Effect of two-step increased temperature thermal rolling on anisotropy and stretch formability of AZ31 magnesium alloy sheets

[1]  W. Ding,et al.  Effects of annealing on mechanical properties and degradation behavior of biodegradable JDBM magnesium alloy wires , 2021, Transactions of Nonferrous Metals Society of China.

[2]  J. Kuang,et al.  On the strengthening and slip activity of Mg-3Al-1Zn alloy with pre-induced {101¯2} twins , 2021, Journal of Magnesium and Alloys.

[3]  N. Li,et al.  Deformation mechanisms of basal slip, twinning and non-basal slips in Mg–Y alloy by micropillar compression , 2021, Materials Science and Engineering: A.

[4]  G. Faraji,et al.  Properties inhomogeneity of AM60 magnesium alloy processed by cyclic extrusion compression angular pressing followed by extrusion , 2021 .

[5]  C. Pruncu,et al.  Evolution of twinning and shear bands in magnesium alloys during rolling at room and cryogenic temperature , 2020 .

[6]  Y. Mine,et al.  Temperature dependence of prismatic slip in a single-crystalline long-period stacking ordered Mg–Zn–Y alloy , 2020 .

[7]  Y. Hua,et al.  Influence of trace Ca addition on texture and stretch formability of AM50 magnesium alloy sheet , 2020, Transactions of Nonferrous Metals Society of China.

[8]  Shu-nong Jiang,et al.  Microstructure, texture and mechanical anisotropy of Mg-Gd-Y-Zr sheets processed via different rolling routes and reductions , 2020 .

[9]  W. Zhuang,et al.  Effect of deep surface rolling on microstructure and properties of AZ91 magnesium alloy , 2019, Transactions of Nonferrous Metals Society of China.

[10]  K. Hamad,et al.  Effect of Ca addition on the room-temperature formability of AZ31 magnesium alloy , 2019, Materials Letters.

[11]  Li Hu,et al.  Improved stretch formability of AZ31 sheet via texture control by introducing a continuous bending channel into equal channel angular rolling , 2018, Journal of Materials Processing Technology.

[12]  Ling Wang,et al.  Influence of rolling route on microstructure and mechanical properties of AZ31 magnesium alloy during asymmetric reduction rolling , 2018 .

[13]  Zhiquan Huang,et al.  Improvement of magnesium alloy edge cracks by multi-cross rolling , 2018 .

[14]  W. M. Rainforth,et al.  Twin recrystallization mechanisms and exceptional contribution to texture evolution during annealing in a magnesium alloy , 2017 .

[15]  A. S. Kabir,et al.  Correlation of static recrystallization and texture weakening of AZ31 magnesium alloy sheets subjected to high speed rolling , 2016 .

[16]  Lifeng Ma,et al.  Relationship between microstructure and properties during multi-pass, variable routes and different initial temperatures hot flat rolling of AZ31B magnesium alloy , 2016 .

[17]  N. Birbilis,et al.  Texture evolution during static recrystallization of cold-rolled magnesium alloys , 2016 .

[18]  Yuansheng Cheng,et al.  Tensile anisotropy of AZ91 magnesium alloy by equal channel angular processing , 2015 .

[19]  Tingting Liu,et al.  Improvement of formability and mechanical properties of magnesium alloys via pre-twinning: A review , 2014 .

[20]  Z. Liu,et al.  Effect of rolling reduction on microstructure, texture, mechanical properties and mechanical anisotropy of AZ31 magnesium alloys , 2014 .

[21]  F. Pan,et al.  Enhanced mechanical properties of AZ31 magnesium alloy sheets processed by three-directional rolling , 2013 .

[22]  F. Pan,et al.  Influence of different rolling routes on the microstructure evolution and properties of AZ31 magnesium alloy sheets , 2013 .

[23]  G. Gottstein,et al.  Shear band-related recrystallization and grain growth in two rolled magnesium-rare earth alloys , 2013 .

[24]  K. Hagihara,et al.  Non-basal slip systems operative in Mg12ZnY long-period stacking ordered (LPSO) phase with 18R and 14H structures , 2013 .

[25]  M. Mabuchi,et al.  Influence of rolling temperature on static recrystallization behavior of AZ31 magnesium alloy , 2012, Journal of Materials Science.

[26]  Gao Sang,et al.  Influence of initial texture on formability of AZ31B magnesium alloy sheets at different temperatures , 2011 .

[27]  C. Davies,et al.  Investigation of Prism 〈a〉 Slip in Warm-Rolled AZ31 Alloy , 2011 .

[28]  T. Han,et al.  Bending behavior, and evolution of texture and microstructure during differential speed warm rolling of AZ31B magnesium alloys , 2011 .

[29]  M. Mabuchi,et al.  Improvement of stretch formability of Mg–3Al–1Zn alloy sheet by high temperature rolling at finishing pass , 2011 .

[30]  J. Driver,et al.  Temperature dependency of slip and twinning in plane strain compressed magnesium single crystals , 2011 .

[31]  C. Davies,et al.  Distribution Characteristics of In-Grain Misorientation Axes in Cold-Rolled Commercially Pure Titanium and Their Correlation with Active Slip Modes , 2010 .

[32]  Y. Chino,et al.  Influences of initial texture on microstructure and stretch formability of Mg–3Al–1Zn alloy sheet obtained by a combination of high temperature and subsequent warm rolling , 2010 .

[33]  G. Tang,et al.  Texture evolution in cold-rolled AZ31 magnesium alloy during electropulsing treatment , 2009 .

[34]  Xinsheng Huang,et al.  Textures and stretch formability of Mg–6Al–1Zn magnesium alloy sheets rolled at high temperatures up to 793 K , 2009 .

[35]  M. Mabuchi,et al.  Enhancement of tensile ductility and stretch formability of magnesium by addition of 0.2 wt%(0.035 at%)Ce , 2008 .

[36]  Talal Al-Samman,et al.  Room temperature formability of a magnesium AZ31 alloy: Examining the role of texture on the deformation mechanisms , 2008 .

[37]  Z. Trojanová,et al.  Deformation behaviour of an AJ50 magnesium alloy at elevated temperatures , 2007 .

[38]  K. P. Rao,et al.  Effect of crystallographic texture on the kinetics of hot deformation of rolled Mg-3Al-1Zn alloy plate , 2006 .

[39]  S. Agnew,et al.  Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B , 2005 .

[40]  Dingfei Zhang,et al.  Microstructure and texture evolution of AZ31 magnesium alloy during large strain hot rolling , 2015 .