Increasing the production rate of a just-in-time production system with variable operation times

Abstract This paper examines a just-in-time (JIT) system with kanbans with three subassembly lines feeding a final assembly station. Variability in operation times exists and variability effects are reduced by increasing work in process levels or by unbalancing the subassembly lines through assignment of work content at each station. Of the several unbalancing methods that were analysed in this study, only the high-medium-low showed a consistent improvement in the output rate of the JIT production system. The output rates with unbalanced stations were always superior to the output rate of the perfectly balanced configurations used as controls. The extent of improvement over the output rate of balanced systems increased directly with the variability in operation times in final assembly and subassembly stations and inversely with the interstage buffer capacity allowed in the system.

[1]  C. A. Carnall,et al.  The location of variable work stations and the performance of production flow lines , 1976 .

[2]  James F. Cox,et al.  An examination of just-in-time management for the small manufacturer: with an illustration , 1986 .

[3]  Y. Sugimori,et al.  Toyota production system and Kanban system Materialization of just-in-time and respect-for-human system , 1977 .

[4]  John A. Buzacott,et al.  The Effect of Station Breakdowns and Random Processing Times on the Capacity of Flow Lines with In-Process Storage , 1972 .

[5]  Michael J. Magazine,et al.  Heuristics for determining output and work allocations in series flow lines , 1978 .

[6]  R. P. Sadowski,et al.  The effect of variability on the unbalanced production line , 1979 .

[7]  Nori Prakasa Rao,et al.  A generalization of the ‘bowl phenomenon’ in series production systems , 1976 .

[8]  Loren Paul Rees,et al.  A SIMULATION ANALYSIS OF THE JAPANESE JUST‐IN‐TIME TECHNIQUE (WITH KANBANS) FOR A MULTILINE, MULTISTAGE PRODUCTION SYSTEM , 1983 .

[9]  Richard J. Schonberger.  Applications of Single-Card and Dual-Card Kanban , 1983 .

[10]  J. Buzacott.  PREDICTION OF THE EFFICIENCY OF PRODUCTION SYSTEMS WITHOUT INTERNAL STORAGE , 1967 .

[11]  L. E. Davis,et al.  PACING EFFECTS ON MANNED ASSEMBLY LINES , 1965 .

[12]  Jeff Cox,et al.  The goal : excellence in manufacturing , 1984 .

[13]  T. E. El-Rayah,et al.  The efficiency of balanced and unbalanced production lines , 1979 .

[14]  Ray Wild,et al.  A note on the operating characteristics of‘ balanced’ and ‘ unbalanced’ production flow lines , 1972 .

[15]  T. E. El-Rayah,et al.  The effect of inequality of interstage buffer capacities and operation time variability on the efficiency of production line systems , 1979 .

[16]  J. M. Hatcher,et al.  The Effect of Internal Storage on the Production Rate of a Series of Stages Having Exponential Service Times , 1969 .