Discrimination of coatings on wooden materials using the gas sensor system.

The applicability of sensor system for the discrimination of sources of indoor pollution was investigated. As examples of indoor pollution sources, paint and lacquer coatings were considered. Commercially available preparations: Akrylux, Doamlux, Bejca and White Scandinavian were selected for headspace measurements using TGS sensor array. Following issues were investigated: (1) discrimination between water- and solvent-based coatings, (2) discrimination between one component coatings, and (3) discrimination between one component and two component coatings. Following data analysis methods were used: principal component analysis (PCA), linear discriminant analysis (LDA) and probabilistic neural network (PNN). Results showed that coatings could be discriminated successfully, provided the surface covered was solid wood (0-1.8% error). The interference of fibreboard volatiles in sensor measurements of coatings was most likely encountered. It could have significantly impaired discrimination of coatings on fibreboard (2.8-5.6% error) as compared to wood. Worst results were obtained for the discrimination of coatings on unknown material(12.5-28.7% error).