Analysis of technological process of installation turbochargers

The technological process of installation of turbocharger as well as detailed analysis of chosen stages of installation having fundamental influence on the correct work of the turbocharger are presented in the article. The purpose of this article is performance of whole process of installation turbocharger as well as analysis of particularly significant stages of this process.The creature of turbocharging and it is myself this of working of turbocharger is enough simple. Difficulties appear if we put to the analysis conditions work of turbocharger: high temperature of fumes, variable loads, aggressive environment of combustion gases, high rotatory speeds of rotors. Some of exploitation problems are possible to the elimination on the design stage or by means of application of appropriate materials. However technological process of installation is responsible for output quality and failurefree lasting work of turbocharger. In the process of installation it can distinguish some essential stages: processing and installation of shaft with the turbine’s rotor, the weighing of turbine’s rotor and the compressor, the installation of rotor’s group, weighing of rotor’s group in the trunk, positional tests under load. High rotatory speeds cause during work of rotator so that created during of installation of turbocharger inappropriate balancings can bring to important damages of turbocharger. The correct course of process of installation and the final verification on braked position allows to avoid most of breakdowns of turbocharger group as well as to ensure long term of correct exploitation.From this reason very important is detailed analysis of respective stages of installation of group.