Extended finite element modeling of production from a reservoir embedded with an arbitrary fracture network

Summary A numerical scheme based on the eXtended Finite Element Method (XFEM) is proposed to simulate complex fluid flow in a fractured porous reservoir. By enriching the elements fully cut by the fracture and the near-tip region, the flow mechanism including the tip flux singularity can be exactly represented in the XFEM formulation. Fluid transfer between the matrix and the fractures can be easily coupled; and XFEM also overcomes the sensitivity to the mesh used in the traditional unstructured discretizations, regardless of the complexity of the fracture network. The method is validated for a simple case by the exact analytical solution. Results are compared between XFEM and FEM. Cases studies are presented to illustrate the power, efficiency, accuracy and flexibility of the proposed method for simulating transient productive flow in reservoirs with complex fracture networks.

[1]  James A. Liggett,et al.  Singularities in Darcy Flow Through Porous Media , 1980 .

[2]  Louis J. Durlofsky,et al.  An Efficient Discrete Fracture Model Applicable for General Purpose Reservoir Simulators , 2003 .

[3]  T. Belytschko,et al.  An Extended Finite Element Method for Two-Phase Fluids , 2003 .

[4]  R. Helmig,et al.  A mixed-dimensional finite volume method for two-phase flow in fractured porous media , 2006 .

[5]  Abbas Firoozabadi,et al.  Numerical Simulation of Water Injection in 2D Fractured Media Using Discrete-Fracture Model , 2001 .

[6]  L. HeberCinco,et al.  Transient Pressure Behavior for a Well With a Finite-Conductivity Vertical Fracture , 1978 .

[7]  Thomas-Peter Fries,et al.  The stable XFEM for two-phase flows , 2013 .

[8]  Yan Jin,et al.  Analytical solution and mechanisms of fluid production from hydraulically fractured wells with finite fracture conductivity , 2015 .

[9]  Yan Jin,et al.  Pressure-gradient singularity and production enhancement for hydraulically fractured wells , 2013 .

[10]  Arash Zamani,et al.  Implementation of the extended finite element method for dynamic thermoelastic fracture initiation , 2010 .

[11]  Marc Duflot,et al.  The extended finite element method in thermoelastic fracture mechanics , 2008 .

[12]  M. V. Genuchten,et al.  A dual-porosity model for simulating the preferential movement of water and solutes in structured porous media , 1993 .

[13]  I. Babuska,et al.  The partition of unity finite element method: Basic theory and applications , 1996 .

[14]  Thomas-Peter Fries,et al.  The intrinsic XFEM for two‐fluid flows , 2009 .

[15]  Wolfgang A. Wall,et al.  An XFEM‐based embedding mesh technique for incompressible viscous flows , 2011 .

[16]  Ted Belytschko,et al.  XFEM modeling of ultrasonic wave propagation in polymer matrix particulate/fibrous composites , 2013 .

[17]  Yan Jin,et al.  An asymptotic solution for fluid production from an elliptical hydraulic fracture at early-times , 2015 .

[18]  Ted Belytschko,et al.  On a new extended finite element method for dislocations: Core enrichment and nonlinear formulation , 2008 .

[19]  Xiaopeng Xu,et al.  Numerical simulations of fast crack growth in brittle solids , 1994 .

[20]  Ted Belytschko,et al.  Arbitrary discontinuities in finite elements , 2001 .

[21]  Ted Belytschko,et al.  A finite element method for crack growth without remeshing , 1999 .

[22]  Jean-François Remacle,et al.  A computational approach to handle complex microstructure geometries , 2003 .

[23]  Ted Belytschko,et al.  Elastic crack growth in finite elements with minimal remeshing , 1999 .

[24]  Martin J. Blunt,et al.  Multirate-Transfer Dual-Porosity Modeling of Gravity Drainage and Imbibition , 2007 .

[25]  Thomas-Peter Fries,et al.  The extended finite element method for two-phase and free-surface flows: A systematic study , 2011, J. Comput. Phys..

[26]  L. Durlofsky,et al.  Upscaling Discrete Fracture Characterizations to Dual-Porosity, Dual-Permeability Models for Efficient Simulation of Flow With Strong Gravitational Effects , 2008 .

[27]  Ted Belytschko,et al.  An extended finite element method for dislocations in complex geometries: Thin films and nanotubes , 2009 .

[28]  R. Arnett,et al.  Modelling fluid flow in fractured‐porous rock masses by finite‐element techniques , 1984 .

[29]  Dandan Xu,et al.  Modeling of dynamic crack branching by enhanced extended finite element method , 2014, Computational Mechanics.

[30]  Ted Belytschko,et al.  Concurrently coupled atomistic and XFEM models for dislocations and cracks , 2009 .

[31]  J. Noorishad,et al.  An upstream finite element method for solution of transient transport equation in fractured porous media , 1982 .