Suppression of the Shuttle Effect in Li–S Batteries via Magnetron Sputtered TiO2 Thin Film at the Electrode–Electrolyte Interface

The practical application of lithium–sulfur (Li–S) batteries is still an issue mainly due to the shuttle phenomenon originating from the migration of lithium polysulfides (LiPs) between the electro...

[1]  Conor P. Cullen,et al.  A Robust, Freestanding MXene‐Sulfur Conductive Paper for Long‐Lifetime Li–S Batteries , 2019, Advanced Functional Materials.

[2]  Baohua Li,et al.  Co-Fe Mixed Metal Phosphide Nanocubes with Highly Interconnected-Pore Architecture as an Efficient Polysulfide Mediator for Lithium-Sulfur Batteries. , 2019, ACS nano.

[3]  Zhengnan Tian,et al.  Biotemplating Growth of Nepenthes-like N-Doped Graphene as a Bifunctional Polysulfide Scavenger for Li-S Batteries. , 2018, ACS nano.

[4]  Yan‐Bing He,et al.  Functional Carbons Remedy the Shuttling of Polysulfides in Lithium–Sulfur Batteries: Confining, Trapping, Blocking, and Breaking up , 2018 .

[5]  Conor P. Cullen,et al.  In Situ Formed Protective Barrier Enabled by Sulfur@Titanium Carbide (MXene) Ink for Achieving High‐Capacity, Long Lifetime Li‐S Batteries , 2018, Advanced science.

[6]  M. Ozkan,et al.  Improved electrochemical performance of LiCoO_2 electrodes for high-voltage operations by Ag thin film coating via magnetron sputtering , 2018, MRS Advances.

[7]  Xin-Bing Cheng,et al.  Lithium metal protection through in-situ formed solid electrolyte interphase in lithium-sulfur batteries: The role of polysulfides on lithium anode , 2016 .

[8]  Wei Wang,et al.  Corrosion resistance of sintered NdFeB coated with SiC/Al bilayer thin films by magnetron sputtering , 2016 .

[9]  Ya‐Xia Yin,et al.  Rice husk-derived hierarchical silicon/nitrogen-doped carbon/carbon nanotube spheres as low-cost and high-capacity anodes for lithium-ion batteries , 2016 .

[10]  R. Mane,et al.  D-sorbitol-induced phase control of TiO2 nanoparticles and its application for dye-sensitized solar cells , 2016, Scientific Reports.

[11]  Yuegang Zhang,et al.  Chemical routes toward long-lasting lithium/sulfur cells , 2016, Nano Research.

[12]  Zhe Yuan,et al.  Powering Lithium-Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts. , 2016, Nano letters.

[13]  Mahesh Kumar Joshi,et al.  Immobilization of TiO2 nanofibers on reduced graphene sheets: Novel strategy in electrospinning. , 2015, Journal of colloid and interface science.

[14]  Taner Zerrin,et al.  Optical, structural and bonding properties of diamond-like amorphous carbon films deposited by DC magnetron sputtering , 2015 .

[15]  Yi Cui,et al.  Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium-Sulfur Batteries. , 2015, Nano letters.

[16]  Shaoming Huang,et al.  A Lightweight TiO2/Graphene Interlayer, Applied as a Highly Effective Polysulfide Absorbent for Fast, Long‐Life Lithium–Sulfur Batteries , 2015, Advanced materials.

[17]  Huisheng Peng,et al.  A revolution in electrodes: recent progress in rechargeable lithium-sulfur batteries. , 2015, Small.

[18]  M. Zheng,et al.  Conductive Lewis Base Matrix to Recover the Missing Link of Li2S8 during the Sulfur Redox Cycle in Li–S Battery , 2015 .

[19]  A. Manthiram,et al.  Lithium–Sulfur Batteries: Progress and Prospects , 2015, Advanced materials.

[20]  Jiong Shen,et al.  Corrosion resistance of the NdFeB coated with AlN/SiC bilayer thin films by magnetron sputtering under different environments , 2015 .

[21]  Xiao Liang,et al.  A highly efficient polysulfide mediator for lithium–sulfur batteries , 2015, Nature Communications.

[22]  Yi Cui,et al.  Strong sulfur binding with conducting Magnéli-phase Ti(n)O2(n-1) nanomaterials for improving lithium-sulfur batteries. , 2014, Nano letters.

[23]  Jinghua Guo,et al.  High-rate, ultralong cycle-life lithium/sulfur batteries enabled by nitrogen-doped graphene. , 2014, Nano letters.

[24]  K. Jiang,et al.  Sulfur nanocrystals confined in carbon nanotube network as a binder-free electrode for high-performance lithium sulfur batteries. , 2014, Nano letters.

[25]  Jun Liu,et al.  V2O5 Polysulfide Anion Barrier for Long-Lived Li–S Batteries , 2014 .

[26]  Yi Cui,et al.  Improving lithium–sulphur batteries through spatial control of sulphur species deposition on a hybrid electrode surface , 2014, Nature Communications.

[27]  Yi Cui,et al.  Sulfur cathodes with hydrogen reduced titanium dioxide inverse opal structure. , 2014, ACS Nano.

[28]  Guohua Chen,et al.  Fabrication of High Conductive S/C Cathode by Sulfur Infiltration into Hierarchical Porous Carbon/Carbon Fiber Weave-Structured Materials via Vapor-Melting Method , 2014 .

[29]  Hong‐Jie Peng,et al.  Nanoarchitectured Graphene/CNT@Porous Carbon with Extraordinary Electrical Conductivity and Interconnected Micro/Mesopores for Lithium‐Sulfur Batteries , 2014 .

[30]  G. Shi,et al.  Performance enhancement of a graphene–sulfur composite as a lithium–sulfur battery electrode by coating with an ultrathin Al2O3 film via atomic layer deposition , 2014 .

[31]  S. E. Mochalov,et al.  Determination of lithium sulphur batteries internal resistance by the pulsed method during galvanostatic cycling , 2014 .

[32]  Li-Jun Wan,et al.  Lithium-sulfur batteries: electrochemistry, materials, and prospects. , 2013, Angewandte Chemie.

[33]  L. Nazar,et al.  Tailoring porosity in carbon nanospheres for lithium-sulfur battery cathodes. , 2013, ACS nano.

[34]  Ashok K. Vijh,et al.  Importance of open pore structures with mechanical integrity in designing the cathode electrode for lithium–sulfur batteries , 2013 .

[35]  Huichao Chen,et al.  Bottom-Up Catalytic Approach towards Nitrogen-Enriched Mesoporous Carbons/Sulfur Composites for Superior Li-S Cathodes , 2013, Scientific Reports.

[36]  Jung Tae Lee,et al.  Plasma‐Enhanced Atomic Layer Deposition of Ultrathin Oxide Coatings for Stabilized Lithium–Sulfur Batteries , 2013 .

[37]  Feng Li,et al.  Carbon–sulfur composites for Li–S batteries: status and prospects , 2013 .

[38]  Richard Van Noorden.  Sulphur back in vogue for batteries , 2013, Nature.

[39]  Shengbo Zhang,et al.  Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions , 2013 .

[40]  X. Tao,et al.  Highly mesoporous carbon foams synthesized by a facile, cost-effective and template-free Pechini method for advanced lithium–sulfur batteries , 2013 .

[41]  Christopher M Wolverton,et al.  Electrical energy storage for transportation—approaching the limits of, and going beyond, lithium-ion batteries , 2012 .

[42]  Yuhua Wang,et al.  Highly dispersive {001} facets-exposed nanocrystalline TiO2 on high quality graphene as a high performance photocatalyst , 2012 .

[43]  Doron Aurbach,et al.  Sulfur‐Impregnated Activated Carbon Fiber Cloth as a Binder‐Free Cathode for Rechargeable Li‐S Batteries , 2011, Advanced materials.

[44]  Jean-Marie Tarascon,et al.  Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.

[45]  Gérard Férey,et al.  Cathode composites for Li-S batteries via the use of oxygenated porous architectures. , 2011, Journal of the American Chemical Society.

[46]  Feng Li,et al.  Battery Performance and Photocatalytic Activity of Mesoporous Anatase TiO2 Nanospheres/Graphene Composites by Template‐Free Self‐Assembly , 2011 .

[47]  Hiroshi Senoh,et al.  Preparation of electrochemically active lithium sulfide-carbon composites using spark-plasma-sintering process , 2010 .

[48]  Linda F. Nazar,et al.  Positive Electrode Materials for Li-Ion and Li-Batteries† , 2010 .

[49]  Stefano de Gironcoli,et al.  QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials , 2009, Journal of physics. Condensed matter : an Institute of Physics journal.

[50]  L. Nazar,et al.  A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries. , 2009, Nature materials.

[51]  Xinping Qiu,et al.  New insight into the discharge process of sulfur cathode by electrochemical impedance spectroscopy , 2009 .

[52]  Wmm Erwin Kessels,et al.  Surface passivation of high‐efficiency silicon solar cells by atomic‐layer‐deposited Al2O3 , 2008 .

[53]  D. Bavykin,et al.  Protonated Titanates and TiO2 Nanostructured Materials: Synthesis, Properties, and Applications , 2006 .

[54]  Jun Chen,et al.  UV Raman spectroscopic study on TiO2. I. Phase transformation at the surface and in the bulk. , 2006, The journal of physical chemistry. B.

[55]  Wenbin Zheng,et al.  Novel nanosized adsorbing sulfur composite cathode materials for the advanced secondary lithium batteries , 2006 .

[56]  Carlo Cavazzoni,et al.  First-principles codes for computational crystallography in the Quantum-ESPRESSO package , 2005 .

[57]  Mikko Ritala,et al.  Atomic layer deposition chemistry: recent developments and future challenges. , 2003, Angewandte Chemie.

[58]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[59]  D. Qu,et al.  Reduction mechanism of sulfur in lithium–sulfur battery: From elemental sulfur to polysulfide , 2016 .

[60]  A. Manthiram,et al.  High‐Energy, High‐Rate, Lithium–Sulfur Batteries: Synergetic Effect of Hollow TiO2‐Webbed Carbon Nanotubes and a Dual Functional Carbon‐Paper Interlayer , 2016 .

[61]  Jiulin Wang,et al.  Sulfur‐Based Composite Cathode Materials for High‐Energy Rechargeable Lithium Batteries , 2015, Advanced materials.

[62]  Wang Wenjun,et al.  Reduced graphene oxide with ultrahigh conductivity as carbon coating layer for high performance sulfur@reduced graphene oxide cathode , 2014 .

[63]  R. Fletcher,et al.  A New Approach to Variable Metric Algorithms , 1970, Comput. J..