A generalized control design approach for a repetitive controller on current harmonics

This paper proposes a generalized design procedure for repetitive current controllers to obtain good disturbance rejection properties and well behaved and robust system dynamics. Based on an accurate discrete time model different implementation options for repetitive controllers are discussed leading to an intuitive control structure, which allows a simple control design. It will be shown that any desirable dynamics can be achieved by adjusting one parameter only. Even dead beat design is theoretical possible. The impact of model inaccuracies and numerical errors on the dynamics and stability of the system will be investigated. Based on the analysis methods are reviewed to handle these challenges. Simulations and experiments verify the proposed control structure and design concept.

[1]  Masayoshi Tomizuka,et al.  Plug in repetitive control for industrial robotic manipulators , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[2]  Rik W. De Doncker,et al.  Discrete time modeling, implementation and design of current controllers , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[3]  Dong Chen,et al.  An Improved Repetitive Control Scheme for Grid-Connected Inverter With Frequency-Adaptive Capability , 2013, IEEE Transactions on Industrial Electronics.

[4]  Jianfeng Liu,et al.  Low-THD, Fast-Transient, and Cost-Effective Synchronous-Frame Repetitive Controller for Three-Phase UPS Inverters , 2012, IEEE Transactions on Power Electronics.

[5]  Wei Liu,et al.  A fixed-frequency quasi sliding-mode repetitive control (QSMRC) for voltage source inverters , 2013, 2013 1st International Future Energy Electronics Conference (IFEEC).

[6]  Gerardo Escobar,et al.  Implementation of a $6n \pm 1$ Repetitive Controller Subject to Fractional Delays , 2015, IEEE Transactions on Industrial Electronics.

[7]  Paolo Mattavelli,et al.  Repetitive-based control for selective harmonic compensation in active power filters , 2004, IEEE Transactions on Industrial Electronics.

[8]  Danwei Wang,et al.  A three-step design method for performance improvement of robust repetitive control , 2005, Proceedings of the 2005, American Control Conference, 2005..

[9]  Muneaki Ishida,et al.  Suppression of harmonic current for IPMSM using generalized repetitive control , 2010 .

[10]  Dong Chen,et al.  Research on fast transient and 6n±1 harmonics compensating repetitive control scheme for three-phase systems , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[11]  Min Li,et al.  Comparison of two repetitive control strategies of UPS inverter on saber , 2011, Proceedings of 2011 6th International Forum on Strategic Technology.

[12]  Ramon Costa Castelló,et al.  Odd-Harmonic Digital Repetitive Control of a Single-Phase Current Active Filter , 2004 .

[13]  Min Wu,et al.  Aperiodic Disturbance Rejection in Repetitive-Control Systems , 2014, IEEE Transactions on Control Systems Technology.

[14]  Chi-Ying Lin,et al.  Repetitive Model Predictive Control Based on a Recurrent Neural Network , 2012, 2012 International Symposium on Computer, Consumer and Control.

[15]  S. K. Panda,et al.  Design of a Plug-In Repetitive Control Scheme for Eliminating Supply-Side Current Harmonics of Three-Phase PWM Boost Rectifiers Under Generalized Supply Voltage Conditions , 2010, IEEE Transactions on Power Electronics.

[16]  Jonatan Roberto Fischer,et al.  Repetitive Control With Adaptive Sampling Frequency for Wind Power Generation Systems , 2014, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[17]  R. Merry,et al.  Repetitive control applied to a walking piezo actuator , 2009, 2009 IEEE International Conference on Control and Automation.