 .

[1593]  S. Budžaki,et al.  Determination of convective heat transfer coefficient during frying of potato dough , 2005 .

[1594]  J. Lanoisellé,et al.  Heat transfer coefficients measurement in industrial freezing equipment by using heat flux sensors , 2005 .

[1595]  Sung Chul Cha.  Optimization of the Heat Transfer Rate and Pressure Drop of Inside Profiled Tubes – Part 1 , 2005 .

[1596]  M. R. Rodríguez,et al.  Modelling the Transient Thermal Behaviour of Sand Substrate heated by Electric Cables , 2005 .

[1597]  A. I. Karpenko,et al.  Water flow rate pulsations with a flicker power spectrum in a commercial sodium steam generator , 2005 .

[1598]  Susana E. Zorrilla,et al.  Mathematical modeling for immersion chilling and freezing of foods: Part I: Model development , 2005 .

[1599]  Susana E. Zorrilla,et al.  Mathematical modeling for immersion chilling and freezing of foods: Part II: Model solution , 2005 .

[1600]  K. Sumathy,et al.  Performance analysis of a continuous multi-bed adsorption rotary cooling system , 2005 .

[1601]  S. C. Kaushik,et al.  General performance characteristics of an irreversible vapour absorption refrigeration system using finite time thermodynamic approach , 2005 .

[1602]  Seung Wook Baek,et al.  Radiation affected ignition and flame propagation for solid fuel in a cylindrical enclosure , 2005 .

[1603]  Wolfgang Schiel,et al.  Design of Commercial Solar Updraft Tower Systems—Utilization of Solar Induced Convective Flows for Power Generation , 2005 .

[1604]  Sih-Li Chen,et al.  Optimization of an ice-storage air conditioning system using dynamic programming method , 2005 .

[1605]  Vijay K. Dhir,et al.  Wall Heat Flux Partitioning During Subcooled Flow Boiling: Part 1—Model Development , 2005 .

[1606]  Kenneth R Diller,et al.  Bioheat and mass transfer as viewed through a microscope. , 2005, Journal of biomechanical engineering.

[1607]  Orhan Aydin,et al.  Laminar boundary layer flow over a horizontal permeable flat plate , 2005, Appl. Math. Comput..

[1608]  I. Mudawar,et al.  Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part II—heat transfer characteristics , 2005 .

[1609]  Brian G. Thomas,et al.  Numerical study of flow and heat transfer in a molten flux layer , 2005 .

[1610]  Raj M. Manglik,et al.  Nucleate pool boiling of aqueous polymer solutions on a cylindrical heater , 2005 .

[1611]  Bourhan Tashtoush,et al.  Transient mixed convection with internal heat generation and oscillating plate temperature , 2005 .

[1612]  Jane E. Sargison,et al.  Flow visualisation of the external flow from a converging slot-hole film-cooling geometry , 2005 .

[1613]  P. Hatzikonstantinou,et al.  A NUMERICAL PROCEDURE FOR THE LAMINAR HEAT TRANSFER IN CURVED SQUARE DUCTS , 2005 .

[1614]  Wolfgang Marquardt,et al.  DESIGN, FORMULATION, AND SOLUTION OF MULTIDIMENSIONAL INVERSE HEAT CONDUCTION PROBLEMS , 2005 .

[1615]  Philippos K. Tsourkas,et al.  A PARALLEL GENETIC ALGORITHM FOR HEAT CONDUCTION PROBLEMS , 2005 .

[1616]  Zhaoli Guo,et al.  A LATTICE BOLTZMANN MODEL FOR CONVECTION HEAT TRANSFER IN POROUS MEDIA , 2005 .

[1617]  Xiangqiao Yan,et al.  Finite element formulation of a heat transfer problem for an axisymmetric composite structure , 2005 .

[1618]  Harish P. Cherukuri,et al.  A modified sequential function specification finite element-based method for parabolic inverse heat conduction problems , 2005 .

[1619]  L. Fan,et al.  Three-dimensional simulation of impingement of a liquid droplet on a flat surface in the Leidenfrost regime , 2005 .

[1620]  Pierre Freton,et al.  Numerical modelling of an electric arc and its interaction with the anode: part II. The three-dimensional model—influence of external forces on the arc column , 2005 .

[1621]  Yu. G. Verevochkin,et al.  Effect of absorption of solar radiation by water of different optical types on convection and heat transfer just under the air–water interface: the case of zero wind speed , 2005, Journal of Fluid Mechanics.

[1622]  Vinod Narayanan,et al.  Application of heated-thin-foil thermography technique to external convective microscale flows , 2005 .

[1623]  Guillermo Aguilar,et al.  Radial and temporal variations in surface heat transfer during cryogen spray cooling , 2005, Physics in medicine and biology.

[1624]  Yan Liu,et al.  Meshless Least-Squares Method for Solving the Steady-State Heat Conduction Equation , 2005 .

[1625]  Dennis Y.C. Leung,et al.  Theoretical study of heat transfer with moving phase-change interface in thawing of frozen food , 2005 .

[1626]  Mohamed Mojahed,et al.  A study of heat transfer in liquid bridges near onset of instability , 2005 .

[1627]  Krzysztof Dems,et al.  SENSITIVITY ANALYSIS AND OPTIMAL DESIGN FOR STEADY CONDUCTION PROBLEM WITH RADIATIVE HEAT TRANSFER , 2005 .

[1628]  Christ Glorieux,et al.  Photopyroelectric measurement of thermal conductivity of metallic powders , 2005 .

[1629]  Medhat M. Helal,et al.  Group method analysis of magneto-elastico-viscous flow along a semi-infinite flat plate with heat transfer , 2005 .

[1630]  T. M. N. Metwaly,et al.  Thermohydrodynamic instabilities of conducting liquid jets in the presence of time-dependent transverse electric fields , 2005 .

[1631]  J. Bellettre,et al.  STUDIES OF THE TRANSPIRATION COOLING THROUGH A SINTERED STAINLESS STEEL PLATE , 2005 .

[1632]  Amalio F. Pacheco,et al.  Reducing the heat transfer through a wall , 2005 .

[1633]  Jean-Luc Battaglia,et al.  ESTIMATED TEMPERATURE ON A MACHINED SURFACE USING AN INVERSE APPROACH , 2005 .

[1634]  Wen-Shing Lee,et al.  CHARGE AND DISCHARGE CHARACTERISTICS OF A THERMAL ENERGY STORAGE DEVICE , 2005 .

[1635]  D. Leitner,et al.  Heat flow in proteins: computation of thermal transport coefficients. , 2005, The Journal of chemical physics.

[1636]  Chang Shu,et al.  SIMULATION OF NATURAL CONVECTION IN ECCENTRIC ANNULI BETWEEN A SQUARE OUTER CYLINDER AND A CIRCULAR INNER CYLINDER USING LOCAL MQ-DQ METHOD , 2005 .

[1637]  D. Naylor,et al.  EVALUATION OF AN APPROXIMATE METHOD FOR PREDICTING THE U VALUE OF A WINDOW WITH A BETWEEN-PANES BLIND , 2005 .

[1638]  Jongmyung Park,et al.  NUMERICAL PREDICTIONS OF HEAT TRANSFER AND FLUID FLOW CHARACTERISTICS FOR SEVEN DIFFERENT DIMPLED SURFACES IN A CHANNEL , 2005 .

[1639]  Hüseyin Yapıcı,et al.  Numerical solutions of transient temperature and thermally induced stress distributions in a solid disk heated with radially periodic expanding and contracting ring heat flux , 2005 .

[1640]  Ramón Quintanilla,et al.  Spatial behaviour of solutions of the dual‐phase‐lag heat equation , 2005 .

[1641]  Fengrui Sun,et al.  Ecological optimization for generalized irreversible Carnot refrigerators , 2005 .

[1642]  Wei Zhang,et al.  Improving reliability of modelling heat and fluid flow in complex gas metal arc fillet welds—part I: an engineering physics model , 2005 .

[1643]  Yukihiro Higashi,et al.  Vapor−Liquid Equilibrium (VLE) Properties for the Binary Systems Propane (1) + n-Butane (2) and Propane (1) + Isobutane (3) , 2005 .

[1644]  Chin-Hsiang Cheng,et al.  Predictions of internal temperature distribution of PEMFC by non-destructive inverse method , 2005 .

[1645]  Li Wang,et al.  Surface–particle–emulsion model of heat transfer between a fluidized bed and an immersed surface , 2005 .

[1646]  Manish Kamal,et al.  Modeling of Melt Flow and Surface Standing Waves in a Continuous Casting Mold , 2005 .

[1647]  Luisa F. Cabeza,et al.  Long term immersion corrosion tests on metal‐PCM pairs used for latent heat storage in the 24 to 29°C temperature range , 2005 .

[1648]  Abul Fazal M. Arif,et al.  Laser short-pulse heating with time-varying intensity and thermal stress development in the lattice subsystem , 2005 .

[1649]  RUAN LIN,et al.  Research of the Temperature Distribution of the Hollow Conductor in the Evaporative Cooling Hydro-Generators , 2005 .

[1650]  Roger W. Ainsworth,et al.  Blade-tip heat transfer in a transonic turbine , 2005 .

[1651]  Siyoung Jeong,et al.  Optimal Design of Compact Horizontal Tube LiBr/Water Absorbers , 2005 .

[1652]  X. Q. Huang,et al.  Heat Transfer of Premixed Butane/Air Impinging Circular Flame Jet with Induced Swirl , 2005 .

[1653]  G. N. Tiwari,et al.  Empirical expressions for convective and evaporative heat transfer coefficients for the drying of concentrated sugar-cane juice , 2005 .

[1654]  Zhen-Hua Liu,et al.  Evaporative Heat Transfer of Annular Two-phase Flow of Air-water in a Small Vertical Tube , 2005 .

[1655]  Ho-Ming Yeh,et al.  Double-pass Flow Heat Transfer In A Circular Conduit By Inserting A Concentric Tube For Improved Performance , 2005 .

[1656]  Karen Vierow,et al.  Evaluation of Reflux Condensation Heat Transfer of Steam-Air Mixtures under Gas-Liquid Countercurrent Flow in a Vertical Tube , 2005 .

[1657]  M. Z. Saghir,et al.  Marangoni and Gravity Driven Convection in a Liquid Layer Overlying a Porous Layer: Lateral and Bottom Heating Conditions , 2005 .

[1658]  M. Wells,et al.  EFFECT OF WATER FLOW RATE, WATER TEMPERATURE, NOZZLE SIZE AND NOZZLE STAND-OFF DISTANCE ON THE BOILING WATER HEAT TRANSFER OF AISI 316 STAINLESS STEEL PLATE , 2005 .

[1659]  Kwang-Yong Kim,et al.  Numerical Optimization for the Design of a Spacer Grid with Mixing Vanes in a Pressurized Water Reactor Fuel Assembly , 2005 .

[1660]  Ali Tanrikut,et al.  Experimental Research on In-Tube Condensation under Steady-State and Transient Conditions , 2005 .

[1661]  B. L. Yeap,et al.  Retrofitting Crude Oil Refinery Heat Exchanger Networks to Minimize Fouling While Maximizing Heat Recovery , 2005 .

[1662]  Eric Brown,et al.  Heat transport by turbulent Rayleigh–Bénard convection in cylindrical cells with aspect ratio one and less , 2004, Journal of Fluid Mechanics.

[1663]  G. Catelani,et al.  Interaction corrections to thermal transport coefficients in disordered metals: The quantum kinetic equation approach , 2004, cond-mat/0405333.

[1664]  Suman Chakraborty,et al.  A novel modeling and simulation technique of photo-thermal interactions between lasers and living biological tissues undergoing multiple changes in phase , 2004, Comput. Biol. Medicine.

[1665]  Yamamoto Yoshinobu,et al.  白色発光ダイオード用の緑色発光β-SiAlON:Eu 2+ 粉末蛍光体に関するキャラクタリゼーションと特性 , 2005 .

[1666]  Qiulin Yu,et al.  Laminar flow cooling behavior of wide heavy-thickness coils , 2005 .

[1667]  R. Karvinen,et al.  Analytical solution for heat transfer in temperature gradient calendering , 2005 .

[1668]  John T. Berry,et al.  Solidification analysis of heat sink/chill effectiveness in permanent-mold casting of an aluminum alloy , 2005 .

[1669]  S. R. Shirsath,et al.  Ultrasonic waves for rapid heat transfer , 2005 .

[1670]  Gao Zhi.  Mechanism and simulation of external cooling in aluminum casting-rolling process , 2005 .

[1671]  Wang Wei-ming.  Numerical Simulation of Fluid Flow and Heat Transfer in a Plasma Sprayer , 2005 .

[1672]  Toshihiko Takahashi,et al.  LES and Measurement of Heat Transfer and Flow in Rectangular Channels with Crossed Angled Ribs , 2005 .

[1673]  Chin Pan,et al.  Two-phase flow instability of boiling in two parallel microchannels , 2005 .

[1674]  Richard J.T. Lin,et al.  Determination of critical material parameters for numerical simulation of acrylic sheet forming , 2005 .

[1675]  Hongmin Li,et al.  Numerical investigation on multi-hole baffle designs for industry hydrothermal synthesis of single crystals , 2005 .

[1676]  Junjie Wang,et al.  Mathematical Heat Transfer Model Research for the Improvement of Continuous Casting Slab Temperature , 2005 .

[1677]  Debes Bhattacharyya,et al.  Enhancement of convective heat transfer to polymer manufacturing molds , 2005 .

[1678]  Manabu Tanaka,et al.  Anode Heat Transfer in TIG Arc and Its Effect on Weld Penetration , 2005 .

[1679]  Leiv Kolbeinsen,et al.  Kinetics of oxygen refining process for ferromanganese alloys , 2005 .

[1680]  Noboru Shinke,et al.  Molecular dynamics study of nano-size silica melting by high heat flux , 2005 .

[1681]  KexinZhao,et al.  Simulation of inside-grooved mould improving heat transfer of original shell of casting slab , 2005 .

[1682]  L. C. Barbosa,et al.  Raman, hyperraman, hyper-Rayleigh, two-photon excited luminescence and morphology-dependent-modes in a single optical tweezers system , 2005 .

[1683]  W. Nowak,et al.  Heat transfer during transverse air flow around a cylinder , 2005 .

[1684]  Zhang Chun-wei.  Theoretical Investigation of Flow Regime for Boiling Water Two-Phase Flow in Horizontal Rectangular Narrow Channels , 2005 .

[1685]  Pan Wen.  EFFECTS OF SHROUD GAS ON LAMINAR ARGON PLASMA JETS IMPINGING ON A SUBSTRATE IN AMBIENT AIR , 2005 .

[1686]  N. Massarotti,et al.  Forced convection heat transfer from solder balls on a printed circuit board using the characteristic based split (CBS) scheme , 2005 .

[1687]  Myeong-Gie Kang.  Effects of pool subcooling on boiling heat transfer in a vertical annulus with closed bottom , 2005 .

[1688]  S. Yu. Mesnyankin.  Modern Approach to the Account of Contact Thermal Resistances in Power Plants , 2005 .

[1689]  Zhi Tao,et al.  Numerical simulation of conjugate heat and mass transfer process within cylindrical porous media with cylindrical dielectric cores in microwave freeze-drying , 2005 .

[1690]  Cha'o-Kuang Chen,et al.  Turbulent Film Condensation on an Isothermal Sphere , 2005 .

[1691]  Wenxian Lin,et al.  Long-term behavior of cooling fluid in a vertical cylinder , 2005 .

[1692]  D. Andrew S. Rees,et al.  The influence of higher order effects on the linear wave instability of vertical free convective boundary layer flow , 2005 .

[1693]  Srinath V. Ekkad,et al.  Impingement Heat Transfer, Part II: Effect of Streamwise Pressure Gradient , 2005 .

[1694]  Nathan Mendes,et al.  A method for predicting heat and moisture transfer through multilayered walls based on temperature and moisture content gradients , 2005 .

[1695]  Detlev G. Kröger,et al.  A critical investigation into the heat and mass transfer analysis of counterflow wet-cooling towers , 2005 .

[1696]  Ali J. Chamkha,et al.  Modelling Convection Heat Transfer in a Rotating Fluid in a Thermally-Stratified High-Porosity Medium: Numerical Finite Difference Solutions , 2005 .

[1697]  Sung Ki Kim,et al.  Amplification of boundary layer instability by hot wall thermal oscillation in a side heated cavity , 2005 .

[1698]  Roydon Andrew Fraser,et al.  Flow, thermal, and entropy generation characteristics inside a porous channel with viscous dissipation , 2005 .

[1699]  Shahla Mansouri,et al.  Computational modelling of unsaturated flow of liquid in heap leaching—using the results of column tests to calibrate the model , 2005 .

[1700]  Je-Chin Han,et al.  Heat Transfer in Rotating Rectangular Channels with V-Shaped and Angled Ribs , 2005 .

[1701]  Greg F. Naterer,et al.  Deterministic physical influence control of interfacial motion in thermal processing of solidified materials , 2005 .

[1702]  P. Cox,et al.  Determining the optimal soil temperature scheme for atmospheric modelling applications , 2005 .

[1703]  Roger R. Schmidt,et al.  Effect of the Location and the Properties of Thermostatic Expansion Valve Sensor Bulb on the Stability of a Refrigeration System , 2005 .

[1704]  Min-Soo Kim,et al.  Convective boiling heat transfer characteristics of CO2 in microchannels , 2005 .

[1705]  Dorin Ieşan,et al.  On the theory of heat for micromorphic bodies , 2005 .

[1706]  Giuseppe Peter Vanoli,et al.  Flow boiling heat transfer with HFC mixtures in a smooth horizontal tube. Part II: Assessment of predictive methods , 2005 .

[1707]  Shiao Lin Beh,et al.  Steady and unsteady thermal analysis of a triple stack cold plate with heat losses , 2005 .

[1708]  Bo Yu,et al.  The computed characteristics of turbulent flow and convection in concentric circular annuli. Part II. Uniform heating on the inner surface , 2005 .

[1709]  B. R. Ramaprian,et al.  Convection in modulated thermal gradients and gravity: experimental measurements and numerical simulations , 2005 .

[1710]  F. Harahap,et al.  Measurements of steady-state heat dissipation from miniaturized horizontally-based straight rectangular fin arrays , 2005 .

[1711]  M. A. Gotovskii,et al.  Enhancement of Heat Transfer in a Short Rectangular Channel with Substantial Deflection of Inlet Velocity from Axial Direction , 2005 .

[1712]  Yu. I. Machuev,et al.  Heat Transfer in a Cylindrical Air Gap for Stepwise Heat Release of the Inner Cylinder , 2005 .

[1713]  V. P. Motulevich.  Heat and Mass Transfer in the Presence of Heterogeneous Chemical Reactions , 2005 .

[1714]  Sergei Fomin,et al.  A borehole temperature during drilling in a fractured rock formation , 2005 .

[1715]  D. Astrain,et al.  Study and Optimization of the Heat Dissipater of a Thermoelectric Refrigerator , 2005 .

[1716]  L. P. Kholpanov,et al.  Fractional integro-differential analysis of heat and mass transfer , 2005 .

[1717]  Gh. Juncu,et al.  Conjugate heat/mass transfer from a circular cylinder with an internal heat/mass source in laminar crossflow at low Reynolds numbers , 2005 .

[1718]  I. A. Hassanien,et al.  Mixed-Convection Flow Adjacent to a Horizontal Surface in a Porous Medium with Variable Permeability and Surface Heat Flux , 2005 .

[1719]  Ka Kheng Tan,et al.  Predicting Marangoni convection caused by transient gas diffusion in liquids , 2005 .

[1720]  A. A. Dolinskii,et al.  Application of an Integral Method to Calculation of a Temperature Field in the Vicinity of an Oscillating Vapor Bubble , 2005 .

[1721]  B. Palm,et al.  Analysis of Annular Two-phase Flow Dynamics under Heat Transfer Conditions , 2005 .

[1722]  I. M. Kuzyaev.  Intensification of Heat and Mass Transfer Processes in the Working Channel of Extrusion Machines during Processing of Newtonian Polymer Liquids , 2005 .

[1723]  Mao-Yu Wen,et al.  Flow structures and heat transfer of swirling jet impinging on a flat surface with micro-vibrations , 2005 .

[1724]  Ioan Pop,et al.  Natural Convection from a Discrete Heater in a Square Cavity Filled with a Porous Medium , 2005 .

[1725]  S. G. Rudenko.  Numerical Study of Combined Heat Transfer in Initial Sections of High-Temperature Outlet Channels and Nozzles with Variable and Strong Injection , 2005 .

[1726]  Kuan-Ying Chen,et al.  Thermal-Fluid Characteristics of Pin-Fin Heat Sinks Cooled by Impinging Jet , 2005 .

[1727]  Omer Comakli,et al.  Performance Evaluation Criteria for Heat Exchangers Based on First Law Analysis , 2005 .

[1728]  Ching-Shung Chen.  Numerical Analysis of Heat Transfer for Steady Three-Dimensional Compressible Flow in Long Microchannels , 2005 .

[1729]  Shripad P. Mahulikar,et al.  Skin-Temperature Prediction of Aircraft Rear Fuselage with Multimode Thermal Model , 2005 .

[1730]  Ralph L. Webb,et al.  Next Generation Devices for Electronic Cooling With Heat Rejection to Air , 2005 .

[1731]  Qiang Li,et al.  Investigation on flow and heat transfer of nanofluids by the thermal Lattice Boltzmann model , 2005 .

[1732]  Michael J. Barrett,et al.  Expectations of Closed-Brayton-Cycle Heat Exchangers in Nuclear Space Power Systems , 2005 .

[1733]  Vijay K. Dhir,et al.  A Comparative Study of Cooling of High Power Density Electronics Using Sprays and Microjets , 2005 .

[1734]  Daniel Petit,et al.  Identification methods in nonlinear heat conduction. Part II: inverse problem using a reduced model , 2005 .

[1735]  Viorel Badescu,et al.  Optimal control of forced cool-down processes , 2005 .

[1736]  Zhou Qiang-tai,et al.  Experimental and analytical study on falling film absorption in smooth and chute low‐ribbed tubes , 2005 .

[1737]  Tord Karlsson,et al.  Surprising effects of combined vapour and liquid mass transfer resistances when condensing a mixture outside tube banks , 2005 .

[1738]  Rama Subba Reddy Gorla,et al.  Non-Darcy Free Convective Heat Transfer from a Plate in a Porous Medium , 2005 .

[1739]  Kevin P. Hallinan,et al.  Effects of the Liquid Polarity and the Wall Slip on the Heat and Mass Transport Characteristics of the Micro-Scale Evaporating Transition Film , 2005 .

[1740]  Yeshern Maharaj,et al.  Effects of the Darcy-Prandtl Number on the Linear Stability of Stationary Convection in Rotating Mushy Layers , 2005 .

[1741]  A. I. Bril.  Influence of Turbulence on Transfer of Thermal Radiation in Hydrogen Diffusion Flames , 2005 .

[1742]  Donald C. Price,et al.  Thermal Design of an Airborne Computer Chassis With Air-Cooled, Cast Pin Fin Coldwalls , 2005 .

[1743]  Masahiro Kawaji,et al.  Ice slurry generation involving moving parts , 2005 .

[1744]  S. Fisenko,et al.  Toward to the control system of mechanical draft cooling tower of film type , 2005 .

[1745]  Alison Ord,et al.  Theoretical and numerical analysis of large-scale heat transfer problems with temperature-dependent pore-fluid densities , 2005 .

[1746]  K. Kawaike,et al.  A Comparative Study of Two Transition Zone Models in Heat Transfer Predictions , 2005 .

[1747]  Kh K Tazmeev,et al.  Some Specific Features of Heat and Mass Transfer of Gas-Discharge Plasma with a Liquid Electrolytic Cathode , 2005 .

[1748]  A. V. Stepanov,et al.  Intensification of Radiative Heat Transfer and Development of New Types of Tube Furnaces , 2005 .

[1749]  Zeng-Yuan Guo,et al.  Field-Coordination Analysis and Numerical Study on Turbulent Convective Heat Transfer Enhancement , 2005 .

[1750]  Sunil,et al.  Thermosolutal Convection in a Ferromagnetic Fluid Saturating a Porous Medium , 2005 .

[1751]  S. A. Isaev,et al.  Enhancement of vortex heat transfer in a bundle of transverse tubes with ordered trenches , 2005 .

[1752]  N. I. Nikitenko,et al.  Mathematical simulation of heat and mass transfer, phase conversions, and shrinkage for optimization of the process of drying of thermolabile materials , 2005 .

[1753]  Antonio F. Miguel,et al.  Transient Forced Convection in an Isothermal Fluid-Saturated Porous-Medium Layer: Effective Permeability and Boundary Layer Thickness , 2005 .

[1754]  Bo Yu,et al.  The computed characteristics of turbulent flow and convection in concentric circular annuli. Part III. Alternative thermal boundary conditions , 2005 .

[1755]  Wen-Jei Yang,et al.  NUMERICAL VISUALIZATION OF TURBULENT FILM BOILING HEAT TRANSFER AND VAPOR FILM GROWTH ON HORIZONTAL ELLIPTICAL TUBES , 2005 .

[1756]  Daniel K. Harris,et al.  The heat transfer limit of step-graded metal felt heat pipe wicks , 2005 .

[1757]  Moh’d A. Al-Nimr,et al.  Effect of the Macroscopic Local Inertial Term on the Non-Newtonian Free-Convection Flow in Channels Filled with Porous Materials , 2005 .

[1758]  O. Anwar Bég,et al.  Multiparameter perturbation analysis of unsteady oscillatory magnetoconvection in porous media with heat source effects , 2005 .

[1759]  Dominique Gobin,et al.  Heat and mass transfer during solidification of a binary solution from a horizontal plate , 2005 .

[1760]  S. V. Puzach,et al.  Certain Regularities of Heat and Mass Transfer Through an Open Aperture in a Fire in the Compartment , 2005 .

[1761]  D. W. Zhou,et al.  Effect of Mesh Screen on Heat Transfer Enhancement of Impinging Jet , 2005 .

[1762]  D. Singh,et al.  Generalized relationship for determining soil electrical resistivity from its thermal resistivity , 2005 .

[1763]  Tian-Hua Wu.  The study of buoyancy influence on mean flow and heat transfer under conditions of mixed convection in annular channels , 2005 .

[1764]  Terumi Inagaki,et al.  Study on the efficiency of effective thermal conductivities on melting characteristics of latent heat storage capsules , 2005 .

[1765]  Kai Choong Leong,et al.  An experimental study of heat transfer in oscillating flow through a channel filled with an aluminum foam , 2005 .

[1766]  Daniel Petit,et al.  Identification methods in nonlinear heat conduction. Part I: Model reduction , 2005 .

[1767]  Yogendra Joshi,et al.  A Multi-Grid Based Multi-Scale Thermal Analysis Approach for Combined Mixed Convection, Conduction, and Radiation Due to Discrete Heating , 2005 .

[1768]  Srinivas Vemuri,et al.  Cost-effective techniques for enhancing heat transfer rate in steam condensation , 2005 .

[1769]  M. R. Shahnazari,et al.  Theoretical and Experimental Investigation of the Channeling Effect in Fluid Flow through Porous Media , 2005 .

[1770]  Georgy Sorokin,et al.  Experimentaland numerical investigation of liquid metal boiling in fuel subassemblies under natural circulation conditions , 2005 .

[1771]  V. B. Veselovskii.  Mathematical Modeling of Heat Transfer in Enhancement of the Heating Processes of Solid Bodies , 2005 .

[1772]  Pawan Kumar Sharma.  Simultaneous Thermal and Mass Diffusion on Three-Dimensional Mixed Convection Flow through a Porous Medium , 2005 .

[1773]  S. Jayanthi,et al.  Uniform Lateral Mass Flux on Natural-Convection Flow over a Vertical Cone Embedded in a Porous Medium Saturated with a Non-Newtonian Fluid , 2005 .

[1774]  P. V. Prosuntsov.  Parametric Identification of Thermophysical Properties of Highly Porous Partially Transparent Materials Based on the Solution of a Two-Dimensional Problem of Radiative-Conductive Heat Transfer , 2005 .

[1775]  E. K. Kalinin,et al.  IN MEMORIAM PROFESSOR GENRIKH ALEKSANDROVICH DREITSER , 2005 .

[1776]  Kiyoshi Kawaguchi,et al.  Heat Transfer and Pressure Drop Characteristics of Finned Tube Banks in Forced Convection (Comparison of Heat Transfer and Pressure Drop Characteristics of Serrated and Spiral Fins) , 2005 .

[1777]  J. Hernández,et al.  Effects of variable properties and non-uniform heating on natural convection flows in vertical channels , 2005 .

[1778]  P. Egolf,et al.  Thermodynamics and heat transfer of ice slurries , 2005 .

[1779]  Ali Akbar Merrikh,et al.  Natural Convection in Nonhomogeneous Heat-Generating Media: Comparison of Continuum and Porous-Continuum Models , 2005 .

[1780]  James A. Liburdy,et al.  Flow characteristics and heat transfer performances of a semi-confined impinging array of jets: effect of nozzle geometry , 2005 .

[1781]  Je-Chin Han,et al.  Heat Transfer in Two-Pass Rotating Rectangular Channels (AR=1:2 and AR=1:4) With 45 Deg Angled Rib Turbulators , 2005 .

[1782]  A. N. Oznobishin,et al.  Numerical solution of the radiative-transfer equation for an absorbing, emitting, and scattering medium with a complex 3-D geometry , 2005 .

[1783]  Debadi Chakraborty,et al.  Numerical prediction of flow and heat transfer in a channel in the presence of a built-in circular tube with and without an integral wake splitter , 2005 .

[1784]  M. Z. Saghir,et al.  Solutal-thermo-diffusion convection in a vibrating rectangular cavity , 2005 .

[1785]  S. V. Reznik,et al.  Experimental study of the heat transfer in porous semitransparent heat-shield materials , 2005 .

[1786]  C. Yang,et al.  Enhancement of forced-convection cooling of multiple heated blocks in a channel using porous covers , 2005 .

[1787]  S. V. Puzach,et al.  Mathematical Modeling of Heat and Mass Transfer in Fire in a Compartment of Complex Geometry , 2005 .

[1788]  Geniy V. Kuznetsov,et al.  Spatial Simulation of Heat Transfer through Protective Structures in Conditions of Heterogeneous Heat Exchange on the Boundaries , 2005 .

[1789]  Khellil Sefiane,et al.  Heat transfer enhancement in heat pipe applications using surface coating , 2005 .

[1790]  Vitor A. F. Costa,et al.  Laminar natural convection in a vertical stack of parallelogrammic partial enclosures with variable geometry , 2005 .

[1791]  S. E. Yakush,et al.  Numerical Modeling of Compartment Fires , 2005 .

[1792]  Eldo E. Ávila,et al.  A possible influence of the density of ice accretions on their heat transfer coefficient , 2005 .

[1793]  Harmindar S. Takhar,et al.  Free Convection Flow of Two Immiscible Viscous Liquids Through Parallel Permeable Beds: Use of Brinkman Equation , 2005 .

[1794]  Masahide Murakami,et al.  Experimental investigation of the film boiling heat transfer in He II: Heat transfer coefficient , 2005 .

[1795]  Sassi Ben Nasrallah,et al.  Numerical Study of the Effects of Geometric Dimensions on Liquid-Vapor Phase Change and Free Convection in a Rectangular Porous Cavity , 2005 .

[1796]  Metin Renksizbulut,et al.  Flow Past a Spinning Sphere With Surface Blowing and Heat Transfer , 2005 .

[1797]  I. E. Lobanov,et al.  Simulation of the Limiting Enhancement of Heat Transfer in Tubes by Artificial Turbulization of a Flow for Different Heat Carriers with Constant and Variable Thermophysical Properties , 2005 .

[1798]  Scott T. Huxtable,et al.  Thermal transport in nanostructured solid-state cooling devices , 2005 .

[1799]  V. V. Ris,et al.  Natural and Mixed Convection Heat Transfer of a Cooling Air in Fissile Material and Spent Fuel Storage Facilities , 2005 .

[1800]  Eric Arquis,et al.  Study of natural convection heat transfer in a finned horizontal fluid layer , 2005 .

[1801]  Cristina H. Amon,et al.  Microelectromechanical System-Based Evaporative Thermal Management of High Heat Flux Electronics , 2005 .

[1802]  P. Singh,et al.  Laminar Natural Convection Heat and Mass Transfer from a Horizontal Surface in Non-Darcy Porous Media , 2005 .

[1803]  I. A. Hassanien,et al.  Effect of Variable Permeability and Viscous Dissipation on a Non-Darcy Natural-Convection Regime with Thermal Dispersion , 2005 .

[1804]  Hans Müller-Steinhagen,et al.  New Design equations for liquid/solid fluidized bed heat exchangers , 2005 .

[1805]  S. A. Isaev,et al.  Numerical simulation of hydrodynamics and heat transfer under conditions of turbulent transverse flow past a “trench” on a plane surface , 2005 .

[1806]  Sandile S. Motsa,et al.  Radiative Heat Transfer to Magnetohydrodynamic Couette flow with Variable Wall Temperature , 2005 .

[1807]  K. N. Seetharamu,et al.  Optimization of Thermal Resistance of Stacked Micro-Channel using Genetic Algorithms , 2005 .

[1808]  Benjamin K. Tsai,et al.  Modeling Radiative Properties of Silicon with Coatings and Comparison with Reflectance Measurements , 2005 .

[1809]  Adel A. Ghoneim,et al.  Performance optimization of solar collector equipped with different arrangements of square-celled honeycomb , 2005 .

[1810]  Pei-Yuan Tzeng,et al.  NUMERICAL INVESTIGATION OF GASEOUS MICROCHANNEL FLOW IN TRANSITION REGIMES , 2005 .

[1811]  A. Greco,et al.  Flow boiling heat transfer with HFC mixtures in a smooth horizontal tube. Part I: Experimental investigations , 2005 .

[1812]  Sassi Ben Nasrallah,et al.  Hot-Wire Method for Measuring Effective Thermal Conductivity of Porous Media , 2005 .

[1813]  K. Kim,et al.  Pool boiling of saturated FC-72 on nano-porous surface , 2005 .

[1814]  V. P. Ginkin.  Porous Solid Model to Describe Heat-Mass Transfer near Phase Transition Interface in Crystal Growth from Melt Simulations , 2005 .

[1815]  Wilson F. N. Santos,et al.  Flat-Faced Leading-Edge Effects in Low-Density Hypersonic Wedge Flow , 2005 .

[1816]  B. I. Basok,et al.  Heat Conduction of a Multi-Layer Disperse Particle of Emulsion , 2005 .

[1817]  Arun S. Mujumdar,et al.  Non-iterative estimation of heat transfer coefficients using artificial neural network models , 2005 .

[1818]  Moh’d A. Al-Nimr,et al.  Validity of the Local Thermal Equilibrium Assumption in Natural Convection from a Vertical Plate Embedded in a Porous Medium , 2005 .

[1819]  F. Ampofo,et al.  Turbulent natural convection of air in a non-partitioned or partitioned cavity with differentially heated vertical and conducting horizontal walls , 2005 .

[1820]  V. N. Zverev,et al.  Heat and Mass Transfer in the Model of a Vortex Plasmachemical Reactor , 2005 .

[1821]  I. V. Chermyaninov,et al.  Light-induced heat and mass transfer of gas in a plane channel , 2005 .

[1822]  Jenq-Shing Chiou,et al.  Heat Transfer Enhancement in a Spray Evaporator , 2005 .

[1823]  Daniel Y. Kwok,et al.  An integrated study of dropwise condensation heat transfer on self-assembled organic surfaces through Fourier transform infra-red spectroscopy and ellipsometry , 2005 .

[1824]  ZHUZheng-you.  NUMERICAL SIMULATION OF FLOWS FOR SECOND-ORDER VISCOELASTIC FLUID COUPLED WITH HEAT TRANSFER BY DIFFERENTIAL QUADRATURE METHOD , 2005 .

[1825]  O. O. Mil'man,et al.  Experimental investigation of heat transfer during the natural , circulation of air in a model of an air condenser with an exhaust shaft , 2005 .

[1826]  Lu Guang-yao.  Experimental Study on Heat Transfer Characteristics of Flow in a Narrow Annular Duct , 2005 .

[1827]  Ghulam Abdul Quadir,et al.  Investigation of Steady State and Transient Thermal Management in Portable Telecommunication Product – Part 1 , 2005 .

[1828]  Zhenqian Chen,et al.  Study of heat and moisture migration properties in porous building materials , 2005 .

[1829]  F. Maseda,et al.  VALIDATION OF TEMPERATURE SIMULATION BASED ON FINITE ELEMENT ANALYSIS IN SUBSTRATES HEATED BY ELECTRIC CABLE , 2005 .

[1830]  Tim Weber,et al.  An optimized RC-network for thermally activated building components , 2005 .

[1831]  Kenan Yakut,et al.  Effects of tapes with double-sided delta-winglets on heat and vortex characteristics , 2005 .

[1832]  Detlev G. Kro¨ger,et al.  Cooling tower performance evaluation: Merkel, Poppe, and e-NTU methods of analysis , 2005 .

[1833]  Denis Flick,et al.  Heat transfer with freezing in a scraped surface heat exchanger , 2005 .

[1834]  Roger R. Schmidt,et al.  Impact of area contact between sensor bulb and evaporator return line on modular refrigeration unit : Computational and experimental , 2005 .

[1835]  Ravi Kandasamy,et al.  Application of computational fluid dynamics simulation tools for thermal characterization of electronic packages , 2005 .

[1836]  Suneet Tuli,et al.  Electro-thermal modelling and analysis for estimation of defect parameters by stepped infrared thermography , 2005 .

[1837]  Leonard L. Vasiliev,et al.  Heat pipes in modern heat exchangers , 2005 .

[1838]  Paul I. Ro,et al.  Heat transfer performance of a cooling system using vibrating piezoelectric beams , 2005 .

[1839]  Arun S. Mujumdar,et al.  A comparative study of five low Reynolds number k–ε models for impingement heat transfer , 2005 .

[1840]  Robert W. Besant,et al.  Effects of Pore Size Variations on Regenerative Wheel Performance , 2005 .

[1841]  Yasar Islamoglu,et al.  Performance prediction for non-adiabatic capillary tube suction line heat exchanger: an artificial neural network approach , 2005 .

[1842]  Qinglin Meng,et al.  Roof cooling effect with humid porous medium , 2005 .

[1843]  朱新坚,et al.  Dynamic Thermal Model and Temperature Control of Proton Exchange Membrane Fuel Cell Stack , 2005 .

[1844]  Andris Jakovics,et al.  Numerical modelling of metallurgical processes using LES , 2005 .

[1845]  G. A. Babcock.  Because Temperature Matters: Maintaining Cooling Towers , 2005 .

[1846]  Zhao,et al.  Finite Element Analysis and Linear Regression of Maximum Temperature for Inner Wall of Chimney Foundation , 2005 .

[1847]  A Tomsic,et al.  クラスタ‐表面衝突の比較研究 (H2O)1000と(SO2)1000の分子動力学シミュレーション , 2005 .

[1848]  D. Levandier,et al.  H2+(X,v+=0~15,N+=1)+Heプロトン移動反応のパルス電界イオン化光電子二次イオンコインシデンス研究 , 2005 .

[1849]  B. B. Rokhman.  A two-zone model for aerodynamics, heat-and-mass transfer processes, and combustion in the freeboard space of the furnace of a circulating fluidized-bed boiler , 2005 .

[1850]  I. E. Lobanov,et al.  The limit enhancement of heat transfer for coolants in the form of a dropping liquid with variable thermophysical properties , 2005 .

[1851]  V. A. Suslov.  The dependence of local heat-transfer coefficients under boiling on the parameters and structures of two-phase foaming aqueous solutions , 2005 .

[1852]  V. A. Suslov.  Investigation of heat transfer during boiling of spent alkaline solutions in evaporator tubes , 2005 .

[1853]  S. B. Parjane,et al.  Heat transfer: In vibro fluidized bed dryer , 2005 .

[1854]  D. S. Gertsriken,et al.  Determining the duration of mass transfer and the temperature of metal subjected to pulsed deformation , 2005 .

[1855]  A. B. Garyaev,et al.  Study of heat-carriers temperature and enthalpy distributions in condensing-type surface heat-recovery units , 2005 .

[1856]  V. A. Kurganov,et al.  Heat transfer and pressure drop in a round tube away from the inlet upon heating of gases and gas mixtures with variable properties , 2005 .

[1857]  Yin Ji.  Numerical Study of Periodically Fully Developed Convection Heat Transfer in Two Kinds of Wavy Channels , 2005 .

[1858]  Tu Guang-bei.  Experimental Investigation of Heat and Mass Transfer Performance of Metal Fill in Air-Conditioning , 2005 .

[1859]  Wang Wei-juan.  Neural Network Model for Boiling Heat Transfer of R22 and Its Alternative Refrigerants inside Horizontal Smooth Tubes , 2005 .

[1860]  JIADou-Nan,et al.  Analysis on thermophoretic deposit of fine particle on water wall of 10 MW high temperature gas-cooled reactor , 2005 .

[1861]  Hazem Ali Attia,et al.  MHD Couette Flow with Temperature Dependent Viscosity and the Ion Slip , 2005 .

[1862]  Morten Christian Melaaen,et al.  Convective Heat and Mass Transfer Modeling in Gas-Fluidized Beds , 2005 .

[1863]  C. W. Pope,et al.  Theoretical and experimental investigation of flow and heat transfer in an internally-heated naturally-ventilated space , 2005 .

[1864]  Olivier Gicquel,et al.  Experimental and numerical determination of heat release in counterflow premixed laminar flames , 2005 .

[1865]  Huai Xiulan,et al.  Experimental study on the explosive boiling in saturated liquid nitrogen , 2005 .

[1866]  P. Lund.  Sizing and applicability considerations of solar combisystems , 2005 .

[1867]  Z. Ślipek,et al.  Simulation of Heat and Moisture Transfer in the Greenhouse Substrate due to a Heating System by Buried Pipes , 2005 .

[1868]  M. Z. Saghir,et al.  Use of an axial magnetic field to suppress convection in the solvent of Ge0.98Si0.02 grown by the travelling solvent method , 2005 .

[1869]  Jinliang Xu,et al.  Static and dynamic flow instability of a parallel microchannel heat sink at high heat fluxes , 2005 .

[1870]  B. Q. Li,et al.  A mathematical model for marangoni flow and mass transfer in electrostatically positioned droplets , 2005 .

[1871]  Hüseyin Yapıcı,et al.  Numerical solutions of transient conjugate heat transfer and thermally induced stress distribution in a heated and rotating hollow disk , 2005 .

[1872]  Guobang Chen,et al.  Investigation on traveling wave thermoacoustic heat engine with high pressure amplitude , 2005 .

[1873]  Tawatchai Charinpanitkul,et al.  Prediction of gas-particle dynamics and heat transfer in a two-dimensional spouted bed , 2005 .

[1874]  Joachim Claesson,et al.  The influence of brine flow on the flow boiling refrigerant heat transfer coefficient in a compact brazed plate heat exchanger , 2005 .

[1875]  Muslikhin Hidayat.  Heat and Mass Transfer Effects in a U-Bend in Pneumatic Drying , 2005 .

[1876]  G. H. Yeoh,et al.  Thermal-Hydrodynamic Modeling of Bubbly Flows with Heat and Mass Transfer (Journal Review) , 2005 .

[1877]  Amitava De,et al.  Reliable calculations of heat and fluid flow during conduction mode laser welding through optimization of uncertain parameters , 2005 .

[1878]  Hajime Nakamura,et al.  Pressure Drop and Heat Transfer of a Rectangular Block on the Wall of Parallel Plates Channel (Effect of the Opening Ratio) , 2005 .

[1879]  Shung-Wen Kang,et al.  Performance Testing of Micro Loop Heat Pipes , 2005 .

[1880]  J. C. Cheng,et al.  Heat transfer enhancement of backward-facing step flow in a channel by using baffle installation on the channel wall , 2005 .

[1881]  Schmid,et al.  Study on an injection quantity sensor. II: Evaluation of the sensing element , 2005 .

[1882]  Borut Mavko,et al.  Hierarchic modeling of heat transfer processes in heat exchangers , 2005 .

[1883]  Matjaz Prek,et al.  Thermodynamic analysis of human heat and mass transfer and their impact on thermal comfort , 2005 .

[1884]  Dick Bedeaux,et al.  Heat, Mass and Charge Transport, and Chemical Reactions at Surfaces , 2005 .

[1885]  Hajime Noda,et al.  Development of Heatpipe-Based Remote Heatsinks for Desktop PCs , 2005 .

[1886]  A. Heitor Reis,et al.  Role of Sorption Isotherms in the Analysis of Coupled Heat and Mass Fluxes in Porous Media , 2005 .

[1887]  F. B. Tehrani,et al.  EFFECT OF GR/RE ON MIXED CONVECTION AND COMBINED MIXED CONVECTION-RADIATION HEAT TRANSFER WITHIN A VERTICAL CHANNEL WITH VARIABLE WALL TEMPERATURE , 2005 .

[1888]  Tsing-Fa Lin,et al.  Effects of jet-to-disk separation distance on the characteristics of mixed convective vortex flow in an impinging air jet confined in a cylindrical chamber , 2005 .

[1889]  Dirk Schwalm,et al.  Electrostatic ion beam trap for electron collision studies , 2005 .

[1890]  Lei Wang,et al.  An investigation of turbulent open channel flow with heat transfer by large eddy simulation , 2005 .

[1891]  Ioannis Kourakis,et al.  Discrete breather modes associated with vertical dust grain oscillations in dusty plasma crystals , 2005 .

[1892]  Ghulam Abdul Quadir,et al.  Thermal analysis of micro‐channel heat exchangers with two‐phase flow using FEM , 2005 .

[1893]  R. Pal,et al.  Cost-effective thermal isolation techniques for use on microfabricated DNA amplification and analysis devices , 2005 .

[1894]  Ricardo Martinez-Botas,et al.  Jet impingement on a dimpled surface with different crossflow schemes , 2005 .

[1895]  Alain Cloutier,et al.  CHARACTERIZATION OF HEAT AND MASS TRANSFER IN THE MAT DURING THE HOT PRESSING OF MDF PANELS , 2005 .

[1896]  H. M. Duwairi,et al.  Transient Free Convection Flow of a Micropolar Fluid Over a Vertical Surface y , 2005 .

[1897]  H. A. Attia.  The Effect of Suction and Injection on the Unsteady Flow Between two Parallel Plates with Variable Properties , 2005 .

[1898]  Subrata Roy,et al.  Hydrodynamic Study of High Speed Flow and Heat Transfer Through a Microchannel , 2005 .

[1899]  Je-Chin Han,et al.  Heat Transfer Prediction of Rotating Rectangular Channels Using Reynolds Stress Model , 2005 .

[1900]  Ekaterina Lukianova,et al.  Photothermal responses of individual cells. , 2005, Journal of biomedical optics.

[1901]  E. F. Elshehawey,et al.  Chebyshev finite difference method for MHD flow of a micropolar fluid past a stretching sheet with heat transfer , 2005, Appl. Math. Comput..

[1902]  Mohammad E. Taslim,et al.  Rib fin effects on the overall equivalent heat transfer coefficient in a rib-roughened cooling channel , 2005 .

[1903]  Ali J. Chamkha,et al.  Combined convection-radiation interaction along a vertical flat plate in a porous medium , 2005 .

[1904]  Onder Ozgener,et al.  Experimental performance analysis of a solar assisted ground-source heat pump greenhouse heating system , 2005 .

[1905]  Zhaoli Guo,et al.  Lattice Boltzmann simulation of natural convection with temperature-dependent viscosity in a porous cavity , 2005 .

[1906]  Brian G. Thomas,et al.  The use of water cooling during the continuous casting of steel and aluminum alloys , 2005 .

[1907]  Sungjun Im,et al.  Integrated Microchannel Cooling for Three-Dimensional Electronic Circuit Architectures , 2005 .

[1908]  Song Lin,et al.  Numerical study of heat pipe application in heat recovery systems , 2005 .

[1909]  Nicholas Zabaras,et al.  Using Bayesian statistics in the estimation of heat source in radiation , 2005 .

[1910]  C. Bailey,et al.  Investigation into the performance of turbulence models for fluid flow and heat transfer phenomena in electronic applications , 2004, Twentieth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (IEEE Cat. No.04CH37545).

[1911]  Xianchang Li,et al.  Mist/Steam Heat Transfer of Multiple Rows of Impinging Jets , 2005 .

[1912]  Fumiyoshi Kimura,et al.  Fluid flow and heat transfer of opposing mixed convection adjacent to vertical heated plates , 2005 .

[1913]  Jian Su,et al.  Simulation of Transient Heat Transfer of Sandwich Pipes With Active Electrical Heating , 2005 .

[1914]  Daniele Testi,et al.  Heat transfer enhancement in a vertical annulus by electrophoretic forces acting on a dielectric liquid , 2004 .

[1915]  Arun K. Saha,et al.  Unsteady RANS Simulation of Turbulent Flow and Heat Transfer in Ribbed Coolant Passages of Different Aspect Ratios , 2005 .

[1916]  D. Baillis,et al.  Radiative Heat Transfer Using Isotropic Scaling Approximation: Application to Fibrous Medium , 2005 .

[1917]  S. B. Kim,et al.  Critical Heat Flux for Downward Facing Boiling on a Coated Hemispherical Surface , 2005 .

[1918]  David P. Schmidt,et al.  An Experimental Investigation of the Influence of Gas and Solid Particle Interaction on the Heat Transfer Effectiveness of a Falling-Bed Heat Exchanger , 2005 .

[1919]  Ahmad K. Sleiti,et al.  Fluid Flow and Heat Transfer in Rotating Curved Duct at High Rotation and Density Ratios , 2005 .

[1920]  Hiroyuki Yoshikawa,et al.  Les of turbulent separated flow and heat transfer in a symmetric expansion plane channel , 2005 .

[1921]  D. Yogi Goswami,et al.  A Compact Falling Film Absorber , 2005 .

[1922]  Neven Duić,et al.  Application of the Conservative Discrete Transfer Radiation Method to a Furnace with Complex Geometry , 2005 .

[1923]  H. Steiner.  A wall heat transfer model for subcooled boiling flow , 2005 .

[1924]  Minoru Yaga,et al.  Study on flow and heat transfer of multiple impingement jets , 2005 .

[1925]  Timothy J. Rennie,et al.  NUMERICAL AND EXPERIMENTAL STUDIES OF A DOUBLE- PIPE HELICAL HEAT EXCHANGER , 2005 .

[1926]  J. Murthy,et al.  A Two-Temperature Model for Solid/Liquid Phase Change in Metal Foams , 2005 .

[1927]  K. Hanjalić,et al.  Contribution to elliptic relaxation modelling of turbulent natural and mixed convection , 2005 .

[1928]  Ya-Ling He,et al.  Some recent advances in finite volume approach and their applications in the study of heat transfer enhancement , 2005 .

[1929]  Stephan Staudacher,et al.  Modeling and Validation of the Thermal Effects on Gas Turbine Transients , 2005 .

[1930]  Kyoji Inaoka,et al.  Heat transfer and fluid flow characteristics in a swirling impinging jet , 2005 .

[1931]  B. W. Webb,et al.  Identification of appropriate source models for accurate diffusion modeling of radiative transfer in a non-absorbing foam layer , 2005 .

[1932]  Kyle J. Daun,et al.  Inverse design methods for radiative transfer systems , 2005 .

[1933]  Xianfan Xu,et al.  Radiation transfer through nanoscale apertures , 2005 .

[1934]  Pei-Xue Jiang,et al.  A Computational Study of Convection Heat Transfer to CO2 at Supercritical Pressures in a Vertical Mini Tube , 2005 .

[1935]  Z. H. Yan,et al.  Large eddy simulation of natural convection along a vertical isothermal surface , 2005 .

[1936]  Y. Maydanik,et al.  Miniature loop heat pipes - a promising means for cooling electronics , 2005, The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (IEEE Cat. No.04CH37543).

[1937]  Yoshio Yamada,et al.  Mixed convection in a horizontal square duct with local inner heating , 2005 .

[1938]  Liu Hui,et al.  Experimental study of pool boiling heat transfer of water-based magnetic fluid on a horizontal heater , 2005 .

[1939]  Sumanta Acharya,et al.  Large Eddy Simulations of Flow and Heat Transfer in Rotating Ribbed Duct Flows , 2005 .

[1940]  Hideki Yanaoka,et al.  NUMERICAL SIMULATION OF THREE-DIMENSIONAL SEPARATED FLOW AND HEAT TRANSFER AROUND STAGGERED SURFACE-MOUNTED RECTANGULAR BLOCKS IN A CHANNEL , 2005 .

[1941]  Joon Ahn,et al.  Large Eddy Simulation of Flow and Heat Transfer in a Channel Roughened by Square or Semicircle Ribs , 2005 .

[1942]  Bruno Schuermans,et al.  Thermoacoustic modeling of a gas turbine combustor equipped with acoustic dampers , 2005 .

[1943]  Phillip M. Ligrani,et al.  Nusselt Numbers and Flow Structure on and Above a Shallow Dimpled Surface Within a Channel Including Effects of Inlet Turbulence Intensity Level , 2005 .

[1944]  Remi Manceau,et al.  Predictions of flow and heat transfer in multiple-impinging jets with an elliptic-blending second-moment closure , 2005 .

[1945]  R. Martinez-Botas,et al.  Parametric Effects on Heat Transfer of Impingement on Dimpled Surface , 2005 .

[1946]  T. V. Jones,et al.  High Frequency Surface Heat Flux Imaging of Bypass Transition , 2005 .

[1947]  Ingegerd Sjöholm,et al.  The mechanisms controlling heat and mass transfer on frying of beefburgers. I. The influence of the composition and comminution of meat raw material , 2005 .

[1948]  F. J. Cunha,et al.  Measured Adiabatic Effectiveness and Heat Transfer for Blowing From the Tip of a Turbine Blade , 2005 .

[1949]  P. T. Zubkov,et al.  HEAT TRANSFER FROM THE COLD WALL OF A SQUARE CAVITY TO THE HOT ONE BY OSCILLATORY NATURAL CONVECTION , 2005 .

[1950]  K. Hashizume,et al.  Heat transfer on tube bundles embedded horizontally in a liquid-fluidized bed , 2005 .

[1951]  John R. Thome,et al.  Condensation in Plain Horizontal Tubes: Recent Advances in Modeling of Heat Transfer to Pure Fluids and Mixtures , 2005 .

[1952]  Bernard Thonon,et al.  Extruded Microchannel-Structured Heat Exchangers , 2005 .

[1953]  Moo Hwan Kim,et al.  An Experimental Study of Flow Condensation Heat Transfer Inside Circular and Rectangular Mini-Channels , 2005 .

[1954]  Xiuhan Li,et al.  Microscale boiling heat transfer in a micro-timescale at high heat fluxes , 2005 .

[1955]  Anka Petrovic,et al.  Analytical Study of Flow Regimes for Direct Contact Condensation Based on Parametrical Investigation , 2005 .

[1956]  Niel D. Crews,et al.  A hybrid CFD-mathematical model for simulation of a MEMS loop heat pipe for electronics cooling applications , 2005 .

[1957]  Michael V. Klibanov,et al.  Global uniqueness and Hölder stability for recovering a nonlinear source term in a parabolic equation , 2005 .

[1958]  Tarasankar DebRoy,et al.  Improving reliability of modelling heat and fluid flow in complex gas metal arc fillet welds—part II: application to welding of steel , 2005 .

[1959]  Krishna M. Pillai,et al.  A NUMERICAL STUDY OF NONISOTHERMAL REACTIVE FLOW IN A DUAL-SCALE POROUS MEDIUM UNDER PARTIAL SATURATION , 2004 .

[1960]  Madhumita B. Ray,et al.  HEAT TRANSFER IN MULTIPLE-TURBULENT-SLOT IMPINGING JETS OF GAS–PARTICLE SUSPENSIONS , 2004 .

[1961]  Yang Na.  DIRECT NUMERICAL SIMULATION OF TURBULENT SCALAR FIELD IN A CHANNEL WITH WALL INJECTION , 2004 .

[1962]  Alexander Movchan,et al.  Mathematical modelling of heat transfer in a catalytic reformer , 2004 .

[1963]  Ephraim M Sparrow,et al.  NUMERICAL SIMULATION OF THE RADIATIVE HEATING OF A MOVING SHEET , 2004 .

[1964]  Vinayak Eswaran,et al.  EFFECT OF CHANNEL CONFINEMENT ON THE TWO-DIMENSIONAL LAMINAR FLOW AND HEAT TRANSFER ACROSS A SQUARE CYLINDER , 2004 .

[1965]  W. Q. Tao,et al.  IMPLEMENTATION OF CLEAR ALGORITHM ON COLLOCATED GRID SYSTEM AND APPLICATION EXAMPLES , 2004 .

[1966]  T. C. Kennedy,et al.  TRANSIENT EFFECTS ON HEAT CONDUCTION IN SLIDING BODIES , 2004 .

[1967]  P. J. Coelho,et al.  ACCURATE SOLUTIONS FOR RADIATIVE HEAT TRANSFER IN TWO-DIMENSIONAL AXISYMMETRIC ENCLOSURES WITH GAS RADIATION AND REFLECTIVE SURFACES , 2004 .

[1968]  Gautham Krishnamoorthy,et al.  PARALLEL COMPUTATIONS OF RADIATIVE HEAT TRANSFER USING THE DISCRETE ORDINATES METHOD , 2004 .

[1969]  John R. Thome,et al.  Evaporation in microchannels: influence of the channel diameter on heat transfer , 2004 .

[1970]  Jean-Luc Battaglia,et al.  Thermal influence of cutting tool coatings , 2005 .

[1971]  K. P. Sandeep,et al.  Calculation of overall heat transfer coefficients in a triple tube heat exchanger , 2004 .

[1972]  Joaquín Zueco,et al.  Inverse problem of estimating time-dependent heat transfer coefficient with the network simulation method , 2004 .

[1973]  Jing Liu,et al.  New conceptual method for directly cooling the target biological tissues , 2004 .

[1974]  Cirus Aghanajafi,et al.  Transient Heat Transfer Analysis of a Layer by Considering the Effect of Radiation , 2004 .

[1975]  Magdy A. Ezzat,et al.  Heat transfer with thermal relaxation to a perfectly conducting polar fluid , 2004 .

[1976]  G. Polidori,et al.  Transient mixed convection flow instabilities in a vertical pipe , 2004 .

[1977]  W. E. Kraus,et al.  Pool boiling heat transfer of carbon dioxide on a horizontal tube , 2004 .

[1978]  Myeong-Gie Kang,et al.  Local Pool Boiling Coefficients on the Inside Surface of a Horizontal Tube , 2004 .

[1979]  Boyun Guo.  Analytical Solutions for Steady and Transient Temperatures in Oil Pipelines , 2005 .

[1980]  A. Schmidt,et al.  Numerical prediction of heat transfer between a bubbling fluidized bed and an immersed tube bundle , 2004 .

[1981]  P. Hyldgaard,et al.  Thermal transport in SiC nanostructures , 2004, cond-mat/0407122.

[1982]  Ralph Greif,et al.  Turbulent mixed convection from a large, high temperature, vertical flat surface , 2004 .

[1983]  John W. Kelton,et al.  Testing of Thermocline Filler Materials and Molten-Salt Heat Transfer Fluids for Thermal Energy Storage Systems in Parabolic Trough Power Plants , 2004 .

[1984]  Waqar A. Khan,et al.  Fluid Flow Around and Heat Transfer from Elliptical Cylinders: Analytical Approach , 2004 .

[1985]  Soon-Heung Chang,et al.  Boiling heat transfer performance and phenomena of Al2O 3-water nano-fluids from a plain surface in a pool , 2004 .

[1986]  R. S. Amano,et al.  Experimental study of R134A condensation heat transfer inside the horizontal micro-fin tubes , 2004, The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (IEEE Cat. No.04CH37543).

[1987]  Yoshiyuki Abe,et al.  Thermal management with self-rewetting fluids , 2004 .

[1988]  Francis W.H. Yik,et al.  An evaluation of the appropriateness of using overall thermal transfer value (OTTV) to regulate envelope energy performance of air-conditioned buildings , 2004 .

[1989]  Francisco J. Collado,et al.  The law of stable equilibrium and the entropy-based boiling curve for flow boiling , 2004 .

[1990]  Satoru Yamamoto.  Computation of practical flow problems with release of latent heat , 2004 .

[1991]  Seung Wook Baek,et al.  Modeling of radiative heat transfer in an axisymmetric cylindrical enclosure with participating medium , 2004 .

[1992]  I. V. Shevchuk,et al.  Rotating disk heat transfer in a fluid swirling as a forced vortex , 2004 .

[1993]  P. Mago,et al.  Frost formation and heat transfer on a cold surface in ice fog , 2004 .

[1994]  Jian Sun,et al.  Modeling and Experimental Evaluation of Passive Heat Sinks for Miniature High-Flux Photovoltaic Concentrators , 2005 .

[1995]  P. J. Hunter,et al.  Generation of an Anatomically Based Three-Dimensional Model of the Conducting Airways , 2000, Annals of Biomedical Engineering.

[1996]  Liang Zhu,et al.  Theoretical Evaluation of Contributions of Heat Conduction and Countercurrent Heat Exchange in Selective Brain Cooling in Humans , 2000, Annals of Biomedical Engineering.

[1997]  Arnaud G. Malan,et al.  Thermal characterisation of rectangular cooling shapes in heat generating mediums : A three-dimensional investigation , 2004 .

[1998]  Antonio C. M. Sousa.  Heat transfer distribution for a free/porous system with forced convection and heat generation : a numerical study , 2004 .

[1999]  Dariusz Mikielewicz,et al.  Modelling of flow boiling process in small diameter tubes , 2004 .

[2000]  Donato Aquaro,et al.  Thermal Analysis of a core catcher made of pebble bed located inside the reactor pressure vessel , 2004 .

[2001]  Shigeo Kimura,et al.  Numerical Simulation on Mixed Convection in a Porous Medium Heated by a Vertical Cylinder , 2004 .

[2002]  Daisuke Matsuura,et al.  Steam absorption process of water/LiBr system inside vertical small bore pipes , 2005 .

[2003]  Zeyuan Xu,et al.  Experimental Study of the Flow and Thermal Development of a Row of Cooling Jets Impinging on a Rotating Concave Surface , 2004 .

[2004]  Forrest E. Ames,et al.  Turbulent Augmentation of Internal Convection Over Pins in Staggered Pin Fin Arrays , 2004 .

[2005]  N. Selçuk,et al.  Transient simulation of radiating flows , 2004 .

[2006]  S. Wittig,et al.  Surface Roughness Effects on External Heat Transfer of a HP Turbine Vane , 2004 .

[2007]  Jae Min Hyun,et al.  Transient buoyant convection in a porous-medium enclosure by sudden imposition of gravity , 2005 .

[2008]  Ahmed Kovacevic,et al.  Numerical analysis of heat transfer and fluid flow in rotary regenerative air pre-heaters , 2004 .

[2009]  Brane Širok,et al.  Numerical computation of turbulent conjugate heat transfer in air heater , 2004 .

[2010]  Laura Schaefer,et al.  Numerical Simulation of Heat Transfer and Fluid Flow of a Flat-Tube High Power Density Solid Oxide Fuel Cell , 2004 .

[2011]  D. W. Zhou.  A novel concept for boiling heat transfer enhancement , 2004 .

[2012]  Borut Mavko,et al.  Simulation of Void Fraction Profile Evolution in Subcooled Nucleate Boiling in a Vertical Annulus with a Bubble-Tracking Model , 2004 .

[2013]  Eugene F. Adiutori.  An improved form for natural convection heat transfer correlations , 2004 .

[2014]  Borut Mavko,et al.  THE GALERKIN METHOD SOLUTION OF THE CONJUGATE HEAT TRANSFER PROBLEMS FOR THE CROSS-FLOW CONDITIONS , 2004 .

[2015]  Antonio F. Miguel,et al.  Analysis of loop heat pipe performance under varying wick load , 2004 .

[2016]  Francis-Paul E.M. Janssen,et al.  Numerical Simulation of Scalp Cooling to Prevent Chemotherapy-Induced Alopecia. , 2004 .

[2017]  B. Šarler,et al.  Application of Meshless Methods for Thermal Analysis , 2004 .

[2018]  Bernhard Weigand,et al.  The Transient Liquid Crystal Technique: Influence of Surface Curvature and Finite Wall Thickness , 2004 .

[2019]  Julián Fernández Bonder,et al.  Uniqueness of Limit Solutions to a Free Boundary Problem from Combustion , 2004, SIAM J. Math. Anal..

[2020]  Matthew S. Dargusch,et al.  Development of a non intrusive heat transfer coefficient gauge and its application to high pressure die casting , 2005 .

[2021]  Y. Asako,et al.  Effect of Compressibility on Gaseous Flows in a Micro-Tube , 2005 .

[2022]  Yasuyuki Takata,et al.  Numerical simulation of heat and fluid flow in basic pulse tube refrigerator , 2005 .

[2023]  Yogendra Joshi,et al.  Boiling Performance of Single-Layered Enhanced Structures , 2005 .

[2024]  Patrick E. Phelan,et al.  An Effective Unit Cell Approach to Compute the Thermal Conductivity of Composites With Cylindrical Particles , 2005 .

[2025]  Sung Jin Kim,et al.  Study on the Transient Characteristics of the Sensor Tube of a Thermal Mass Flow Meter , 2005 .

[2026]  Bahareh Behkam,et al.  Thermal property measurement of thin aluminum oxide layers for giant magnetoresistive (GMR) head applications , 2005 .

[2027]  Chen Li,et al.  Development of a high performance heat sink based on screen-fin technology , 2003, Ninteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium, 2003..

[2028]  Jorge I. Hernández,et al.  Study of a Solar Booster Assisted Ejector Refrigeration System With R134a , 2005 .

[2029]  S. Ito,et al.  Studies of Heat Pumps Using Direct Expansion Type Solar Collectors , 2005 .

[2030]  Simon Furbo,et al.  Smart solar tanks for small solar domestic hot water systems , 2005 .

[2031]  Luciano Castillo,et al.  Transpired Turbulent Boundary Layers Subject to Forced Convection and External Pressure Gradients , 2003 .

[2032]  Povilas Poskas,et al.  Local turbulent opposing mixed convection heat transfer in inclined flat channel for stably stratified airflow , 2003 .

[2033]  Chad Bower,et al.  Heat Transfer in Water-Cooled Silicon Carbide Milli-Channel Heat Sinks for High Power Electronic Applications , 2003 .

[2034]  Ricardo Martinez-Botas,et al.  Film cooling characteristics of a single round hole at various streamwise angles in a crossflow: Part I effectiveness , 2003 .

[2035]  Ephraim M Sparrow,et al.  A DOS-Enhanced Numerical Simulation of Heat Transfer and Fluid Flow Through an Array of Offset Fins With Conjugate Heating in the Bounding Solid , 2003 .

[2036]  R. E. Simons,et al.  An Assessment of Module Cooling Enhancement With Thermoelectric Coolers , 2003 .

[2037]  Dong Liu,et al.  Analysis and Optimization of the Thermal Performance of Microchannel Heat Sinks , 2003 .

[2038]  A. E. Bergles,et al.  On the Nature of Critical Heat Flux in Microchannels , 2003 .

[2039]  Fabio Gori,et al.  Cooling of a Finned Cylinder by a Jet Flow of Air , 2005 .

[2040]  T. Wang,et al.  Multiple Flow Patterns and Heat Transfer in Confined Jet Impingement , 2005 .

[2041]  Jeong-Seob Shin,et al.  Condensation Heat Transfer of R22 and R410A in Horizontal Smooth and Microfin Tubes , 2005 .

[2042]  Chiaming Yen,et al.  The selection of optimal cooling parameters for the multi-cavity die , 2002 .

[2043]  Minoru Yaga,et al.  Heat transfer enhancement in duct with blunt body inserted close to its wall , 2005 .

[2044]  William P. Winfree,et al.  Diffusion-based thermal tomography , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[2045]  Lamyaa A. El-Gabry,et al.  Experimental Investigation of Local Heat Transfer Distribution on Smooth and Roughened Surfaces Under an Array of Angled Impinging Jets , 2001, Heat Transfer: Volume 5 — Computational, Aerospace and Environmental Heat Transfer.

[2046]  T. Suzuki,et al.  On thermal convection between two coaxial square containers inclined by 45° , 2001 .

[2047]  Eugenio Oñate,et al.  Numerical aerodynamic analysis of large buildings using a finite element model with application to a telescope building , 2019 .

[2048]  Y. Lam,et al.  Simulation of polymer removal from a powder injection molding compact by thermal debinding , 2002 .

[2049]  Yong Tae Kang,et al.  Heat exchanger design effect on the system performance of silica gel adsorption refrigeration systems , 2000 .

[2050]  Nobuyuki Imaishi,et al.  Thermocapillary flow in an annular liquid layer painted on a moving fiber , 2000 .

[2051]  Chi-Chuan Wang,et al.  An experimental study of the airside performance of the superslit fin-and-tube heat exchangers , 2000 .

[2052]  C. V. Madhusudana,et al.  Gap conductance in contact heat transfer , 2000 .

[2053]  Chie Gau,et al.  Flow and impingement cooling heat transfer along triangular rib-roughened walls , 2000 .

[2054]  G. Álvarez,et al.  Numerical heat transfer in a cavity with a solar control coating deposited to a vertical semitransparent wall , 2000 .

[2055]  Yutaka Asako,et al.  Fire resistance test for fire protection materials with high water content , 2000 .

[2056]  Adrienne S. Lavine,et al.  An exact solution for surface temperature in down grinding , 2000 .

[2057]  P. Kvadsheim,et al.  Cutaneous heat flux models do not reliably predict metabolic rates of marine mammals. , 2000, Journal of theoretical biology.

[2058]  Richard D. Averitt,et al.  Spin–lattice interaction in colossal magnetoresistance manganites , 2000 .

[2059]  David Deming,et al.  Thermal buffering of sedimentary basins by basement rocks: implications arising from numerical simulations , 2000, Petroleum Geoscience.

[2060]  T. Seo,et al.  Experimental investigation of heat transfer enhancement in a circular duct with circumferential fins and circular disks , 2000 .

[2061]  Dong Liu,et al.  Cluster dynamics and fictitious boiling in microchannels , 2000 .

[2062]  Alexander J. White,et al.  Numerical investigation of condensing steam flow in boundary layers , 2000 .

[2063]  K. Gasljevic,et al.  Buoyancy effects on heat transfer and temperature profiles in horizontal pipe flow of drag-reducing fluids , 2000 .

[2064]  Giampietro Fabbri,et al.  Heat transfer optimization in corrugated wall channels , 2000 .

[2065]  Nobuyuki Imaishi,et al.  Three-dimensional numerical simulation of rotating spoke pattern in an oxide melt under a magnetic field , 2000 .

[2066]  Marc Prat,et al.  Gas cluster growth by solute diffusion in porous media. Experiments and automaton simulation on pore network , 2000 .

[2067]  Vincent Goetz,et al.  Rotary system for the continuous production of cold by solid–gas sorption: modeling and analysis of energy performance , 2000 .

[2068]  Joo-Sik Yoo,et al.  Effect of viscous plane stagnation flow on the freezing of fluid , 2000 .

[2069]  B. K. Rao.  Heat transfer to non-Newtonian flows over a cylinder in cross flow , 2000 .

[2070]  Ali J. Chamkha.  Unsteady laminar hydromagnetic fluid–particle flow and heat transfer in channels and circular pipes , 2000 .

[2071]  Shinnosuke Obi,et al.  Heat transfer experiments in rotating boundary layer flow , 2000 .

[2072]  Man Yeong Ha,et al.  A numerical study on three-dimensional conjugate heat transfer of natural convection and conduction in a differentially heated cubic enclosure with a heat-generating cubic conducting body , 2000 .

[2073]  J. Rogez,et al.  High temperature contact conductance measurement across cylindrical joint by the periodic method: feasibility and first results , 2000 .

[2074]  A. Bejan,et al.  Cylindrical trees of pin fins , 2000 .

[2075]  Sehyun Shin,et al.  Thermal conductivity of suspensions in shear flow fields , 2000 .

[2076]  Stephen F. Benjamin,et al.  Warm up of an automotive catalyst substrate by pulsating flow: a single channel modelling approach , 2000 .

[2077]  P. L. Betts,et al.  Experiments on turbulent natural convection in an enclosed tall cavity , 2000 .

[2078]  Randall Osczevski,et al.  Windward Cooling: An Overlooked Factor in the Calculation of Wind Chill , 2000 .

[2079]  Yong Tae Kang,et al.  The Effect of Fluid Property Variations on Heat Transfer, in Annulus Side of a Spirally Fluted Tube , 2000 .

[2080]  Nicholas J. Hills,et al.  Discharge coefficients for flow through holes normal to a rotating shaft , 2000 .

[2081]  R König,et al.  Frontiers in refrigeration and cooling: how to obtain and sustain ultralow temperatures beyond nature's ambience , 2000 .

[2082]  Xiaofeng Peng,et al.  Nucleation site interaction during boiling , 2000 .

[2083]  K. Murugesan,et al.  Transient response of multipass plate heat exchangers with axial thermal dispersion in fluid , 2000 .

[2084]  Xiaofeng Peng,et al.  On the effect of thermocapillarity for falling liquid film flow with consideration of humidity condition , 2000 .

[2085]  Chang Nyung Kim,et al.  Numerical analysis of plume characteristics and liquid circulation in gas injection through a porous plug , 2000 .

[2086]  Tae Beom Seo,et al.  Estimation of heat losses from the receivers for solar energy collecting system of Korea Institute of Energy Research , 2000 .

[2087]  Min Chan Kim,et al.  Ionic mass transport correlation of double-diffusive convection in horizontal fluid layers , 2000 .

[2088]  Fernando L.P. Pessoa,et al.  The influence of heat exchanger design on the synthesis of heat exchanger networks , 2000 .

[2089]  Yi Lu Murphey,et al.  Thermal modeling of controlled atmosphere brazing process using virtual reality technology , 2000 .

[2090]  F. J. Erbacher,et al.  Passive containment cooling by natural air convection and thermal radiation after severe accidents , 2000 .

[2091]  S. Klein,et al.  Refrigeration System Performance using Liquid-Suction Heat Exchangers , 2000 .

[2092]  Anne-Lucie Raoult-Wack,et al.  Immersion chilling and freezing of a porous medium , 2000 .

[2093]  Harry A. Dwyer,et al.  Heat and Mass Transfer during Microwave Steam Treatment of Contaminated Soils , 2000 .

[2094]  Tetsuji Noda,et al.  The behavior of coatings and SiCf/SiC composites under thermal shock , 2000 .

[2095]  Hitoshi Habuka,et al.  Thermal Conditions in Rapid Thermal Processing System Using Circular Infrared Lamp , 2000 .

[2096]  F. Escourbiac,et al.  Infrared characterization and high heat flux testing of plasma sprayed layers , 2000 .

[2097]  Bourhan Tashtoush,et al.  Natural losses from vegetable and fruit products in cold storage , 2000 .

[2098]  Stephen M. Bajorek,et al.  Direct-Contact Heat Transfer Model for Dispersed-Flow Film Boiling , 2000 .

[2099]  Pierre Proulx,et al.  Mathematical Modeling of Silica Anode Decomposition , 2000 .

[2100]  Hag-Ju Cho,et al.  Analysis of Radiative Heat Transfer and Mass Transfer during Multiwafer Low‐Pressure Chemical Vapor Deposition , 2000 .

[2101]  R. Michael Banish,et al.  Real-time determination of thermal diffusivity in a disk-shaped sample: Applications to graphite and boron nitride , 2000 .

[2102]  Ryosuke Matsumoto,et al.  Natural convection in a vertical rectangular enclosure with localized heating and cooling zones , 2000 .

[2103]  W. Lischke,et al.  Heat transfer in horizontal tubes during two phase natural circulation with presence of noncondensing gas , 2000 .

[2104]  Bekir Sami Yilbas,et al.  Conjugate heat transfer in fully developed laminar pipe flow and thermally induced stresses , 2000 .

[2105]  Yang Liu,et al.  An optimum spacing problem for four chips on a horizontal substrate – mixed convection , 2000 .

[2106]  Yi Qin,et al.  A method for the simulation of temperature stabilisation in the tools during multi-cycle cold-forging operations , 2000 .

[2107]  Weng-Sing Hwang,et al.  Mathematical Modeling of Fluid Flow Phenomena during Tundish Filling and Subsequent Initial Casting Operation in Steel Continuous Casting Process , 2000 .

[2108]  Kang Y. Huh,et al.  Prediction of Transient Slab Temperature Distribution in the Re-heating Furnace of a Walking-beam Type for Rolling of Steel Slabs , 2000 .

[2109]  Wen-Qiang Lu,et al.  Boundary element analysis of the heat transfer in Bridgman growth process of semi-transparent crystals , 2000 .

[2110]  Vishwanath Prasad,et al.  Microscale heat and mass transfer and non-equilibrium phase change in rapid solidification , 2000 .

[2111]  Gerardo Trapaga,et al.  Modeling of a DC electric arc furnace - Heat transfer from the arc , 2000 .

[2112]  Ya Li.  Thermal properties of NbTi superconductor wire and its heat release performance over quench , 2000 .

[2113]  Pär Jönsson,et al.  Heating and Electromagnetic Stirring in a Ladle Furnace-A Simulation Model , 2000 .

[2114]  Maria A. Founti,et al.  The discrete transfer radiation model in a natural gas‐fired furnace , 2000 .

[2115]  Chuguang Zheng,et al.  A FAST ALGORITHM FOR CALCULATION OF RADIATIVE ENERGY DISTRIBUTIONS RECEIVED BY PINHOLE IMAGE-FORMATION PROCESS FROM 2D RECTANGULAR ENCLOSURES , 2000 .

[2116]  Mamoru Ishii,et al.  Development of the Miniaturized Four-sensor Conductivity Probe and the Signal Processing Scheme , 2000 .

[2117]  Roger E. Khayat,et al.  A LOW-DIMENSIONAL APPROACH FOR LINEAR AND NONLINEAR HEAT CONDUCTION IN PERIODIC DOMAINS , 2000 .

[2118]  Chang Shu,et al.  AN EFFICIENT APPROACH TO SIMULATE NATURAL CONVECTION IN ARBITRARILY ECCENTRIC ANNULI BY VORTICITY-STREAM FUNCTION FORMULATION , 2000 .

[2119]  J. E. Hesselgreaves.  Rationalisation of second law analysis of heat exchangers , 2000 .

[2120]  Donald A. Nield,et al.  Effects of heterogeneity in forced convection in a porous medium: parallel plate channel or circular duct , 2000 .

[2121]  Myeong-Gie Kang.  Effect of surface roughness on pool boiling heat transfer , 2000 .

[2122]  Cheng-Hung Huang,et al.  A two-dimensional inverse problem in imaging the thermal conductivity of a non-homogeneous medium , 2000 .

[2123]  T. C Hua,et al.  Quenching boiling in subcooled liquid nitrogen for solidification of aqueous materials , 2000 .

[2124]  Hirokazu Tanaka,et al.  Measurements of IR Spectra and Thermophysical Properties of Tetragonal Zirconia by Thermal Radiation Calorimetry , 2000 .

[2125]  Kambiz Vafai,et al.  Buoyancy-driven flow and heat transfer in open-ended enclosures: elimination of the extended boundaries , 2000 .

[2126]  Jan Siegel,et al.  Delayed melting at the substrate interface of amorphous Ge films partially melted with nanosecond laser pulses , 2000 .

[2127]  Subrata Roy,et al.  NUMERICAL INVESTIGATION OF THE BLADE COOLING EFFECT GENERATED BY MULTIPLE JETS ISSUING AT AN ANGLE INTO AN INCOMPRESSIBLE HORIZONTAL CROSSFLOW , 2000 .

[2128]  Raja Nassar,et al.  A HYBRID FINITE ELEMENT-FINITE DIFFERENCE METHOD FOR SOLVING THREE-DIMENSIONAL HEAT TRANSPORT EQUATIONS IN A DOUBLE-LAYERED THIN FILM WITH MICROSCALE THICKNESS , 2000 .

[2129]  T. H. Hsu,et al.  MIXED CONVECTION IN A RECTANGULAR ENCLOSURE WITH DISCRETE HEAT SOURCES , 2000 .

[2130]  Kang Y. Huh,et al.  THREE-DIMENSIONAL ANALYSIS OF THE WALKING-BEAM-TYPE SLAB REHEATING FURNACE IN HOT STRIP MILLS , 2000 .

[2131]  S. Cheroto,et al.  Integral transform for periodic laminar forced convection in simultaneously developing flow , 2000 .

[2132]  Edward Ng,et al.  HEAT AND FLOW EVALUATION IN ROTATING CIRCULAR DISKS PASSAGE WITH A CFD APPROACH , 2000 .

[2133]  Yong Zhao,et al.  A high-order characteristics upwind FV method for incompressible flow and heat transfer simulation on unstructured grids , 2000 .

[2134]  J. R. Quispe,et al.  Simulation of turbulent flows in an impingement dryer by an extended κ–ε model , 2000 .

[2135]  Roger C. Reed,et al.  On the formation of a centreline grain boundary during fusion welding , 2000 .

[2136]  Dirk Olbers,et al.  The theory of three-dimensional hetons and vortex-dominated spreading in localized turbulent convection in a fast rotating stratified fluid , 2000, Journal of Fluid Mechanics.

[2137]  J. Chung,et al.  Linear stability analysis of mixed-convection flow in a vertical pipe , 2000, Journal of Fluid Mechanics.

[2138]  M. Jalali-Heravi,et al.  Prediction of thermal conductivity detection response factors using an artificial neural network. , 2000, Journal of chromatography. A.

[2139]  Uday B. Desai,et al.  Application of mathematical morphology in measurement of droplet size distribution in dropwise condensation , 2000 .

[2140]  Suresh G. Advani,et al.  Numerical simulation of crystallization in high density polyethylene extrudates , 2000 .

[2141]  Mica Grujicic,et al.  Multi-length scale modeling of CVD of diamond Part I A combined reactor-scale/atomic-scale analysis , 2000 .

[2142]  M. Dalle Donne,et al.  Measurement of the Heat Transfer Parameters in Infiltrated Binary Beryllium Beds: Comparison between the Results with PEHTRA and SUPER-PETRA , 2000 .

[2143]  M. Dalle Donne,et al.  Experimental Investigations on the Thermal and Mechanical Behavior of Single Size Beryllium Pebble Beds , 2000 .

[2144]  Giampietro Fabbri.  Effect of Nonuniformities in Vapor Saturation Pressure and Coolant Velocity on Noncondensable Contaminant Accumulation in Single-Pass Air-Cooled Condensers , 2000 .

[2145]  Dongqing Li,et al.  Heat transfer for water flow in trapezoidal silicon microchannels , 2000 .

[2146]  S. C. Gupta,et al.  Pool Boiling of Distilled Water on PTFE-Coated Heating Tube , 2000 .

[2147]  Peiwen Li,et al.  Theoretical Analysis and Experimental Investigation on Local Heat Transfer Characteristics of HFC-134a Forced-Convection Condensation inside Smooth Horizontal Tubes , 2000 .

[2148]  Hans Müller-Steinhagen,et al.  Heat Transfer to Kraft Black Liquor in a Liquid?Solid Fluidized Bed , 2000 .

[2149]  Dayong Gao,et al.  Combined electromagnetic and heat-conduction analysis of rapid rewarming of cryopreserved tissues , 2000 .

[2150]  Jennifer X. Wen,et al.  Investigation of a spectral formulation for radiative heat transfer in one-dimensional fires and combustion systems , 2000 .

[2151]  Vijay Modi,et al.  High Schmidt mass transfer in a laminar impinging slot jet flow , 2000 .

[2152]  V. W. Goldschmidt,et al.  Fin heat transfer modeling and its impact on predictions of efficiency and condensation in gas-fired boilers , 2000 .

[2153]  K. Katoh,et al.  Heat-transfer enhancement and pressure loss by surface roughness in turbulent channel flows , 2000 .

[2154]  W.W.M. Siu,et al.  Effective conductivity computation of a packed bed using constriction resistance and contact angle effects , 2000 .

[2155]  Moh'd Abu-Qudais,et al.  Entropy generation due to laminar forced convection flow past a parabolic cylinder , 2000 .

[2156]  G. Kaltsas,et al.  Porous Silicon as an Effective Material for Thermal Isolation on Bulk Crystalline Silicon , 2000 .

[2157]  Tim Ameel,et al.  Parallel-Flow Heat Exchangers with Ambient Thermal Interaction , 2000 .

[2158]  P. Kandaswamy,et al.  Double diffusive nonlinear convection in a square cavity , 2000 .

[2159]  Wojciech Zalewski,et al.  Optimization of evaporative fluid coolers , 2000 .

[2160]  D. Maillet,et al.  Effect of a thin layer on the measurement of the thermal diffusivity of a material by a flash method , 2000 .

[2161]  Michael Wilson,et al.  Natural convection flow from a vertical permeable flat plate with variable surface temperature and species concentration , 2000 .

[2162]  Demos P. Georgiou,et al.  Useful work and the thermal efficiency in the ideal Lenolr cycle with regenerative preheating , 2000 .

[2163]  Eugênio Spanó Rosa,et al.  Statistical method to calculate local interfacial variables in two-phase bubbly flows using intrusive crossing probes , 2000 .

[2164]  James E. O'Brien,et al.  Heat Transfer Enhancement for Finned-Tube Heat Exchangers With Winglets , 2000, Advances in Enhanced Heat Transfer.

[2165]  Masanori Monde,et al.  Analytical method in inverse heat transfer problem using laplace transform technique , 2000 .

[2166]  David S. Weaver,et al.  An improved void fraction model for two-phase cross-flow in horizontal tube bundles , 2000 .

[2167]  Jam Hans Kuipers,et al.  The volume of fluid method in spherical coordinates , 2000 .

[2168]  Yue-Tzu Yang,et al.  The inverse estimation of the thermal boundary behavior of a heated cylinder normal to a laminar air stream , 2000 .

[2169]  Thomas F. Irvine,et al.  Laminar conjugated forced convection heat transfer in curved rectangular channels , 2000 .

[2170]  J. Rubinstein,et al.  A fluid and heat flow problem arising in the soup-canning industry , 2000 .

[2171]  Douglas L. Sondak,et al.  Simulation of Coupled Unsteady Flow and Heat Conduction in Turbine Stage , 2000 .

[2172]  Renato Machado Cotta,et al.  Integral transform solutions of transient natural convection in enclosures with variable fluid properties , 2000 .

[2173]  R. C. Mehta.  Heat transfer study of high speed flow over a spiked blunt body , 2000 .

[2174]  Bourhan Tashtoush,et al.  Analytical Solution for the Effect of Viscous Dissipation on Mixed Convection in Saturated Porous Media , 2000 .

[2175]  W. H. Leong,et al.  Thermal Conductivity of Soils at Very Low Moisture Content and Moderate Temperatures , 2000 .

[2176]  Neil Hopkinson,et al.  Predicting stereolithography injection mould tool behaviour using models to predict ejection force and tool strength , 2000 .

[2177]  Chris T. Kiranoudis,et al.  Numerical simulation of air flow field in single-sided ventilated buildings , 2000 .

[2178]  Mario A. Medina,et al.  On the performance of radiant barriers in combination with different attic insulation levels , 2000 .

[2179]  Rafael Colás,et al.  Calculation of thermal crowning in work rolls from their cooling curves , 2000 .

[2180]  Carmen Riverol,et al.  Nonlinear control of an evaporator using an error trajectory technique , 2000 .

[2181]  Simon J. Rees,et al.  A Model for Simulating the Performance of a Pavement Heating System as a Supplemental Heat Rejecter With Closed-Loop Ground-Source Heat Pump Systems , 2000 .

[2182]  Takeo S. Saitoh,et al.  Close-Contact Melting Inside an Elliptical Cylinder , 2000 .

[2183]  Greg Barker,et al.  Performance of a Large Parabolic Trough Solar Water Heating System at Phoenix Federal Correctional Institution , 2000 .

[2184]  M. H. Adjali,et al.  In-situ measurements and numerical simulation of heat transfer beneath a heated ground floor slab , 2000 .

[2185]  David Ian Wilson,et al.  Enhanced cleaning of whey protein soils using pulsed flows , 2000 .

[2186]  Teizo Kitagawa,et al.  Construction of Novel Nanosecond Temperature Jump Apparatuses Applicable to Raman Measurements and Direct Observation of Transient Temperature , 2000 .

[2187]  Ahmed M Abdel-latif.  An experimental investigation of fluid flow and combustion characteristics of dual-fuel in a cylindrical combustion chamber , 2000 .

[2188]  Da-Wen Sun,et al.  CFD simulation of heat and moisture transfer for predicting cooling rate and weight loss of cooked ham during air-blast chilling process , 2000 .

[2189]  Mitsuhiro Ohta,et al.  CHARACTERISTICS OF HEAT TRANSFER FROM A SPHERICAL SOLID BODY UNDER PULSATING FORCED CONVECTION , 2000 .

[2190]  Yunfei Dai,et al.  Experimental investigation of a solar desalination unit with humidification and dehumidification , 2000 .

[2191]  Samuel M. Sami,et al.  Prediction of two-phase condensation characteristics of some alternatives to R-22 inside air/refrigerant enhanced surface tubing , 2000 .

[2192]  Steven R. Evett,et al.  Soil temperature and water evaporation of small steel and plastic lysimeters replaced daily. , 2000 .

[2193]  M. Prakash,et al.  CFD MODELLING OF NATURAL CONVECTION HEAT AND MASS TRANSFER IN HYGROSCOPIC POROUS MEDIA , 2000 .

[2194]  M. A. Lara,et al.  DETERMINATION OF MASS DIFFUSIVITY COEFFICIENT OF SWEET POTATO , 2000 .

[2195]  Giacomo M. Bisio,et al.  Heat transfer, energy saving and pollution control in UHP electric-arc furnaces , 2000 .

[2196]  Joachim Werther,et al.  INFLUENCE OF THE PARTICLE SIZE AND SUPERFICIAL GAS VELOCITY ON THE SUBLIMATION OF PURE SUBSTANCES IN FLUIDIZED BEDS OF DIFFERENT SIZES , 2000 .

[2197]  Scott A. Wells,et al.  A general model of the activated sludge reactor with dispersive flow- I. Model development and parameter estimation , 2000 .

[2198]  Theodore Motyka,et al.  Hydrogen storage for fuel cell systems with stationary applications— I. Transient measurement technique for packed bed evaluation , 2000 .

[2199]  G. W. Young,et al.  A mathematical model of the edge-defined film-fed growth process , 2000 .

[2200]  G. Labrosse,et al.  A FIRST INCURSION INTO THE 3D STRUCTURE OF NATURAL CONVECTION OF AIR IN A DIFFERENTIALLY HEATED CUBIC CAVITY, FROM ACCURATE NUMERICAL SOLUTIONS , 2000 .

[2201]  Yaşar Demirel.  Thermodynamic analysis of thermomechanical coupling in Couette flow , 2000 .

[2202]  Raffaele Savino,et al.  Influence of buoyancy forces on Marangoni flow instabilities in liquid bridges , 2000 .

[2203]  L. Namli,et al.  Laminar natural convection in a pitched roof of triangular cross-section: summer day boundary conditions , 2000 .

[2204]  Mounir B. Ibrahim,et al.  Experimental and Computational Investigations of Phase Change Thermal Energy Storage Canisters , 2000 .

[2205]  B D Levine,et al.  Effects of whole body heating on dynamic baroreflex regulation of heart rate in humans. , 2000, American journal of physiology. Heart and circulatory physiology.

[2206]  B W Raaymakers,et al.  How to apply a discrete vessel model in thermal simulations when only incomplete vessel data are available. , 2000, Physics in medicine and biology.

[2207]  Yuriko Renardy,et al.  Time-dependent pattern formation for convection in two layers of immiscible liquids , 2000 .

[2208]  Bohdan Mochnacki,et al.  Application of the boundary element method for the numerical modelling of the solidification of cylindrical and spherical castings , 2000 .

[2209]  Haim Kalman,et al.  Model for dilute gas–particle flow in constant-area lance with heating and friction , 2000 .

[2210]  Christophe Menezo,et al.  Adaptation of the balanced realization to the coupling of reduced order models for the modelling of the thermal behavior of buildings , 2000 .

[2211]  B. G. Lakatos,et al.  Modelling heat transfer between solid particles , 2000 .

[2212]  Maria da Graça Carvalho,et al.  Flexibly using results of CFD and simplified heat transfer model for pulverized coal-fired boilers , 2000 .

[2213]  Alan Williams,et al.  Combustion of methane in catalytic honeycomb monolith burners , 2000 .

[2214]  N. Anantharaman,et al.  Fluidised bed drying of agro products , 2000 .

[2215]  A. Krivchikov,et al.  Thermal conductivity of solid krypton with methane admixture , 2000 .

[2216]  Amir Faghri,et al.  Thermal modeling of selective area laser deposition of titanium nitride on a finite slab with stationary and moving laser beams , 2000 .

[2217]  Alan R. Kerstein,et al.  Simulation of vertical slot convection using 'one-dimensional turbulence' , 2000 .

[2218]  Jay I. Frankel,et al.  Design and control of interfacial temperature gradients in solidification , 2000 .

[2219]  Emanuel Negrão Macêdo,et al.  Forced convection in thermally developing turbulent flow of drag-reducing fluids within circular tubes , 2000 .

[2220]  Kim Tiow Ooi,et al.  A study of multiple heat sources on a flat plate heat pipe using a point source approach , 2000 .

[2221]  Sophie Didierjean,et al.  Thermal dispersion in porous media: one-equation model , 2000 .

[2222]  Jonathan Rose,et al.  Accurate approximate equations for intensive sub-sonic evaporation , 2000 .

[2223]  A. Vakakis,et al.  Axisymmetric transient solutions of the heat diffusion problem in layered composite media , 2000 .

[2224]  Vitor A. F. Costa,et al.  Heatline and massline visualization of laminar natural convection boundary layers near a vertical wall , 2000 .

[2225]  Yong Li,et al.  Discrete-phase simulation of single bubble rise behavior at elevated pressures in a bubble column , 2000 .

[2226]  W. Hallett,et al.  A numerical model for packed-bed combustion of char particles , 2000 .

[2227]  Muzeyyen Dogan,et al.  Determination of diffusion coefficient-vapor pressure product of some liquids from hanging drop evaporation , 2000 .

[2228]  S. Mao,et al.  Initiation of an early-stage plasma during picosecond laser ablation of solids , 2000 .

[2229]  Graham T. Roberts,et al.  High-speed flow with discontinuous surface catalysis , 2000, Journal of Fluid Mechanics.

[2230]  A. V. S. S. K. S. Gupta,et al.  Prediction of heat transfer coefficient in the cyclone separator of a CFB , 2000 .

[2231]  Ibrahim Dincer,et al.  Analytical modelling of transient phase-change problems , 2000 .

[2232]  Efstathios E. Michaelides,et al.  Mass and heat transfer from fluid spheres at low Reynolds numbers , 2000 .

[2233]  Franz Oeters,et al.  Laboratory experiments and process modelling of the melting and dissolution of low‐density ferro‐molybdenum in steel melts , 2000 .

[2234]  Roderick I. L. Guthrie,et al.  Measurements, simulations, and analyses of instantaneous heat fluxes from solidifying steels to the surfaces of twin roll casters and of aluminum to plasma-coated metal substrates , 2000 .

[2235]  Christopher W. Macosko,et al.  Reaction injection molding process of glass fiber reinforced polyurethane composites , 2000 .

[2236]  Hasse Fredriksson,et al.  Thermal analysis of copper-tin alloys during rapid solidification , 2000 .

[2237]  Nirupam Chakraborti,et al.  A genetic algorithm based heat transfer analysis of a bloom re-heating furnace , 2000 .

[2238]  W. Li,et al.  Fouling in enhanced tubes using cooling tower water: Part I: long-term fouling data , 2000 .

[2239]  Nesreen Ghaddar, Ahmad El-Hajj.  Numerical Study of Heat Transfer Augmentation of Viscous Flow in Corrugated Channels , 2000 .

[2240]  Senpuu Lin, Hsin-Sen Chu.  USING INVERSE MODELING TO ESTIMATE THE INCIDENT HEAT FLUX REQUIRED TO ACHIEVE TEMPERATURE UNIFORMITY ACROSS A CIRCULAR DISK , 2000 .

[2241]  G. Siva Prakash,et al.  NUMERICAL MODELLING OF MICROSCALE EFFECTS IN CONDUCTION FOR DIFFERENT THERMAL BOUNDARY CONDITIONS , 2000 .

[2242]  Wei Shyy,et al.  Incompressible flow and heat transfer computations using a continuous pressure equation and nonstaggered grids , 2000 .

[2243]  Vinayak Eswaran,et al.  Winglet-type vortex generators for plate-fin heat exchangers using triangular fins , 2000 .

[2244]  Andrea Prosperetti,et al.  The collapse of vapor bubbles in a spatially non-uniform flow , 2000 .

[2245]  Eric B. Ratts.  A Study of the Radiant Heat Exchange within a Controlled-Atmosphere Furnace , 2000 .

[2246]  Hikmet S. Aybar,et al.  A mathematical model for steam-driven jet pump , 2000 .

[2247]  F. D. Monte,et al.  Transient heat conduction in one-dimensional composite slab. A ‘natural’ analytic approach , 2000 .

[2248]  Jinho Lee,et al.  NUMERICAL STUDY OF MULTILAYERED FLOW REGIME IN DOUBLE-DIFFUSIVE CONVECTION IN A ROTATING ANNULUS WITH LATERAL HEATING , 2000 .

[2249]  L. Chen,et al.  Comparison of Six Typical Correlations for Upward Flow Boiling Heat Transfer with Kerosene in a Vertical Smooth Tube , 2000 .

[2250]  Antonio Barletta.  Combined forced and free flow of a power-law fluid in a vertical annular duct , 2000 .

[2251]  X. Y. You,et al.  Active control of laminar stability by feedback control strategy , 2000 .

[2252]  George Papadopoulos,et al.  Novel Shadow Image Velocimetry Technique for Inferring Temperature , 2000 .

[2253]  Cheng-I Weng,et al.  An analytical solution to coupled heat and moisture diffusion transfer in porous materials , 2000 .

[2254]  Emad M. Abo-Eldahab,et al.  Radiation Effect on Convective Heat Transfer in an Electrically Conducting Fluid at a Stretching Surface with Variable Viscosity and Uniform Free Stream , 2000 .

[2255]  Yiding Cao,et al.  Closed-form analytical solutions for radially rotating miniature high-temperature heat pipes including non-condensable gas effects , 2000 .

[2256]  Nicolas Deberne,et al.  Local measurements in the flow of a steam injector and visualisation , 2000 .

[2257]  Abdulmuhsen H. Ali.  Irreversible Thermal-Diffusional Coupling in Local Equilibrium , 2000 .

[2258]  Eddie Leonardi,et al.  Enhancement of Thermal Contact Conductance: Effect of Metallic Coating , 2000 .

[2259]  S. P. Venkateshan,et al.  Two-Dimensional Ablation in Cylindrical Geometry , 2000 .

[2260]  Ten-See Wang.  Effect of Fence on Linear Aerospike Plume-Induced Base-Heating Physics , 2000 .

[2261]  Dieter Vortmeyer,et al.  A new model for radiation heat transfer in emitting, absorbing and anisotropically scattering media based on the concept of mean beam length , 2000 .

[2262]  E. Elbashbeshy,et al.  Effect of radiation on forced convection flow of a micropolar fluid over a horizontal plate , 2000 .

[2263]  J. Thome,et al.  An Onset of Nucleate Boiling Criterion for Horizontal Flow Boiling , 2000 .

[2264]  He-Ping Tan,et al.  Coupled Radiation and Conduction in a Scattering Composite Layer with Coatings , 2000 .

[2265]  Ernst Messerschmid,et al.  Thermochemical Relaxation Through Collisions and Radiation , 2000 .

[2266]  Wei Li,et al.  Fouling in enhanced tubes using cooling tower water: Part II: combined particulate and precipitation fouling , 2000 .

[2267]  Klaus Lucas,et al.  On the thermodynamics of cogeneration , 2000 .

[2268]  B. Li,et al.  Free surface profiles and thermal convection in electrostatically levitated droplets , 2000 .

[2269]  Jenn-Jiang Hwang,et al.  Passive Control of Convective Transport Phenomena Utilizing an Attached-Detached Rib-Array , 2000 .

[2270]  H. I. Abu-Mulaweh,et al.  Measurements and Predictions of Turbulent Natural Convection Adjacent to Backward-Facing Step , 2000 .

[2271]  C. Long,et al.  SURFRAD—A National Surface Radiation Budget Network for Atmospheric Research , 2000 .

[2272]  M. A. Mansour,et al.  Heat and mass transfer in magnetohydrodynamic flow of micropolar fluid on a circular cylinder with uniform heat and mass flux , 2000 .

[2273]  S. P. Anjali Devi,et al.  Effects of Chemical Reaction, Heat and Mass Transfer on MHD Flow past a Semi Infinite Plate , 2000 .

[2274]  XinGang Liang,et al.  Thermal conductance of randomly oriented composites of thin layers , 2000 .

[2275]  Kuppalapalle Vajravelu,et al.  Analytical and Numerical Solutions of Nonlinear Differential Equations Arising in Non-Newtonian Fluid Flows , 2000 .

[2276]  Eugene Levin,et al.  Potential Energies and Collision Integrals for Interactions of Carbon and Nitrogen Atoms , 2000 .

[2277]  Ping Cheng,et al.  Friction factor and Nusselt number for thermoacoustic transport phenomena in a tube , 2000 .

[2278]  Andrea Luke,et al.  Heat transfer and size distribution of active nucleation sites in boiling propane outside a tube , 2000 .

[2279]  Jurij Avsec,et al.  Influence of multipolar and induction interactions on the speed of sound , 2000 .

[2280]  Judy A. Perkins,et al.  Freezing Couette Flow in an Annulus with Translating Outer Sleeve , 2000 .

[2281]  Keh-Chin Chang,et al.  Enhancement of Natural Convection by Eccentricity of Power Cable Inside Underground Conduit , 2000 .

[2282]  W. Roetzel,et al.  Conceptions for heat transfer correlation of nanofluids , 2000 .

[2283]  Ronald L. Dougherty,et al.  Robust Heat Transfer Correlation for Turbulent Gas-Liquid Flow in Vertical Pipes , 2000 .

[2284]  Kwang-Tzu Yang,et al.  Mechanisms for the heat transfer enhancement in zero-mean oscillatory flows in short channels , 2000 .

[2285]  J. P. Longtin,et al.  Laser-based measurement of liquid temperature or concentration at a solid–liquid interface , 2000 .

[2286]  Abdalla M. Al-Amiri.  Analysis of momentum and energy transfer in a lid-driven cavity filled with a porous medium , 2000 .

[2287]  Jean-Luc Battaglia,et al.  Estimation of heat flux and temperature in a tool during turning , 2000 .

[2288]  S. A. El-Wakil,et al.  Variational-iterative method for conductive-radiative heat transfer in spherical inhomogeneous medium , 2000 .

[2289]  Achim Schmidt,et al.  Numerical prediction of heat transfer in fluidized beds by a kinetic theory of granular flows , 2000 .

[2290]  Geoffrey F. Hewitt,et al.  Studies of wispy-annular flow using transient pressure gradient and optical measurements , 2000 .

[2291]  Keh-Chin Chang,et al.  Natural Convection Simulation Inside the Underground Conduit of an Electrical Power Cable , 2000 .

[2292]  James A. Voogt,et al.  Modeling Surface Sensible Heat Flux Using Surface Radiative Temperatures in a Simple Urban Area , 2000 .

[2293]  G. Sultan,et al.  Enhancing forced convection heat transfer from multiple protruding heat sources simulating electronic components in a horizontal channel by passive cooling , 2000 .

[2294]  P. T. Tsilingiris,et al.  Heat transfer analysis of low thermal conductivity solar energy absorbers , 2000 .

[2295]  Mariusz Markowski.  Reconstruction of a heat exchanger network under industrial constraints - the case of a crude distillation unit , 2000 .

[2296]  G. W. H. Silcock,et al.  On the nature, influence and magnitudes of flame heat transfer during surface flame spread , 2000 .

[2297]  Luis E. Herranz,et al.  Modeling condensation heat transfer on a horizontal finned tube in the presence of noncondensable gases , 2000 .

[2298]  Moon-Hyun Chun,et al.  A parametric study and a guide chart to avoid condensation-induced water hammer in a horizontal pipe , 2000 .

[2299]  B. V. Lebedev,et al.  Thermodynamic Properties of Hydrofullerene C60H36 from 5 to 340 K , 2000 .

[2300]  K. P. Sandeep,et al.  Modelling non‐Newtonian two‐phase flow in conventional and helical‐holding tubes , 2000 .

[2301]  R. Ogulata,et al.  Irreversibility analysis of cross flow heat exchangers , 2000 .

[2302]  Noboru Sakai,et al.  Numerical Analysis of Heat Transfer of Canned Liquid Foods Containing Fibers or Particles during Sterilization , 2000 .

[2303]  Hans-Jörg Bart,et al.  Heat Transfer and Hydrodynamics in Preparative Continuous Annular Chromatography (P‐CAC) , 2000 .

[2304]  Jung-Yang San,et al.  Second-law analysis of a wet crossflow heat exchanger , 2000 .

[2305]  José Luz Silveira,et al.  Analysis of aluminum plates under heating in electrical and natural gas furnaces , 2000 .

[2306]  Noël Midoux,et al.  Hydrodynamics and heat transfer in packed bed with co current up flow for coalescing and non-coalescing liquids. A simple model , 2000 .

[2307]  J. K. Gigler,et al.  Forced convective drying of willow chips , 2000 .

[2308]  P. K. Banipal,et al.  Partial molar heat capacities and volumes of transfer of some saccharides from water to aqueous urea solutions atT = 298.15 K , 2000 .

[2309]  Biswajit Basu,et al.  Three-dimensional simulation of flow and thermal field in a Czochralski melt using a block-structured finite-volume method , 2000 .

[2310]  Biswajit Basu,et al.  Numerical study of three-dimensional mixed convection due to buoyancy and centrifugal force in an oxide melt for Czochralski growth , 2000 .

[2311]  Dimosthenis Trimis,et al.  Numerical and experimental investigation of matrix-stabilized methane/air combustion in porous inert media , 2000 .

[2312]  Ali J. Chamkha.  Thermal radiation and buoyancy effects on hydromagnetic flow over an accelerating permeable surface with heat source or sink , 2000 .

[2313]  Chris Paola,et al.  Fluvio-deltaic sedimentation: A generalized Stefan problem , 2000, European Journal of Applied Mathematics.

[2314]  Josette Bellan,et al.  An all-pressure fluid drop model applied to a binary mixture: heptane in nitrogen , 2000 .

[2315]  S. Haldar,et al.  Fully developed combined convection in a seven-rod horizontal bundle , 2000 .

[2316]  Roger A. Pielke,et al.  Thermally Induced Compression Waves and Gravity Waves Generated by Convective Storms , 2000 .

[2317]  Doo-Sung Lee.  Nonlinear Stability of a Cylindrical Interface with Mass and Heat Transfer , 2000 .

[2318]  Chris J. Diederich,et al.  Ultrasound applicators with internal water-cooling for high-powered interstitial thermal therapy , 2000, IEEE Transactions on Biomedical Engineering.

[2319]  William Pao,et al.  Coupling temperature to a double‐porosity model of deformable porous media , 2000 .

[2320]  Rafael Colás,et al.  A model for heat conduction through the oxide layer of steel during hot rolling , 2000 .

[2321]  H. S. Silva,et al.  Heat transfer studies in natural carbonates from San Juan (Argentina) , 2000 .

[2322]  Yuan Ping Feng,et al.  Study of temperature profile and specific heat capacity in temperature modulated DSC with a low sample heat diffusivity , 2000 .

[2323]  Yuan Ping Feng,et al.  Some elements in specific heat capacity measurement and numerical simulation of temperature modulated DSC (TMDSC) with R/C network , 2000 .

[2324]  Fazle Hussain,et al.  Generation of near-wall coherent structures in a turbulent boundary layer , 2000 .

[2325]  A. Webb,et al.  Monitoring temperature changes in capillary electrophoresis with nanoliter-volume NMR thermometry. , 2000, Analytical chemistry.

[2326]  Chris R. Kleijn,et al.  Two-dimensional simulation of an oxy-acetylene torch diamond reactor with a detailed gas-phase and surface mechanism , 2000 .

[2327]  Jong-Kyu Yoon,et al.  Numerical Analysis of Fluid Flow and Heat Transfer in the Parallel Type Mold of a Thin Slab Caster , 2000 .

[2328]  Wei-Mon Yan,et al.  Experimental study of unsteady thermal convection in heated rotating inclined cylinders , 2000 .

[2329]  Vijay Modi,et al.  Radiative transfer in arbitrarily-shaped axisymmetric enclosures with anisotropic scattering media , 2000 .

[2330]  S. A. Zhdanok,et al.  Effect of porous media transparency on spherical and cylindrical filtrational combustion heaters performance , 2000 .

[2331]  Yuichi Mitsutake,et al.  Enhancement of CHF in open thermosyphon with heated bottom chamber , 2000 .

[2332]  Chunxin Yang,et al.  Study on bubble dynamics for pool nucleate [International Journal of Heat and Mass Transfer 43 (2000) 203-208] , 2000 .

[2333]  Chii-Dong Ho,et al.  An analytical study of laminar counterflow double-pass heat exchangers with external refluxes , 2000 .

[2334]  D. Fletcher,et al.  Flow boiling heat transfer of Freon R11 and HCFC123 in narrow passages , 2000 .

[2335]  Thomas L. Merrill.  Thermally controlled bubble collapse in binary solutions , 2000 .

[2336]  Carlos F.M. Coimbra,et al.  Unsteady heat transfer in the harmonic heating of a dilute suspension of small particles , 2000 .

[2337]  Chi-Chuan Wang,et al.  Heat and momentum transfer for compact louvered fin-and-tube heat exchangers in wet conditions , 2000 .

[2338]  Stanislaw Sieniutycz,et al.  Dynamic programming approach to a Fermat type principle for heat flow , 2000 .

[2339]  Dennis A. Siginer,et al.  On the laminar free convection and instability of grade fluids in enclosures , 2000 .

[2340]  Hui Zhang,et al.  Volumetric heat transfer coefficients in solid–fluid porous media: closure problem, thermal analysis and model improvement with fluid flow , 2000 .

[2341]  Vladimir V. Kulish,et al.  Diffusion within a porous medium with randomly distributed heat sinks , 2000 .

[2342]  Narayanaswamy Balakrishnan,et al.  Investigation of randomness, overlap and the interaction of bubbles forming at adjacent nucleation sites in pool boiling , 2000 .

[2343]  In Seok Kang,et al.  Analytical studies on the crystal-melt interface shape in the Czochralski process for oxide single crystals , 2000 .

[2344]  Michel Daguenet,et al.  Heat and mass transfer in a high temperature packed moving bed subject to an external radiative source , 2000 .

[2345]  Bernd Zimanowski,et al.  Determination of thermal conductivity of natural silicate melts , 2000 .

[2346]  Sung-Whan Cho,et al.  The effects of processing parameters on the microstructure and mechanical properties of modified B390 alloy in direct squeeze casting , 2000 .

[2347]  Haecheon Choi,et al.  Direct numerical simulation of turbulent thermal boundary layers , 2000 .

[2348]  K. D. Jorgensen,et al.  Transient heating of opaque and semitransparent materials by radiation during processing , 2000 .

[2349]  Mohammed M. Farid,et al.  Thermal validation of a simple moving boundary model to determine the frying time of a thin potato crisp , 2000 .

[2350]  Ramazan Kahraman,et al.  Pellet Breakup Due to Pressure Generated during Wood Pyrolysis , 2000 .

[2351]  Yong-Ming Guo,et al.  Hot backward extrusion comparative analyses by a combined finite element method , 2000 .

[2352]  J. L. White,et al.  Non-Isothermal Transient Startup of A Starved Flow Modular Co-Rotating Twin Screw Extruder , 2000 .

[2353]  L. J. Lee,et al.  Analysis of Flow and Heat Transfer in Liquid Composite Molding , 2000 .

[2354]  Zuhair A. Munir,et al.  A finite difference model for the combustion of zirconium in oxygen , 2000 .

[2355]  M. Juma,et al.  Method of Measuring Thermal Diffusivity of Composites with Thick Fillers and Reinforced Rubbers , 2000 .

[2356]  Roger C. Reed,et al.  A process model for the distortion induced by the electron-beam welding of a nickel-based superalloy , 2000 .

[2357]  Somsak Swaddiwudhipong,et al.  EVALUATION OF INTERNAL RESTRAINED STRAIN IN CONCRETE MEMBERS AT EARLY AGE , 2000 .

[2358]  D. C. Sego,et al.  Freezing Temperatures of Freely Falling Industrial Wastewater Droplets , 2000 .

[2359]  R. N. Edwards,et al.  Predicted groundwater circulation in fractured and unfractured anisotropic porous media driven by nuclear fuel waste heat generation , 2000 .

[2360]  Andrey V. Kuznetsov,et al.  Fluid flow and heat transfer analysis of Couette flow in a composite duct , 2000 .

[2361]  Timo Siikonen,et al.  An Improved Simple Method on a Collocated Grid , 2000 .

[2362]  Kenji Kobayashi,et al.  Measuring interfacial waves on film flowing down tube inner wall using laser focus displacement meter , 2000 .

[2363]  Zhuomin M. Zhang,et al.  Thermal analysis of the volume absorber in pulsed excimer laser calorimeters , 2000 .

[2364]  John R. Saylor,et al.  The effect of a surfactant monolayer on the temperature field of a water surface undergoing evaporation , 2000 .

[2365]  Oh Kyung Kwon,et al.  Numerical Study on Cooling Phenomenon of Water with Supercooled Region in a Horizontal Circular Cylinder , 2000 .

[2366]  J. V. Beck,et al.  AN EFFICIENT METHOD OF COMPUTING EIGENVALUES IN HEAT CONDUCTION , 2000 .

[2367]  D. Singh,et al.  Generalized relationships for estimating soil thermal resistivity , 2000 .

[2368]  Ching-Yang Cheng.  Natural convection heat and mass transfer near a wavy cone with constant wall temperature and concentration in a porous medium , 2000 .

[2369]  Adrian Wing-Keung Law,et al.  Measurement of mixing processes with combined digital particle image velocimetry and planar laser induced fluorescence , 2000 .

[2370]  Yang-Yao Niu,et al.  SIMPLE CONSERVATIVE FLUX SPLITTING FOR MULTI-COMPONENT FLOW CALCULATIONS , 2000 .

[2371]  Wenxian Lin,et al.  Direct simulation of weak laminar plane fountains in a homogeneous fluid , 2000 .

[2372]  R. C. Mehta,et al.  Numerical Heat Transfer Study over Spiked Blunt Bodies at Mach 6.8 , 2000 .

[2373]  Jenn-Jiang Hwang,et al.  Active control of mixed convection in a rotating periodical two‐pass duct by using trailing‐wall transpiration , 2000 .

[2374]  G. Greene,et al.  Total hemispherical emissivity of oxidized Inconel 718 in the temperature range 300-1000°C , 2000 .

[2375]  T. Liou,et al.  Non-intrusive measurements of near-wall fluid flow and surface heat transfer in a serpentine passage , 2000 .

[2376]  Chad Winkler,et al.  Mixed convection in film condensation from isothermal vertical surfaces — the entire regime , 2000 .

[2377]  Volker Uhlenwinkel,et al.  Investigation of heat transfer from circular cylinders in high power 10 kHz and 20 kHz acoustic resonant fields , 2000 .

[2378]  Adrian Bejan,et al.  Convective trees of fluid channels for volumetric cooling , 2000 .

[2379]  Jan A. Visser,et al.  A simplified equation to predict heat transfer in an internal duct of a gas turbine nozzle guide vane , 2000 .

[2380]  Stefano Ubertini,et al.  Experimental performance analysis of an annular diffuser with and without struts , 2000 .

[2381]  David J. Browne,et al.  Use of experiment and an inverse method to study interface heat transfer during solidification in the investment casting process , 2000 .

[2382]  J. F. Foss,et al.  Measurements of the convection heat transfer coefficient for a planar wall jet: uniform temperature and uniform heat flux boundary conditions , 2000 .

[2383]  Jyeshtharaj B. Joshi,et al.  CFD modeling of heat transfer in turbulent pipe flows , 2000 .

[2384]  Hazem Ali Attia.  Hiemenz magnetic flow of a non-Newtonian fluid of second grade with heat transfer , 2000 .

[2385]  S. H. Choi,et al.  Thermal characteristics of paraffin in a spherical capsule during freezing and melting processes , 2000 .

[2386]  K. T. Chuang,et al.  A new approach to simulation of distillation in packed columns , 2000 .

[2387]  Michalis Xenos,et al.  Numerical investigation of two-dimensional turbulent boundary-layer compressible flow with adverse pressure gradient and heat and mass transfer , 2000 .

[2388]  V. W. Goldschmidt,et al.  Heat transfer of a U-bend in a cross flow of air at different angles of incidence , 2000 .

[2389]  J. F. Martínez,et al.  Domain decomposition methods for the numerical resolution of the aluminium casting process , 2000 .

[2390]  Hassan M. Badr,et al.  Forced convection from a rotationally oscillating cylinder placed in a uniform stream , 2000 .

[2391]  J. E. Williams,et al.  Transient measurements of the heat transfer coefficient in unsteady, turbulent pipe flow , 2000 .

[2392]  Kankanhalli N. Seetharamu,et al.  Finite element simulation of transient laminar flow past a circular cylinder and two cylinders in tandem – Influence of buoyancy , 2000 .

[2393]  B. S. Yilbas.  LASER SHORT PULSE HEATING WITH CONVECTIVE BOUNDARY CONDITION , 2000 .

[2394]  Geoffrey F. Hewitt,et al.  Pressure gradient and holdup in horizontal two-phase gas- liquid flows with low liquid loading , 2000 .

[2395]  Sylvie Lorente,et al.  Multicellular natural convection in a high aspect ratio cavity: experimental and numerical results , 2000 .

[2396]  M. A. Al-Nimr,et al.  Transient Film Condensation on a Vertical Plate Imbedded in Porous Medium , 2000 .

[2397]  Yong Tae Kang,et al.  Analytical investigation of two different absorption modes: falling film and bubble types , 2000 .

[2398]  John Lohan,et al.  A benchmark study of computational fluid dynamics predictive accuracy for component-printed circuit board heat transfer , 2000 .

[2399]  R. Chouikh,et al.  Experimental study of the natural convection flow around an array of heated horizontal cylinders , 2000 .

[2400]  Ulrich Meier,et al.  LIF imaging and 2D temperature mapping in a model combustor at elevated pressure , 2000 .

[2401]  Orhan Aydin,et al.  Determination of optimum air-layer thickness in double-pane windows , 2000 .

[2402]  P. Razelos,et al.  Optimum dimensions of convecting–radiating fins:: Part I — longitudinal fins , 2000 .

[2403]  M. Sabry.  Scale effects on fluid flow and heat transfer in microchannels , 2000 .

[2404]  Peter C. Wayner,et al.  HEAT TRANSFER AND FLUID FLOW IN A NONISOTHERMAL CONSTRAINED VAPOR BUBBLE , 2000 .

[2405]  FABIAN ZENKLUSEN,et al.  HOMOGENEOUS GAS-SOLID SUSPENSIONS FOR EFFICIENT DOWNFLOW REACTORS , 2000 .

[2406]  Ahmet Z. Sahin.  Optimum operating conditions of solar driven heat engines , 2000 .

[2407]  H. W. Ng,et al.  A Proposed Process Control Chart for DC Plasma Spraying Process , 2000 .

[2408]  J. Fukai,et al.  Thermal conductivity enhancement of energy storage media using carbon fibers , 2000 .

[2409]  Daniel Vizman,et al.  On void engulfment in shaped sapphire crystals using 3D modelling , 2000 .

[2410]  Ahmed Z. Al-Garni,et al.  Effect of fouling on operational cost in pipe flow due to entropy generation , 2000 .

[2411]  Nancy Ma,et al.  Silicon Float Zone Process with a Weak Transverse Magnetic Field and Crystal Rotation , 2000 .

[2412]  Sankar Bhattacharya,et al.  A theoretical investigation of the influence of optical constants and particle size on the radiative properties and heat transfer involving ash clouds and deposits , 2000 .

[2413]  Kamil Kaygusuz,et al.  Experimental and theoretical investigation of a solar heating system with heat pump , 2000 .

[2414]  David Parker,et al.  Motion in a particle bed agitated by a single blade , 2000 .

[2415]  H. Vogt,et al.  The bubble coverage of gas-evolving electrodes in a flowing electrolyte , 2000 .

[2416]  Alain Cloutier,et al.  MODELING VACUUM-CONTACT DRYING OF WOOD: THE WATER POTENTIAL APPROACH , 2000 .

[2417]  Gauri S. Mittal,et al.  Use of artificial neural network to predict temperature, moisture, and fat in slab-shaped foods with edible coatings during deep-fat frying , 2000 .

[2418]  Sergey Minaev,et al.  Diffusion combustion of a liquid fuel film on a metal substrate , 2000 .

[2419]  P. G. Rao,et al.  Heat transfer to viscous Newtonian and non-Newtonian fluids using helical ribbon agitator , 2000 .

[2420]  Anne-Lucie Raoult-Wack,et al.  Deep‐fat frying of food: heat and mass transfer, transformations and reactions inside the frying material , 2000 .

[2421]  Denis Flick,et al.  Modeling and control of thawing phenomena in solute-impregnated frozen foods , 2000 .

[2422]  Armando C. Oliveira,et al.  Thermal behaviour of closed wet cooling towers for use with chilled ceilings , 2000 .

[2423]  Naim Afgan,et al.  A radiation and convection fluxmeter for high temperature applications , 2000 .

[2424]  Seung Wook Baek,et al.  Effects of thermal radiation on the sound wave propagation in a gas-particle two-phase medium , 2000 .

[2425]  Yuan-Jen Chang,et al.  Enhancement of a steam-jet refrigerator using a novel application of the petal nozzle , 2000 .

[2426]  Walt McKeown,et al.  Differential absorption techniques and radiometric satellite calibration for measuring air-sea interactions , 2000, IEEE Trans. Geosci. Remote. Sens..

[2427]  Kemal Tuzla,et al.  Parametric effects of particle size and gas velocity on cluster characteristics in fast fluidized beds , 2000 .

[2428]  Yaohua Bai,et al.  Heat transfer in the circulating fluidized bed of a commercial catalyst cooler , 2000 .

[2429]  Bie Rushan,et al.  Computations of a Circulating Fluidized-Bed Boiler with Wide Particle Size Distributions , 2000 .

[2430]  Jae Ryoun Youn,et al.  THERMAL DEFORMATION OF A PHOTO-CURED POLYMER FOR THE ANALYSIS OF STEREOLITHOGRAPHY , 2000 .

[2431]  Paulo L.C. Lage,et al.  Heat and mass transfer modeling during the formation and ascension of superheated bubbles , 2000 .

[2432]  Yi Li,et al.  Heat and moisture transfer with sorption and condensation in porous clothing assemblies and numerical simulation , 2000 .

[2433]  W. Hsieh,et al.  Heat-transfer analysis and thermal dispersion in thermally-developing region of a sintered porous metal channel , 2000 .

[2434]  Yongchan Kim,et al.  Evaporation heat transfer and pressure drop of R-22 in 7 and 9.52 mm smooth/micro-fin tubes , 2000 .

[2435]  Bernhard Weigand,et al.  Film cooling on a convex surface with zero pressure gradient flow , 2000 .

[2436]  J. G. Marakis,et al.  A parametric study of radiative heat transfer in pulverised coal furnaces , 2000 .

[2437]  Ken-ichi Saitoh,et al.  Longitudinal Heat Transfer in Oscillatory Flows in Pipe Bundles of Various Cross Sections , 2000 .

[2438]  Do-Young Yoon,et al.  The onset of vortex instability in laminar natural convection flow over an inclined plate embedded in a porous medium , 2000 .

[2439]  Yukio Nakano,et al.  Radiation Heat Transfer in Three-Dimensional Closed Space Including Diffuse and Specular Surfaces. (Numerical Calculation Method Using an Improved Ray-Tracing Method). , 2000 .

[2440]  Shigeru Uchiyama,et al.  Heat transfer effectiveness of saturated drops in the nonwetting regime impinging on a heated surface , 2000 .

[2441]  César Treviño,et al.  Laminar film condensation along a vertical fin , 2000 .

[2442]  Jing Liu,et al.  Boundary information based diagnostics on the thermal states of biological bodies , 2000 .

[2443]  A. Carotenuto,et al.  A lumped parameter model of the operating limits of one-well geothermal plant with down hole heat exchangers , 2000 .

[2444]  Sanjeev Chandra,et al.  Impact, recoil and splashing of molten metal droplets , 2000 .

[2445]  D. R. White,et al.  In situ temperature measurement during spray forming of A2-tool steel and axisymmetric two-dimensional analysis , 2000 .

[2446]  Américo Scotti,et al.  Mapping transfer modes for stainless steel gas metal arc welding , 2000 .

[2447]  Lorraine G. Olson,et al.  Rotational molding of plastics : Comparison of simulation and experimental results for an axisymmetric mold , 2000 .

[2448]  J. Norman,et al.  Surface flux estimation using radiometric temperature: A dual‐temperature‐difference method to minimize measurement errors , 2000 .

[2449]  W. Dai, R. Nassar.  A DOMAIN DECOMPOSITION METHOD FOR SOLVING THREE-DIMENSIONAL HEAT TRANSPORT EQUATIONS IN A DOUBLE-LAYERED THIN FILM WITH MICROSCALE THICKNESS , 2000 .

[2450]  S. Dutta,et al.  NUMERICAL PREDICTION OF TEMPERATURE DISTRIBUTION IN PEM FUEL CELLS , 2000 .

[2451]  Guan Heng Yeoh,et al.  THE INFLUENCE OF MOISTURE ON THE COMBUSTION OF WOOD , 2000 .

[2452]  C. Leung,et al.  NUMERICAL PREDICTION OF LAMINAR FORCED CONVECTION IN TRIANGULAR DUCTS WITH UNSTRUCTURED TRIANGULAR GRID METHOD , 2000 .

[2453]  Yehuda Taitel,et al.  Heat transfer in horizontal solid-liquid pipe flow , 2000 .

[2454]  Moo Hwan Kim,et al.  Experimental study on nucleate boiling enhancement and bubble dynamic behavior in saturated pool boiling using a nonuniform dc electric field , 2000 .

[2455]  M. Sharif,et al.  NUMERICAL MODELING OF HELICAL FLOW OF PSEUDOPLASTIC FLUIDS , 2000 .

[2456]  César Treviño,et al.  The conjugate conduction–natural convection heat transfer along a thin vertical plate with non-uniform internal heat generation , 2000 .

[2457]  Ali J. Chamkha,et al.  Hydromagnetic combined heat and mass transfer by natural convection from a permeable surface embedded in a fluid‐saturated porous medium , 2000 .

[2458]  Chr. Boyadjiev,et al.  Opposite-current flows in gas–liquid boundary layers — II. Mass transfer kinetics , 2000 .

[2459]  Theo G. Keith,et al.  Numerical computations of flow in rotating ducts with strong curvature , 2000 .

[2460]  A. N. Kucherov.  Sublimation and vaporization of an ice aerosol particle in the form of thin cylinder by laser radiation , 2000 .

[2461]  Masud Behnia,et al.  Comparisons between experiment and numerical simulation using a free surface technique of free-falling liquid jets , 2000 .

[2462]  Yong Zhao,et al.  A numerical method for simulation of forced convection in a composite porous/fluid system , 2000 .

[2463]  A. P. Watkins,et al.  Numerical analysis of depressurisation of highly pressurised liquid propane , 2000 .

[2464]  Clive A. Greated,et al.  On the measurement of strain rate in an oscillatory baffled column using particle image velocimetry , 2000 .

[2465]  Ciro Aprea,et al.  Experimental evaluation of R22 and R407C evaporative heat transfer coefficients in a vapour compression plant , 2000 .

[2466]  Orhan Aydin,et al.  Natural convection in enclosures with localized heating from below and symmetrical cooling from sides , 2000 .

[2467]  B. J. Brinkworth,et al.  A procedure for the routine calculation of laminar free and mixed convection in inclined ducts , 2000 .

[2468]  Ali J. Chamkha,et al.  Flow and mass transfer on a stretching sheet with a magnetic field and chemically reactive species , 2000 .

[2469]  Abdullah Abbas Kendoush,et al.  Measurement of void fraction in magnetic two-phase fluids , 2000 .

[2470]  J. Passos,et al.  Analysis of pool boiling within smooth and grooved tubes , 2000 .

[2471]  W Manners,et al.  Heat conduction through irregularly spaced plane strip contacts , 2000 .

[2472]  K. Badari Narayana,et al.  Radiation in boundary layer flow of an absorbing, emmiting and anisotropically scattering fluid , 2000 .

[2473]  Antonios K. Doufas,et al.  Simulation of melt spinning including flow-induced crystallization: Part I. Model development and predictions , 2000 .

[2474]  Mohammad O. Hamdan,et al.  Enhancing forced convection by inserting porous substrate in the core of a parallel‐plate channel , 2000 .

[2475]  Chin-Hsiang Cheng,et al.  Buoyancy-assisted flow reversal and convective heat transfer in entrance region of a vertical rectangular duct , 2000 .

[2476]  Tatsuya Hazuku,et al.  Measuring interfacial waves on film flowing down a vertical plate wall in the entry region using laser focus displacement meters , 2000 .

[2477]  Chi-Chuan Wang,et al.  Heat transfer and friction characteristics of plain fin-and-tube heat exchangers, part II: Correlation , 2000 .

[2478]  Ming Xiong,et al.  Numerical simulation of the effect of thermal dispersion on forced convection in a circular duct partly filled with a Brinkman‐Forchheimer porous medium , 2000 .

[2479]  Peng Han,et al.  A note on the solution of conjugate heat transfer problems using SIMPLE-like algorithms , 2000 .

[2480]  S. Saravanan,et al.  Low Prandtl Number Magnetoconvection in Cavities: Effect of Variable Thermal Conductivity , 2000 .

[2481]  Chi-Chuan Wang,et al.  Heat transfer and friction characteristics of plain fin-and-tube heat exchangers, part I: new experimental data , 2000 .

[2482]  Said I. Abdel-Khalik,et al.  Gas–liquid two-phase flow patterns and pressure drop in a horizontal micro-rod bundle , 2000 .

[2483]  J. Caldwell,et al.  Numerical solution of one‐phase Stefan problems by the heat balance integral method, Part I—cylindrical and spherical geometries , 2000 .

[2484]  Jian-Fu Zhao,et al.  Slug to annular flow transition of microgravity two-phase flow , 2000 .

[2485]  M. Hasnaoui,et al.  Mixed convection heat transfer in ventilated cavities with opposing and assisting flows , 2000 .

[2486]  S. Ben Nasrallah,et al.  Heat and mass transfer during drying of granular products — simulation with convective and conductive boundary conditions , 2000 .

[2487]  Yu. V. Zhernovyi,et al.  Mathematical modelling of heat transfer during electron-beam autocrucible melting by means of the steady-state Stefan problem , 2000 .

[2488]  J. Liu,et al.  SIMULATION OF RAPID THERMAL PROCESSING IN A DISTRIBUTED COMPUTING ENVIRONMENT , 2000 .

[2489]  H Takamatsu,et al.  Sludge collector performance in steam generators of pressurized water reactor , 2000 .

[2490]  Shuzo Murakami,et al.  Combined simulation of airflow, radiation and moisture transport for heat release from a human body , 2000 .

[2491]  T. G. Theofanous,et al.  Natural convection for in-vessel retention at prototypic Rayleigh numbers , 2000 .

[2492]  Masahiro Shiotsu,et al.  Film boiling heat transfer from a vertical cylinder in forced flow of liquids under saturated and subcooled conditions at pressures , 2000 .

[2493]  Babu J. Alappat,et al.  Performance prediction of an RCFB incineration system , 2000 .

[2494]  José L. Fernández,et al.  Cavity geometry influence on mass flow rate for single and double slope solar stills , 2000 .

[2495]  Theodor W. von Backström,et al.  Compressible Flow Through Solar Power Plant Chimneys , 2000 .

[2496]  Samuel M. Sami,et al.  Experimental investigation of two phase flow condensation of alternatives to HCFC-22 inside enhanced surface tubing , 2000 .

[2497]  D. W. Etheridge,et al.  Novel ventilation cooling system for reducing air conditioning in buildings.: Part I: testing and theoretical modelling , 2000 .

[2498]  Eric Dumont,et al.  INFLUENCE OF FLOW REGIMES ON TEMPERATURE HETEROGENEITIES WITHIN A SCRAPED SURFACE HEAT EXCHANGER , 2000 .

[2499]  S. Chan,et al.  Chemical Reactions in the Exhaust System of a Cold-start Engine , 2000 .

[2500]  Hosahalli S. Ramaswamy,et al.  Evaluation of factors influencing tube-flow fluid-to-particle heat transfer coefficient using a calorimetric technique , 2000 .

[2501]  Lage Jonsson,et al.  Two-fluid simulation on the mixed convection flow pattern in a nonisothermal water model of continuous casting tundish , 2000 .

[2502]  F. Courtois,et al.  A COMPARTMENTAL MODEL OF THIN-LAYER DRYING KINETICS OF ROUGH RICE , 2000 .

[2503]  M. Shi,et al.  Experimental investigation of the heat and mass transfer in a centrifugal fluidized bed dryer , 2000 .

[2504]  Peter J. Fryer,et al.  Modelling temperature distributions in cooling chocolate moulds , 2000 .

[2505]  Yan-Ping Chen,et al.  Measurements and model prediction of the solid–liquid equilibria of organic binary mixtures , 2000 .

[2506]  P. K. Bhor,et al.  Assessment of heat extraction through slab caster mould , 2000 .

[2507]  Michèle Marcotte,et al.  Cake baking in tunnel type multi-zone industrial ovens Part I. Characterization of baking conditions , 2000 .

[2508]  Hosahalli S. Ramaswamy,et al.  A neuro-computing approach for modeling of residence time distribution (RTD) of carrot cubes in a vertical scraped surface heat exchanger (SSHE) , 2000 .

[2509]  Gauri S. Mittal,et al.  Prediction of freezing time for food products using a neural network , 2000 .

[2510]  Qiang Liao,et al.  Augmentation of convective heat transfer inside tubes with three-dimensional internal extended surfaces and twisted-tape inserts , 2000 .

[2511]  Shusheng Pang,et al.  MATHEMATICAL MODELLING OF MDF FIBRE DRYING: DRYING OPTIMISATION , 2000 .

[2512]  Adrian Bejan,et al.  Entropy generation minimization in parallel‐plates counterflow heat exchangers , 2000 .

[2513]  P. Perré,et al.  MECHANISM OF TWO-DIMENSIONAL HEAT AND MASS TRANSFER DURING CONVECTTVE DRYING OF POROUS MXDIA UNDER DIFFERENT DRYING CONDITIONS , 2000 .

[2514]  Osamu Miyatake,et al.  Numerical simulation of liquid droplet solidification on substrates , 2000 .

[2515]  Yi Jiang,et al.  Simple method of calculating the transient thermal performance of composite material and its applicable condition , 2000 .

[2516]  Josette Bellan,et al.  Supercritical (and subcritical) fluid behavior and modeling: drops, streams, shear and mixing layers, jets and sprays , 2000 .

[2517]  Eric P. Chassignet,et al.  Numerical simulations of the North Atlantic subtropical gyre: Sensitivity to boundary conditions , 2000 .

[2518]  Y. Drossinos,et al.  Slip-flow heat transfer in circular tubes , 2000 .

[2519]  Ramazan Kahraman,et al.  Thermodynamic analysis of convective heat transfer in an annular packed bed , 2000 .

[2520]  A. K. Satapathy.  Thermal analysis of an innite slab during quenching , 2000 .

[2521]  Kambiz Vafai,et al.  An experimental investigation of the thermal performance of an asymmetrical flat plate heat pipe , 2000 .

[2522]  Kambiz Vafai,et al.  Transient characterization of flat plate heat pipes during startup and shutdown operations , 2000 .

[2523]  Marie-Paule Bonnet,et al.  Numerical modeling of thermal stratification in a lake reservoir. Methodology and case study , 2000, Aquatic Sciences.

[2524]  P Regli,et al.  Electromagnetic and heat transfer computations for non-ionizing radiation dosimetry. , 2000, Physics in medicine and biology.

[2525]  Vladimir F. Tishkin,et al.  Two-dimensional energy transfer and plasma formation under laser beam irradiation of a subcritical-density material , 2000 .

[2526]  T. C. Jue.  Analysis of heat and fluid flow in partially divided fluid saturated porous cavities , 2000 .

[2527]  Mohd. Zulfiquar Hafiz,et al.  Flow of a viscous incompressible fluid of temperature dependent viscosity past a permeable wedge with uniform surface heat flux , 2000 .

[2528]  R. C. Mehta,et al.  Peak heating for reattachment of separated flow on a spiked blunt-body , 2000 .

[2529]  V.M.K. Sastri,et al.  Conjugate natural convection cooling of protruding heat sources mounted on a substrate placed inside an enclosure: a parametric study , 2000 .

[2530]  Kankanhalli N. Seetharamu,et al.  Non-Darcy natural convection in a hydrodynamically and thermally anisotropic porous medium , 2000 .

[2531]  Young Whan Cho,et al.  Numerical analysis of fluid flow and heat transfer in molten zinc pot of continuous hot-dip galvanizing line , 2000 .

[2532]  R. Russo,et al.  Explosive change in crater properties during high power nanosecond laser ablation of silicon , 2000 .

[2533]  Vito Specchia,et al.  Methane combustion over low-emission catalytic foam burners , 2000 .

[2534]  P. Wild,et al.  CATALYTIC PRODUCTION OF HYDROGEN FROM METHANOL , 2000 .

[2535]  Robert D. Moser,et al.  Direct numerical simulation of a supersonic turbulent boundary layer at Mach 2.5 , 2000, Journal of Fluid Mechanics.

[2536]  Bernard Desmet,et al.  Experimental study of convective heat transfer from a rotating finned tube in transverse air flow , 2000 .

[2537]  Yuji Arita,et al.  Isotope effects on thermal diffusivity of boron carbide , 2000 .

[2538]  V. Sidiropoulos,et al.  The effects of dual‐orifice air‐ring design on blown film cooling , 2000 .

[2539]  Mostafa A. Karam,et al.  A thermal wave approach for heat transfer in a nonuniform soil , 2000 .

[2540]  C. Burn,et al.  The thermal regime of a retrogressive thaw slump near Mayo, Yukon Territory , 2000 .

[2541]  Fernando T. Pinho,et al.  Analysis of forced convection in pipes and channels with the simplified Phan-Thien–Tanner fluid , 2000 .

[2542]  Gad Hetsroni,et al.  Thermohydrodynamic characteristics of two-phase flow in a heated capillary , 2000 .

[2543]  Takahiro Yamada,et al.  Consideration of heat transfer and solidification in 3-D MHD calculation , 2000 .

[2544]  N. K. Anand,et al.  Use of slots to enhance forced convective cooling between channels with surface-mounted heat sources , 2000 .

[2545]  J. A. Spim,et al.  A modified network approach for modeling solidification of complex-shaped domains , 2000 .

[2546]  Muhammad M. Rahman,et al.  NUMERICAL MODELING OF CONJUGATE HEAT TRANSFER DURING IMPINGEMENT OF FREE LIQUID JET ISSUING FROM A SLOT NOZZLE , 2000 .

[2547]  R. M. Cotta,et al.  Transient natural convection inside porous cavities : Hybrid numerical-analytical solution and mixed symbolic-numerical computation , 2000 .

[2548]  S. Kwak,et al.  A Study of Bubble Behavior and Boiling Heat Transfer Enhancement under Electric Field , 2000 .

[2549]  Kanchan M. Kelkar,et al.  NUMERICAL METHOD FOR THE PREDICTION OF INCOMPRESSIBLE FLOW AND HEAT TRANSFER IN DOMAINS WITH SPECIFIED PRESSURE BOUNDARY CONDITIONS , 2000 .

[2550]  V. Prasad,et al.  A FULL 3-DIMENSIONAL ADAPTIVE FINITE VOLUME SCHEME FOR TRANSPORT AND PHASE-CHANGE PROCESSES, PART II: APPLICATION TO CRYSTAL GROWTH , 2000 .

[2551]  Olivier Sovran,et al.  FINITE FREQUENCY EXTERNAL MODULATION IN DOUBLY DIFFUSIVE CONVECTION , 2000 .

[2552]  A. W. Date,et al.  A calculation procedure for solution of incompressible Navier-Stokes equations on curvilinear non staggered grids , 2000 .

[2553]  C. K. Chun,et al.  A FIXED-GRID FINITE-DIFFERENCE METHOD FOR PHASE-CHANGE PROBLEMS , 2000 .

[2554]  Alain J. Kassab,et al.  CHARACTERIZATION OF SPACE DEPENDENT THERMAL CONDUCTIVITY WITH A BEM-BASED GENETIC ALGORITHM , 2000 .

[2555]  Arash Saidi, Bengt SundÉn.  NUMERICAL SIMULATION OF TURBULENT CONVECTIVE HEAT TRANSFER IN SQUARE RIBBED DUCTS , 2000 .

[2556]  Tov Elperin,et al.  Effect of an absorbate concentration level on the coupled mass and heat transfer during short gas plugs dissolution , 2000 .

[2557]  Daniel Murphy,et al.  Heat transfer in a pure near-critical fluid: diffusive and convective regimes in 3He , 2000 .

[2558]  Shimon Haber,et al.  A steady state, one dimensional, model for boiling two phase flow in triangular micro-channel , 2000 .

[2559]  M. Bohnet,et al.  Modification of molecular interactions at the interface crystal/heat transfer surface to minimize heat exchanger fouling , 2000 .

[2560]  David F. Fletcher,et al.  An experimental study of gas–liquid flow in a narrow conduit , 2000 .

[2561]  F. Garnier,et al.  Heat Transfer Coefficient Measurement on Iced Airfoil in Small Icing Wind Tunnel , 2000 .

[2562]  Harmindar S. Takhar,et al.  Melting from a horizontal disk rotating with a time dependent angular velocity , 2000 .

[2563]  C. C. Ngo,et al.  Effective Permeability for Natural Convection in a Layered Porous Annulus , 2000 .

[2564]  Benjamin T.F. Chung,et al.  Nonequilibrium Planar Interface Model for Solidification of Semitransparent Radiating Materials , 2000 .

[2565]  G. Sims,et al.  Turbulent fluid flow, heat transfer and onset of nucleate boiling in annular finned passages , 2000 .

[2566]  Antonio F. Miguel,et al.  Contribution to flow characterisation through porous media , 2000 .

[2567]  M. O. Lutset.  Experimental study of temperature distribution in the vicinity of film boiling , 2000 .

[2568]  Ioan Pop,et al.  Vertical free convection in a porous medium with variable permeability effects , 2000 .

[2569]  Sukumar Chakravarthy,et al.  Hypersonic Flow Predictions Using Linear and Nonlinear Turbulence Closures , 2000 .

[2570]  Seppo Syrjälä.  NUMERICAL SIMULATION OF NONISOTHERMAL FLOW OF POLYMER MELT IN A SINGLE-SCREW EXTRUDER: A VALIDATION STUDY , 2000 .

[2571]  Jacob N. Chung,et al.  Non-Darcy mixed convection in a vertical channel filled with a porous medium , 2000 .

[2572]  Igor Usherov-Marshak,et al.  Compacted Ag powder at very low temperatures: acoustic and magnetic properties and their influence on the thermal coupling to liquid 3He , 2000 .

[2573]  David G. Lilley,et al.  Minimum Safe Distance from Pool Fires , 2000 .

[2574]  S. Bertoli,et al.  Radiant and convective heat transfer on pneumatic transport of particles: an analytical study , 2000 .

[2575]  Joseph J. Niemela.  Ultra-high Rayleigh number convection in cryogenic helium gas , 2000 .

[2576]  Leonid A. Dombrovsky,et al.  Heat transfer by radiation from a hot particle to ambient water through the vapor layer , 2000 .

[2577]  He-Ping Tan,et al.  Inverse Radiation Problem in Axisymmetric Free Flames , 2000 .

[2578]  Muhammad M. Rahman,et al.  Analysis of Transient Conjugate Heat Transfer to a Free Impinging Jet , 2000 .

[2579]  Jeffrey P. Moder,et al.  Radiation heat transfer calculation using an angular-multiblock procedure , 2000 .

[2580]  A. Schulz,et al.  Infrared thermography as applied to film cooling of gas turbine components , 2000 .

[2581]  Andrzej Służalec,et al.  Random heat flow with phase change , 2000 .

[2582]  Monika Auweter-Kurtz,et al.  Energy Partitions in Inductively Heated Plasma Sources for Reentry Simulations , 2000 .

[2583]  Tian Jian Lu,et al.  Thermal management of high power electronics with phase change cooling , 2000 .

[2584]  Cha'o-Kuang Chen,et al.  Transient analysis of forced convection along a wavy surface in micropolar fluids , 2000 .

[2585]  A. Prasad,et al.  A FULL 3-DIMENSIONAL ADAPTIVE FINITE VOLUME SCHEME FOR TRANSPORT AND PHASE-CHANGE PROCESSES, PART I: FORMULATION AND VALIDATION , 2000 .

[2586]  Terry V. Jones,et al.  Liquid crystal measurements of heat transfer and surface shear stress , 2000 .

[2587]  Je-Chin Han,et al.  A transient liquid crystal thermography technique for gas turbine heat transfer measurements , 2000 .

[2588]  I. Sezai,et al.  Natural convection from a discrete heat source on the bottom of a horizontal enclosure , 2000 .

[2589]  Dae Hee Lee,et al.  Flow and heat transfer characteristics of a two-dimensional oblique wall attaching offset jet , 2000 .

[2590]  Kwan-Soo Lee,et al.  Influence of design parameters on the heat transfer and flow friction characteristics of the heat exchanger with slit fins , 2000 .

[2591]  D Lampard,et al.  The use of a mass transfer technique to infer heat transfer coefficients on film cooled turbine components , 2000 .

[2592]  John K. Eaton,et al.  A general method for calculating the heat island correction and uncertainties for button gauges , 2000 .

[2593]  T. Ohara, D. Suzuki,et al.  INTERMOLECULAR ENERGY TRANSFER AT A SOLID-LIQUID INTERFACE , 2000 .

[2594]  Cheng-Xian Lin,et al.  Condensation of R134a flowing inside helicoidal pipe , 2000 .

[2595]  Xing Zhang,et al.  Measurements of Thermal Conductivity and Electrical Conductivity of a Single Carbon Fiber , 2000 .

[2596]  G. W. Young,et al.  An asymptotic approach to the mathematical modeling of Ohno continuous casting of cored rods , 2000 .

[2597]  Stephen Whitaker,et al.  Vapor–Liquid Jump Conditions within a Porous Medium: Results for Mass and Energy , 2000 .

[2598]  Hazim B. Awbi,et al.  Mixed convection from heated room surfaces , 2000 .

[2599]  S. C. Haldar.  Laminar free convection in open-ended vertical 7-rod bundles: numerical , 2000 .

[2600]  Pekka Tuomaala,et al.  A rational method for the distribution of nodes in modelling of transient heat conduction in plane slabs , 2000 .

[2601]  Sigmar Wittig,et al.  Gas Turbine Heat Transfer: Past and Future Challenges , 2000 .

[2602]  P. Ligrani,et al.  Flow visualization and flow tracking as applied to turbine components in gas turbine engines , 2000 .

[2603]  Neil E. Todreas,et al.  An experimental investigation of a passive cooling unit for nuclear plant containment , 2000 .

[2604]  Marcia B. H. Mantelli,et al.  Transient Temperature Behavior of Multistage Cryogenic Radiators: Model and Experimental Validation , 2000 .

[2605]  S. Y. Liang,et al.  Comparison of one-dimensional and two-dimensional models for wet-surface fin efficiency of a plate-fin-tube heat exchanger , 2000 .

[2606]  M. Kevin Drost,et al.  Miniaturization Technologies for Advanced Energy Conversion and Transfer Systems , 2000 .

[2607]  L. W. Ward.  Application of the Two-Dimensional Navier-Stokes Equations to Steam Cooling in Asymmetrically Heated Channels , 2000 .

[2608]  Melkon Tatlier,et al.  THE PERFORMANCE ANALYSIS OF A SOLAR ADSORPTION HEAT PUMP UTILIZING ZEOLITE COATINGS ON METAL SUPPORTS , 2000 .

[2609]  Mo Chung,et al.  THERMODYNAMIC PROPERTY VARIATION OF NONAZEOTROPIC REFRIGERANT MIXTURES (NARMs) IN THE TEMPERATURE GLIDING ZONE , 2000 .

[2610]  R. Burkina,et al.  Filtration combustion of a gas in a semiinfinite porous medium , 2000 .

[2611]  S. D. Probert,et al.  Forced convection and pressure drop in a horizontal triangular-sectional duct with V-grooved (i.e. orthogonal to the mean flow) inner surfaces , 2000 .

[2612]  Ahmet T. Bulgan,et al.  Investigation of thermodynamic properties of alternative fluid couples for absorption thermal systems , 2000 .

[2613]  C A McMahon,et al.  The influence of quenchant agitation on the heat transfer coefficient and residual stress development in the quenching of steels , 2000 .

[2614]  Jose Hernández,et al.  Analytical solution of mass transfer equation considering shrinkage for modeling food-drying kinetics , 2000 .

[2615]  Lixian Zhuang,et al.  Heat transfer characteristics of carbon steel spirally fluted tube for high pressure preheaters , 2000 .

[2616]  Tomoaki KUNUGI,et al.  Prediction of Forced Gas Flows in Circular Tubes at High Heat Fluxes Accompanied by Laminarization , 2000 .

[2617]  László Tömösy,et al.  CONVECTION HEAT TRANSEER COEFFICIENTS AT CONVECTIVE DRYING OF POROUS MATERIALS* , 2000 .

[2618]  Brian E. Farkas,et al.  ANALYSIS OF CONVECTIVE HEAT TRANSFER DURING IMMERSION FRYING , 2000 .

[2619]  Lp Ketteringham,et al.  The use of high thermal conductivity inserts to improve the cooling of cooked foods , 2000 .

[2620]  M. Schubnell,et al.  Temperature and Heat Flow Calibration of A DSC-instrument in the Temperature Range Between −100 and 160°C , 2000 .

[2621]  M. Mohammed Shah,et al.  A General Correlation for Heat Transfer During Dispersed-Flow Film Boiling in Tubes , 2000 .

[2622]  Eduardo Alonso,et al.  Modeling swelling soils for disposal barriers , 2000 .

[2623]  Shigenao Maruyama,et al.  Radiative heat transfer in inhomogeneous, nongray, and anisotropically scattering media , 2000 .

[2624]  Seung Wook Baek,et al.  The combined Monte-Carlo and finite-volume method for radiation in a two-dimensional irregular geometry , 2000 .

[2625]  Kazakov,et al.  Maximal work problem in finite-time thermodynamics , 2000, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[2626]  Nieuwenhuizen,et al.  Steady adiabatic state: its thermodynamics, entropy production, energy dissipation, and violation of onsager relations , 2000, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[2627]  J Zhang,et al.  Experimental measurement and theoretical analyses of the freezing-thawing processes around a probe. , 2000, Cryo letters.

[2628]  Vladimir V. Riabov,et al.  Gas Dynamic Equations, Transport Coefficients, and Effects in Nonequilibrium Diatomic Gas Flows , 2000 .

[2629]  Marcelo de Aquino Martorano,et al.  Heat transfer coefficient at the metal–mould interface in the unidirectional solidification of Cu–8%Sn alloys , 2000 .

[2630]  I. Mudawar,et al.  Critical heat flux (CHF) for water flow in tubes—I. Compilation and assessment of world CHF data , 2000 .

[2631]  R. M. Nelson,et al.  Prediction of diurnal change in 10-h fuel stick moisture content , 2000 .

[2632]  Kenneth R. Muske,et al.  SOLVING A THERMAL REGENERATOR MODEL USING IMPLICIT NEWTON-KRYLOV METHODS , 2000 .

[2633]  Helmut R. Brand,et al.  Thermal convection in a rotating layer of a magnetic fluid , 2000 .

[2634]  Yinping Zhang,et al.  Membrane-based humidity pump: performance and limitations , 2000 .

[2635]  Michel Y. Louge,et al.  Simultaneous, noninvasive measurements of convective heat transfer and solid volume fraction at the wall of an entrained gas–solid suspension , 2000 .

[2636]  Mario A. Medina,et al.  Effects of shingle absorptivity, radiant barrier emissivity, attic ventilation flowrate, and roof slope on the performance of radiant barriers , 2000 .

[2637]  R. Muthucumaraswamy,et al.  Flow past an impulsively started vertical plate with constant heat flux and mass transfer , 2000 .

[2638]  Mohammad Sheikh,et al.  Measurement of thermal diffusivity of isotropic materials using a laser flash method and its validation by finite element analysis , 2000 .

[2639]  Ching-Yang Cheng,et al.  Transient heat and mass transfer by natural convection from vertical surfaces in porous media , 2000 .

[2640]  A. Dedic,et al.  Simplifying convective heat and mass transfer in moisture desorption of beech wood by introducing characteristic transfer coefficients , 2000, Holz als Roh- und Werkstoff.

[2641]  Pierre Durand,et al.  Dynamic and thermodynamic structure of the lower troposphere above rain forest and wet savanna during the EXPRESSO campaign , 2000 .

[2642]  J. Conley,et al.  Modeling the effects of cooling rate, hydrogen content, grain refiner and modifier on microporosity formation in Al A356 alloys , 2000 .

[2643]  Jung-Yang San,et al.  Mass diffusion in a spherical microporous particle with thermal effect and gas-side mass transfer resistance , 2000 .

[2644]  A. Baytaş.  Entropy generation for natural convection in an inclined porous cavity , 2000 .

[2645]  Daniel Petit,et al.  An experimental identification of line heat sources in a diffusive system using the boundary element method , 2000 .

[2646]  P. Payvar,et al.  Pool boiling of pure R134a from a single Turbo-BII-HP tube , 2000 .

[2647]  A. Slavin,et al.  A new model for the effective thermal conductivity of packed beds of solid spheroids : alumina in helium between 100 and 500°C , 2000 .

[2648]  Rodolphe Vaillon,et al.  Conductive radiative coupling in an absorbing emitting axisymmetric medium , 2000 .

[2649]  Gustavo Gutierrez,et al.  Numerical simulation of non-linear heat conduction subjected to a laser source: the effects of variable thermal properties , 2000 .

[2650]  Aydin Ungan,et al.  Numerical modeling of microwave induced natural convection , 2000 .

[2651]  G. D. McBain,et al.  Evaporation from an open cylinder , 2000 .

[2652]  Peter Stephan,et al.  Influence of heat conduction in the wall on nucleate boiling heat transfer , 2000 .

[2653]  L. Kadinski,et al.  In situ visualization and analysis of silicon carbide physical vapor transport growth using digital X-ray imaging , 2000 .

[2654]  H. Wilke,et al.  Influence of Marangoni convection on the flow pattern in the melt during growth of Y3Al5O12 single crystals by the Czochralski method , 2000 .

[2655]  Aleksey Lipchin,et al.  Hybrid finite-volume/finite-element simulation of heat transfer and melt turbulence in Czochralski crystal growth of silicon , 2000 .

[2656]  Adam J. Berkovich,et al.  Predictive Heat Model for Australian Oil Shale Drying and Retorting , 2000 .

[2657]  Carlos H. Salinas,et al.  NUMERICAL STUDY OF UNSTEADY 2D NATURAL CONVECTION AND SOLIDIFICATION OF A FOOD INSIDE A FREEZING CHAMBER , 2000 .

[2658]  M. M. Rahman,et al.  Analysis of Conjugate Heat Transfer in Microchannel Heat Sinks , 2000 .

[2659]  Orhan Aydin, Wen-Jei Yang.  MIXED CONVECTION IN CAVITIES WITH A LOCALLY HEATED LOWER WALL AND MOVING SIDEWALLS , 2000 .

[2660]  Rolf D. Reitz,et al.  MODELING THE EFFECT OF EGR AND MULTIPLE INJECTION SCHEMES ON I. C. ENGINE COMPONENT TEMPERATURES , 2000 .

[2661]  Gwang Hoon Rhee,et al.  ENHANCEMENT OF HEAT TRANSFER IN TURBULENT SEPARATED AND REATTACHING FLOW BY LOCAL FORCING , 2000 .

[2662]  Seong-O Kim,et al.  Heat transfer enhancement by radiation structures for an air channel of LMR decay heat removal , 2000 .

[2663]  Moon-Hyun Chun,et al.  Thermal analysis of a simulated CANDU 37-element spent fuel bundle with air backfill , 2000 .

[2664]  Dimitrios T. Hountalas,et al.  Measurements and analysis of load and speed effects on the instantaneous wall heat fluxes in a direct injection air‐cooled diesel engine , 2000 .

[2665]  M. El-Sayed,et al.  Laser-Induced Shape Changes of Colloidal Gold Nanorods Using Femtosecond and Nanosecond Laser Pulses , 2000 .

[2666]  John J. McGrath,et al.  Directional solidification of isotactic and atactic polypropylene blends , 2000 .

[2667]  T. J. Praisner,et al.  A high-accuracy calibration technique for thermochromic liquid crystal temperature measurements , 2000 .

[2668]  Bao-Zhu Guo,et al.  A semi-discrete approach to modelling and control of the continuous casting process , 2000 .

[2669]  Kenneth C. Mills,et al.  Break temperatures of mould fluxes and their relevance to continuous casting , 2000 .

[2670]  Yu. I. Dimitrienko,et al.  Thermomechanical behaviour of composites under local intense heating by irradiation , 2000 .

[2671]  Lin Ye,et al.  Experimental investigation of the resistance welding of thermoplastic-matrix composites. Part II: optimum processing window and mechanical performance , 2000 .

[2672]  Joseph S. Walder,et al.  Pyroclast/snow interactions and thermally driven slurry formation. Part 1: Theory for monodisperse grain beds , 2000 .

[2673]  O. P Polyansky,et al.  2D modelling of fluid flow and heat transport during the evolution of the Baikal rift , 2000 .

[2674]  R. Sheikholeslami,et al.  Composite Fouling of Heat Transfer Equipment in Aqueous Media - A Review , 2000 .

[2675]  S. H.-K. Lee,et al.  Multiple-Rays Tracing Technique for Radiative Exchange Within Packed Beds , 2000 .

[2676]  H. Sadat,et al.  PERFORMANCE AND ACCURACY OF A MESHLESS METHOD FOR LAMINAR NATURAL CONVECTION , 2000 .

[2677]  W. J. McFarland,et al.  Study of Scale-Removal Methods in a Double-Pipe Heat Exchanger , 2000 .

[2678]  H. Zhang,et al.  AN ADAPTIVE LEVEL SET METHOD FOR MOVING-BOUNDARY PROBLEMS: APPLICATION TO DROPLET SPREADING AND SOLIDIFICATION , 2000 .

[2679]  Marcelo J.S. de Lemos.  Flow and heat transfer in rectangular enclosures using a new block-implicit numerical method , 2000 .

[2680]  Aditi Chattopadhyay,et al.  Multidisciplinary optimization for gas turbine airfoil design , 2000 .

[2681]  Remi Manceau,et al.  Turbulent heat transfer predictions using the –f model on unstructured meshes , 2000 .

[2682]  Vaughan R Voller,et al.  A model of microsegregation during binary alloy solidification , 2000 .

[2683]  Georg Müller,et al.  3D numerical simulation of melt flow in the presence of a rotating magnetic field , 2000 .

[2684]  Olaf Strelow,et al.  A general calculation method for plate heat exchangers , 2000 .

[2685]  F. Moukalled,et al.  Parametric study of mixed convection in channels with concave and convex surfaces , 2000 .

[2686]  A Attou,et al.  Experimental study of the critical flashing flow through a relief line: evidence of the double-choked flow phenomenon , 2000 .

[2687]  H. Müller-Steinhagen,et al.  An evaluation of the performance of phenomenological models for predicting pressure gradient during gas-liquid flow in horizontal pipelines , 2000 .

[2688]  Hiroshi Kawamura,et al.  Modelling of turbulent scalar transport in homogeneous turbulence , 2000 .

[2689]  Sasa Kenjeres,et al.  On the implementation of effects of Lorentz force in turbulence closure models , 2000 .

[2690]  R. A. Johns,et al.  Two-phase heat transfer coefficients of three HFC refrigerants inside a horizontal smooth tube, part I: evaporation , 2000 .

[2691]  R. E. Critoph,et al.  Thermophysical properties of monolithic carbon , 2000 .

[2692]  B. W. Webb,et al.  Slot jet impingement heat transfer from circular cylinders , 2000 .

[2693]  Suresh V. Garimella,et al.  The influence of gravity levels on the horizontal Bridgman crystal growth of an alloy , 2000 .

[2694]  G. F. Naterer,et al.  PREDICTIVE ENTROPY BASED CORRECTION OF PHASE CHANGE COMPUTATIONS WITH FLUID FLOW - PART 2: APPLICATION PROBLEMS , 2000 .

[2695]  V. K. Shiff.  Mathematical simulation of radiative-conductive heat transfer in a cylindricalvolume , 2000 .

[2696]  Jae Min Hyun,et al.  Flow and heat transfer in a pipe containing a coaxially-rotating disk , 2000 .

[2697]  A. Szekeres,et al.  Analogy between heat and moisture , 2000 .

[2698]  Said I. Abdel-Khalik,et al.  An empirical correlation for electrohydrodynamic enhancement of natural convection. , 2000 .

[2699]  Xiaofeng Peng,et al.  Experimental study on the dryout heat flux of falling liquid film , 2000 .

[2700]  Iztok Golobič,et al.  Pool boiling CHF on a laser heated thin plate , 2000 .

[2701]  Chris T. Kiranoudis,et al.  Computational analysis of thermal comfort: the case of the archaeological museum of Athens , 2000 .

[2702]  Bourhan Tashtoush,et al.  Heat transfer analysis of a non‐Newtonian fluid on a power‐law stretched surface with suction or injection for uniform and cooled surface temperature , 2000 .

[2703]  Michael J. Hounslow,et al.  Modelling droplet size distributions in polydispersed wet-steam flows , 2000 .

[2704]  Chung-Wen Lan,et al.  Effects of axial vibration on vertical zone-melting processing , 2000 .

[2705]  Kemal Tuzla,et al.  Characteristics of liquid–wall contact in post-CHF flow boiling , 2000 .

[2706]  R. Sheikholeslami,et al.  Calcium Sulfate Fouling-Precipitation or Particulate: A Proposed Composite Model , 2000 .

[2707]  Chih-Yang Wu,et al.  Integral equation formulation for transient radiative transfer in an anisotropically scattering medium , 2000 .

[2708]  R. Krupiczka,et al.  The influence of mass transport on the heat transfer coefficients during the boiling of multicomponent mixtures , 2000 .

[2709]  S. Ghosh,et al.  Hall effects on steady hydromagnetic flow in a rotating channel in the presence of an inclined magnetic field , 2000 .

[2710]  Youn J. Kim,et al.  Behaviors of anisotropic fluids in the vicinity of a wedge , 2000 .

[2711]  Md. Anwar Hossain,et al.  Flow of viscous incompressible fluid with temperature dependent viscosity and thermal conductivity past a permeable wedge with uniform surface heat flux , 2000 .

[2712]  Witold M. Lewandowski,et al.  Free convection heat transfer and fluid flow above horizontal rectangular plates , 2000 .

[2713]  Pradit Terdtoon,et al.  Corrosion and fouling of tubes used in a thermosyphon economizer: a case study of paint protection , 2000 .

[2714]  Francesco Saverio D'Auria,et al.  Analyses of PACTEL passive safety injection experiments with APROS, CATHARE and RELAP5 codes , 2000 .

[2715]  J. C. Lam,et al.  Solar heat gain factors and the implications to building designs in subtropical regions , 2000 .

[2716]  A. K. Mohanty,et al.  Laminar free convection in open-ended vertical 7-rod bundles: experiments and porous model , 2000 .

[2717]  M. J. Palacios,et al.  A test method to evaluate the thermal performance of window glazings , 2000 .

[2718]  S. Ergin,et al.  Surface radiation with conduction and natural convection in a two-floor enclosure , 2000 .

[2719]  Constance L. Senior,et al.  Solar‐powered soil vapor extraction for removal of dense nonaqueous phase organics from soil , 2000 .

[2720]  H. A. El-Sheikh,et al.  Enhancement of air jet impingement heat transfer using pin-fin heat sinks , 2000 .

[2721]  J.-L Dupuy.  Testing Two Radiative Physical Models for Fire Spread Through Porous Forest Fuel Beds , 2000 .

[2722]  Eric Dumont,et al.  Electrodiffusional wall shear rate analysis in scraped surface heat exchanger , 2000 .

[2723]  João Cláudio Thoméo,et al.  Heat transfer in fixed bed: a model non-linearity approach , 2000 .

[2724]  Brian E. Farkas,et al.  INFLUENCE of OIL TEMPERATURE ON CONVECTIVE HEAT TRANSFER DURING IMMERSION FRYING , 2000 .

[2725]  Tanongkiat Kiatsiriroat,et al.  Performance analysis of a direct-contact thermal energy storage-solidification , 2000 .

[2726]  J. C. Barrett,et al.  Aerosol nucleation and growth during laminar tube flow: maximum saturations and nucleation rates , 2000 .

[2727]  Kas Hemmes,et al.  Operating characteristics of a reformer for molten carbonate fuel-cell power-generation systems , 2000 .

[2728]  Y. Hiraiwa,et al.  Temperature dependence of thermal conductivity of soil over a wide range of temperature (5–75°C) , 2000 .

[2729]  H. Murata,et al.  Experimental Investigation of Natural Convection in a Core of a Marine Reactor in Rolling Motion , 2000 .

[2730]  Tapio Salmi,et al.  Gas-phase hydrogenation of ethylbenzene over Ni.: Comparison of different laboratory fixed bed reactors , 2000 .

[2731]  Bing-Chwen Yang,et al.  Subcooled flow boiling heat transfer of R-134a and bubble characteristics in a horizontal annular duct , 2000 .

[2732]  Y. H. Li,et al.  Effects of thermal boundary condition on buoyancy driven transitional air flow in a vertical cylinder heated from below , 2000 .

[2733]  Jorge C. Oliveira,et al.  Determination of the heat transfer coefficient between bulk medium and packed containers in a batch retort , 2000 .

[2734]  J L Lewis,et al.  A simple cryopreservation method for the maintenance of cell viability and mechanical integrity of a cultured cartilage analog. , 2000, Cryobiology.

[2735]  Uma S. Bhatt,et al.  A Dissipation Integral with Application to Ocean Diffusivities and Structure , 2000 .

[2736]  M. Venkataramana,et al.  Inertial-Dissipation flux measurements over south Bay of Bengal during BOBMEX-Pilot experiment , 2000 .

[2737]  Shin-Hwa Wang,et al.  Existence and multiplicity of solutions of an equation from pool boiling on wires , 2000 .

[2738]  Jacob Lasri,et al.  Energy Conversion during Microwave Sintering of a Multiphase Ceramic Surrounded by a Susceptor , 2000 .

[2739]  Yoed Rabin,et al.  Infrared temperature sensing of mechanically loaded specimens: Thermal analysis , 2000 .

[2740]  Renaat Gijbels,et al.  Calculation of gas heating in direct current argon glow discharges , 2000 .

[2741]  Leonard F. DeBano,et al.  The role of fire and soil heating on water repellency in wildland environments: a review , 2000 .

[2742]  A. A. Mohammadein.  Similarity analysis of axisymmetric free convection on a horizontal infinite plate subject to a mixed thermal boundary condition in a micropolar fluid , 2000 .

[2743]  Bourhan Tashtoush,et al.  Heat-and-mass transfer analysis from vegetable and fruit products stored in cold conditions , 2000 .

[2744]  A. Campo,et al.  Low Reynolds number flow inside straight micro channels with irregular cross sections , 2000 .

[2745]  R. Muthucumaraswamy,et al.  On impulsive motion of a vertical plate with heat flux and diffusion of chemically reactive species , 2000 .

[2746]  A. Klaczak,et al.  Heat transfer by laminar flow in a vertical pipe with twisted-tape inserts , 2000 .

[2747]  Jürgen Schmidt,et al.  Modelling of heat transfer in the region of convection-controlled film boiling , 2000 .

[2748]  Jing Liu,et al.  Preliminary survey on the mechanisms of the wave-like behaviors of heat transfer in living tissues , 2000 .

[2749]  P. Ganesan,et al.  Transient natural convection flow over vertical cylinder with variable surface temperatures , 2000 .

[2750]  Ali J. Chamkha,et al.  Combined heat and mass transfer along a vertical moving cylinder with a free stream , 2000 .

[2751]  Ralph Greif,et al.  Simulation of a picosecond laser ablation plasma , 2000 .

[2752]  Stephen Morris,et al.  A phenomenological model for the contact region of an evaporating meniscus on a superheated slab , 2000, Journal of Fluid Mechanics.

[2753]  Lihua Zhu,et al.  Computer simulation of the deep extrusion of a thin-walled cup using the thermo-mechanically coupled elasto-plastic FEM , 2000 .

[2754]  Junya Kano,et al.  Numerical simulation model of the iron ore sintering process directly describing the agglomeration phenomenon of granules in the packed bed , 2000 .

[2755]  F. R. Camisani-Calzolari,et al.  Speed Disturbance Compenation in the Secondary Cooling Zone in Continuous Casting , 2000 .

[2756]  Sung Jin Kim,et al.  On the local thermal equilibrium in microchannel heat sinks , 2000 .

[2757]  Yoichiro Matsumoto,et al.  Construction of Collision Model of Diatomic Molecules : Improvment of Energy Transfer Model and Its Verification , 2000 .

[2758]  Hajime Nakamura,et al.  Fluid Flow and Heat Transfer around a Cylindrical Protuberance Mounted on a Flat Plate Boundary Layer , 2000 .

[2759]  D. Choi,et al.  Optimization of a horizontal MOCVD reactor for uniform epitaxial layer growth , 2000 .

[2760]  Thomas J. Hanratty,et al.  Limiting behavior of turbulent scalar transport close to a wall , 2000 .

[2761]  H. Park,et al.  Solution of the inverse radiation problem using a conjugate gradient method , 2000 .

[2762]  Chi-Chuan Wang,et al.  An airside correlation for plain fin-and-tube heat exchangers in wet conditions , 2000 .

[2763]  J. P. Schwartze,et al.  The evaporation of water into air of different humidities and the inversion temperature phenomenon , 2000 .

[2764]  Xiaoze Du,et al.  Study on laminar film-wise condensation for vapor flow in an inclined small/mini-diameter tube , 2000 .

[2765]  Peter Vadasz,et al.  Convergence and accuracy of Adomian’s decomposition method for the solution of Lorenz equations , 2000 .

[2766]  Shripad P. Mahulikar,et al.  Experimental verification of the role of Brinkman number in microchannels using local parameters , 2000 .

[2767]  Satoshi Kumagai,et al.  Pressure Fluctuation Associated with Bubble Motion in Microbubble Emission Boiling from a Vertical Surface. , 2000 .

[2768]  K. Kamiuto,et al.  Combined Conductive and Radiative Heat Transfer through Open-Celllar Porous Plates , 2000 .

[2769]  Maria A. Founti,et al.  Radiative heat transfer in natural gas-fired furnaces , 2000 .

[2770]  Chin-Hsiang Cheng,et al.  PREDICTIONS OF DEVELOPING FLOW WITH BUOYANCY-ASSISTED FLOW SEPARATION IN A VERTICAL RECTANGULAR DUCT: PARABOLIC MODEL VERSUS ELLIPTIC MODEL , 2000 .

[2771]  F. Moukalled,et al.  NATURAL CONVECTION IN TRAPEZOIDAL CAVITIES WITH BAFFLES MOUNTED ON THE UPPER INCLINED SURFACES , 2000 .

[2772]  S. H. Lee,et al.  SPHERE PACKING ALGORITHM FOR HEAT TRANSFER STUDIES , 2000 .

[2773]  Yang Liu, Nhan Phan-Thien,et al.  AN OPTIMUM SPACING PROBLEM FOR THREE CHIPS MOUNTED ON A VERTICAL SUBSTRATE IN AN ENCLOSURE , 2000 .

[2774]  Yeng-Yung Tsui,et al.  Heat Transfer Enhancement by Multilobe Vortex Generators: Effects of Lobe Parameters , 2000 .

[2775]  Wenjun Chen,et al.  Turbulent exchange processes within and above a straw mulch. part II: thermal and moisture regimes. , 2000 .

[2776]  D. Millan,et al.  RESOLUTION OF A THREE-DIMENSIONAL UNSTEADY INVERSE PROBLEM BY SEQUENTIAL METHOD USING PARAMETER REDUCTION AND INFRARED THERMOGRAPHY MEASUREMENTS , 2000 .

[2777]  Osman A. Hamed,et al.  Evaluation of polyphosphonate antiscalant at a low dose rate in the Al-Jubail Phase II MSF plant, Saudi Arabia☆ , 2000 .

[2778]  Hirofumi Tomita,et al.  Numerical simulation of pattern formation in the Bénard–Marangoni convection , 2000 .

[2779]  Yee Cheong Lam,et al.  Simulation of heat transfer and cure in pultrusion with a general-purpose finite element package , 2000 .

[2780]  Lin Ye,et al.  Experimental investigation of the resistance welding for thermoplastic-matrix composites. Part I: heating element and heat transfer , 2000 .

[2781]  Eugene Lai,et al.  Modeling of the plasticating process in a single‐screw extruder: A fast‐track approach , 2000 .

[2782]  Christophe Sotin,et al.  3D thermal convection with variable viscosity: can transient cooling be described by a quasi-static scaling law? , 2000 .

[2783]  Elmars Blums,et al.  Thermophoretic separation of ultrafine particles in ferrofluids in thermal diffusion column under the effect of an MHD convection , 2000 .

[2784]  M. Mamou,et al.  Onset of double-diffusive convection in a rectangular porous cavity subject to mixed boundary conditions , 2000 .

[2785]  Mo Se Kim,et al.  Performance and heat transfer characteristics of hydrocarbon refrigerants in a heat pump system , 2000 .

[2786]  D. Tayebi,et al.  Droplet transport in oil/gas and water/gas flow at high gas densities , 2000 .

[2787]  C. Mackie,et al.  Convective stability of a particle-laden fluid system in the presence of solidification , 2000 .

[2788]  Thomas F. Irvine,et al.  The effect of concentration gradient on the melting of a horizontal ice plate from above , 2000 .

[2789]  R Poulter,et al.  Hydrodynamics and thermal characteristics of corrugated channels: computational approach , 2000 .

[2790]  Igor V. Shevchuk,et al.  Turbulent heat transfer of rotating disk at constant temperature or density of heat flux to the wall , 2000 .

[2791]  Tsan-Hui Hsu,et al.  Mixed convection of micropolar fluids in a cavity , 2000 .

[2792]  Chi-Chuan Wang,et al.  Data reduction for air-side performance of fin-and-tube heat exchangers , 2000 .

[2793]  Evangelos Tsotsas,et al.  Modelling of heat transport in beds packed with spherical particles for various bed geometries and/or thermal boundary conditions , 2000 .

[2794]  Je-Chin Han,et al.  Computation of heat transfer in rotating two-pass square channels by a second-moment closure model , 2000 .

[2795]  Antonio Campo,et al.  Heat removal of in‐tube viscous flows to air with the assistance of arrays of plate fins Part I: theoretical aspects involving 3‐D, 2‐D and 1‐D models , 2000 .

[2796]  Chris R. Kleijn,et al.  Mixed convection in radial flow between horizontal plates — I. Numerical simulations , 2000 .

[2797]  Marcel Lacroix,et al.  Melting from heat sources flush mounted on a conducting vertical wall , 2000 .

[2798]  J. S. Paschkewitz,et al.  The influence of fluid properties on electrohydrodynamic heat transfer enhancement in liquids under viscous and electrically dominated flow conditions , 2000 .

[2799]  Nicolas Galanis,et al.  Transient behaviours of float zones in μ‐g and 1‐g environments , 2000 .

[2800]  A. D. Nazarov,et al.  A study of transient heat transfer from the heater surface to a boiling liquid , 2000 .

[2801]  Sassi Ben Nasrallah,et al.  Free convection in a vertical cylindrical enclosure , 2000 .

[2802]  Youn J. Kim,et al.  Unsteady MHD convective heat transfer past a semi-infinite vertical porous moving plate with variable suction , 2000 .

[2803]  Guang Wei Liu,et al.  Characterisation of the spray cooling heat transfer involved in a high pressure die casting process , 2000 .

[2804]  Leonid A. Dombrovsky,et al.  Thermal radiation from nonisothermal spherical particles of a semitransparent material , 2000 .

[2805]  Ali J. Chamkha.  Effects of heat absorption and thermal radiation on heat transfer in a fluid–particle flow past a surface in the presence of a gravity field , 2000 .

[2806]  J. Chung,et al.  Terrestrial and microgravity boiling heat transfer in a dielectrophoretic force field , 2000 .

[2807]  Hassan Hassan,et al.  Transition Onset Prediction for High-Speed Flow , 2000 .

[2808]  S. Le Masson,et al.  Control of vortex shedding by thermal effect at low Reynolds numbers , 2000 .

[2809]  Wei-Mon Yan,et al.  HEAT TRANSFER AND FRICTION CHARACTERISTICS OF FIN-AND-TUBE HEAT EXCHANGERS , 2000, Proceeding of Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV.

[2810]  J. Yoo,et al.  Performance analysis and simulation of automobile air conditioning system , 2000 .

[2811]  Isao Kataoka,et al.  Entrainment and desposition rates of droplets in annular two-phase flow , 2000 .

[2812]  Keumnam Cho,et al.  Evaporation heat transfer for R-22 and R-407C refrigerant–oil mixture in a microfin tube with a U-bend , 2000 .

[2813]  Maria A. Founti,et al.  Modelling of stretched natural gas diffusion flames , 2000 .

[2814]  Peter Jeschke,et al.  Liquid-crystal thermography for heat-transfer measurements in the presence of longitudinal vortices in a natural convection flow , 2000 .

[2815]  W. A. Oost,et al.  Stability Effects on Heat and Moisture Fluxes at Sea , 2000 .

[2816]  A. P. Kryukov,et al.  The Vapor Film Evolution at Superfluid Helium Boiling in Conditions of Microgravity , 2000 .

[2817]  Thomas Boeck,et al.  Temperature distribution in an array of moving cracks acting as heat sinks , 2000 .

[2818]  O. A. Korolyuk,et al.  Heat Transfer in Solid Solutions Hydrogen-Deuterium , 2000 .

[2819]  Adel A. Hegazy,et al.  Comparative study of the performances of four photovoltaic/thermal solar air collectors. , 2000 .

[2820]  M. Lee.  A critical heat flux approach for square rod bundles using the 1995 Groeneveld CHF table and bundle data of heat transfer research facility , 2000 .

[2821]  Souvik Bhattacharyya,et al.  Design considerations for a power optimized regenerative endoreversible Stirling cycle , 2000 .

[2822]  B. N. Prasad,et al.  Investigation for the optimal thermohydraulic performance of artificially roughened solar air heaters , 2000 .

[2823]  J. Davidson,et al.  A Review of Polymer Materials for Solar Water Heating Systems , 2000 .

[2824]  Akira Sakurai,et al.  Mechanisms of transitions to film boiling at CHFs in subcooled and pressurized liquids due to steady and increasing heat inputs , 2000 .

[2825]  Soteris A. Kalogirou.  Long-term performance prediction of forced circulation solar domestic water heating systems using artificial neural networks , 2000 .

[2826]  J. Davidson,et al.  Thermal Analysis of Polymer Heat Exchangers for Solar Water Heating: A Case Study , 2000 .

[2827]  M. Al-Busoul,et al.  Hydrodynamic and Heat Transfer Characteristics of an Air Fluidized Bed Utilizing a Transverse Magnetic Field , 2000 .

[2828]  Piero Salatino,et al.  Fluidization of solids with CO2 at pressures from ambient to supercritical , 2000 .

[2829]  Michael C. Georgiadis,et al.  Dynamic modelling and simulation of plate heat exchangers under milk fouling , 2000 .

[2830]  Guohua Chen,et al.  Heat and Mass Transfer in Batch Fluidized-Bed Drying of Porous Particles , 2000 .

[2831]  N. J Rabadi,et al.  Free convection from inclined permeable walls embedded in variable permeability porous media with lateral mass flux , 2000 .

[2832]  Ján Cvengroš,et al.  Modelling of fractionation in a molecular evaporator with divided condenser , 2000 .

[2833]  Kazuhiko Kawajiri,et al.  “On The Combustion and Soot Processes in a Fluidized Bed - Like Furnace” , 2000 .

[2834]  William R. Paterson,et al.  Mass or heat transfer from a sphere to a flowing fluid , 2000 .

[2835]  J. Yang,et al.  Determination of the Overall Heat Transfer Coefficient in a Vacuum Pyrolysis Moving and Stirred Bed Reactor , 2000 .

[2836]  W. Prins,et al.  Modelling of flash pyrolysis of a single wood particle. , 2000 .

[2837]  Pierre Joulain,et al.  Numerical Study of the Turbulent Burning between Vertical Parallel Walls with a Fire-Induced Flow , 2000 .

[2838]  Ibrahim Kocabas,et al.  Concentration and temperature transients in heterogeneous porous media: Part II: Radial transport , 2000 .

[2839]  A. Lanin,et al.  Numerical method of thermal shock resistance estimation by quenching of samples in water , 2000 .

[2840]  Sunil C. Joshi,et al.  Numerical Simulation of the Mould-filling Process in Resin-Transfer Moulding , 2000 .

[2841]  Ik Kyu Park,et al.  Multiphase flow modeling of molten material-vapor-liquid mixtures in thermal nonequilibrium , 2000 .

[2842]  R. P. Vedula,et al.  Pressure drop characteristics in a rotating smooth square channel with a sharp 180° bend , 2000 .

[2843]  Wu-Shung Fu,et al.  Numerical simulation of heat transfer induced by a body moving in the same direction as flowing fluids , 2000 .

[2844]  Norman A. Fleck,et al.  Crack channelling and spalling in a plate due to thermal shock loading , 2000 .

[2845]  Anwar Khalil Sheikh,et al.  A risk based heat exchanger analysis subject to fouling Part I: Performance evaluation , 2000 .

[2846]  G M Fahy,et al.  Vitrification enhancement by synthetic ice blocking agents. , 2000, Cryobiology.

[2847]  Wunenburger,et al.  Thermalization of a two-phase fluid in low gravity: heat transferred from cold to Hot , 2000, Physical review letters.

[2848]  G S Mittal,et al.  Prediction of temperature and moisture content of frankfurters during thermal processing using neural network. , 2000, Meat science.

[2849]  M. Toner,et al.  Literature review: supplemented phase diagram of the trehalose-water binary mixture. , 2000, Cryobiology.

[2850]  A J Welch,et al.  Dynamics of pulsed holmium:YAG laser photocoagulation of albumen. , 2000, Physics in medicine and biology.

[2851]  D. Bowles,et al.  Distribution and characterization of recrystallization inhibitor activity in plant and lichen species from the UK and maritime Antarctic. , 2000, Cryobiology.

[2852]  Graham O. Hughes,et al.  Underground Fumaroles: Excess Heat Effects in Vein Formation , 2000 .

[2853]  M. Cima,et al.  Production of injection molding tooling with conformal cooling channels using the three dimensional printing process , 2000 .

[2854]  Jorge C. Oliveira,et al.  Influence of the variability of processing factors on the F-value distribution in batch retorts , 2000 .

[2855]  J. Pacheco,et al.  NONSTAGGERED BOUNDARY-FITTED COORDINATE METHOD FOR FREE SURFACE FLOWS , 2000 .

[2856]  † and Tsair-Wang Chung,et al.  Comparison between Spray Towers with and without Fin Coils for Air Dehumidification Using Triethylene Glycol Solutions and Development of the Mass-Transfer Correlations , 2000 .

[2857]  John-Chang Chen,et al.  Transport Phenomena in Turbulent Falling Films , 2000 .

[2858]  V. A. Konstantinov,et al.  Heat transfer in the orientationally disordered phase of SF6 , 2000 .

[2859]  Johannes Gemmrich,et al.  Temperature anomalies beneath breaking waves and the decay of wave‐induced turbulence , 2000 .

[2860]  Gwang Hoon Rhee,et al.  A nonlinear low-Reynolds number heat transfer model for turbulent separated and reattaching flows , 2000 .

[2861]  A. Sahin,et al.  Entropy generation in turbulent liquid flow through a smooth duct subjected to constant wall temperature , 2000 .

[2862]  S. Aravinth,et al.  Prediction of heat and mass transfer for fully developed turbulent fluid flow through tubes , 2000 .

[2863]  Kamal Abdel Radi Ismail,et al.  A finite element free convection model for the side wall heated cavity , 2000 .

[2864]  Jae Min Hyun,et al.  Buoyant heat transfer in a rotating cup-like cavity , 2000 .

[2865]  Xiaoze Du,et al.  Condensation on the outside surface of a small/mini diameter tube for vapor flowing through a horizontal annulus surround by an adiabatic concentric tube , 2000 .

[2866]  Yung C. Shin,et al.  Transient, three-dimensional heat transfer model for the laser assisted machining of silicon nitride: II. Assessment of parametric effects , 2000 .

[2867]  Hoseon Yoo.  Analytical solutions to the unsteady close-contact melting on a flat plate , 2000 .

[2868]  Juan I. Ramos.  Heat and mass transfer in annular liquid jets: III. Combustion within the volume enclosed by the jet , 2000, Appl. Math. Comput..

[2869]  Akira Kobayashi,et al.  Experiment and validation of numerical simulation of coupled thermal, hydraulic and mechanical behaviour in the engineered buffer materials , 2000 .

[2870]  M. Antar,et al.  Steady and transient liquid sphere heating in a convective gas stream , 2000 .

[2871]  Achim Mahrle,et al.  Simulation of temperature fields in arc and beam welding , 2000 .

[2872]  Siegfried Schulz,et al.  Numerical investigations on the heat transfer in turbulent oscillating pipe flow , 2000 .

[2873]  Jürgen Schmidt,et al.  Boiling heat transfer region with independence of the wall temperature , 2000 .

[2874]  Chao-Yang Wang,et al.  Buoyancy-induced flows and phase-change heat transfer in a vertical capillary structure with symmetric heating , 2000 .

[2875]  Harmindar S. Takhar,et al.  Self-similar solution of the unsteady flow in the stagnation point region of a rotating sphere with a magnetic field , 2000 .

[2876]  Makoto Kuramoto,et al.  Numerical simulation for silicon crystal growth of up to 400 mm diameter in Czochralski furnaces , 2000 .

[2877]  Osvair Vidal Trevisan,et al.  Analytical solutions for heat flow in multiple pass welding , 2000 .

[2878]  Julio A. Deiber,et al.  Modeling the Melt Spinning of Polyethylene Terephthalate , 2000 .

[2879]  V. A. Dravin,et al.  Non-equilibrium acoustic phonon propagation in CVD diamond films , 2000 .

[2880]  W. D. Griffiths.  A model of the interfacial heat-transfer coefficient during unidirectional solidification of an aluminum alloy , 2000 .

[2881]  D. R. F. West,et al.  Effects of flux additions on inclusion removal and microstructure in electron beam button melting of Udimet 720 , 2000 .

[2882]  J. A. de Saja,et al.  Prediction of the radiation term in the thermal conductivity of crosslinked closed cell polyolefin foams , 2000 .

[2883]  R. W. DiRaddo,et al.  Modelling of phase change and material performance in blow moulding and thermoforming , 2000 .

[2884]  M. El-Bealy,et al.  Modeling of interdendritic strain and macrosegregation for dendritic solidification processes: Part II. Computation of interdendritic strain and segregation fields in steel ingots , 2000 .

[2885]  Takeshi Takatoya,et al.  Heat and water mass transfer modeling in polyimide based advanced composites , 2000 .

[2886]  C. E. Loo.  Changes in heat transfer when sintering porous goethitic iron ores , 2000 .

[2887]  Denis Ablitzer,et al.  Coal pyrolysis in a rotary kiln: Part II. Overall model of the furnace , 2000 .

[2888]  Malin Åkermo,et al.  Modeling compression molding of all-thermoplastic honeycomb core sandwich components. Part A : Model development , 2000 .

[2889]  J. Wong,et al.  Evolution of titanium arc weldment macro and microstructures -- Modeling and real time mapping of phases , 2000 .

[2890]  Randal D. Koster,et al.  The Sensitivity of Surface Fluxes to Soil Water Content in Three Land Surface Schemes , 2000 .

[2891]  Pn Brett,et al.  The estimation of fluid temperatures through an inverse heat conduction technique , 2000 .

[2892]  S. H. Lee,et al.  Computation of radiative properties in one-dimensional sphere packings for sintering applications , 2000 .

[2893]  Jiří Jaromír Klemeš,et al.  Heat Transfer Enhancement for Heat Exchanger Network Retrofit , 2000 .

[2894]  Sarit K. Das,et al.  Temperature response of a single blow regenerator using axially dispersive thermal wave of finite propagation velocity – analysis and experiment , 2000 .

[2895]  Nevin Selcuk, Gorkem Kirbas.  THE METHOD OF LINES SOLUTION OF THE DISCRETE ORDINATES METHOD FOR RADIATIVE HEAT TRANSFER IN ENCLOSURES , 2000 .

[2896]  T. P. Sommer,et al.  Effects of near-wall Reynolds-stress modeling on the calculation of the turbulent thermal field , 2000 .

[2897]  M. Asbik,et al.  Forced Convection Laminar Film Condensation of Downward Flowing Vapor on a Single Horizontal Elliptic Cylinder or a Bank of Elliptical Tubes , 2000 .

[2898]  Jacob N. Chung,et al.  An Accurate Method for the Simulation of Three-Dimensional Incompressible Heated Pipe Flow , 2000 .

[2899]  Mingjie Lin,et al.  Developing laminar flow and heat transfer in annular-sector ducts , 2000 .

[2900]  John R. Grace,et al.  Suspension-to-membrane-wall heat transfer in a circulating fluidized bed combustor , 2000 .

[2901]  L. Marino,et al.  Effects of the centrifugal forces on a gas between rotating cylinders , 2000 .

[2902]  Gang Chen,et al.  Phonon heat conduction in nanostructures , 2000 .

[2903]  Masoud Rokni,et al.  A NEW LOW-REYNOLDS VERSION OF AN EXPLICIT ALGEBRAIC STRESS MODEL FOR TURBULENT CONVECTIVE HEAT TRANSFER IN DUCTS , 2000 .

[2904]  Je-Chin Han,et al.  Impingement heat transfer on dimpled surfaces using a transient liquid crystal technique , 2000 .

[2905]  Chandrakant D. Patel,et al.  The effect of inclination on the heat transfer between a flat surface and an impinging two-dimensional air jet , 2000 .

[2906]  Suresh V. Garimella,et al.  Effects of nozzle-inlet chamfering on pressure drop and heat transfer in confined air jet impingement , 2000 .

[2907]  J. Straub.  Microscale boiling heat transfer under 0g and 1g conditions , 2000 .

[2908]  Savino Longo,et al.  Collision Integrals of High-Temperature Air Species , 2000 .

[2909]  Chzhon Sup Kim,et al.  Emission characteristics of electron-beam evaporators , 2000 .

[2910]  Fedor Gömöry,et al.  Electrical and mechanical properties of Bi-2223/Ag/barrier/Ag composite tapes , 2000 .

[2911]  Jürgen Schmidt,et al.  Onset of nucleate boiling in minichannels , 2000 .

[2912]  Abdulmuhsen H. Ali.  Non-Fourier Heat-Flux Law for Diatomic Gases , 2000 .

[2913]  Matjaž Hriberšek,et al.  Conjugate heat transfer by boundary-domain integral method , 2000 .

[2914]  Richard B. Miles,et al.  Temperature Measurements by Ultraviolet Filtered Rayleigh Scattering Using a Mercury Filter , 2000 .

[2915]  Kenichi Miyamoto,et al.  Molecular Dynamics Simulation of a Collapsing Bubble , 2000 .

[2916]  J. C. Han,et al.  Film Cooling Measurements on Cylindrical Models with Simulated Thermal Barrier Coating Spallation , 2000 .

[2917]  Quan Liao,et al.  On capillary-driven flow and phase-change heat transfer in a porous structure heated by a finned surface: measurements and modeling , 2000 .

[2918]  A. N. Magunov,et al.  Scanning calorimetry measurements of the gas temperature in an RF-discharge fluorine-containing plasma , 2000 .

[2919]  Magnus Pettersson,et al.  Modelling of an electric IR heater at transient and steady state conditions Part I: model and validation , 2000 .

[2920]  Paul J. Antaki.  Effect of dual-phase-lag heat conduction on ignition of a solid , 2000 .

[2921]  David J. Glaze,et al.  Effect of dispersion characteristics on particle temperature in an idealized nonpremixed reacting jet , 2000 .

[2922]  Jinliang Xu,et al.  Acoustic wave prediction in flowing steam–water two-phase mixture , 2000 .

[2923]  A. Murata,et al.  Large eddy simulation with a dynamic subgrid-scale model of turbulent heat transfer in an orthogonally rotating rectangular duct with transverse rib turbulators , 2000 .

[2924]  Ronald M. C. So,et al.  Complex turbulent wakes generated by two and three side-by-side cylinders , 2000 .

[2925]  Ioan Pop,et al.  The Effect of Time-Periodic Surface Temperature Oscillations on Free Convection from a Vertical Surface in a Porous Medium , 2000 .

[2926]  Ali Gülhan,et al.  Temperature Measurements by Laser-Induced Fluorescence Spectroscopy in Nonequilibrium High-Enthalpy Flow , 2000 .

[2927]  Huang Xiaoyang,et al.  Investigations on Transient and Steady-State Performance of a Micro Heat Pipe , 2000 .

[2928]  Kang Y. Huh,et al.  A new angular discretization scheme of the finite volume method for 3-D radiative heat transfer in absorbing, emitting and anisotropically scattering media , 2000 .

[2929]  B. V. Rathish Kumar,et al.  A Study of Free Convection Induced by a Vertical Wavy Surface with Heat Flux in a Porous Enclosure , 2000 .

[2930]  Achmed Schulz,et al.  Film-cooling holes with expanded exits: near-hole heat transfer coefficients , 2000 .

[2931]  Massimo Corcione,et al.  Laminar free convection from a vertical plate in partly dissociated gases , 2000 .

[2932]  D. Angirasa,et al.  Mixed convection in a vented enclosure with an isothermal vertical surface , 2000 .

[2933]  Shengmin Guo,et al.  The development of a new direct-heat-flux gauge for heat-transfer facilities , 2000 .

[2934]  Kazuyoshi Takayama,et al.  Measurement of Shock Standoff Distance for Sphere in Ballistic Range , 2000 .

[2935]  Monika Auweter-Kurtz,et al.  New inductively heated plasma source for reentry simulations , 2000 .

[2936]  Hassan M. Soliman,et al.  Experimental investigation of laminar mixed convection in an inclined semicircular duct under buoyancy assisted and opposed conditions , 2000 .

[2937]  Quan Liao,et al.  A visual study of phase-change heat transfer in a two- dimensional porous structure with a partial heating boundary , 2000 .

[2938]  P. Satyamurty,et al.  Hydromagnetic Flow in a Wall Heated Rigid Rotating Annulus , 2000 .

[2939]  M. Amin,et al.  Thermal Analysis During Continuous Casting Process Using Effective Heat Capacity Method , 2000 .

[2940]  Cheng-Xian Lin,et al.  Combined laminar forced convection and thermal radiation in a helical pipe , 2000 .

[2941]  Bernard Desmet,et al.  Influence of fin spacing and rotational speed on the convective heat exchanges from a rotating finned tube , 2000 .

[2942]  Fabrice Lemoine,et al.  Some experimental investigations on the concentration variance and its dissipation rate in a grid generated turbulent flow , 2000 .

[2943]  Oh-Hyun Rho,et al.  Navier-Stokes Computation of Flows in Arc Heaters , 2000 .

[2944]  P. N. Vabishchevich,et al.  Numerical solution of the inverse problem of reconstructing a distributed right-hand side of a parabolic equation , 2000 .

[2945]  Ching-yu Yang,et al.  Determination of the temperature dependent thermophysical properties from temperature responses measured at medium’s boundaries , 2000 .

[2946]  Magnus Pettersson,et al.  Modelling of an electric IR heater at transient and steady state conditions. Part II: modelling a paper dryer , 2000 .

[2947]  M. Lallemand,et al.  Effect of interfacial phenomena on evaporative heat transfer in micro heat pipes 1 Based on a paper , 2000 .

[2948]  Eric Van den Bulck,et al.  Modelling of the mixed convection in the windings of a disc-type power transformer , 2000 .

[2949]  S. Sami,et al.  Prediction of convective boiling characteristics of alternatives to R-502 inside air/refrigerant enhanced surface tubing , 2000 .

[2950]  Miklós Neményi,et al.  Investigation of simultaneous heat and mass transfer within the maize kernels during drying. , 2000 .

[2951]  John Burnett,et al.  Simple approach to cooling load component calculation through PV walls , 2000 .

[2952]  J.E.R. Coney,et al.  Airflow maldistribution and the performance of a packaged air conditioning unit evaporator , 2000 .

[2953]  Chris T. Kiranoudis,et al.  Mathematical modeling of environmental conditions inside historical buildings. The case of the archaeological museum of Athens , 2000 .

[2954]  J.E.R. Coney,et al.  A comparison of the predicted and experimental heat transfer performance of a finned tube evaporator , 2000 .

[2955]  S. Y. Liang,et al.  Study on refrigerant circuitry of condenser coils with exergy destruction analysis , 2000 .

[2956]  Knut Franke.  A new approach for the numerical calculation of freezing and thawing processes of foods using a modified fictitious heat flow method , 2000 .

[2957]  H V Rao.  Isentropic recuperative heat exchanger with regenerative work transfer , 2000 .

[2958]  Vishwanath Prasad,et al.  Modeling of silicon carbide crystal growth by physical vapor transport method , 2000 .

[2959]  Ian T. Cameron,et al.  A SIMPLE DYNAMIC MODEL FOR SOLID TRANSPORT IN ROTARY DRYERS , 2000 .

[2960]  Masaaki Nakamura,et al.  Flow and Heat Transfer Characteristics in Liquid-Solid Swirl Fluidized Bed Using Centrifugal Force , 2000 .

[2961]  William R. Paterson,et al.  Gas Channelling and Heat Transfer in Moving Beds of Spherical Particles , 2000 .

[2962]  A. V. Kupriyanov,et al.  Experemental investigations of transcritical heat transfer on an electrically heated model of a fuel assembly , 2000 .

[2963]  Suleyman A. Gokoglu,et al.  A Precise Calibration Technique for Measuring High Gas Temperatures , 2000 .

[2964]  Hideyuki Aoki,et al.  Numerical analysis of heat and mass transfer characteristics in the metal hydride bed , 2000 .

[2965]  V. R. Tarnawski,et al.  Modelling approaches to predicting thermal conductivity of soils at high temperatures , 2000 .

[2966]  Jochen Ströhle,et al.  A Radiation Model for the Numerical Simulation of Coal-Fired Furnaces Using Body-Fitted Grids , 2000 .

[2967]  Vishwanath Prasad,et al.  A numerical model for inductively heated cylindrical silicon tube growth system , 2000 .

[2968]  Nevin Selçuk,et al.  Investigation of Radiative Heat Transfer in Freeboard of a 0.3 MWt AFBC Test Rig , 2000 .

[2969]  Franz Durst,et al.  Global numerical simulation of heat and mass transfer for SiC bulk crystal growth by PVT , 2000 .

[2970]  S. Chan,et al.  NOVEL BIOLOGICAL INHIBITORS OF FOULING AND SCALE FORMATION ON HEAT TRANSFER SURFACES THROUGH GENETIC ENGINEERING , 2000 .

[2971]  Rudolf Maly,et al.  Unsteady vaporization and ignition of a three-dimensional droplet array , 2000 .

[2972]  Donghoon Shin,et al.  The combustion of simulated waste particles in a fixed bed , 2000 .

[2973]  Gyung-Min Choi,et al.  The relationship between firing modes and nitric oxide emission in highly preheated air combustion , 2000 .

[2974]  C. E. Triplett,et al.  A Comparison of Natural Convection Heat Transfer for a Staggered Versus an Aligned Array of Horizontal Spent Nuclear Fuel Rods Within a Rectangular Enclosure , 2000 .

[2975]  Georges Berthoud,et al.  Heat Transfer Modeling during a Vapor Explosion , 2000 .

[2976]  K. Wei,et al.  Resin transfer molding (RTM) process of a high performance epoxy resin. I: Kinetic studies of cure reaction , 2000 .

[2977]  R G Carroll,et al.  Reduced metabolic rate accompanies the hemorrhage-induced hypothermia in conscious rats. , 2000, Resuscitation.

[2978]  M Yamasaki,et al.  Effect of acute heat exposure on skin blood flow of the paralyzed thigh in persons with spinal cord injury , 2000, Spinal Cord.

[2979]  Yung-Hsiang Chen,et al.  TWO-DIMENSIONAL SCHEME FOR CONVECTION-DIFFUSION WITH LINEAR PRODUCTION , 2000 .

[2980]  Suresh K. Aggarwal,et al.  Transient supercritical droplet evaporation with emphasis on the effects of equation of state , 2000 .

[2981]  B W Raaymakers,et al.  Temperature simulations in tissue with a realistic computer generated vessel network. , 2000, Physics in medicine and biology.

[2982]  James R. MacFall,et al.  Perturbations in hyperthermia temperature distributions associated with counter-current flow: numerical simulations and empirical verification , 2000, IEEE Transactions on Biomedical Engineering.

[2983]  Z C Zheng,et al.  Conceptual design of a combined device for normothermia and venous compression. , 2000, Medical engineering & physics.

[2984]  S Chakraborty,et al.  A generalized algorithm for modelling phase change problems in materials processing , 2000 .

[2985]  Satish S. Nair,et al.  Parametric studies of human thermal mechanisms and measurements , 2000, IEEE Transactions on Biomedical Engineering.

[2986]  J. Iwan D. Alexander,et al.  Investigation of vibrational control of convective flows in Bridgman melt growth configurations , 2000 .

[2987]  C. Gandin,et al.  Process modelling of grain selection during the solidification of single crystal superalloy castings , 2000 .

[2988]  David A. Yuen,et al.  Extended-Boussinesq thermal–chemical convection with moving heat sources and variable viscosity , 2000 .

[2989]  Lixian Zhuang,et al.  Experimental studies on heat transfer enhancement of the inside and outside spirally triangle finned tube with small spiral angles for high-pressure preheaters , 2000 .

[2990]  Prabir Basu,et al.  An experimental and theoretical investigation into the heat transfer of a finned water wall tube in a circulating fluidized bed boiler , 2000 .

[2991]  Samuel M. Sami,et al.  Heat transfer prediction of air‐to‐refrigerant two‐phase flow boiling of alternatives to HCFC‐22 inside air/refrigerant enhanced surface tubing , 2000 .

[2992]  Penger Tong,et al.  Turbulent thermal convection in a cell with ordered rough boundaries , 2000, Journal of Fluid Mechanics.

[2993]  Ali J. Chamkha,et al.  Hydromagnetic simultaneous heat and mass transfer by mixed convection from a vertical plate embedded in a stratified porous medium with thermal dispersion effects , 2000 .

[2994]  C. H. Chen,et al.  Mixed convection cooling of a heated, continuously stretching surface , 2000 .

[2995]  Jürgen Karl.  Spontaneous condensation in boundary layers , 2000 .

[2996]  Ibrahim Dincer.  Heat transfer parameter models and correlations for cooling applications , 2000 .

[2997]  F. Seebacher,et al.  Heat transfer in a microvascular network: the effect of heart rate on heating and cooling in reptiles (Pogona barbata and Varanus varius). , 2000, Journal of theoretical biology.

[2998]  G. N. Tiwari,et al.  Performance evaluation of distillation-cum-greenhouse for a warm and humid climate , 2000 .

[2999]  Yunzhong Liu,et al.  Simulation study of heat transfer in multi-stage rapid solidification , 2000 .

[3000]  Philippe Jean-Baptiste,et al.  Self‐limiting geothermal convection in marine carbonate platforms , 2000 .

[3001]  Hirohiko Sato,et al.  Novel Electronic Properties of a Nano-Graphite Disordered Network and Their Iodine Doping Effects. , 2000 .

[3002]  Koji Kawamura,et al.  Turbulence-Induced Tube Vibration by Parallel Air-Water Two-Phase Jet Flow , 2000 .

[3003]  R. A. Mashelkar,et al.  Slipping fluids: a unified transient network model , 2000 .

[3004]  Raymond Jeanloz,et al.  Equation of state and strength of natural majorite , 2000 .

[3005]  John Turnpenny,et al.  Thermal balance of livestock. 1. A parsimonious model , 2000 .

[3006]  Robert Arslanbekov,et al.  Model of the cathode region and gas temperature of a dc glow discharge at high current density , 2000 .

[3007]  R. Shankar Subramanian,et al.  The migration of a drop in a uniform temperature gradient at large Marangoni numbers , 2000 .

[3008]  Franz Durst,et al.  Effect of acoustic streaming on the mass transfer from a sublimating sphere , 2000 .

[3009]  Peter Lund,et al.  Daylight optimization of multifunctional solar facades , 2000 .

[3010]  C. Gueymard.  Prediction and Performance Assessment of Mean Hourly Global Radiation , 2000 .

[3011]  Yutaka Tamaura,et al.  Coal gasification by CO2 gas bubbling in molten salt for solar/fossil energy hybridization , 2000 .

[3012]  Joel Darmstadter,et al.  Winner, Loser, or Innocent Victim? Has Renewable Energy Performed As Expected? , 2000 .

[3013]  Didier Huin,et al.  Iron drop ejection into slags by bursting gas bubbles , 2000 .

[3014]  W. D. Griffiths.  Modelled heat transfer coefficients for Al–7 wt-%Si alloy castings unidirectionally solidified horizontally and vertically downwards , 2000 .

[3015]  Zone-Ching Lin,et al.  Hot rolling of an aluminum–copper sandwich flat strip with the three-dimensional finite element method , 2000 .

[3016]  V. Prasad,et al.  An integrated model for dendritic and planar interface growth and morphological transition in rapid solidification , 2000 .

[3017]  L. W. Byrd,et al.  Thermoelastic stress analysis applied to fully reversed bending fatigue , 2000 .

[3018]  T. Koyaguchi,et al.  Simultaneous crystallization and melting at both the roof and floor of crustal magma chambers: Experimental study using NH4Cl–H2O binary eutectic system , 2000 .

[3019]  Pierre Genthon,et al.  The onset of natural convection in vertical fault planes:consequences for the thermal regime in crystalline basementsand for heat recovery experiments , 2000 .

[3020]  K. A. Yih,et al.  Effect of uniform blowing/suction on MHD-natural convection over a horizontal cylinder: UWT or UHF , 2000 .

[3021]  Satyajit Roy,et al.  Nonuniform multiple slot injection (suction) or wall enthalphy into a steady compressible laminar boundary layer , 2000 .

[3022]  Kyoung-Woo Park, Hi-Yong Pak,et al.  CHARACTERISTICS OF THREE-DIMENSIONAL FLOW, HEAT, AND MASS TRANSFER IN A CHEMICAL VAPOR DEPOSITION REACTOR , 2000 .

[3023]  G. Carotenuto,et al.  THE EFFECTIVE THERMAL CONDUCTIVITY OF PACKED BEDS OF SPHERES FOR A FINITE CONTACT AREA , 2000 .

[3024]  Asad Majid.  Heat Transfer to Liquid Lithium in a Straight Duct in the Presence of a Transverse Magnetic Field and a Gravity Field , 2000 .

[3025]  Indrek S. Wichman,et al.  Heat transfer analysis of a diffusion flame leading edge near a cold, chemically inert surface , 2000 .

[3026]  Pan-Chio Tuan, Ming-Ching Ju,et al.  THE VALIDATION OF THE ROBUST INPUT ESTIMATION APPROACH TO TWO-DIMENSIONAL INVERSE HEAT CONDUCTION PROBLEMS , 2000 .

[3027]  P. Chaturani,et al.  Momentum and heat transfer from a continuous moving surface to a power-law fluid , 2000 .

[3028]  Ovadia Shoham,et al.  Prediction of slug liquid holdup : horizontal to upward vertical flow , 2000 .

[3029]  Shigeho Noda,et al.  Numerical simulation of natural convection with density inversion in a square cavity , 2000 .

[3030]  Ali J. Chamkha.  Non‐similar solutions for heat and mass transfer by hydro‐magnetic mixed convection flow over a plate in porous media with surface suction or injection , 2000 .

[3031]  C. Leung,et al.  Numerical simulation of laminar forced convection in an air-cooled horizontal printed circuit board assembly , 2000 .

[3032]  Uwe Schnell,et al.  On the application of different turbulence models for the computation of fluid flow and combustion processes in small scale wood heaters , 2000 .

[3033]  C. P. Tso,et al.  Flow boiling critical heat flux of FC-72 from flush-mounted and protruded simulated chips in a vertical rectangular channel , 2000 .

[3034]  C. Mészáros,et al.  MATHEMATICAL AND PHYSICAL FOUNDATIONS OF DRYING THEORIES , 2000 .

[3035]  Otto Molerus.  Fluid mechanics in terms of eigenparameters. Part I : Fundamentals , 2000 .

[3036]  William G. Gray,et al.  Macroscale equilibrium conditions for two-phase flow in porous media , 2000 .

[3037]  T. F. Dixon,et al.  Computational modelling of combustion instability in bagasse-fired furnaces , 2000 .

[3038]  Yasuo Kurosaki,et al.  Radiative characteristics of fibers with a large size parameter , 2000 .

[3039]  Dan M. Frangopol,et al.  MULTISCALE MODELING OF INTERACTIVE DIFFUSION PROCESSES IN CONCRETE , 2000 .

[3040]  C. H. Chen,et al.  Heat transfer characteristics of a non-isothermal surface moving parallel to a free stream , 2000 .

[3041]  Edoardo Bucchignani,et al.  Horizontal thermal convection in a shallow cavity: oscillatory regimes and transition to chaos , 2000 .

[3042]  Abir Arbel,et al.  NUMERICAL CALCULATIONS FOR COMBINED CONDUCTION AND RADIATION TRANSIENT HEAT TRANSFER IN A SEMITRANSPARENT MEDIUM , 2000 .

[3043]  L. Yates,et al.  Aerothermodynamic Performance Enhancement of Sphere-Cones Using the Artificially Blunted Leading-Edge Concept , 2000 .

[3044]  Tae-Ho Song,et al.  Natural convection around horizontal downward-facing plate with rectangular grooves: experiments and numerical simulations , 2000 .

[3045]  Giampietro Fabbri,et al.  Optimum Profiles for Asymmetrical Longitudinal Fins in Annular Ducts , 2000 .

[3046]  Artur Maciag,et al.  Stability of solutions of the overdetermined inverse heat conduction problems when discretized with respect to time , 2000 .

[3047]  Rama Subba Reddy Gorla,et al.  Combined convection in non‐Newtonian fluids along a nonisothermal vertical plate in a porous medium , 2000 .

[3048]  G. Continillo,et al.  Experimental and numerical study of flammability limits of gaseous mixtures in porous media , 2000 .

[3049]  W. J. Korchinsky,et al.  The heating, by viscous dissipation, of liquids flowing across an enclosed rotating disc , 2000 .

[3050]  I. A. Hassanien,et al.  Mixed convection boundary layer flow of a micropolar fluid on a horizontal flat plate with power law variation in surface temperature , 2000 .

[3051]  Eugene B. Postnikov,et al.  Cerenkov-Type Magnetoacoustic Oscillations in a Viscoelastic Cylinder , 2000 .

[3052]  Rama Subba Reddy Gorla,et al.  Nonsimilar Solutions for Mixed Convection in Non-Newtonian Fluids Along a Wedge with Variable Surface Heat Flux in a Porous Medium , 2000 .

[3053]  P. S. Cumber.  Ray effect mitigation in jet fire radiation modelling , 2000 .

[3054]  Orhan Büyükalaca,et al.  Optimum shape and dimensions of ducts for convective heat transfer in laminar flow at constant wall temperature , 2000 .

[3055]  Salah S. Ibrahim,et al.  Experimental study of premixed flame propagation over various solid obstructions , 2000 .

[3056]  B. Pulvirenti,et al.  Forced convection with slug flow and viscous dissipation in a rectangular duct , 2000 .

[3057]  Dominique Morvan,et al.  Numerical simulation of a methane/air radiating turbulent diffusion flame , 2000 .

[3058]  Nevin Selçuk,et al.  Performance of discrete ordinates method in a gas turbine combustor simulator , 2000 .

[3059]  Rama Bhargava,et al.  Numerical study of heat transfer characteristics of the micropolar boundary layer near a stagnation point on a moving wall , 2000 .

[3060]  Eran Sher,et al.  The effect of an electric field on the shape of co-flowing and candle-type methane–air flames , 2000 .

[3061]  Keh-Chin Chang,et al.  Revisiting the Reynolds-averaged energy equation in near-wall turbulence models , 2000 .

[3062]  Akio Miyara,et al.  Condensation heat transfer and flow pattern inside a herringbone-type micro-fin tube , 2000 .

[3063]  Andrzej J. Nowak,et al.  Heat transfer analysis of the continuous casting process by the front tracking BEM , 2000 .

[3064]  Cha'o-Kuang Chen,et al.  Numerical study of turbulent heat transfer and flow characteristics of hot flow over a sudden-expansion with base mass injection , 2000 .

[3065]  B. Desmet,et al.  Local convective heat exchanges from a rotor facing a stator , 2000 .

[3066]  Owen Richmond,et al.  Mold Surface Wavelength Effect on Gap Nucleation in Solidification , 2000 .

[3067]  Khaled J. Hammad,et al.  The effect of hydrodynamic conditions on heat transfer in a complex viscoplastic flow field , 2000 .

[3068]  G. Morini.  Analytical determination of the temperature distribution and Nusselt numbers in rectangular ducts with constant axial heat flux , 2000 .

[3069]  C. P. Tso,et al.  Combined evaporating meniscus-driven convection and radiation in annular microchannels for electronics cooling application , 2000 .

[3070]  W. Kast,et al.  Mass transfer within the gas-phase of porous media , 2000 .

[3071]  John G. Brisson,et al.  The thermal conductivity of Kapton HN between 0.5 and 5 K , 2000 .

[3072]  B. Wang,et al.  ‘Wall-adjacent layer’ analysis for developed-flow laminar heat transfer of gases in microchannels , 2000 .

[3073]  A. Carlos Fernandez-Pello,et al.  Fire initiation and spread in overloaded communication system cable trays , 2000 .

[3074]  P. Kandaswamy,et al.  Nonlinear convection in a rotating square cavity , 2000 .

[3075]  S. A. Sherif,et al.  Effect of Slip Velocity and Heat Transfer on the Condensed Phase Momentum Flux of Supersonic Nozzle Flows , 2000 .

[3076]  Dewei Qi,et al.  Lattice-Boltzmann simulations of fluidization of rectangular particles , 2000 .

[3077]  C. C. Chan,et al.  An implicit enthalpy formulation for oxidation of nuclear reactor fuel cladding by steam , 2000 .

[3078]  Tetsuo Hirata,et al.  Crystal ice formation of solution and its removal phenomena at cooled horizontal solid surface: Part II: onset of ice removal condition , 2000 .

[3079]  Iztok Tiselj,et al.  Some Comments on the Behavior of the RELAP5 Numerical Scheme at Very Small Time Steps , 2000 .

[3080]  Sushil H. Bhavnani,et al.  Toward optimizing enhanced surfaces for passive immersion cooled heat sinks , 2000 .

[3081]  Krzysztof Ciesielski,et al.  EXTENSION OF THE NEURAL NETWORKS OPERATING RANGE BY THE APPLICATION OF DIMENSIONLESS NUMBERS IN PREDICTION OF HEAT TRANSFER COEFFICIENTS , 2000 .

[3082]  Ian Turner,et al.  The use of a coupled computational model for studying the microwave heating of wood , 2000 .

[3083]  Sarit K. Das,et al.  Use of artificial neural network and leveque analogy for the exergy analysis of regenerator beds , 2000 .

[3084]  B. N. Prasad,et al.  Investigation of twisted tape inserted solar water heaters—heat transfer, friction factor and thermal performance results , 2000 .

[3085]  Sudhakar Neti,et al.  Measurements of effectiveness in a silica gel rotary exchanger , 2000 .

[3086]  K. L. Tay,et al.  Control of Ventilation Airflow for Tunnel Fire Safety , 2000 .

[3087]  Jose C. F. Pereira,et al.  Two-dimensional Numerical Study of Combustion and Pollutants Formation in Porous Burners , 2000 .

[3088]  Kan-Ichi Hayakawa,et al.  Heat and Moisture Transfer and Hygrophysical Changes in Elastoplastic Hollow Cylinder‐food During Drying , 2000 .

[3089]  R.A. Sadykov.  VACUUM DRYING OF DISPERSED MATERIALS FROM MULTICOMPONENT LIQUID SYSTEMS: VERIFICATION OF MODEL , 2000 .

[3090]  Tayfun Babadagli.  OPTIMUM STEAM INJECTION STRATEGIES FOR NATURALLY FRACTURED RESERVOIRS , 2000 .

[3091]  Evangelos Tsotsas,et al.  A simple and coherent set of coefficients for modelling of heat and mass transport with and without chemical reaction in tubes filled with spheres , 2000 .

[3092]  E. Pallai,et al.  DRYING EXPERIMENTS WITH ALO(OH) SUSPENSION OF HIGH PURITY AND FINE PARTICULATE SIZE TO DESIGN AN INDUSTRIAL SCALE DRYER , 2000 .

[3093]  G. T. Polley,et al.  An Algorithm for Cost Comparison of Optimized Shell-and-Tube Heat Exchangers with Tube Inserts and Plain Tubes , 2000 .

[3094]  P. Ganesan,et al.  On diffusion of chemically reactive species in convective flow along a vertical cylinder , 2000 .

[3095]  Adel A. Hegazy.  Performance of flat plate solar air heaters with optimum channel geometry for constant/variable flow operation , 2000 .

[3096]  Srichand Hinduja,et al.  Predicting heat extraction due to boiling in the cooling channels during the pressure die casting process , 2000 .

[3097]  Chongwen Cao,et al.  Mathematical simulation of temperature fields in a stored grain bin due to internal heat generation , 2000 .

[3098]  Stephan Schraml,et al.  Soot temperature measurements and implications for time-resolved laser-induced incandescence (TIRE-LII) , 2000 .

[3099]  V. V. Kalinchak,et al.  Stable and critical regimes of heat and mass transfer of a carbon particle in a laser-radiation field , 2000 .

[3100]  J. Azevedo,et al.  Modelling the integration of a compact plate steam reformer in a fuel cell system , 2000 .

[3101]  Jesse Zhu,et al.  Heat transfer between gas–solids suspension and immersed surface in an upflow fluidized bed (riser) , 2000 .

[3102]  John H. Cushman,et al.  Thermomechanical theories for swelling porous media with microstructure , 2000 .

[3103]  Ali J. Chamkha.  Flow of Two-Immiscible Fluids in Porous and Nonporous Channels , 2000 .

[3104]  Enrique Maciá.  Thermal conductivity of one-dimensional Fibonacci quasicrystals , 2000 .

[3105]  Daniel R. Rousse,et al.  Numerical predictions of two-dimensional conduction, convection, and radiation heat transfer. I. Formulation , 2000 .

[3106]  Sandra L. Olson,et al.  Buoyant low-stretch diffusion flames beneath cylindrical PMMA samples , 2000 .

[3107]  Valéry Masson,et al.  A Physically-Based Scheme For The Urban Energy Budget In Atmospheric Models , 2000 .

[3108]  Ruey-Jen Yang,et al.  Flow bifurcation and heat transfer in a spherical gap , 2000 .

[3109]  A Baudot,et al.  Glass-forming tendency in the system water-dimethyl sulfoxide. , 2000, Cryobiology.

[3110]  J Crezee,et al.  Modelling individual temperature profiles from an isolated perfused bovine tongue. , 2000, Physics in medicine and biology.

[3111]  R. Zernicke,et al.  Cryobiology of articular cartilage: ice morphology and recovery of chondrocytes. , 2000, Cryobiology.

[3112]  S Evans,et al.  Electromagnetic rewarming: the effect of CPA concentration and radio source frequency on uniformity and efficiency of heating. , 2000, Cryobiology.

[3113]  Peter Vadasz,et al.  Subcritical transitions to chaos and hysteresis in a fluid layer heated from below , 2000 .

[3114]  John H. Lienhard,et al.  Evaporative cooling of continuously drawn glass fibers by water sprays , 2000 .

[3115]  E. R. Mcfadden,et al.  Integrated response of the upper and lower respiratory tract of asthmatic subjects to frigid air. , 2000, Journal of applied physiology.

[3116]  S. Fuchino,et al.  Heat transfer characteristics of liquid nitrogen for cyclic heating , 2000, IEEE Transactions on Applied Superconductivity.

[3117]  A. V. Murthy,et al.  Radiative Calibration of Heat-Flux Sensors at NIST: Facilities and Techniques , 2000, Journal of research of the National Institute of Standards and Technology.

[3118]  Sandip Mazumder, Alfred Kersch.  A FAST MONTE CARLO SCHEME FOR THERMAL RADIATION IN SEMICONDUCTOR PROCESSING APPLICATIONS , 2000 .

[3119]  Hsin-Sen Chu,et al.  Effect of interface thermal resistance on heat transfer in a composite medium using the thermal wave model , 2000 .

[3120]  Hong Zhou,et al.  Thermotropic Liquid Crystalline Polymer Fibers , 2000, SIAM J. Appl. Math..

[3121]  Robert Horton,et al.  Determining Soil Water Flux and Pore Water Velocity by a Heat Pulse Technique , 2000 .

[3122]  Yong-Seog Kim,et al.  Finite element analysis on the effect of Si phase melting in combustion synthesis of MoSi2 , 2000 .

[3123]  C. Gonzalez-Rivera,et al.  On the local microstructural characteristics observed in sand cast Al–Si alloys , 2000 .

[3124]  C. Guedes Soares,et al.  Probabilistic modelling of offshore fires , 2000 .

[3125]  Jennifer X. Wen,et al.  CFD modelling of confined jet fires under ventilation-controlled conditions , 2000 .

[3126]  E. Lavernia,et al.  Thermal behavior during droplet-based deposition , 2000 .

[3127]  J. N. Reddy,et al.  Numerical Simulation of Tubular Blown Film Processing , 2000 .

[3128]  S. Z. Shuja,et al.  Heat transfer characteristics of flow past a rectangular protruding body , 2000 .

[3129]  Alvaro Valencia,et al.  TURBULENT FLOW AND HEAT TRANSFER IN A CHANNEL WITH A SQUARE BAR DETACHED FROM THE WALL , 2000 .

[3130]  Ching-Yang Cheng, Chi-Chang Wang,et al.  FORCED CONVECTION IN MICROPOLAR FLUID FLOW OVER A WAVY SURFACE , 2000 .

[3131]  Seung Wook Baek,et al.  The effects of radiation on natural convection in a rectangular enclosure divided by two partitions , 2000 .

[3132]  H. Bufler,et al.  Stationary heat conduction in a macro- and microperiodically layered solid , 2000 .

[3133]  Jan A. Snyman,et al.  Using mathematical optimization in the CFD analysis of a continuous quenching process , 2000 .

[3134]  Guido D. Salvucci,et al.  Analysis of rate-limiting processes in soil evaporation with implications for soil resistance models , 2000 .

[3135]  W.W.M. Siu,et al.  Transient effect on the constriction resistance between spheres , 2000 .

[3136]  Yogeshwar Sahai,et al.  Mathematical modeling of thermally induced stresses in two-roll melt drag thin strip casting of steel , 2000 .

[3137]  Manish Gupta,et al.  Mathematical Modeling of Fluid Flow, Heat Transfer, and Solidification in Two-roll Melt Drag Thin Strip Casting of Steel , 2000 .

[3138]  Koichi Ozaki,et al.  Liquid-Liquid Direct Contact Heat Exchange Using a Perfluorocarbon Liquid for Waste Heat Recovery. Heat Transfer Characteristics Obtained with Perfluorocarbon Droplets Descending in a Hot Water Medium. , 2000 .

[3139]  Akira Nakayama,et al.  Conjugate numerical model for cooling a fluid flowing through a spiral coil immersed in a chilled water container , 2000 .

[3140]  Yang-Yao Niu, Chih-Shung Tsai.  SIMULATION OF EROSION BY THE DILUTE PARTICULATE FLOW IMPACT , 2000 .

[3141]  J. M. Khodadadi,et al.  EFFECTS OF THERMOCAPILLARY CONVECTION ON MELTING WITHIN DROPLETS , 2000 .

[3142]  W. R. Peltier,et al.  On scaling relations in time‐dependent mantle convection and the heat transfer constraint on layering , 2000 .

[3143]  Arne J. Pearlstein,et al.  Simulation of vertical Bridgman growth of benzene, a material with anisotropic solid-phase thermal conductivity , 2000 .

[3144]  Andrew Yeckel,et al.  Effect of accelerated crucible rotation on melt composition in high-pressure vertical Bridgman growth of cadmium zinc telluride , 2000 .

[3145]  Hiroko Yokura,et al.  Changes in Disposable Diaper Properties Caused by Wetting , 2000 .

[3146]  Mary Anne White,et al.  Thermal conductivity of crystalline particulate materials , 2000 .

[3147]  Wilson K. S. Chiu,et al.  Continuous chemical vapor deposition processing with a moving finite thickness susceptor , 2000 .

[3148]  Telem Gok Sadikoglu,et al.  Thermo-Insulating Properties of Perpendicular-Laid Versus Cross-Laid Lofty Nonwoven Fabrics , 2000 .

[3149]  Lin Li,et al.  Laser ablation machining of metal/polymer composite materials , 2000 .

[3150]  I. V. Samarasekera,et al.  Mould heat transfer and continuously cast billet quality with mould flux lubrication Part 1 Mould heat transfer , 2000 .

[3151]  Valdis Bojarevics,et al.  Modeling the dynamics of magnetic semilevitation melting , 2000 .

[3152]  Edgar L. Andreas,et al.  The Role of Whitecap Bubbles in Air–Sea Heat and Moisture Exchange , 2000 .

[3153]  Md. Anwar Hossain,et al.  Mixed convection flow from a vertical flat plate with temperature dependent viscosity , 2000 .

[3154]  Tetsuo Hirata,et al.  Crystal ice formation of solution and its removal phenomena at cooled horizontal solid surface. Part I : ice removal phenomena , 2000 .

[3155]  Wojciech T Konka.  Natural convection heat transfer around horizontal tube in vertical slot , 2000 .

[3156]  A. M. Krouchinin,et al.  Modeling of electrical and thermal processes in stream plasmatrons , 2000 .

[3157]  Fernando T. Pinho,et al.  Effects of inner cylinder rotation on laminar flow of a Newtonian fluid through an eccentric annulus , 2000 .

[3158]  Victoria E. Cachorro,et al.  Comparison of aerosol optical thickness retrieval from spectroradiometer measurements and from two radiative transfer models , 2000 .

[3159]  P. Ganesan,et al.  Unsteady free convection MHD flow past a vertical cylinder with heat and mass transfer , 2000 .

[3160]  A K Louis,et al.  Approximate inverse for a one-dimensional inverse heat conduction problem , 2000 .

[3161]  A. Sahin,et al.  Effective thermal conductivity of frost during the crystal growth period , 2000 .

[3162]  Sami A. Al-Sanea,et al.  The effect of extrusion slit on the flow and heat-transfer characteristics from a continuously moving material with suction or injection , 2000 .

[3163]  Dan Poliševski,et al.  Optimal quasiperiodic design for a heat transfer problem , 2000 .

[3164]  Ken-ichi Abe,et al.  Nonlinear eddy viscosity modelling for turbulence and heat transfer near wall and shear-free boundaries , 2000 .

[3165]  Moh'd Abu-Qudais,et al.  Numerical solutions of the Navier‐Stokes and energy equations for laminar incompressible flow past parabolic bodies , 2000 .

[3166]  Muhammad M. Rahman,et al.  Axial steady free surface jet impinging over a flat disk with discrete heat sources , 2000 .

[3167]  A. R. Dorokhov,et al.  Calculation of the surface temperature of liquid under conditions of combined heat and mass transfer , 2000 .

[3168]  Liqiu Wang,et al.  Solution structure of hyperbolic heat-conduction equation , 2000 .

[3169]  Ali J. Chamkha,et al.  Similarity solutions for hydromagnetic mixed convection heat and mass transfer for Hiemenz flow through porous media , 2000 .

[3170]  G. N. Kruzhilin,et al.  Critical heat load upon pool liquid boiling , 2000 .

[3171]  Hiroshi Iwai,et al.  The effects of duct inclination angle on laminar mixed convective flows over a backward-facing step , 2000 .

[3172]  Hiroshi Iwai,et al.  Flow and heat transfer characteristics of backward-facing step laminar flow in a rectangular duct , 2000 .

[3173]  Gad Hetsroni,et al.  Thermal patterns on a heated wall in vertical air–water flow , 2000 .

[3174]  Mohamed Mohandes,et al.  USE OF RADIAL BASIS FUNCTIONS FOR ESTIMATING MONTHLY MEAN DAILY SOLAR RADIATION , 2000 .

[3175]  M. Gonzalez,et al.  Asymptotic evolution of a passive scalar field advected by an homogeneous turbulent shear flow , 2000 .

[3176]  D. A. Zumbrunnen,et al.  Alterations to coherent flow structures and heat transfer due to pulsations in an impinging air-jet , 2000 .

[3177]  Anvar Kacimov,et al.  Conduction through a grooved surface and Sierpinsky fractals , 2000 .

[3178]  Tae-Ho Song,et al.  Data Base of WSGGM-based Spectral Model for Radiation Properties of Combustion Products , 2000 .

[3179]  Jocelyn Bonjour,et al.  Experimental study of the coalescence phenomenon during nucleate pool boiling , 2000 .

[3180]  Tommaso Astarita,et al.  Thermofluidynamic analysis of the flow in a sharp 180° turn channel , 2000 .

[3181]  Ching-Chang Chieng,et al.  Computation of enhanced turbulent heat transfer in a channel with periodic ribs , 2000 .

[3182]  Jungho Lee,et al.  The effect of nozzle aspect ratio on stagnation region heat transfer characteristics of elliptic impinging jet , 2000 .

[3183]  Nicola Pearsall,et al.  Statistical investigation of the optimal averaging time for solar irradiance on horizontal and vertical surfaces in the UK , 2000 .

[3184]  X. Fang,et al.  A Study of the U-Factor of the Window with a High-Reflectivity Venetian Blind , 2000 .

[3185]  J. K. Platten,et al.  Linear stability of mixed convection flows in horizontal rectangular channels of finite transversal extension heated from below , 2000 .

[3186]  John H. Merkin,et al.  Free convection near a stagnation point in a porous medium resulting from an oscillatory wall temperature , 2000 .

[3187]  Sadik Kakaç,et al.  A method to predict two-phase pressure drop using condensation heat transfer data , 2000 .

[3188]  M. Fiebig,et al.  Heat transfer enhancement of finned oval tubes with staggered punched longitudinal vortex generators , 2000 .

[3189]  Guy Lauriat,et al.  Thermoconvective instabilities in a narrow horizontal air-filled annulus , 2000 .

[3190]  Kikuji Chida.  Surface temperature of a flat plate of finite thickness under conjugate laminar forced convection heat transfer condition , 2000 .

[3191]  K. Nagashetty,et al.  Forebody convective hypersonic heat transfer measurements overlarge-angle blunt cones , 2000 .

[3192]  R. Viskanta,et al.  Three-dimensional conjugate heat transfer in the microchannel heat sink for electronic packaging , 2000 .

[3193]  G. A. Mastekbayeva,et al.  Effect of dust on the transmittance of low density polyethylene glazing in a tropical climate , 2000 .

[3194]  W. Spirkl,et al.  Optimized reflectors for non-tracking solar collectors with tubular absorbers , 2000 .

[3195]  Ruzhu Wang,et al.  An energy efficient hybrid system of solar powered water heater and adsorption ice maker , 2000 .

[3196]  Matthias Wettermann,et al.  Flow boiling heat transfer characteristics of wide-boiling mixtures , 2000 .

[3197]  Pavel Moravec,et al.  Trapping of impurity molecules in condensation from mixtures of gases , 2000 .

[3198]  Joo-Sik Yoo,et al.  Numerical investigation of the transient heat transfer in the inviscid stagnation flow with solidification , 2000 .

[3199]  M. Sakami,et al.  Application of a modified discrete ordinates method to two-dimensional enclosures of irregular geometry , 2000 .

[3200]  Y. Xuan,et al.  Heat transfer enhancement of nanofluids , 2000 .

[3201]  Mahmood Yaghoubi,et al.  Numerical study of turbulent flow and heat transfer from an array of thick plates , 2000 .

[3202]  Alvaro Valencia,et al.  Experimental study of transition to turbulence of a round thermal plume by ultrasound scattering , 2000 .

[3203]  J Kubie,et al.  Velocity of long bubbles in horizontally oscillating vertical pipes , 2000 .

[3204]  G. Lauriat,et al.  Numerical study of heat transfer in a non-Newtonian Carreau-fluid between rotating concentric vertical cylinders , 2000 .

[3205]  Helge I. Andersson,et al.  Relaminarization of turbulent flow in the entrance region of a rapidly rotating channel , 2000 .

[3206]  Simon C. M. Yu,et al.  Steady and pulsatile flow studies in Abdominal Aortic Aneurysm models using Particle Image Velocimetry , 2000 .

[3207]  J. G. Brisson,et al.  Experimental Evaluation of a Single Stage Superfluid Stirling Refrigerator Using a Large Plastic Recuperator , 2000 .

[3208]  Gábor Szederkényi,et al.  Grey box fault detection of heat exchangers , 2000 .

[3209]  M. P. Maiya,et al.  Equilibrium low pressure generator temperatures for double-effect series flow absorption refrigeration systems , 2000 .

[3210]  Emrod Elisante,et al.  Application of μ-Interaction Measures for Decentralized Temperature Control of Packed-Bed Chemical Reactor , 2000 .

[3211]  Samuel M. Sami,et al.  Prediction of condensation characteristics of alternatives to R-502 inside air–refrigerant enhanced surface tubing , 2000 .

[3212]  Rachid Bessaïh,et al.  Turbulent natural convection cooling of electronic components mounted on a vertical channel , 2000 .

[3213]  A. Gabrielsson,et al.  Thermal Energy Storage in Soils at Temperatures Reaching 90°C , 2000 .

[3214]  M. Trovant,et al.  Finding boundary conditions: A coupling strategy for the modeling of metal casting processes: Part I. Experimental study and correlation development , 2000 .

[3215]  Suresh V. Garimella,et al.  Heat transfer from pin-fin heat sinks under multiple impinging jets , 2000 .

[3216]  Norman Epstein,et al.  Testing a mathematical model for initial chemical reaction fouling using a dilute protein solution , 2000 .

[3217]  S. Klimas,et al.  Thermal resistance of steam‐generator tube deposits under single‐phase forced convection and flow‐boiling heat transfer , 2000 .

[3218]  Josse De Baerdemaeker,et al.  Computational fluid dynamics modelling and validation of the temperature distribution in a forced convection oven , 2000 .

[3219]  Qingfeng Yang,et al.  Investigation on fouling behaviors of low-energy surface and fouling fractal characteristics , 2000 .

[3220]  D A Blank,et al.  Cooling and heating rate limits of a reversed reciprocating ericsson cycle at steady state , 2000 .

[3221]  Tirto Prakoso,et al.  Two-Phase Bubble Formation with Condensation at Nozzle Submerged in Immiscible Liquid , 2000 .

[3222]  M. A. Barron-Meza,et al.  Physical and mathematical models of steel flow and heat transfer in a tundish heated by plasma , 2000 .

[3223]  Koichi Katsurayama,et al.  Heat and mass transfer characteristics in adsorption of water vapor for silica gel packed bed adsorber , 2000 .

[3224]  Derek H. Lister,et al.  The fouling of alloy‐800 heat exchange surfaces by magnetite particles , 2000 .

[3225]  Samuel M. Sami,et al.  Two‐phase flow boiling characteristics of alternatives to R‐22 inside air/refrigerant enhanced surface tubing , 2000 .

[3226]  R. A. Barnes,et al.  Thermal and hemodynamic responses to postoperative rewarming with a sub-atmospheric pressure device ☆ , 2000 .

[3227]  Ali J. Chamkha.  Transient hydromagnetic three-dimensional natural convection from an inclined stretching permeable surface , 2000 .

[3228]  E. Bilgen,et al.  Passive Solar Massive Wall Systems With Fins Attached on the Heated Wall and Without Glazing , 2000 .

[3229]  M. Lin,et al.  A new cruciform burner and its turbulence measurements for premixed turbulent combustion study , 2000 .

[3230]  B Rubinsky,et al.  Transplantation of mammalian livers following freezing: vascular damage and functional recovery. , 2000, Cryobiology.

[3231]  L. Mcgann,et al.  Cell-cell contact affects membrane integrity after intracellular freezing. , 2000, Cryobiology.

[3232]  C A Van Ee,et al.  Quantifying skeletal muscle properties in cadaveric test specimens: effects of mechanical loading, postmortem time, and freezer storage. , 2000, Journal of biomechanical engineering.

[3233]  B. Hammer,et al.  Rapid MR imaging of cryoprotectant permeation in an engineered dermal replacement. , 2000, Cryobiology.

[3234]  Charles Meneveau,et al.  Subgrid-Scale Dissipation in the Atmospheric Surface Layer: Effects of Stability and Filter Dimension , 2000 .

[3235]  Alain Cloutier,et al.  Determination of the effective water conductivity of red pine sapwood , 2000, Wood Science and Technology.

[3236]  Alain Cloutier,et al.  Experimental determination of the convective heat and mass transfer coefficients for wood drying , 2000, Wood Science and Technology.

[3237]  Guohua Chen,et al.  Theoretical study of fluidized-bed drying with microwave heating , 2000 .

[3238]  Jan Fransaer,et al.  Solidification of Ga–Mg–Zn in a gas-filled drop tube: Experiments and modeling , 2000 .

[3239]  Philippe R. Spalart,et al.  Mechanisms of transition and heat transfer in a separation bubble , 2000, Journal of Fluid Mechanics.

[3240]  Mansoo Choi,et al.  EFFECT OF RADIATIVE TRANSFER ON THE THERMOPHORETIC PARTICLE DEPOSITION AROUND A CIRCULAR CYLINDER IN A UNIFORM CROSS FLOW , 2000 .

[3241]  Hideo Inaba,et al.  NUMERICAL STUDY ON THE LIMITING CHARACTERISTICS OF AN OPEN-TYPE WATER-COOLED FLAT-PLATE SOLAR COLLECTOR , 2000 .

[3242]  Honda Wu,et al.  Mass Transfer Correlation for Dehumidification of Air in a Packed Absorber with an Inverse U-Shaped Tunnel , 2000 .

[3243]  L. Papageorgiou,et al.  Optimal Cleaning Policies in Heat Exchanger Networks under Rapid Fouling , 2000 .

[3244]  S Gilham,et al.  Mitigation of dense gas releases within buildings: validation of CFD modelling. , 2000, Journal of hazardous materials.

[3245]  H. P. Garg,et al.  Techno-economic analysis of a multi-stage stacked tray (MSST) solar still , 2000 .

[3246]  G. N. Tiwari,et al.  Annual performance of an active solar distillation system , 2000 .

[3247]  I. Sezai,et al.  Natural convection in a rectangular cavity heated from below and cooled from top as well as the sides , 2000 .

[3248]  Ofodike A. Ezekoye,et al.  Kinetic and Fuel Property Effects on Forward Smoldering Combustion , 2000 .

[3249]  R. E. Critoph,et al.  A prototype of a fast cycle adsorption refrigerator utilizing a novel carbon—aluminium laminate , 2000 .

[3250]  Wen-Jei Yang, Kentaro Tsutsui.  OVERVIEW OF BOILING ON MICROSTRUCTURES - MACRO BUBBLES FROM MICRO HEATERS , 2000 .

[3251]  Taofang Zeng, Gang Chen.  ENERGY CONVERSION IN HETEROSTRUCTURES FOR THERMIONIC COOLING , 2000 .

[3252]  Hsien‐I You,et al.  Experimental study on heat transfer and friction in pin fin channel flow , 2000 .

[3253]  Chin-Hsiang Cheng, Chun-Yin Wu.  AN APPROACH COMBINING BODY-FITTED GRID GENERATION AND CONJUGATE GRADIENT METHODS FOR SHAPE DESIGN IN HEAT CONDUCTION PROBLEMS , 2000 .

[3254]  Liang-Han Chien,et al.  Effect of Oil On the Boiling Performance of Structured and Porous Surfaces , 2000 .

[3255]  D. Yogi Goswami,et al.  Effectiveness of Heat and Mass Transfer Processes in a Packed Bed Liquid Desiccant Dehumidifier/Regenerator , 2000 .

[3256]  Pao-Tung Hsu,et al.  LAMINAR FILM CONDENSATION ON A FINITE-SIZE HORIZONTAL WAVY DISK WITH SUCTION AT THE WALL , 2000 .

[3257]  T.A.G. Langrish,et al.  THE DEVELOPMENT AND VALIDATION OF A SYSTEM MODEL FOR A COUNTERCURRENT CASCADING ROTARY DRYER , 2000 .

[3258]  U. S. Shivhare,et al.  STUDIES ON FRYING KINETICS AND QUALITY OF FRENCH FRIES , 2000 .

[3259]  E. Sato,et al.  Granulocyte-colony stimulating factor enhances anti-tumour effect of hyperthermia , 2000, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[3260]  E. Gerner,et al.  Heat-inducible vectors for use in gene therapy , 2000, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[3261]  M. Nakajo,et al.  The position of the opposite flat applicator changes the SAR and thermal distributions of the RF capacitive intracavitary hyperthermia , 2000, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[3262]  P R Stauffer,et al.  Directional power deposition from direct-coupled and catheter-cooled interstitial ultrasound applicators , 2000, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[3263]  T. Honda,et al.  The combined effect against colon-26 cells of heat treatment and immunization with heat treated colon-26 tumour cell extract , 2000, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[3264]  Y. Rong,et al.  Apoptosis induced by hyperthermia in Dunn osteosarcoma cell line in vitro , 2000, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[3265]  A K Datta,et al.  Coupled Electromagnetic and Termal Modeling of Microwave Oven Heating of Foods , 2000, The Journal of microwave power and electromagnetic energy : a publication of the International Microwave Power Institute.

[3266]  Elizabeth A. Repasky,et al.  Comparison of the effects of two different whole body hyperthermia protocols on the distribution of murine leukocyte populations , 2000, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[3267]  J. Lepock,et al.  Thermal destabilization of transmembrane proteins by local anaesthetics , 2000, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[3268]  G. Cruciani,et al.  Hyperthermia and paclitaxel-epirubicin chemotherapy: enhanced cytotoxic effect in a murine mammary adenocarcinoma , 2000, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[3269]  W Wiesbeck,et al.  Simulation of Microwave, Conventional and Hybrid Ovens Using a New Thermal Modeling Technique , 2000, The Journal of microwave power and electromagnetic energy : a publication of the International Microwave Power Institute.

[3270]  Y. H. Itoh,et al.  Pre-treatment with mild whole-body heating prevents gastric ulcer induced by restraint and water-immersion stress in rats , 2000, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[3271]  M Nakajo,et al.  The size and distance of the opposite flat applicator change the SAR and thermal distributions of RF capacitive intracavitary hyperthermia , 2000, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[3272]  J A White,et al.  An accurate, convective energy equation based automated meshing technique for analysis of blood vessels and tissues , 2000, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[3273]  Kazuyuki Saito,et al.  Dielectric-loaded coaxial-slot antenna for interstitial microwave hyperthermia: longitudinal control of heating patterns , 2000, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[3274]  M. Darwish,et al.  A UNIFIED FORMULATION OF THE SEGREGATED CLASS OF ALGORITHMS FOR FLUID FLOW AT ALL SPEEDS , 2000 .

[3275]  D. Lohse,et al.  Scaling in thermal convection: a unifying theory , 1999, Journal of Fluid Mechanics.

[3276]  J C Bischof,et al.  Supraphysiological thermal injury in Dunning AT-1 prostate tumor cells. , 1998, Journal of biomechanical engineering.

[3277]  D. Kopelman,et al.  Cryohemostasis of uncontrolled hemorrhage from liver injury. , 1998, Cryobiology.

[3278]  S. George Bankoff,et al.  Nonlinear dynamics in horizontal film boiling , 1998, Journal of Fluid Mechanics.

[3279]  Xiyun Lu,et al.  A dynamic subgrid-scale model for the large eddy simulation of stratified flow , 2000 .

[3280]  Yoshimasa Mizukami,et al.  Effect of Molten Steel Flow on Nonuniformity of Initially Solidified Shell , 2000 .

[3281]  Jun Le,et al.  Energy saving effect with honeycomb crown , 2000 .

[3282]  M. H. Davies,et al.  An investigation of the interaction of a molten droplet with a liquid weld pool surface : A computational and experimental approach , 2000 .

[3283]  Koulis Pericleous,et al.  A computational model for defect prediction in shape castings based on the interaction of free surface flow, heat transfer, and solidification phenomena , 2000 .

[3284]  Kiyohito Koyama,et al.  Development of shear flow thermal rheometer for direct measurement of crystallization fraction of polymer melts under shear deformation , 2000 .

[3285]  Tadeusz Telejko.  Investigation of sensitivity of the inverse method applied to determination of the thermal conductivity of steels , 2000 .

[3286]  Juan Monzó Cabrera,et al.  Kinetics of combined microwave and hot air drying of leather , 2000 .

[3287]  김성진,et al.  사각 밀폐용기 내부의 밀도최대치를 가지는 유체의 공진현상 ( Oscillatory enclosed buoyant convection of a fluid with the density maximum ) , 2000 .

[3288]  David A. Yuen,et al.  A thick pipe‐like heat‐transfer mechanism in the mantle: Nonlinear coupling between 3‐D convection and variable thermal conductivity , 2000 .

[3289]  Stephen Blake,et al.  On the deformation and freezing of enclaves during magma mixing , 2000 .

[3290]  Krzysztof Grysa,et al.  Heat transfer coefficient identification on the solid-fluid boundary with the phase change in the fluid , 2000 .

[3291]  Hans J. Rath,et al.  Experimental setup for low reynolds number calibration of thermal anemometers , 2000 .

[3292]  W. Gretler,et al.  Similarity solution of a collapsing cylindrical shock wave in a thermal radiating and conducting gas , 2000 .

[3293]  N. K. Mitra,et al.  Numerical Investigation of Convective Heat Transfer and Pressure Drop in Wavy Ducts , 2000 .

[3294]  Rodolfo D. Morales,et al.  NUMERICAL SIMULATION OF THE EFFECTS OF BUOYANCY FORCES AND FLOW CONTROL DEVICES ON FLUID FLOW AND HEAT TRANSFER PHENOMENA OF LIQUID STEEL IN A TUNDISH , 2000 .

[3295]  Chi-Chuan Wang,et al.  Effect of waffle height on the air-side performance of wavy fin-and-tube heat exchangers under dehumidifying conditions , 2000 .

[3296]  Qiang Liao,et al.  Augmentation of Turbulent Convective Heat Transfer in Tubes with Three-dimensional Internal Extended Surfaces , 2000 .

[3297]  A. K. Satapathy,et al.  Rewetting of an infinite slab with boundary heat flux , 2000 .

[3298]  Paulo L.C. Lage,et al.  Simultaneous heat and mass transfer during the ascension of superheated bubbles , 2000 .

[3299]  S. R. Mathur,et al.  A finite-volume scheme for radiative heat transfer in semitransparent media , 2000 .

[3300]  E. H. Amer,et al.  Experimental and theoretical evaluation of dynamic test procedures for solar flat-plate collectors , 2000 .

[3301]  Surapong Chirarattananon,et al.  Daylighting through light pipes in the tropics , 2000 .

[3302]  A. Carotenuto,et al.  A Comparison of Thermal Performances of Underground Power Cables in Dry and Saturated Soils , 2000 .

[3303]  M. Subhas Abel,et al.  Oscillatory Motion of a Viscoelastic Fluid over a Stretching Sheet in Porous Media , 2000 .

[3304]  S. P. Venkateshan,et al.  Accurate Determination of View Factors in Axisymmetric Enclosures with Shadowing Bodies Inside , 2000 .

[3305]  PengSheng Wei,et al.  Shape of a pore trapped in solid during solidification , 2000 .

[3306]  D. Andrew S. Rees,et al.  Vertical free convective boundary-layer flow in a porous medium using a thermal nonequilibrium model , 2000 .

[3307]  Giampietro Fabbri.  Effect of disuniformities in vapor saturation pressure and coolant velocity on vapor back flow phenomena in single-pass air-cooled condensers , 2000 .

[3308]  B. S. Dandapat,et al.  Heat transfer in a liquid film on an unsteady stretching surface , 2000 .

[3309]  A. A. Raptis.  Boundary Layer Flow of a Micropolar Fluid Through a Porous Medium , 2000 .

[3310]  Nader Saniei,et al.  An Experimental Study of Heat Transfer from a Disk Rotating in an Infinite Environment Including Heat Transfer Enhancement by Jet Impingement Cooling , 2000 .

[3311]  So Udo,et al.  Sky conditions at Ilorin as characterized by clearness index and relative sunshine , 2000 .

[3312]  H. K. Varma,et al.  Enhancement of Heat Transfer Rates by Coiled Wires During Forced Convective Condensation of R-22 Inside Horizontal Tubes , 2000 .

[3313]  P. Baker,et al.  Test cell analysis of the use of a supply air window as a passive solar component , 2000 .

[3314]  Wen-Quan Tao,et al.  Experimental Study on Developing and Fully Developed Fluid Flow and Heat Transfer in Annular-Sector Ducts , 2000 .

[3315]  Michael M. Ohadi,et al.  Heat Transfer Enhancement of Airflow in a Channel Using Corona Discharge , 2000 .

[3316]  A. Roos,et al.  Modelling the angular behaviour of the total solar energy transmittance of windows , 2000 .

[3317]  Milind A. Jog,et al.  Plasma flow over an array of particles , 2000 .

[3318]  Arthur T. Johnson,et al.  Flow Condensation in Smooth and Micro-fin Tubes with HCFC-22, HFC-134a and HFC-410A Refrigerants. Part I: Experimental Results , 2000 .

[3319]  Mehmet Esen.  Thermal performance of a solar-aided latent heat store used for space heating by heat pump , 2000 .

[3320]  Pei-feng Hsu,et al.  Modified YIX Method and Pseudoadaptive Angular Quadrature for Ray Effects Mitigation , 2000 .

[3321]  Zekai Şen,et al.  Solar irradiation polygon concept and application in Turkey , 2000 .

[3322]  Ali J. Chamkha,et al.  Hydromagnetic Coupled Heat and Mass Transfer by Natural Convection from a Permeable Constant Heat Flux Surface in Porous Media , 2000 .

[3323]  Wilfrido Rivera.  Experimental evaluation of a single-stage heat transformer used to increase solar pond’s temperature , 2000 .

[3324]  James H. Leylek,et al.  A detailed analysis of film-cooling physics: Part IV -- Compound-angle injection with shaped holes , 2000 .

[3325]  Chi-Chuan Wang.  Technology Review - A Survey of Recent Patents of Fin-and-Tube Heat Exchangers , 2000 .

[3326]  James E. Rannels.  The DOE office of solar energy technologies’ vision for advancing solar technologies in the new millennium , 2000 .

[3327]  Nail A. Gumerov,et al.  Dynamics of vapor bubbles with nonequilibrium phase transitions in isotropic acoustic fields , 2000 .

[3328]  Bernard Desmet,et al.  Influence of Convective Heat Exchange on a Rotating Disc in Superimposed Air Flow-Comparison Between Heat Pipe and Solid Discs , 2000 .

[3329]  David M. Pratt,et al.  "On-demand" Electrohydrodynamic (EHD) Heat Transfer Enhancement Using an Anionic Surfactant , 2000 .

[3330]  Spiros Papaefthimiou,et al.  CPC solar collectors with flat bifacial absorbers , 2000 .

[3331]  Andreas K. Athienitis,et al.  The effect of solar radiation on dynamic thermal performance of floor heating systems , 2000 .

[3332]  Dario Ambrosini,et al.  Sandwich holography for determining the convective heat transfer coefficient , 2000 .

[3333]  Nelson O. Moraga,et al.  Conjugate forced convection and heat conduction with freezing of water content in a plate shaped food , 2000 .

[3334]  Bor-Jang Tsai,et al.  Transient Analysis of 2-D Cylindrical Pin Fin with Constant Base Heat Flux and Tip Convective Effects , 2000 .

[3335]  M. E. Vieira,et al.  Determination of the void fraction and drift velocity in a two-phase flow with a boiling solar collector , 2000 .

[3336]  Michael M. Ohadi,et al.  Corona Discharge Effects on Heat Transfer and Pressure Drop in Tube Flows , 2000 .

[3337]  Li-Ming Ruan,et al.  Temperature response in absorbing, isotropic scattering medium caused by laser pulse , 2000 .

[3338]  H. Suehrcke,et al.  On the relationship between duration of sunshine and solar radiation on the earth’s surface: Ångström’s equation revisited , 2000 .

[3339]  Zahari Ibarahim,et al.  A validated model of naturally ventilated PV cladding , 2000 .

[3340]  Shu-San Hsiau,et al.  Effective thermal conductivities of a single species and a binary mixture of granular materials , 2000 .

[3341]  Mohamed Chaker Zaghdoudi,et al.  Study of the behaviour of a bubble in an electric field: steady shape and local fluid motion , 2000 .

[3342]  D. A. Neeper,et al.  Thermal dynamics of wallboard with latent heat storage , 2000 .

[3343]  A. B. Turner,et al.  Fluid flow and heat transfer over straight and curved rough surfaces , 2000 .

[3344]  Jorge Llagostera,et al.  Application of the UNIFAES Discretization Scheme to Mixed Convection in a Porous Layer with a Cavity, Using the Darcy Model , 2000 .

[3345]  Jamil A. Khan,et al.  Numerical Thermal Model of Resistance Spot Welding in Aluminum , 2000 .

[3346]  P. Olson,et al.  Laboratory experiments on high Rayleigh number thermal convection in a rapidly rotating hemispherical shell , 2000 .

[3347]  B. Mo,et al.  Capillary Pumped-Loop Thermal Performance Improvement with Electrohydrodynamic Technique , 2000 .

[3348]  K. A. Yih.  Combined Heat and Mass Transfer in Mixed Convection Adjacent to a VWT/VWC or VHF/VMF Cone in a Porous Medium: The Entire Regime , 2000 .

[3349]  César Treviño,et al.  Graetz Problem for the Conjugated Conduction-Film Condensation Process , 2000 .

[3350]  Alberto Soria,et al.  Effective Conductivity for Porous Media: A Maxwellian Approach , 2000 .

[3351]  Ricardo Romero-Méndez,et al.  Effect of fin spacing on convection in a plate fin and tube heat exchanger , 2000 .

[3352]  Abraham Kribus,et al.  Optical fibers and solar power generation , 2000 .

[3353]  Zhixiong Guo,et al.  Multidimensional Monte Carlo Simulation of Short-Pulse Laser Transport in Scattering Media , 2000 .

[3354]  A. Rapti.  Atmospheric transparency, atmospheric turbidity and climatic parameters , 2000 .

[3355]  Bu-Xuan Wang,et al.  Nonlinear aspects of boiling systems and a new method for predicting the pool nucleate boiling heat transfer , 2000 .

[3356]  D. E. Rosner,et al.  Energy transfer between an aerosol particle and gas at high temperature ratios in the Knudsen transition regime , 2000 .

[3357]  Ming Xiong.  Forced Convection in a Couette Flow in a Composite Duct: An Analysis of Thermal Dispersion and Non-Darcian Effects , 2000 .

[3358]  Moo Hwan Kim,et al.  Heat Transfer Augmentation Characteristics of Various Inserts in a Heat Exchanger Tube , 2000 .

[3359]  A. T. Komov,et al.  Heat transfer in a pipe under asymmetric heating under conditions of forced motion of subcooled liquid , 2000 .

[3360]  Elena Kustova,et al.  Multitemperature kinetic model for heat transfer in reacting gas mixture flows , 2000 .

[3361]  I. Pop,et al.  Free Convection from a Horizontal Surface in a Porous Medium with Newtonian Heating , 2000 .

[3362]  Hans Beer,et al.  Frost deposition in a parallel plate channel under laminar flow conditions , 2000 .

[3363]  Huiying Wu,et al.  Compound Enhanced Heat Transfer Inside Tubes by Combined Use of Spirally Corrugated Tubes and Inlet Axial Vane Swirlers , 2000 .

[3364]  Philip C. Eames,et al.  Linear Dielectric Non-Imaging Concentrating Covers For PV Integrated Building Facades , 2000 .

[3365]  Sidra I. Silton,et al.  Ablation Onset in Unsteady Hypersonic Flow About Nose Tip with Cavity , 2000 .

[3366]  Gerry B. Andeen,et al.  Dropwise Condensation of Steam on Horizontal Corrugated Tubes Using an Organic Self-Assembled Monolayer Coating , 2000 .

[3367]  Ryosuke Matsumoto,et al.  Endwall Heat Transfer Characteristics with a Single Oblique Pin Fin , 2000 .

[3368]  G. F. Sivykh.  Turbulent Transfer Coefficients Model for Flows over Permeable Rough Surfaces , 2000 .

[3369]  S. Riffat,et al.  Daylight performance of lightpipes , 2000 .

[3370]  Reyad El-Khazali,et al.  Heating of a biogas reactor using a solar energy system with temperature control unit , 2000 .

[3371]  Hideo Inaba,et al.  Flow drag and heat transfer reduction of flowing water containing fibrous material in a straight pipe , 2000 .

[3372]  Z. Feng,et al.  A numerical study on the transient heat transfer from a sphere at high Reynolds and Peclet numbers , 2000 .

[3373]  J. E. Fale,et al.  Study of a Drainage Disk Thermosyphon Condenser Design , 2000 .

[3374]  A. Soler,et al.  A study of zenith luminance on Madrid cloudless skies , 2000 .

[3375]  J Breitenbach,et al.  Goniospectrometer measurements of the optical performance of a holographic optical element , 2000 .

[3376]  Michael Epstein,et al.  Transient vertical mixing by natural convection in a wide layer , 2000 .

[3377]  N. E. Wijeysundera,et al.  An irreversible-thermodynamic model for solar-powered absorption cooling systems , 2000 .

[3378]  Yiding Cao,et al.  Structural Optimization of Axially Grooved Flat Miniature Heat Pipes , 2000 .

[3379]  Andreas Genssle,et al.  Analysis of the process characteristics of an absorption heat transformer with compact heat exchangers and the mixture TFE–E181 , 2000 .

[3380]  Reinhard Radermacher,et al.  Evaporatively-cooled Condenser with Rotating Disks , 2000 .

[3381]  M. Kim,et al.  Enhanced Effect of a Horizontal Micro-fin Tube for Condensation Heat Transfer with R22 and R410A , 2000 .

[3382]  Prabhamani R. Patil,et al.  Thermal Instability in an Inclined Isotropic Porous Medium , 2000 .

[3383]  Tasman Graham,et al.  Convective instability in a time-dependent buoyancy driven boundary layer , 2000 .

[3384]  R. Stuhlmann,et al.  Effects of burning of biomass on satellite estimations of solar irradiation in Brazil , 2000 .

[3385]  B. Li,et al.  Effects of Heat Source Arrangements on Marangoni Convection in Electrostatically Levitated Droplets , 2000 .

[3386]  Anil W. Date,et al.  Numerical Prediction of Laminar Flow and Heat Transfer in a Tube with Twisted-tape Insert: Effects of Property Variations and Buoyancy , 2000 .

[3387]  Michael D. Steven,et al.  Spectral Solar Irradiance And Some Optical Properties For Various Polluted Atmospheres , 2000 .

[3388]  Alain J. Kassab,et al.  Coupled Dual Reciprocity Boundary Element/Finite Volume Method for Transient Conjugate Heat Transfer , 2000 .

[3389]  Joakim Karlsson,et al.  Angle-resolved optical characterisation of an electrochromic device , 2000 .

[3390]  Michael M. Ohadi,et al.  Compound Augmentation of Pool Boiling on Three Selected Commercial Tubes , 2000 .

[3391]  Claude Carlier,et al.  Analysis of heat and mass transfer in asymmetric system , 2000 .

[3392]  Ali Akbar Merrikh,et al.  Transient Natural Convection in Differentially Heated Porous Enclosures , 2000 .

[3393]  James H. Leylek,et al.  A Detailed Analysis of Film Cooling Physics: Part III— Streamwise Injection With Shaped Holes , 2000 .

[3394]  Xin-Lin Xia,et al.  Transient Coupled Radiation and Conduction in an Absorbing and Scattering Composite Layer , 2000 .

[3395]  Jurij Avsec,et al.  Calculation of the Speed of Sound and Other Thermophysical Properties , 2000 .

[3396]  Sang Jun Ha,et al.  A dry-spot model of critical heat flux applicable to both pool boiling and subcooled forced convection boiling , 2000 .

[3397]  Louis C. Chow,et al.  Effects of Heater Orientation and Confinement on Liquid Nitrogen Pool Boiling , 2000 .

[3398]  S. Roy,et al.  Forced Convection Heat Transfer to Phase Change Material Slurries in Circular Ducts , 2000 .

[3399]  Yutaka Abe,et al.  Measurement of Velocity and Temperature Distributions in a Highly Porous Medium , 2000 .

[3400]  B. J. Brinkworth,et al.  Estimation of flow and heat transfer for the design of PV cooling ducts , 2000 .

[3401]  J. J. Guilleminot,et al.  Adsorptive solar powered ice maker: experiments and model , 2000 .

[3402]  Morifumi Tashiro,et al.  Heat Transfer Enhancement and Pressure Drop in the Flow Boiling Field with the Bubble Movement Restricted by a Screen Sheet , 2000 .

[3403]  Yong X. Tao,et al.  Evaporative heat transfer from thin liquid film on a heated cylinder , 2000 .

[3404]  Harald Ries,et al.  Optimized secondary concentrators for a partitioned central receiver system , 2000 .

[3405]  Vinayak Eswaran,et al.  Double-Diffusive Convection in Slender Anisotropic Porous Enclosures , 2000 .

[3406]  Thomas C. Harmon,et al.  Nonaqueous Phase Liquid Dissolution in Porous Media: Current State of Knowledge and Research Needs , 2000 .

[3407]  Dae Hee Lee,et al.  A new liquid crystal color calibration technique using neural networks and median filtering , 2000 .

[3408]  B. W. Atkinson,et al.  Atmospheric Response To Spatial Variations In Concentration And Size Of Polynyas In The Southern Ocean Sea-Ice Zone , 2000 .

[3409]  S. Kato,et al.  CFD Analysis of a Thermal Plume and the Indoor Air Flow Using k-ε Models with Buoyancy Effects , 2000 .

[3410]  Gunnar A. Niklasson,et al.  Light Scattering in Pigmented Coatings:: Experiments and Theory , 2000 .

[3411]  Shahab Alizadeh,et al.  Multi-pressure absorption cycles in solar refrigeration: , 2000 .

[3412]  M. Köhl,et al.  Accelerated life testing of solar absorber coatings:: Testing procedure and results , 2000 .

[3413]  Masoud Nikravesh,et al.  Control of nonisothermal CSTR with time varying parameters via dynamic neural network control (DNNC) , 2000 .

[3414]  Aldo Orioli,et al.  On the reliability of ASHRAE conduction transfer function coefficients of walls , 2000 .

[3415]  G. T. Polley,et al.  Derivation of Charts for the Approximate Determination of the Area Requirements of Heat Exchangers Using Plain and Low‐Finned Tube Bundles (Part A) , 2000 .

[3416]  Anastassios M. Stamatelos,et al.  Thermal response of automotive hydrocarbon adsorber systems , 2000 .

[3417]  N. J. van de Braak,et al.  Effect of heating system position on vertical distribution of crop temperature and transpiration in greenhouse tomatoes , 2000 .

[3418]  Marcia K. Politovich,et al.  Predicting Glaze or Rime Ice Growth on Airfoils , 2000 .

[3419]  Kazuaki Sakamoto,et al.  Heat removal characteristics of vault storage system with cross flow for spent fuel , 2000 .

[3420]  Choon Man Lee,et al.  A three-dimensional steady-state finite element analysis of square die extrusion by using automatic mesh generation , 2000 .

[3421]  Peter Twigg,et al.  Statistical process control based fault detection of CHP units , 2000 .

[3422]  Qian Wang,et al.  Studies of a Heat-Pipe Cooled Piston Crown , 2000 .

[3423]  Russian Federation,et al.  Limiting angular dependencies of heat transfer and stratification in a heat-generating fluid , 2000 .

[3424]  S. Kasa,et al.  Influence of intensifying means upon technological characteristic of glass melting furnaces , 2000 .

[3425]  V. I. Lagutin,et al.  Aerodynamic drag reduction by plasma and hot-gas injection , 2000 .

[3426]  Ho-Ming Yeh,et al.  An Analytical Study of Parallel-Plate Heat Exchangers with Insulation Sheet Inserted for Double-Flow Operations , 2000 .

[3427]  Enrong Lu,et al.  Numerical study on natural convection inside the channel between the flat-plate cover and sine-wave absorber of a cross-corrugated solar air heater , 2000 .

[3428]  C. G. Carrington,et al.  Dynamic Modelling of the Wood Stack in a Wood Drying Kiln , 2000 .

[3429]  Chung-Wen Lan,et al.  Three-dimensional simulation of vertical zone-melting crystal growth: symmetry breaking to multiple states , 2000 .

[3430]  Volker Wittwer,et al.  The gasochromic properties of sol–gel WO3 films with sputtered Pt catalyst , 2000 .

[3431]  Chris R. Kleijn,et al.  Symmetry breaking in a stagnation-flow CVD reactor , 2000 .

[3432]  R. Pein,et al.  Treatment of systematic errors in intrusive concentration and temperature measurements , 2000 .

[3433]  F. F. Hill,et al.  Flue gas desulphurization by spray dry absorption , 2000 .

[3434]  Takao Tsukada,et al.  Effect of internal radiative heat transfer on transition of flow modes in CZ oxide melt , 2000 .

[3435]  A. Varela.  Self-Tuning Pressure Control in an Injection Moulding Cavity During Filling , 2000 .

[3436]  Jacques Amouroux,et al.  HEAT TRANSFER FROM OXYGEN ATOMS RECOMBINATION ON SILICON CARBIDE: CHEMICAL EVOLUTION OF THE MATERIAL SURFASE , 2000 .

[3437]  V. V. Rakov,et al.  Anomalous effects in dopant distribution in Ge single crystals grown by the floating zone technique aboard spacecrafts , 2000 .

[3438]  Wenyi Lin,et al.  Two-Fluid Models for Simulating Reacting Gas-Particle Flows, Coal Combustion and NOx Formation , 2000 .

[3439]  M. A. Al-Saleh,et al.  An Experimental Study on Natural Convection from Vertical Surfaces Embedded in Porous Media , 2000 .

[3440]  Gilles Flamant,et al.  Pyrometry applications in thermal plasma processing , 2000 .

[3441]  Anthony B. Murphy,et al.  TREATMENTS OF DIFFUSION IN THERMAL PLASMAS , 2000 .

[3442]  J. Troe,et al.  Classical diffusion model of vibrational predissociation of van der Waals complexes: truncated mean first passage time approximation , 2000 .

[3443]  Ewa Wäckelgård,et al.  Oxidation Kinetics of Nickel Particles: Comparison Between Free Particles and Particles in an Oxide Matrix , 2000 .

[3444]  Samuel M. Sami,et al.  Boiling characteristics of alternatives to R-502 inside air/refrigerant enhanced surface tubing , 2000 .

[3445]  J. I. Ajona,et al.  The use of CPC collectors for detoxification of contaminated water: Design, construction and preliminary results , 2000 .

[3446]  Masahiro Kawakami,et al.  Kinetics of Steel Scrap Melting in Molten Fe-C Bath , 2000 .

[3447]  Kamal Abdel Radi Ismail,et al.  Solidification of pcm inside a spherical capsule , 2000 .

[3448]  Chris R. Kleijn,et al.  On turbulent flows in cold-wall CVD reactors , 2000 .

[3449]  Jean-Yves Bigot,et al.  Electron dynamics in metallic nanoparticles , 2000 .

[3450]  Adrian Bejan,et al.  Thermodynamic optimization of the match between two streams with phase change , 2000 .

[3451]  Atsushi Tsutsumi,et al.  Nonlinear dynamics of gas-solid circulating fluidized-bed system , 2000 .

[3452]  Larry L. Baxter,et al.  Deposition of potassium salts on heat transfer surfaces in straw-fired boilers: a pilot-scale study , 2000 .

[3453]  Andris Azens,et al.  ELECTROCHROMIC DEVICES INCORPORATING Cr OXIDE AND Ni OXIDE FILMS: A COMPARISON , 2000 .

[3454]  M. Q. McQuay,et al.  Numerical modelling of an industrial glass-melting furnace , 2000 .

[3455]  Juming Tang,et al.  A HEATING BLOCK SYSTEM FOR STUDYING THERMAL DEATH KINETICS OF INSECT PESTS , 2000 .

[3456]  Mahendra Mohan.  Estimation of sensible heat flux from radiometric temperature over crop canopy. , 2000 .

[3457]  Xiande Fang,et al.  Numerical simulation and sensitivity analysis of lattice passive solar heating walls , 2000 .

[3458]  Pierre Millet,et al.  Advances in hydride phase growth: Automatic high precision calorimeter- volumetric devices, for thermodynamic and kinetics analyses , 2000 .

[3459]  Yaşar Demirel,et al.  On the effective heat transfer parameters in a packed bed , 2000 .

[3460]  Ernani Sartori,et al.  A critical review on equations employed for the calculation of the evaporation rate from free water surfaces , 2000 .

[3461]  Paul A. Funk,et al.  Evaluating the international standard procedure for testing solar cookers and reporting performance , 2000 .

[3462]  Atul Kumar Singh,et al.  MHD effects on heat and mass transfer in flow of a viscous fluid with induced magnetic field , 2000 .

[3463]  Andreas Timinger,et al.  Performance of a rectangular secondary concentrator with an asymmetric heliostat field , 2000 .

[3464]  Hongwei Xin,et al.  Modeling heat mat operation for piglet creep heating , 2000 .

[3465]  Siegfried Denys,et al.  Modeling Conductive Heat Transfer and Process Uniformity during Batch High‐Pressure Processing of Foods , 2000, Biotechnology progress.

[3466]  D. Y. Yuan,et al.  Morphometry of the canine prostate vasculature. , 2000, Microvascular research.

[3467]  Y Y Chen,et al.  Treatable domain and optimal frequency for brain tumors during ultrasound hyperthermia. , 2000, International journal of radiation oncology, biology, physics.

[3468]  M. Hendrickx,et al.  Modeling Conductive Heat Transfer during High‐Pressure Thawing Processes: Determination of Latent Heat as a Function of Pressure , 2000, Biotechnology progress.

[3469]  J. Sozanski,et al.  New 434 MHz interstitial hyperthermia system monitored by microwave radiometry: theoretical and experimental results. , 2000, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

[3470]  C D Deakin,et al.  Effects of changes in packed cell volume on the specific heat capacity of blood: implications for studies measuring heat exchange in extracorporeal circuits. , 2000, British journal of anaesthesia.

[3471]  J. B. Park,et al.  Defining the heating characteristics of ferromagnetic implants using calorimetry. , 2000, Journal of biomedical materials research.

[3472]  B. S. Tanenbaum,et al.  Optimal cryogen spray cooling parameters for pulsed laser treatment of port wine stains , 2000, Lasers in surgery and medicine.

[3473]  V I Passechnik,et al.  Fundamentals and prospects of passive thermoacoustic tomography. , 2000, Critical reviews in biomedical engineering.

[3474]  Deborah S. Cobb,et al.  In vitro temperature change at the dentin/pulpal interface by using conventional visible light versus argon laser , 2000, Lasers in surgery and medicine.

[3475]  Adrian Bejan,et al.  Power extraction from a hot stream in the presence of phase change , 2000 .

[3476]  Franck Nicoud,et al.  A velocity transformation for heat and mass transfer , 2000 .

[3477]  David D. Marshall,et al.  Supersonic Channel Airfoils for Reduced Drag , 2000 .

[3478]  Ernest W. Tollner,et al.  Apparent thermal conductivity of mulch materials exposed to forced convection , 2000 .

[3479]  E. Bonifaz,et al.  Finite element analysis of heat flow in single-pass arc welds , 2000 .

[3480]  L. H. Hansen,et al.  Modelling the heat dynamics of a building using stochastic differential equations , 2000 .

[3481]  L. Wald,et al.  On the clear sky model of the ESRA — European Solar Radiation Atlas — with respect to the heliosat method , 2000 .

[3482]  Yacov Tsur,et al.  Long-term perspective on the development of solar energy , 2000 .

[3483]  Suad Jakirlić,et al.  DNS, EXPERIMENTAL AND MODELLING STUDY OF AXIALLY COMPRESSED IN-CYLINDER SWIRLING FLOW , 2000, Proceeding of First Symposium on Turbulence and Shear Flow Phenomena.

[3484]  Frank G. Jacobitz,et al.  SCALAR TRANSPORT AND MIXING IN TURBULENT STRATIFIED SHEAR FLOW , 2000, Proceeding of First Symposium on Turbulence and Shear Flow Phenomena.

[3485]  Shin-ichi Satake,et al.  DIRECT NUMERICAL SIMULATION ON LAMINARIZATION OF TURBULENT FORCED GAS FLOWS IN CIRCULAR TUBES WITH STRONG HEATING , 2000, Proceeding of First Symposium on Turbulence and Shear Flow Phenomena.

[3486]  Yasuo Hattori,et al.  CHARACTERISTICS OF TURBULENT COMBINED-CONVECTION BOUNDARY LAYER ALONG A VERTICAL HEATED PLATE , 2000, Proceeding of First Symposium on Turbulence and Shear Flow Phenomena.

[3487]  Paolo Orlandi,et al.  TURBULENT BUDGETS IN ROTATING PIPES BY DNS , 2000, Proceeding of First Symposium on Turbulence and Shear Flow Phenomena.

[3488]  Ned Djilali,et al.  LARGE EDDY SIMULATION OF THE INFLUENCE OF HIGH FREE-STREAM TURBULENCE ON SPATIALLY EVOLVING BOUNDARY LAYER , 2000, Proceeding of First Symposium on Turbulence and Shear Flow Phenomena.

[3489]  Rainer Friedrich,et al.  Influence of curvature and torsion on turbulent flow in helically coiled pipes , 2000 .

[3490]  I. A. Hassanien,et al.  Influence of Variable Permeability on Combined Convection Along a Nonisothermal Wedge in a Saturated Porous Medium , 2000 .

[3491]  Céline Morin,et al.  Droplet vaporisation characteristics of vegetable oil derived biofuels , 2000 .

[3492]  Stan Schoofs,et al.  The formation and evolution of layered structures in porous media: effects of porosity and mechanical dispersion , 2000 .

[3493]  Alain J. Kassab,et al.  Retrieval of Multidimensional Heat Transfer Coefficient Distributions Using an Inverse BEM-Based Regularized Algorithm: Numerical and Experimental Results , 1999, Heat Transfer: Volume 1.

[3494]  Keith E. Herold,et al.  Theory of Heat/Mass Transfer Additives in Absorption Chillers , 1999, Advanced Energy Systems.

[3495]  William A. Sirignano,et al.  Collision of a vortex with a vaporizing droplet , 1999 .

[3496]  Giovanni Tanda,et al.  Experimental heat transfer from a vertical plate within a naturally ventilated cabinet , 1999 .

[3497]  Cheng-Hung Huang,et al.  A three-dimensional inverse heat conduction problem in estimating surface heat flux by conjugate gradient method , 1999 .

[3498]  Hamid Hadim,et al.  Forced convection in a sintered porous channel with inlet and outlet slots , 1999 .

[3499]  J. J. Fuller,et al.  Thermal Contact Conductance of Metal/Polymer Joints , 1999 .

[3500]  W. J. Bowman,et al.  Efficiency of a constant area, adiabatic TIP, heat-pipe FIN , 1999 .

[3501]  Joon Sik Lee,et al.  Effects of Orientation Angles on Film Cooling Over a Flat Plate: Boundary Layer Temperature Distributions and Adiabatic Film Cooling Effectiveness , 1999 .

[3502]  A. Bölcs,et al.  Experimental study of showerhead cooling on a cylinder comparing several configurations using cylindrical and shaped holes , 2000 .

[3503]  Michael E. Crawford,et al.  Prediction of Transitional Heat Transfer Characteristics of Wake-Affected Boundary Layers , 1999 .

[3504]  Sasa Kenjeres,et al.  Transient analysis of Rayleigh–Bénard convection with a RANS model , 1999 .

[3505]  Yoshihiro Kikuchi,et al.  Effect of Pulsating Strouhal Number on Heat Transfer around a Heated Cylinder in Pulsating Cross-Flow , 1999 .

[3506]  Rob A. M. Wolters,et al.  Wafer temperature measurement in PVD systems using the Co-Si reaction , 1999 .

[3507]  Mark A. Kedzierski,et al.  The Effect of a Boiling Additive on R123 Condensation on a Vertical Integral-Fin Surface , 1999 .

[3508]  M. W. Wambsganss,et al.  Two-phase pressure drop of refrigerants during flow boiling in small channels : an experimental investigation and correlation development. , 1999 .

[3509]  Jose A. Camberos,et al.  Nonlinear Time-Step Constraints Based on the Second Law of Thermodynamics , 1999 .

[3510]  Yen-Sen Chen,et al.  Development of an unstructured radiation model applicable for two-dimensional planar, axisymmetric, and three-dimensional geometries , 1999 .

[3511]  R. Naumann.  An analytical model for transport from quasi-steady and periodic accelerations on spacecraft , 1999 .

[3512]  Eswar Josyula,et al.  Computational study of vibrationally relaxing gas past blunt body in hypersonic flows , 1999 .

[3513]  Keisuke Sawada,et al.  Calculation of surface heat transfer for a sphere with wall injection , 1999 .

[3514]  Robert S. Hiers,et al.  Critical behavior in small particle combustion , 1999 .

[3515]  Karen A. Thole,et al.  Effect of Inlet Conditions on Endwall Secondary Flows , 1999 .

[3516]  T. Paul,et al.  Natural convection in a non-rectangular porous enclosure , 1999 .

[3517]  Tim Craft,et al.  Progress in the Use of Non-Linear Two-Equation Models in the Computation of Convective Heat-Transfer in Impinging and Separated Flows , 1999 .

[3518]  D. Stevens,et al.  Importance of Heat Transfer by Radiation in Li ‐ Ion Batteries during Thermal Abuse , 1999 .

[3519]  Hk Hendrik Kuiken,et al.  Mass transport in a partially covered fluid-filled cavity , 2000 .

[3520]  Vijay K. Garg,et al.  Heat Transfer on a Film-Cooled Rotating Blade , 1999 .

[3521]  Alfonso Ortega,et al.  A Numerical Investigation of the Convective Heat Transfer in Unsteady Laminar Flow Past a Single and Tandem Pair of Square Cylinders in a Channel , 1998, Heat Transfer: Volume 1 — Heat Transfer in Flowing Systems.

[3522]  Dimos Poulikakos,et al.  Pressure and power generation during explosive vaporization on a thin-film microheater , 2000 .

[3523]  Mark A. Kedzierski,et al.  Enhancement of R123 Pool Boiling by the Addition of Hydrocarbons | NIST , 1998 .

[3524]  T. Rao,et al.  Analysis of an annular finned pyrolyser-II , 1998 .

[3525]  Fred A. Rigby,et al.  Temperature-Dependent Reflectance of Plated Metals and Composite Materials Under Laser Irradiation , 1998 .

[3526]  A. Kolesnikov,et al.  Study of quartz surface catalycity in dissociated carbon dioxide subsonic flows , 1998 .

[3527]  A. Emery,et al.  Optimal experiment design , 1998 .

[3528]  T. Nguyen,et al.  Advanced cooling system using miniature heat pipes in mobile PC , 1998, ITherm'98. Sixth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.98CH36208).

[3529]  Yogendra Joshi,et al.  Natural convection air cooling of electronic components in partially open compact horizontal enclosures , 1998, ITherm'98. Sixth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.98CH36208).

[3530]  W. I. Johnson,et al.  Combined effects of sub-cooling and operating pressure on the performance of a two-chamber thermosyphon , 1998, ITherm'98. Sixth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.98CH36208).

[3531]  R.M.M. Mattheij,et al.  Numerical analysis of turbine blade cooling ducts , 1998 .

[3532]  P. Sokolov,et al.  Computational heat transfer modeling of thermal energy storage canisters , 1997 .

[3533]  Mahmood Yaghoubi,et al.  A numerical study of convective heat transfer from an array of parallel blunt plates , 1997 .

[3534]  S. Baek,et al.  Numerical Analysis of Ignition Transient in an Axisymmetric Solid Rocket Motor Equipped with Rear Ignition System , 1997 .

[3535]  D. Gulley,et al.  Troubleshooting shell-and-tube heat exchangers , 1996 .

[3536]  B. Yimer.  Multi-dimensional solidification with internal radiation and temperature dependent properties , 1996 .

[3537]  B. Zinn,et al.  Experimental Investigation of the Evaporation of Droplets in Axial Acoustic Fields , 1995 .

[3538]  S. Ha,et al.  Some aspects of experimental in-tube evaporation , 2000 .

[3539]  M. K. Chyu,et al.  Combined effects of rotation and skew angle on the convective heat transfer in a two-pass passage with a 180-degree turn , 1993 .

[3540]  M. S. Abel,et al.  Visco-elastic boundary layer flow past a stretching plate with suction and heat transfer , 1986 .

[3541]  Milton S. Plesset,et al.  Viscous Effects in Rayleigh-Taylor Instability. , 1974 .