Energetic optimization of the performances of a hot air engine for micro-CHP systems working with a Joule or an Ericsson cycle

The micro combined heat and electrical power systems (micro-CHP) with hot air engines are well adapted for solid biomass upgrading, in particular, the Ericsson engines working with an open cycle and an external combustion. This paper presents a model of an Ericsson engine with a compression and an expansion cylinder which allows a thermodynamic optimization of the engine performances in a global approach. A sensitive analysis on the influent parameters is carried out in order to determine the optimal working conditions of the engine: temperature and pressure range, expansion cycle shape with a late intake valve closing or an early exhaust valve closing, heat transfers through the wall of the cylinders. This study, focused on thermodynamic aspects, is a first step in the design of an Ericsson engine.

[1]  Mauro Reini,et al.  Optimal lay-out and operation of combined heat & power (CHP) distributed generation systems , 2009 .

[2]  Anthony Paul Roskilly,et al.  Reciprocating Joule-cycle engine for domestic CHP systems , 2005 .

[3]  Erich Podesser.  Electricity production in rural villages with a biomass Stirling engine , 1999 .

[4]  Pascal Stouffs,et al.  Dynamic simulation of a small modified Joule cycle reciprocating Ericsson engine for micro-cogeneration systems , 2013 .

[5]  Somchai Wongwises,et al.  A review of solar-powered Stirling engines and low temperature differential Stirling engines , 2003 .

[6]  Marija Mandic,et al.  Possibilities of implementation of CHP (combined heat and power) in the wood industry in Serbia , 2012 .

[7]  Can Çinar,et al.  Beta-type Stirling engine operating at atmospheric pressure , 2005 .

[8]  Pascal Stouffs,et al.  Modeling of the Ericsson engine , 2014 .

[9]  Paulien M. Herder,et al.  Uncertainties in the design and operation of distributed energy resources: The case of micro-CHP systems , 2008 .

[10]  Jerzy Wojewoda,et al.  Numerical model and investigations of the externally heated valve Joule engine , 2010 .

[11]  Bruno Peuportier,et al.  Experimental characterization, modeling and simulation of a wood pellet micro-combined heat and power unit used as a heat source for a residential building , 2010 .

[12]  M. A. Bell,et al.  Thermodynamic design of a reciprocating Joule cycle engine , 2003 .

[13]  Abdou Touré,et al.  Étude théorique et expérimentale d'un moteur Ericsson à cycle de Joule pour conversion thermodynamique de l'énergie solaire ou pour micro-cogénération. , 2010 .

[14]  Jincan Chen,et al.  The comprehensive influence of several major irreversibilities on the performance of an Ericsson heat engine , 1999 .

[15]  S. C. Kaushik,et al.  Finite time thermodynamic evaluation of irreversible Ericsson and Stirling heat engines , 2001 .

[16]  M. Feidt,et al.  The effect of the overall heat transfer coefficient variation on the optimal distribution of the heat transfer surface conductance or area in a Stirling engine , 1998 .

[17]  Pascal Stouffs,et al.  Energy, exergy and cost analysis of a micro-cogeneration system based on an Ericsson engine , 2005 .

[18]  Ashok Misra,et al.  Performance analysis of an Organic Rankine Cycle with superheating under different heat source temperature conditions , 2011 .

[19]  Can Çinar,et al.  Manufacturing and testing of a gamma type Stirling engine , 2005 .

[20]  Ingwald Obernberger,et al.  Operating Experiences with a Small-scale CHP Pilot Plant based on a 35 kWel Hermetic Four Cylinder Stirling Engine for Biomass Fuels , 2003 .