Estimation and compensation of dispersion for a high-resolution optical coherence tomography system

Balanced reference-sample arm dispersion is critical in optical coherence tomography systems in order to attain images with the highest axial resolution. Here, an experimental method for the estimation and correction of dispersion in an optical coherence tomography system is presented. The system dispersion was computed from two optical coherence tomography images of the reference mirror that were symmetrically placed around the zero delay point. The method was tested using a broad bandwidth spectral domain optical coherence tomography system, compensating for the dispersion caused by a 3 mm thick fused silica flat placed in the sample arm. Using our method, dispersion compensation was achieved and the axial resolution was improved from 10.6 μm to 1.9 μm in air. Results suggest that this technique can be a simple and effective method for eliminating axial resolution degradation due to dispersion mismatch between the sample and reference arm in high-resolution optical coherence tomography systems.

[1]  J. Fujimoto,et al.  High-speed phase- and group-delay scanning with a grating-based phase control delay line. , 1997, Optics letters.

[2]  M. Spring,et al.  Ultra-high resolution Fourier domain optical coherence tomography for old master paintings. , 2015, Optics express.

[3]  Bernhard Baumann,et al.  Extracting and compensating dispersion mismatch in ultrahigh-resolution Fourier domain OCT imaging of the retina. , 2012, Optics express.

[4]  Frédérique Vanholsbeeck,et al.  Dual-fiber stretcher as a tunable dispersion compensator for an all-fiber optical coherence tomography system. , 2009, Optics letters.

[5]  J. Duker,et al.  Ultrahigh-resolution, high-speed, Fourier domain optical coherence tomography and methods for dispersion compensation. , 2004, Optics express.

[6]  Y. Yagi,et al.  Imaging the Subcellular Structure of Human Coronary Atherosclerosis Using 1-μm Resolution Optical Coherence Tomography (μOCT) , 2011, Nature Medicine.

[7]  Xiaodong Chen,et al.  Dispersion compensation for FD-OCT using spectrum reconstruction. , 2015, Journal of X-ray science and technology.

[8]  J. Fujimoto,et al.  Optical Coherence Tomography , 1991 .

[9]  Kai Wang,et al.  Spectral calibration in spectral domain optical coherence tomography , 2008 .

[10]  Diaa A Khalil,et al.  Dispersion compensation in Fourier domain optical coherence tomography. , 2014, Applied optics.

[11]  I. Malitson.  Interspecimen Comparison of the Refractive Index of Fused Silica , 1965 .

[12]  T Ozaki,et al.  Spectral-domain phase microscopy with improved sensitivity using two-dimensional detector arrays. , 2011, The Review of scientific instruments.

[13]  Yingtian Pan,et al.  Dispersion compensation in high-speed optical coherence tomography by acousto-optic modulation. , 2005, Applied optics.

[14]  A. Fercher,et al.  In vivo human retinal imaging by Fourier domain optical coherence tomography. , 2002, Journal of biomedical optics.

[15]  Teresa C. Chen,et al.  Ultrahigh-resolution high-speed retinal imaging using spectral-domain optical coherence tomography. , 2004, Optics express.

[16]  Frédérique Vanholsbeeck,et al.  Dispersion compensation in Fourier domain optical coherence tomography using the fractional Fourier transform. , 2012, Optics express.

[17]  A. Bradu,et al.  Demonstration of tolerance to dispersion of master/slave interferometry. , 2015, Optics express.