Interactive Computation of Coverage Regions for Wireless Communication in Multifloored Indoor Environments

For indoor wireless communication systems, radio frequency (RF) transceivers need to be placed strategically to achieve optimum communication coverage at the lowest cost. Unfortunately, the coverage region for a transceiver depends heavily on the type of building and on the placement of walls within the building. Traditionally, therefore, transceiver locations have been selected by human experts who rely on experience and heuristics to obtain the optimum (or near-optimum) placement. This paper describes an interactive software system that can be used to assist in transceiver placement. It is intended to be easy to use by individuals who are not experts at wireless communication system design. After the user has selected transceiver locations within a graphical floor plan, the system interprets the floor plan and uses simple path loss models to estimate coverage regions for each transceiver. These regions are highlighted, enabling the user to assess the total coverage. This paper describes the methodology used to compute the coverage regions for multifloored buildings and discusses the effect of interference sources. The resulting system is expected to be useful in the specification of indoor wireless systems.

[1]  D. C. Cox,et al.  800-MHz attenuation measured in and around suburban houses , 1984, AT&T Bell Laboratories Technical Journal.

[2]  T.S. Rappaport,et al.  Indoor radio communications for factories of the future , 1989, IEEE Communications Magazine.

[3]  H. Bertoni,et al.  Mechanisms governing propagation between different floors in buildings , 1993 .

[4]  Kevin W. Sowerby,et al.  Estimating Regions of Service in Wireless Indoor Communication Systems , 1995 .

[5]  C. Banerjee,et al.  Four-frequency radiowave propagation measurements of the indoor environment in a large metropolitan commercial building , 1991, IEEE Global Telecommunications Conference GLOBECOM '91: Countdown to the New Millennium. Conference Record.

[6]  D. A. Rappaport,et al.  Radio propagation measurements at 850 MHz, 1.7 GHz and 4 GHz inside two dissimilar office buildings , 1990 .

[7]  H. Hashemi,et al.  The indoor radio propagation channel , 1993, Proc. IEEE.

[8]  A. J. Motley,et al.  Radio coverage in buildings , 1990 .

[9]  A. J. Motley,et al.  Personal communication radio coverage in buildings at 900 MHz and 1700 MHz , 1988 .

[10]  D.C. Cox,et al.  Universal portable radio communications , 1985, IEEE Transactions on Vehicular Technology.

[11]  Theodore S. Rappaport,et al.  Measurements and Models of Radio Frequency Impulsive Noise for Indoor Wireless Communications , 1993, IEEE J. Sel. Areas Commun..

[12]  S. Seidel,et al.  914 MHz path loss prediction models for indoor wireless communications in multifloored buildings , 1992 .

[13]  Davood Molkdar,et al.  Review on radio propagation into and within buildings , 1991 .

[14]  T.S. Rappaport,et al.  Radio-wave propagation for emerging wireless personal-communication systems , 1994, IEEE Antennas and Propagation Magazine.

[15]  Reinaldo A. Valenzuela.  A ray tracing approach to predicting indoor wireless transmission , 1993, IEEE 43rd Vehicular Technology Conference.

[16]  A. Lynn Abbott,et al.  An Interactive System for Visualizing Wireless Communication Coverage within Buildings , 1995 .

[17]  Theodore S. Rappaport,et al.  The impact of surrounding buildings on propagation for wireless in-building personal communications system design , 1992, [1992 Proceedings] Vehicular Technology Society 42nd VTS Conference - Frontiers of Technology.

[18]  D. A. Hawbaker,et al.  Indoor wideband radiowave propagation measurements at 1.3 GHz and 4.0 GHz , 1990 .

[19]  Theodore S. Rappaport,et al.  Propagation measurements and models for wireless communications channels , 1995, IEEE Commun. Mag..

[20]  K. Pahlavan,et al.  Multipath propagation measurements on manufacturing floors at 910 MHz , 1989 .

[21]  M. Lecours,et al.  Measurement and modeling of propagation losses in a building at 900 MHz , 1990 .

[22]  Theodore S. Rappaport,et al.  Wireless communications - principles and practice , 1996 .

[23]  T. Rappaport.  Characterization of UHF multipath radio channels in factory buildings , 1989 .

[24]  Theodore S. Rappaport,et al.  Site-specific propagation prediction for wireless in-building personal communication system design , 1994 .