Micropeg manipulation with a compliant microgripper

This paper presents analytical, simulation and experimental results from a study of compliant insertion tasks in microassembly. Gripper compliance is desirable to compensate for positional errors and to prevent the breakage of a gripper during assembly tasks. An analytical model is derived to study the motion and force profiles during compliant insertion. Thermal bimorph microgrippers with a compliant tip are designed and fabricated using a silicon DRIE process, and are mounted on a precision motion stage. A series of micropeg manipulation tasks such as pick up, rotation, and insertion are successfully performed. Finally, a comb structure is integrated in the gripper to calculate insertion force by measuring the deflection of a gripper, which is essential for automated microassembly.

[1]  Fumihito Arai,et al.  Adhesion-type micro end effector for micromanipulation , 1997, Proceedings of International Conference on Robotics and Automation.

[2]  Robert J. Wood,et al.  PROTOTYPING MILLIROBOTS USING DEXTROUS MICROASSEMBLY AND FOLDING , 2000 .

[3]  Bruce Randall Donald,et al.  Sensorless manipulation using massively parallel microfabricated actuator arrays , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[4]  M. Ellis,et al.  Micro-assembly for top-down nanotechnology , 2000, MHS2000. Proceedings of 2000 International Symposium on Micromechatronics and Human Science (Cat. No.00TH8530).

[5]  Bradley J. Nelson,et al.  Sensing nanonewton level forces by visually tracking structural deformations , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[6]  Stéphane Régnier,et al.  Manipulation of micro-objects using adhesion forces and dynamical effects , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[7]  Victor M. Bright,et al.  Thermal microactuators for surface-micromachining processes , 1995, MOEMS-MEMS.

[8]  R. Buser,et al.  Tactile microgripper for automated handling of microparts , 1996 .

[9]  Daniel E. Whitney,et al.  Quasi-Static Assembly of Compliantly Supported Rigid Parts , 1982 .

[10]  Yu Zhou,et al.  Adhesion force modeling and measurement for micromanipulation , 1998, Other Conferences.