A three-dimensional model of droplet impact and solidification

Abstract A three-dimensional model has been developed to simulate the fluid dynamics, heat transfer and phase-change that occur when a molten metal droplet falls onto a flat substrate. The model is an extension of one developed by Bussmann et al. [Phys. Fluids 11 (1999) 1406] and combines a fixed-grid control volume discretization of the fluid flow and energy equations with a volume-tracking algorithm to track the droplet free surface, and an improved fixed velocity method to track the solidification front. Surface tension is modeled as a volume force acting on fluid near the free surface. Contact angles are applied as a boundary condition at liquid–solid contact lines. The energy equations in both the liquid and solid portions of the droplet are solved using the Enthalpy method. Heat transfer within the substrate is by conduction alone. Thermal contact resistance at the droplet–substrate interface is included in the model. We studied the deposition of tin droplets on a stainless steel surface using both experiments and numerical simulations. The results of two different scenarios are presented: the normal impact of a 2.7 mm tin droplet at 1 m/s, and of the oblique impact of a 2.2 mm tin droplet at 2.35 m/s onto a surface inclined at 45° to the horizontal. Images obtained from numerical model were compared with experimental photographs and found to agree well.

[1]  M. Fard.  Splat shapes in a thermal spray coating process: simulations and experiments , 2000 .

[2]  Roger H. Rangel,et al.  Numerical simulation of substrate impact and freezing of droplets in plasma spray processes , 1993 .

[3]  M. Pasandideh-Fard.  Droplet impact and solidification in a thermal spray process , 1998 .

[4]  D. B. Kothe,et al.  RIPPLE: A Computer Program for Incompressible Flows with Free Surfaces , 1991 .

[5]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[6]  Markus Bussmann,et al.  Modeling the splash of a droplet impacting a solid surface , 2000 .

[7]  I. Doltsinis,et al.  Thermomechanical Simulation of the Splashing of Ceramic Droplets on a Rigid Substrate , 1997 .

[8]  Gerardo Trapaga,et al.  Mathematical modeling of the isothermal impingement of liquid droplets in spraying processes , 1991 .

[9]  Saeid Shakeri Siavoshani.  Effect of substrate properties on molten metal droplet impact , 2001 .

[10]  Dimos Poulikakos,et al.  Wetting effects on the spreading of a liquid droplet colliding with a flat surface: Experiment and modeling , 1995 .

[11]  M. Pasandideh-Fard,et al.  Capillary effects during droplet impact on a solid surface , 1996 .

[12]  Sanjeev Chandra,et al.  Impact, recoil and splashing of molten metal droplets , 2000 .

[13]  Javad Mostaghimi,et al.  Deposition of tin droplets on a steel plate: simulations and experiments , 1998 .

[14]  Francis H. Harlow,et al.  The Splash of a Liquid Drop , 1967 .

[15]  Jiro Senda,et al.  Numerical Analysis of the Deformation Process of a Droplet Impinging upon a Wall , 1990 .

[16]  Dimos Poulikakos,et al.  Solidification phenomena in picoliter size solder droplet deposition on a composite substrate , 1997 .

[17]  S. Chandra,et al.  On a three-dimensional volume tracking model of droplet impact , 1999 .

[18]  Won Soon Chang,et al.  A numerical analysis of Stefan problems for generalized multi-dimensional phase-change structures using the enthalpy transforming model , 1989 .

[19]  Dimos Poulikakos,et al.  Heat transfer and fluid dynamics during the collision of a liquid droplet on a substrate—II. Experiments , 1996 .

[20]  J. Brackbill,et al.  A continuum method for modeling surface tension , 1992 .

[21]  Mark Cross,et al.  An explicit numerical method to , 1983 .

[22]  J. C. Jaeger,et al.  Conduction of Heat in Solids , 1952 .

[23]  H. Zhang,et al.  AN ADAPTIVE LEVEL SET METHOD FOR MOVING-BOUNDARY PROBLEMS: APPLICATION TO DROPLET SPREADING AND SOLIDIFICATION , 2000 .