Effect of Magnetic Properties of Magnetic Composite Tapes on Motor Losses

Alternating current (AC) copper losses in motors increase with carrier frequency of the pulse width modulation (PWM) and are further increased by leakage flux of the permanent magnet. Therefore, AC copper losses increase with motor speed. Conventional techniques for reducing AC copper losses tend to increase other losses. In this paper, AC copper loss was reduced by wrapping a magnetic tape made of a magnetic composite material around the winding. This method controlled the flux path through the winding. Magnetic composite materials are mixtures of magnetic powders and liquid resins whose magnetic properties can be manipulated by changing the combination and other factors. When Fe–Si–Al magnetic tape was wrapped around the winding, the AC copper loss was reduced by 40%. The loss was further reduced by optimizing the magnetic properties of the magnetic composite material. The AC copper loss was maximally reduced when the specific permeability was 100 and the saturation flux density was 1.6. Magnetic tapes composed of magnetic composite materials with high saturation flux density and specific permeability reduce the AC copper losses without increasing other losses in the motor.

[1]  B. Kou,et al.  Multi-Objective Optimization Design of a Stator Coreless Multidisc Axial Flux Permanent Magnet Motor , 2022, Energies.

[2]  A. Dinescu,et al.  Epoxy Coatings Containing Modified Graphene for Electromagnetic Shielding , 2022, Polymers.

[3]  J. Cros,et al.  Comparison between Space Mapping and Direct FEA Optimizations for the Design of Halbach Array PM Motor , 2022, Energies.

[4]  J. C. Cabanelas,et al.  Recent Advances in MXene/Epoxy Composites: Trends and Prospects , 2022, Polymers.

[5]  Chenggao Li,et al.  Effect of the Addition of Thermoplastic Resin and Composite on Mechanical and Thermal Properties of Epoxy Resin , 2022, Polymers.

[6]  D. Matt,et al.  Concept, Feasibility of Cylindrical Bar Winding for Low Voltage Permanent Magnet Synchronous Motor , 2022, Energies.

[7]  Yuanjun Liu,et al.  A Flexible Sandwich Structure Carbon Fiber Cloth with Resin Coating Composite Improves Electromagnetic Wave Absorption Performance at Low Frequency , 2022, Polymers.

[8]  A. Rosskopf,et al.  Enhancing Litz Wire Power Loss Calculations by Combining a Sparse Strand Element Equivalent Circuit Method With a Voronoi-Based Geometry Model , 2022, IEEE Transactions on Power Electronics.

[9]  Chenggao Li,et al.  Hygrothermal resistance of pultruded carbon, glass and carbon/glass hybrid fiber reinforced epoxy composites , 2021, Construction and Building Materials.

[10]  Mitsuhide Sato,et al.  Alternating-Current Copper Loss Reduction in a High-Frequency Transformer for Railways Using a Magnetic Tape , 2021, IEEE Transactions on Magnetics.

[11]  Jang-Young Choi,et al.  Experimental Verification and Analytical Approach for Electromagnetic Characteristics of a High-Speed Permanent Magnet Motor with Two Different Rotors and Winding Patterns , 2021, Applied Sciences.

[12]  Bin Wang,et al.  Effect of Immersion in Water or Alkali Solution on the Structures and Properties of Epoxy Resin , 2021, Polymers.

[13]  P. Shukla,et al.  Polymer Nanocomposites in Sensor Applications: A Review on Present Trends and Future Scope , 2021, Chinese Journal of Polymer Science.

[14]  Anupama Hiremath,et al.  Nanoparticles Filled Polymer Nanocomposites: A Technological Review , 2021, Cogent Engineering.

[15]  T. Mizuno,et al.  Reducing Rotor Temperature Rise in Concentrated Winding Motor by Using Magnetic Powder Mixed Resin Ring , 2020, Energies.

[16]  T. Mizuno,et al.  Reduction of Rotor Loss and Torque Ripple in an IPMSM using Magnetic Wedges , 2020, 2020 23rd International Conference on Electrical Machines and Systems (ICEMS).

[17]  T. Dimier,et al.  Comparison of Stator Winding Technologies for High-Speed Motors in Electric Propulsion Systems , 2020, 2020 International Conference on Electrical Machines (ICEM).

[18]  T. Mizuno,et al.  Reducing the Alternating Current Resistance and Heat Generation in a Single‐Wire Coil Using a Magnetic Tape , 2020, IEEJ Transactions on Electrical and Electronic Engineering.

[19]  Chenggao Li,et al.  Long-term service evaluation of a pultruded carbon/glass hybrid rod exposed to elevated temperature, hydraulic pressure and fatigue load coupling , 2020 .

[20]  Yihua Hu,et al.  Effect of Slot Opening Width on the Air-Gap Magnetic Field of a Direct Drive Permanent Magnet Motor , 2019, Applied Sciences.

[21]  Selami Kesler,et al.  Design and Implementation of a Low Power Outer-Rotor Line-Start Permanent-Magnet Synchronous Motor for Ultra-Light Electric Vehicles , 2019, Energies.

[22]  Yuan Yuan,et al.  Design Optimization and Analysis of an Outer-Rotor Direct-Drive Permanent-Magnet Motor for Medium-Speed Electric Vehicle , 2019, World Electric Vehicle Journal.

[23]  U. Nirmal,et al.  Progress on drone technology and their applications: A comprehensive review , 2018 .

[24]  Sai Sudheer Reddy Bonthu,et al.  Optimal Torque Ripple Reduction Technique for Outer Rotor Permanent Magnet Synchronous Reluctance Motors , 2018, IEEE Transactions on Energy Conversion.

[25]  Andrzej Łebkowski,et al.  Design, Analysis of the Location and Materials of Neodymium Magnets on the Torque and Power of In-Wheel External Rotor PMSM for Electric Vehicles , 2018, Energies.

[26]  Toshiro Sato,et al.  Fabrication and Evaluation of Composite Magnetic Core Using Iron-Based Amorphous Alloy Powder With Different Particle Size Distributions , 2018, IEEE Transactions on Magnetics.

[27]  Bernd Ponick,et al.  Challenges and Opportunities of Very Light High-Performance Electric Drives for Aviation , 2018 .

[28]  K. Haran,et al.  High power density superconducting rotating machines—development status and technology roadmap , 2017 .

[29]  Ching Chuen Chan,et al.  Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles , 2008, IEEE Transactions on Industrial Electronics.