Modification of sulfonated poly(arylene ether nitrile) proton exchange membranes by poly(ethylene-co-vinyl alcohol)

The modification of the physicochemical properties of sulfonated poly(arylene ether nitrile) (SPAEN) proton exchange membranes was demonstrated by poly(ethylene-co-vinyl alcohol) (EVOH) doping (named SPAEN-x%). By controlling the temperature during membrane preparation, the side reactions of the sulfonic acid groups to form sulfonic acid esters were effectively prevented, greatly reducing the proton conductivity of the membranes. Due to the flexible chain of EVOH, SPAEN-8% showed a relatively high elongation of 30.2%, which enhanced the aromatic polymers' flexibility. The SPAEN-2% membrane exhibited proton conductivity of 166, 55, and 9.6 mS cm−1 at 95%, 70%, and 50% relative humidity, respectively, higher than those of the other SPAEN-x% membranes and even comparable to that of Nafion 212. The water uptake, morphological study, and through-plane proton conductivity of the membranes were studied and discussed. The results suggest that EVOH doping can be used as an effective strategy to improve SPAEN-based proton exchange membranes' performance.

[1]  R. Wycisk,et al.  Electrospun Composite Proton-Exchange and Anion-Exchange Membranes for Fuel Cells , 2021, Energies.

[2]  Yi‐hong Ding,et al.  High flexible ether-free semi-crystalline fuel cell membranes: Molecular-level design, assembly structure and properties , 2021 .

[3]  Lei Jiang,et al.  Tailoring Poly(ether sulfone) Bipolar Membrane for Osmotic Energy Generator with High Power Density. , 2020, Angewandte Chemie.

[4]  M. Abdollahi,et al.  An efficient method for straightforward phosphorylation of ethylene/vinyl alcohol copolymers using trialkyl phosphite/iodine , 2019, Polymer.

[5]  Lianjun Wang,et al.  Multi-block sulfonated poly(arylene ether nitrile) polymers bearing oligomeric benzotriazole pendants with exceptionally high H2/O2 fuel cell performance , 2018, Journal of Membrane Science.

[6]  Xiaobo Liu,et al.  Rational design of sulfonated poly(ether ether ketone) grafted graphene oxide-based composites for proton exchange membranes with enhanced performance , 2018 .

[7]  Lianjun Wang,et al.  Multiblock poly(Phenylene ether nitrile)s with pendant sulfoalkoxyl side chain for H2/air fuel cells at low humidity condition , 2017 .

[8]  Liang Ge,et al.  Ion exchange membranes: New developments and applications , 2017 .

[9]  Junqi Sun,et al.  Highly Transparent and Water-Enabled Healable Antifogging and Frost-Resisting Films Based on Poly(vinyl alcohol)–Nafion Complexes , 2016 .

[10]  K. Miyatake,et al.  Simple, Effective Molecular Strategy for the Design of Fuel Cell Membranes: Combination of Perfluoroalkyl and Sulfonated Phenylene Groups , 2016 .

[11]  H. Na,et al.  Novel humidity sensitive materials derived from naphthalene-based poly (arylene ether ketone) containing sulfobutyl pendant groups , 2016 .

[12]  Jinhui Pang,et al.  Fluorinated poly(arylene ether ketone) containing pendent hexasulfophenyl for proton exchange membrane , 2015 .

[13]  S. Cao,et al.  Enhancement of proton conductivity of chitosan membrane enabled by sulfonated graphene oxide under both hydrated and anhydrous conditions , 2014 .

[14]  K. Kruczała,et al.  Development of stabilized protonconducting membrane based on poly(ethylene-co-vinyl alcohol) , 2014 .

[15]  Gaohong He,et al.  Modification of hydrophilic channels in Nafion membranes by DMBA: Mechanism and effects on proton conductivity , 2014 .

[16]  Robert B. Moore,et al.  Sulfonated Poly(arylene sulfide sulfone nitrile) Multiblock Copolymers with Ordered Morphology for Proton Exchange Membranes , 2013 .

[17]  Dong Won Shin,et al.  Proton-conducting membranes from poly(ether sulfone)s grafted with sulfoalkylamine , 2013 .

[18]  Hongwei Zhang,et al.  Advances in the high performance polymer electrolyte membranes for fuel cells. , 2012, Chemical Society reviews.

[19]  M. Guiver,et al.  Sulfonated hydrocarbon membranes for medium-temperature and low-humidity proton exchange membrane fuel cells (PEMFCs) , 2011 .

[20]  K. Miyatake,et al.  Fluorene-containing cardo polymers as ion conductive membranes for fuel cells , 2011 .

[21]  Ram Devanathan,et al.  Recent developments in proton exchange membranes for fuel cells , 2008 .

[22]  J. Mcgrath,et al.  Hydrophilic–hydrophobic multiblock copolymers based on poly(arylene ether sulfone) via low-temperature coupling reactions for proton exchange membrane fuel cells , 2008 .

[23]  Xianfeng Li,et al.  Block sulfonated poly(ether ether ketone)s (SPEEK) ionomers with high ion-exchange capacities for proton exchange membranes , 2006 .

[24]  Yudong Huang,et al.  Study of EVOH based single ion polymer electrolyte: Composition and microstructure effects on the proton conductivity , 2006 .

[25]  Patric Jannasch,et al.  Proton conducting polysulfone ionomers carrying sulfoaryloxybenzoyl side chains , 2005 .

[26]  C. Lamy,et al.  Sulfonated derivatives of polyparaphenylene as proton conducting membranes for direct methanol fuel cell application , 2004 .

[27]  G. Robertson,et al.  Synthesis of Poly(arylene ether ether ketone ketone) Copolymers Containing Pendant Sulfonic Acid Groups Bonded to Naphthalene as Proton Exchange Membrane Materials , 2004 .

[28]  S. Matsuo,et al.  Synthesis and properties of new crystalline poly(arylene ether nitriles) , 1993 .