Spectral analysis of ground penetrating radar signals in concrete, metallic and plastic targets

Abstract The accuracy of detecting buried targets using ground penetrating radar (GPR) depends mainly on features that are extracted from the data. The objective of this study is to test three spectral features and evaluate the quality to provide a good discrimination among three types of materials (concrete, metallic and plastic) using the 200 MHz GPR system. The spectral features which were selected to check the interaction of the electromagnetic wave with the type of material are: the power spectral density (PSD), short-time Fourier transform (STFT) and the Wigner–Ville distribution (WVD). The analyses were performed with simulated data varying the sizes of the targets and the electrical properties (relative dielectric permittivity and electrical conductivity) of the soil. To check if the simulated data are in accordance with the real data, the same approach was applied on the data obtained in the IAG/USP test site. A noticeable difference was found in the amplitude of the studies' features in the frequency domain and these results show the strength of the signal processing to try to differentiate buried materials using GPR, and so can be used in urban planning and geotechnical studies.

[1]  Herbert Wiggenhauser,et al.  A Study of Concrete Hydration and Dielectric Relaxation Mechanism Using Ground Penetrating Radar and Short-Time Fourier Transform , 2010, EURASIP J. Adv. Signal Process..

[2]  Vagner Roberto Elis,et al.  Investigações geofísicas de superfície e de poço no sítio controlado de geofísica rasa do IAG-USP , 2004 .

[3]  Jorge Luís Porsani,et al.  Utilização do GPR para caracterizar tambores plásticos enterrados no sítio controlado de geofísica rasa do IAG/USP , 2006 .

[4]  Prabhakar Rao Chitrapu,et al.  On the Wigner Ville distribution of finite duration signals , 1991, Signal Process..

[5]  Khaled H. Hamed,et al.  Time-frequency analysis , 2003 .

[6]  Mario Di Paola,et al.  A new representation of power spectral density and correlation function by means of fractional spectral moments , 2010 .

[7]  D. Okaya,et al.  Frequency‐time decomposition of seismic data using wavelet‐based methods , 1995 .

[8]  Jorge Luís Porsani,et al.  O sítio controlado de geofísica rasa do IAG/USP: instalação e resultados GPR 2D-3D , 2006 .

[9]  P. van Genderen,et al.  Imaging of stepped frequency continuous wave GPR data using the Yule-Walker parametric method , 2005, European Radar Conference, 2005. EURAD 2005..

[10]  K. Yee.  Numerical solution of initial boundary value problems involving maxwell's equations in isotropic media , 1966 .

[11]  Tianyou Liu,et al.  Spectral decomposition of seismic data with reassigned smoothed pseudo Wigner–Ville distribution , 2009 .

[12]  Jorge Luís Porsani,et al.  Comparing performance of instrumental drift correction by linear and quadratic adjusting in inductive electromagnetic data , 2011 .

[13]  Saso Tomazic,et al.  On short-time Fourier transform with single-sided exponential window , 1996, Signal Process..

[14]  Evert Slob,et al.  Comparing detection and location performance of perpendicular and parallel broadside GPR antenna orientations , 2010 .

[15]  William A. Sauck,et al.  Ground-penetrating radar profiles over multiple steel tanks: Artifact removal through effective data processing , 2007 .

[16]  F. J. Owens,et al.  A short-time Fourier transform , 1988 .

[17]  P. Welch.  The use of fast Fourier transform for the estimation of power spectra: A method based on time averaging over short, modified periodograms , 1967 .

[18]  J.B. Allen,et al.  A unified approach to short-time Fourier analysis and synthesis , 1977, Proceedings of the IEEE.

[19]  Jin Jiang,et al.  Time-frequency feature representation using energy concentration: An overview of recent advances , 2009, Digit. Signal Process..

[20]  B. Macq,et al.  Time-frequency domain signature analysis of GPR data for landmine identification , 2007, 2007 4th International Workshop on, Advanced Ground Penetrating Radar.