Surface technology for automotive engineering

[1]  B. Szyszka,et al.  Heat treatable indium tin oxide films deposited with high power pulse magnetron sputtering , 2009 .

[2]  Wolfgang Kowalsky,et al.  Zinc tin oxide based driver for highly transparent active matrix OLED displays , 2009 .

[3]  G. Goch,et al.  Thickness microscopy based on photothermal radiometry for the measurement of thin films. , 2009, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.

[4]  I. Alig,et al.  Characterization of coating systems by scanning acoustic microscopy: Debonding, blistering and surface topology , 2009 .

[5]  T. Mueller,et al.  Influence of the deposition temperature on mechanical and tribological properties of a-C:H:Si coatings on nitrided and postoxidized steel deposited by DC-PACVD , 2008 .

[6]  V. Weihnacht,et al.  Abscheidung superharter Kohlenstoffschichten mittels Laser‐Arco® auf dem Weg vom Labor in die industrielle Serienfertigung , 2008 .

[7]  Rui F. Silva,et al.  Micro- and nano-crystalline CVD diamond coated tools in the turning of EDM graphite , 2008 .

[8]  J. Sykes,et al.  A quantitative study of blister growth on lacquered food cans by scanning acoustic microscopy , 2008 .

[9]  T. V. Gaevskaya,et al.  Effect of electrodeposition conditions on the composition, microstructure, and corrosion resistance of Zn–Ni alloy coatings , 2008 .

[10]  S. Vepřek,et al.  Industrial applications of superhard nanocomposite coatings , 2008 .

[11]  K. Bobzin,et al.  Thermal spraying of cylinder bores with the Plasma Transferred Wire Arc process , 2008 .

[12]  G. Barbezat,et al.  Thermal spray applications in powertrain contribute to the saving of energy and material resources , 2008 .

[13]  J. Gracio,et al.  A study of diamond film deposition on WC–Co inserts for graphite machining: Effectiveness of SiC interlayers prepared by HFCVD , 2008 .

[14]  Norbert Kaiser,et al.  Antireflection coating with UV-protective properties for polycarbonate. , 2008, Applied optics.

[15]  Torsten Schmidt,et al.  Nanotechnology Surface Modifications for Anti-Fog Applications in Automotive Lighting and Sensor Serial Production , 2008 .

[16]  Thorsten Dziomba,et al.  Determination of the short wavelength cutoff of interferential and confocal microscopes , 2008 .

[17]  K. Bewilogua,et al.  Industrial applications of HIPIMS , 2008 .

[18]  H. Streitberger,et al.  Automotive Paints and Coatings , 2008 .

[19]  Y. K. Chou,et al.  Characterizations of nano-crystalline diamond coating cutting tools , 2007 .

[20]  K. Chung,et al.  Wear characteristics of diamond-coated atomic force microscope probe. , 2007, Ultramicroscopy.

[21]  Pawel Pawlus,et al.  The effect of oil pockets size and distribution on wear in lubricated sliding , 2007 .

[22]  J. McDermid,et al.  Development of the surface structure of TRIP steels prior to hot-dip galvanizing , 2007 .

[23]  A. Matthews,et al.  A perspective on the optimisation of hard carbon and related coatings for engineering applications , 2007 .

[24]  Xicheng Wei,et al.  Influence of zinc electro-plated coating on dynamic tensile properties of TRIP-aided steels , 2007 .

[25]  Ke-wei Xu,et al.  X-ray diffraction measurement of residual stress and crystal orientation in Au/NiCr/Ta films prepared by plating , 2007 .

[26]  K. Oh,et al.  Wetting behaviours of a-C : H : Si : O film coated nano-scale dual rough surface , 2007 .

[27]  Ajay P. Malshe,et al.  A cBN-TiN composite coating for carbide inserts: Coating characterization and its applications for finish hard turning , 2006 .

[28]  Xinjian Feng,et al.  Design and Creation of Superwetting/Antiwetting Surfaces , 2006 .

[29]  Ajay P. Malshe,et al.  Tool wear and machining performance of cBN–TiN coated carbide inserts and PCBN compact inserts in turning AISI 4340 hardened steel , 2006 .

[30]  M. Keunecke,et al.  Thick c-BN coatings – Preparation, properties and application tests , 2006 .

[31]  L. Schäfer,et al.  The versatility of hot-filament activated chemical vapor deposition , 2006 .

[32]  S. Biehl,et al.  Multifunctional thin film sensors based on amorphous diamond-like carbon for use in tribological applications , 2006 .

[33]  M. Weber,et al.  Influence of different interlayers and bias voltage on the properties of a-C:H and a-C:H:Me coatings prepared by reactive d.c. magnetron sputtering , 2006 .

[34]  J. Davim,et al.  Cutting performance of time-modulated chemical vapour deposited diamond coated tool inserts during machining graphite , 2006 .

[35]  S. Matsumoto,et al.  Synthesis of c-BN films by using a low-pressure inductively coupled BF3–He–N2–H2 plasma , 2006 .

[36]  C. Ziebert,et al.  Constitution of thick oxygen-containing cubic boron nitride films , 2006 .

[37]  G. Barbezat.  Thermal Spray Coatings for Tribological Applications in the Automotive Industry , 2006, International Thermal Spray Conference.

[38]  T. Schmauder,et al.  Hard coatings by plasma CVD on polycarbonate for automotive and optical applications , 2006 .

[39]  A. Masuda,et al.  Present status and future feasibility for industrial implementation of Cat-CVD (Hot-Wire CVD) technology , 2006 .

[40]  Y. Funaki,et al.  Investigation of DLC-Si coatings in large-scale production using DC-PACVD equipment , 2006 .

[41]  M. Gelfi,et al.  Glancing-incidence X-ray diffraction for depth profiling of polycrystalline layers , 2006 .

[42]  C. Treutler.  Industrial use of plasma-deposited coatings for components of automotive fuel injection systems , 2005 .

[43]  Ajay P. Malshe,et al.  Cubic Boron Nitride (cBN) based nanocomposite coatings on cutting inserts with chip breakers for hard turning applications , 2005 .

[44]  G. Barbezat,et al.  Surface treatment selections for automotive applications , 2005 .

[45]  J. Hosson,et al.  Influence of energetic ion bombardment on W-C : H coatings deposited with W and WC targets , 2005 .

[46]  M. Dahlhaus.  Ein Qualitätssiegel für chrom(VI)-freien Korrosionsschutz , 2005 .

[47]  Klaus Holland-Letz,et al.  Aktuelle Entwicklungen bei Schichtsystemen für die Trockenbearbeitung. Recent developments in coating systems for dry machining , 2005 .

[48]  T. Cselle,et al.  Application of Coatings for Tooling Quo Vadis 2005? , 2005 .

[49]  Shui-Tong Lee,et al.  Deposition of thick cubic boron nitride films: The route to practical applications , 2005 .

[50]  G. Rauscher.  Neue chromfreie Vorbehandlungs-verfahren für Aluminium , 2005 .

[51]  G. Barucca,et al.  Characterization of silicon carbide thin films grown on Si and SiO2/Si substrates , 2004 .

[52]  Klaus Szielasko,et al.  Barkhausen noise and eddy current microscopy: a new scanning probe technique for microscale characterization of materials , 2004, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[53]  M. Smit,et al.  Effects of thermal and mechanical treatments on a titanium-based conversion coating for aluminium alloys , 2004 .

[54]  C. V. Cooper,et al.  Wear mechanism operating in W-DLC coatings in contact with machined steel surfaces , 2004 .

[55]  Roberto Roberti,et al.  Residual stress analysis of thin films and coatings through XRD2 experiments , 2004 .

[56]  K. Bewilogua,et al.  DLC based coatings prepared by reactive d.c. magnetron sputtering , 2004 .

[57]  Konstantinos-Dionysios Bouzakis,et al.  Properties and performance of high aluminum containing (Ti,Al)N based supernitride coatings in innovative cutting applications , 2003 .

[58]  Th. Lampe,et al.  Plasma surface engineering in the automotive industry—trends and future prospectives , 2003 .

[59]  A. Malshe,et al.  CBN-TiN Composite Coating Using a Novel Combinatorial Method—Structure and Performance in Metal Cutting , 2003 .

[60]  T. Stolarski.  Modern Tribology Handbook , 2003 .

[61]  W. Paatsch,et al.  Recent trends in surface finishing for automobile industry in Germany , 2003 .

[62]  S. Terauchi,et al.  Chrome-free surface treatments for magnesium alloy , 2003 .

[63]  A. Anders,et al.  Carbon thin film deposition using high power pulsed magnetronsputtering , 2003 .

[64]  Ulf Seyfert,et al.  Innovative steel strip coatings by means of PVD in a continuous pilot line: process technology and coating development , 2003 .

[65]  T. Makimōto,et al.  Photocatalytic, antifogging mirror , 2001 .

[66]  M. Dahlhaus.  Auf Hochglanz gebracht — galvanisierte Kunststoffe im Automobilbau , 2001 .

[67]  T. Morimoto,et al.  Wet chemical functional coatings for automotive glasses and cathode ray tubes , 2001 .

[68]  A. Dietz,et al.  Mikrokapseln in der Galvanotechnik , 2000 .

[69]  C. V. Cooper,et al.  Effect of target material on deposition and properties of metal-containing DLC (Me-DLC) coatings , 2000 .

[70]  M. Hans,et al.  High-volume PVD coating of precision components of large volumes at low process costs , 2000 .

[71]  J. M. Cuntz,et al.  Corrosion behaviour of zinc–nickel coatings, electrodeposited on steel , 2000 .

[72]  Peter Hing,et al.  Residual stress characterization of diamond-like carbon coatings by an X-ray diffraction method , 1999 .

[73]  J. Schneider,et al.  A novel pulsed magnetron sputter technique utilizing very high target power densities , 1999 .

[74]  Masao Murakawa,et al.  Performance of a rotating gear pair coated with an amorphous carbon film under a loss-of-lubrication condition , 1999 .

[75]  Niels Bay,et al.  Entrapment and escape of liquid lubricant in metal forming , 1999 .

[76]  Takeshi Morimoto,et al.  Ultraviolet ray absorbing coatings on glass for automobiles , 1999 .

[77]  J. J. Finley.  Heat treatment and bending of low-E glass , 1999 .

[78]  H. Brändle,et al.  New hard/lubricant coating for dry machining , 1999 .

[79]  Klaus Dr Nauenburg,et al.  Better aluminium mirrors by integrating plasma pretreatment, sputtering, and plasma polymerization for large-scale car headlight production , 1999 .

[80]  K. Bewilogua,et al.  Continuously deposited duplex coatings consisting of plasma nitriding and a-C:H:Si deposition , 1999 .

[81]  B. Karpuschewski,et al.  Influence of stress distribution on adhesion strength of sputtered hard coatings , 1998 .

[82]  A. Hieke,et al.  Variation of the wettability of DLC-coatings by network modification using silicon and oxygen , 1998 .

[83]  K. Matl,et al.  Plasma-ion-assisted deposition: a powerful technology for the production of optical coatings , 1997, Optics & Photonics.

[84]  Y. Taga.  Recent progress in coating technology for surface modification of automotive glass , 1997 .

[85]  Yanyang Yang,et al.  SAM study on plasma sprayed ceramic coatings , 1997 .

[86]  A. R. Schamel,et al.  Amorphous Carbon Coatings for Low Friction and Wear in Bucket Tappet Valvetrains , 1997 .

[87]  J. Meneve,et al.  Low friction and wear resistant a-C:H/a-Si1−xCx:H multilayer coatings , 1996 .

[88]  M. Gillies,et al.  Micromagnetic characteristics of single layer permalloy films in the nanometre range , 1995 .

[89]  G. Busse,et al.  Applications of phase sensitive thermography for nondestructive evaluation , 1994 .

[90]  S. S. Eskildsen,et al.  Engineering applications for diamond-like carbon , 1994 .

[91]  Y. Taga.  Recent progress of optical thin films in the automobile industry. , 1993, Applied optics.

[92]  W. C. Harbison,et al.  Protective Coatings for Automotive Transparent Plastic Glazing , 1993 .

[93]  G. Busse,et al.  Thermal wave imaging with phase sensitive modulated thermography , 1992 .

[94]  F. Warchol,et al.  Automated Application of Silicone Glass Like Coatings for Polycarbonate Headlamp Lenses , 1991 .

[95]  C. Klages,et al.  Microstructure and Physical Properties of Metal-Containing Hydrogenated Carbon Films , 1991 .

[96]  Y. Taga,et al.  Improvement of abrasion resistance of SiO(2)/TiO(2) multilayer interference filters. , 1989, Applied optics.

[97]  J. Svensson,et al.  Radiative cooling and frost formation on surfaces with different thermal emittance: theoretical analysis and practical experience. , 1987, Applied optics.

[98]  Niall R. Lynam,et al.  Electrochromic Automotive Day/Night Mirrors , 1987 .

[99]  R. L. Thomas,et al.  Mirage-effect measurement of thermal diffusivity. Part II: theory , 1986 .

[100]  Lawrence D. Favro,et al.  Mirage-effect measurement of thermal diffusivity. Part I: experiment , 1986 .

[101]  Svein Otto Kanstad,et al.  Experimental aspects of photothermal radiometry , 1986 .

[102]  Christian Bissieux,et al.  Analysis of semitransparent layered materials by modulated photothermal radiometry: application to the bonding and thickness control of enamel coatings , 1986 .

[103]  Michael Wright,et al.  Design advances and applications of the rotatable cylindrical magnetron , 1986 .

[104]  Allen Gersho,et al.  Theory of the photoacoustic effect with solids , 1975 .

[105]  F. W. Schlitter.  Die galvanische Vernicklung. R. Brugger. Eugen G. Leuze Verlag, Saulgau/Württ. 1967. 400 S. mit 100 Abb., Kunstdruckpapier, Halbleinen DM 40,– , 1967 .

[106]  Bernhard Karpuschewski,et al.  Magneto-abrasive machining for the mechanical preparation of high-speed steel twist drills , 2009 .

[107]  E. Uhlmann,et al.  Performance of diamond coated cutting tools as a function of material properties , 2008 .

[108]  Fritz Klocke,et al.  Steigerung der Leistungsfähigkeit PVD-beschichteter Hartmetallwerkzeuge durch Strahlbehandlung , 2008 .

[109]  J. M. Martín,et al.  New Trends in Boundary Lubrication of DLC Coatings , 2008 .

[110]  Agostino G. Bruzzone,et al.  Advances in engineered surfaces for functional performance , 2008 .

[111]  Jens Wegricht,et al.  Untersuchungen zur chrom(VI)freien Vorbehandlung für die Kunststoffgalvanisierung , 2007 .

[112]  Jürgen Unruh,et al.  Chromabscheidung aus wassrigen Elektrolyten Teil 14: Chrom(III) im Chromelektrolyten , 2007 .

[113]  Bernd Schuhmacher,et al.  Hochkorrosionsbestandige Oberflächen durch kombinierte Schichtsysteme , 2006 .

[114]  A. Miura,et al.  Flexible OLEDs for Automobiles using SiNx/CNx:H multi-layer Barrier Films and Epoxy Substrates , 2006 .

[115]  T. Dyllus.  Glanzchromelektrolyt auf Chrom(III)basis : chrom(VI)gleichwertig in Optik und Beständigkeit , 2006 .

[116]  M. J. Klopfstein,et al.  Photothermal Investigation of Ti-Cu-N and Ti-Ni-N PVD Films , 2006 .

[117]  Stefan Patzelt,et al.  Non-Destructive and Non-Contact Determination of Layer Thickness and Thermal Properties of PVD and Sol-Gel Layers by Photothermal Methods , 2004 .

[118]  F. Fontenay.  Electrodeposited zinc and zinc alloy coatings and their corrosion resistance. Part 1 , 2002 .

[119]  Bharat Bhushan,et al.  Modern tribology handbook, Volume 1 , 2001 .

[120]  M. Larsson,et al.  Mechanical and tribological requirements and evaluation of coating composites , 2001 .

[121]  A. Hieke,et al.  Verschleissfeste Antihaftschichten auf Basis modifizierter diamantähnlicher Kohlenstoffschichten , 2001 .

[122]  Hiroshi Oosaki,et al.  Development of hydrophilic outside mirror coated with titania photocatalyst , 2000 .

[123]  Bernhard Schmitz,et al.  Review of non-destructive measuring methods for the assessment of surface integrity : a survey of new measuring methods for coatings, layered structures and processed surfaces , 1999 .

[124]  Fritz Klocke,et al.  Coated Tools for Metal Cutting – Features and Applications , 1999 .

[125]  K. Taube,et al.  Carbon-based coatings for dry sheet-metal working , 1998 .

[126]  H. Morgner,et al.  Highly durable coatings for automotive polycarbonate glazing , 1998 .

[127]  K. Maier,et al.  ZYLINDERLAUFFLACHEN IM MODERNEN MOTORENBAU , 1996 .

[128]  Gert Goch,et al.  Contactless Surface Measurement with a New Acoustic Sensor , 1994 .

[129]  R. Bunshah.  Handbook of deposition technologies for films and coatings , 1994 .

[130]  W. König,et al.  New Approaches to Characterizing the Performance of Coated Cutting Tools , 1992 .

[131]  C A Bennett,et al.  Thermal wave interferometry: a potential application of the photoacoustic effect. , 1982, Applied optics.