Fabrication method and characterization of electrodeposited and heat-treated iridium oxide films for pH sensing

Abstract A newly developed pH electrode that is formed on a glass substrate is demonstrated. Its fabrication involves the electrodeposition of iridium oxide (IrOx) onto a Au thin-film at a constant current of 0.01 mA, followed by sequential electrode heat treatment at 400 °C. The prepared electrode exhibited a near-Nernstian pH response of 59.5 (±1) mV/pH, comparable to the theoretical sensitivity (59 mV/pH); this characteristic is highly desirable as it allows for the electrode predictable in measuring potentials when considering that IrOx electrodes prepared by a hydrated method are known to exhibit a super-Nernstian pH response (from 59 to 80 mV/pH). Electrodeposition of IrOx produces a porous structure on the electrode surface, while IrOx film thickness is decreased by heat treatment; these processes may also affect the oxidation state of IrOx films. Cathodic charge storage capacities (CSC C ) were measured by cyclic voltammetry as 72 and 48 mC/cm 2 for the non-heat-treated and heat-treated IrOx electrodes, respectively, corresponding to a CSC C value almost equivalent to the iridium amount, which is related to IrOx film thicknesses. Open-circuit potentials were measured to evaluate performances related to pH sensitivity, response time, and reversibility in the pH range of 2.38–11.61. Furthermore, individual electrodes prepared by the same fabrication process showed consistency in terms of sensitivity, with correlation coefficients over 0.999.

[1]  Allen J. Bard,et al.  Electrochemical Methods: Fundamentals and Applications , 1980 .

[2]  Thomas Kappes,et al.  Coulometric micro-titrator with a ruthenium dioxide pH-electrode , 2000 .

[3]  Wipf,et al.  Microscopic measurement of pH with iridium oxide microelectrodes , 2000, Analytical chemistry.

[4]  C. Low,et al.  Electrodeposition of composite coatings containing nanoparticles in a metal deposit , 2006 .

[5]  L. Burke,et al.  A voltammetric investigation of the charge storage reactions of hydrous iridium oxide layers , 1984 .

[6]  Helmuth Galster,et al.  pH Measurement: Fundamentals, Methods, Applications, Instrumentation , 1991 .

[7]  S.F. Cogan,et al.  Electrodeposited iridium oxide for neural stimulation and recording electrodes , 2001, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[8]  John Atkinson,et al.  Planar thick-film pH electrodes based on ruthenium dioxide hydrate , 1998 .

[9]  Hiroki Yamamoto,et al.  Response of an Iridium Oxide pH-Sensor in Nonaqueous Solutions. Comparison with Other pH-Sensors , 1996 .

[10]  Wouter Olthuis,et al.  pH sensor properties of electrochemically grown iridium oxide , 1990 .

[11]  Michael J. Tarlov,et al.  Sputtered thin-film pH electrodes of platinum, palladium, ruthenium, and iridium oxides , 1995 .

[12]  Mu Chiao,et al.  A flexible pH sensor based on the iridium oxide sensing film , 2011 .

[13]  G. Gerlach,et al.  Chemical and pH sensors based on the swelling behavior of hydrogels , 2005 .

[14]  J. Chou,et al.  Electrochromic Property of Sol-Gel Derived TiO 2 Thin Film for pH Sensor , 2011 .

[15]  Marcin Majda,et al.  Effects of Electrodeposition Conditions and Protocol on the Properties of Iridium Oxide pH Sensor Electrodes , 2009 .

[16]  Kenji Arai,et al.  Electrochromic IrOx Thin Films Formed in Sulfatoiridate (III, IV) Complex Solution by Periodic Reverse Current Electrolysis (PRIROF) , 1987 .

[17]  H. Thirsk,et al.  EMF measurements of cells employing metal—metal oxide electrodes in aqueous chloride and sulphate electrolytes at temperatures between 25–250°C☆ , 1976 .

[18]  Tai-Ping Sun,et al.  Study on the sensing characteristics and hysteresis effect of the tin oxide pH electrode , 2005 .

[19]  J. Zemel,et al.  pH-sensitive sputtered iridium oxide films , 1981 .

[20]  Yuliang Cao,et al.  Anodically electrodeposited iridium oxide films microelectrodes for neural microstimulation and recording , 2009 .

[21]  Marc Madou,et al.  A pH Electrode Based on Melt-Oxidized Iridium Oxide , 2001 .

[22]  P. Bergveld,et al.  ISFET based enzyme sensors. , 1987, Biosensors.

[23]  Tian C Zhang,et al.  Fabrication of anodically electrodeposited iridium oxide film pH microelectrodes for microenvironmental studies. , 2002, Analytical chemistry.

[24]  S. Yao,et al.  Carbonate-Melt Oxidized Iridium Wire for pH Sensing , 2003 .

[25]  M. Hitchman,et al.  Potentiometric determination of proton activities in solutions containing hydrofluoric acid using thermally oxidized iridium electrodes , 1991 .

[26]  W. Cascio,et al.  Electrodeposited iridium oxide pH electrode for measurement of extracellular myocardial acidosis during acute ischemia. , 1998, Analytical chemistry.

[27]  K. Yamanaka.  Anodically Electrodeposited Iridium Oxide Films (AEIROF) from Alkaline Solutions for Electrochromic Display Devices , 1989 .

[28]  Jung-Chuan Chou,et al.  Preparation and characteristics of ruthenium dioxide for pH array sensors with real-time measurement system , 2008 .

[29]  Agner Fog,et al.  Electronic semiconducting oxides as pH sensors , 1984 .

[30]  S. Cogan,et al.  Sputtered iridium oxide films for neural stimulation electrodes. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

[31]  S. Lemos,et al.  Development of low-cost metal oxide pH electrodes based on the polymeric precursor method. , 2008, Analytica chimica acta.

[32]  M Hyland,et al.  Electrochemical and structural characterizations of electrodeposited iridium oxide thin-film electrodes applied to neurostimulating electrical signal , 2002 .

[33]  V. Plichon,et al.  Anodic electrodeposition of iridium oxide films , 1998 .