Studies on glass/epoxy and basalt/epoxy thin-walled pressure vessels subjected to internal pressure using ultrasonic ‘C’ scan technique
暂无分享,去创建一个
[1] V. Manikandan,et al. Study of low velocity impact failure responses of woven basalt fiber reinforced polymer composites using ultrasonic A, B and C scan techniques , 2022, Advances in Materials and Processing Technologies.
[2] V. Arumugaprabu,et al. Review of advanced techniques for manufacturing biocomposites: non-destructive evaluation and artificial intelligence-assisted modeling , 2022, Journal of Materials Science.
[3] Ö. Sahin,et al. Effect of oil pressure upon filament wound basalt/glass fibers hybrid polymer based composite pipes subjected to low velocity impact , 2022, Composite Structures.
[4] K. Khan,et al. Experimental Characterization and Modeling Multifunctional Properties of Epoxy/Graphene Oxide Nanocomposites , 2021, Polymers.
[5] S. Siengchin,et al. Effect of Fiber Volume Fraction on Mechanical and Fire Resistance Properties of Basalt/Polyester and Pineapple/Polyester Composites , 2021, Journal of Natural Fibers.
[6] T. Zirakian,et al. Parametric study on buckling stability of CFRP-strengthened cylindrical shells subjected to uniform external pressure , 2021 .
[7] M. Escobar,et al. Electrical properties of polymer blend composites based on Silicone rubber/EPDM/clay for high voltage insulators , 2021, Journal of Composites and Compounds.
[8] Lalit Ranakoti,et al. Effect of silica nanoparticles on physical, mechanical, and wear properties of natural fiber reinforced polymer composites , 2021 .
[9] A. Diwan,et al. Enhancement Tensile Strength, Creep Resistance and Hardness of an Epoxy Resin by Adding SiO2 Nanoparticles , 2021 .
[10] Parinya Chakartnarodom,et al. Properties and performance of the basalt-fiber reinforced texture roof tiles , 2020 .
[11] N. Gupta,et al. High strain rate studies for different laminate configurations of bi-directional glass/epoxy and carbon/epoxy composites using DIC , 2020 .
[12] I. Shuvo. Fibre attributes and mapping the cultivar influence of different industrial cellulosic crops (cotton, hemp, flax, and canola) on textile properties , 2020, Bioresources and Bioprocessing.
[13] S. Rusnáková,et al. Preparation, Thermal Analysis, and Mechanical Properties of Basalt Fiber/Epoxy Composites , 2020, Polymers.
[14] K. Khan,et al. Temperature-Frequency–Dependent Viscoelastic Properties of Neat Epoxy and Fiber Reinforced Polymer Composites: Experimental Characterization and Theoretical Predictions , 2020, Polymers.
[15] P. L. Ee,et al. Silica Nanoparticles—A Versatile Tool for the Treatment of Bacterial Infections , 2020, Frontiers in Chemistry.
[16] M. Sayyad. Predicting Tensile Behaviour Of Bulk Bamboo Using Weibull Statistics For Progressive Failure , 2020 .
[17] Kamran Alam Khan,et al. The use of X-ray computed tomography for design and process modeling of aerospace composites: A review , 2020 .
[18] S. Ilangovan,et al. Effect of nanoparticles loading on free vibration response of epoxy and filament winding basalt/epoxy and E-glass/epoxy composite tubes: experimental, analytical and numerical investigations , 2020, Materials Research Express.
[19] P. Carlone,et al. Marine Application of Fiber Reinforced Composites: A Review , 2020 .
[20] R. Velmurugan,et al. Layer-wise damage prediction in carbon/Kevlar/S-glass/E-glass fibre reinforced epoxy hybrid composites under low-velocity impact loading using advanced 3D computed tomography , 2020, International Journal of Crashworthiness.
[21] S. Prasanraj. Advanced Composite Materials in Cryogenic Propellant Tank , 2019 .
[22] Shivarudraiah,et al. Tribological Properties of Basalt Fibers - A Review , 2019, Materials Science Forum.
[23] Arul Arulrajah,et al. Amazing Types, Properties, and Applications of Fibres in Construction Materials , 2019, Materials.
[24] S. Ilangovan,et al. Effect of silica nanoparticles on mechanical and thermal properties of neat epoxy and filament wounded E-glass/epoxy and basalt/epoxy composite tubes , 2019, Materials Research Express.
[25] Elisabetta Monaldo,et al. Basalt-based fiber-reinforced materials and structural applications in civil engineering , 2019, Composite Structures.
[26] T. Sebaey. Design of Oil and Gas Composite Pipes for Energy Production , 2019, Energy Procedia.
[27] Zongwen Li,et al. Properties and Applications of Basalt Fiber and Its Composites , 2018, IOP Conference Series: Earth and Environmental Science.
[28] R. Velmurugan,et al. Digital image processing and thermo-mechanical response of neat epoxy and different laminate orientations of fiber reinforced polymer composites for vibration isolation applications , 2018, International Journal of Polymer Analysis and Characterization.
[29] A. B. Uygur,et al. A novel burst test approach for the qualification of heat pipes developed for space applications , 2018, International Journal of Pressure Vessels and Piping.
[30] Lin Sang,et al. Crystallization and mechanical properties of basalt fiber-reinforced polypropylene composites with different elastomers , 2018, Journal of Thermal Analysis and Calorimetry.
[31] Meihua Yu,et al. Room temperature synthesis of dendritic mesoporous silica nanoparticles with small sizes and enhanced mRNA delivery performance. , 2018, Journal of materials chemistry. B.
[32] P. Maruschak,et al. Evaluation of Failure Pressure for Gas Pipelines with Combined Defects , 2018 .
[33] R. Velmurugan,et al. Effect of nanoclay and different impactor shapes on glass/epoxy composites subjected to quasi-static punch shear loading , 2018 .
[34] R. Velmurugan,et al. Reliability analysis of tensile strengths using Weibull distribution in glass/epoxy and carbon/epoxy composites , 2018 .
[35] M. H. Lapena,et al. Mechanical Characterization of Basalt and Glass Fiber Epoxy Composite Tube , 2017 .
[36] S. Pavlopoulou,et al. Numerical and Experimental Investigation of the Hydrostatic Performance of Fibre Reinforced Tubes , 2017, Applied Composite Materials.
[37] G. Liaghat,et al. Effect of nano-particles on the tensile, flexural and perforation properties of the glass/epoxy composites , 2017 .
[38] Yohanes,et al. Effects of mixed micro and nano silica particles on the dynamic compressive performances of epoxy adhesive , 2017, Applied Adhesion Science.
[39] N. Gupta,et al. Statistical analysis of the tensile strength of GFRP, CFRP and hybrid composites , 2017 .
[40] S. I. Gutnikov,et al. Effect of silane/nano-silica on the mechanical properties of basalt fiber reinforced epoxy composites , 2017 .
[41] Ayush Morchhale,et al. Design and Finite Element Analysis of Hydrostatic Pressure Testing Machine used for Ductile Iron Pipes , 2016 .
[42] R. Velmurugan,et al. Effect of high strain rate on glass/carbon/hybrid fiber reinforced epoxy laminated composites , 2016 .
[43] V. Eskizeybek,et al. Evaluating the effectiveness of nanofillers in filament wound carbon/epoxy multiscale composite pipes , 2016 .
[44] Yang Shen,et al. Characterization of mesoporous silica nanoparticle composites at low filler content , 2016 .
[45] A. Gibson,et al. Burst strength and impact behaviour of hydrothermally aged glass fibre/epoxy composite pipes , 2016 .
[46] M. Yahya,et al. Mechanical Behavior of Composite Multilayered Basalt/E-Glass/Epoxy Pipe under Internal Pressure , 2015 .
[47] D. Hui,et al. A short review on basalt fiber reinforced polymer composites , 2015 .
[48] R. Masoodi,et al. The Effect of Nanoparticles Percentage on Mechanical Behavior of Silica-Epoxy Nanocomposites , 2013 .
[49] S. Mirza,et al. Experimental investigation of filament-wound composite tubes for mechanical characterization by internal pressure testing , 2013, Proceedings of 2013 10th International Bhurban Conference on Applied Sciences & Technology (IBCAST).
[50] Jinyuan Zhou,et al. A modified Weibull model for tensile strength distribution of carbon nanotube fibers with strain rate and size effects , 2012 .
[51] Murat Sari,et al. Residual failure pressures and fatigue life of filament-wound composite pipes subjected to lateral impact , 2012 .
[52] A. Kinloch,et al. The effect of silica nanoparticles and carbon nanotubes on the toughness of a thermosetting epoxy polymer , 2011 .
[53] Chul-Jin Moon,et al. Buckling of filament-wound composite cylinders subjected to hydrostatic pressure for underwater vehicle applications , 2010 .
[54] Constantinos Soutis,et al. Effect of silica nanoparticles on compressive properties of an epoxy polymer , 2010 .
[55] P. Mertiny,et al. Evaluation of Glass and Basalt Fiber Reinforcements for Polymer Composite Pressure Piping , 2009 .
[56] A. Avci,et al. Fatigue crack growth of filament wound GRP pipes with a surface crack under cyclic internal pressure , 2008 .
[57] J.M. Hurley,et al. Estimating the Engineering Properties of Electronic Packaging Materials , 2008, IEEE Transactions on Components and Packaging Technologies.
[58] P. Mertiny,et al. Quantification of leakage damage in high-pressure fibre-reinforced polymer composite tubular vessels , 2007 .
[59] S. Kim,et al. Effect of Silica Nanoparticle on the Quiescent and the Shear Induced Crystallization Behaviors of Poly(trimethylene terephthalate) , 2004 .
[60] Jonathan S Dordick,et al. Silica nanoparticle size influences the structure and enzymatic activity of adsorbed lysozyme. , 2004, Langmuir : the ACS journal of surfaces and colloids.
[61] Kamran Alam Khan,et al. Single and multi-layer core designs for Pseudo-Ductile failure in honeycomb sandwich structures , 2021 .
[62] R. Velmurugan,et al. Experimental and theoretical investigation of a unidirectional glass/epoxy composites under tensile and impact loading , 2018 .
[63] R. Daud,et al. Influence of hydrothermal ageing on the compressive behaviour of glass fibre/epoxy composite pipes , 2017 .
[64] N. Gupta,et al. Probability-based Studies on the Tensile Strength of GFRP, CFRP and Hybrid Composites☆ , 2017 .
[65] Saravanan Karuppanan,et al. Structural Analysis of Basalt Fiber Reinforced Plastic Wind Turbine Blade , 2014 .
[66] G. Rajkumar,et al. Investigation of Burst Pressure on Carbon / Glass Fiber Reinforced Polymer Metal Tube for High Pressure Applications☆ , 2014 .
[67] K. Kromp,et al. Statistical properties of Weibull estimators , 1991 .