High conductivity PEDOT resulting from glycol/oxidant complex and glycol/polymer intercalation during vacuum vapour phase polymerisation

Abstract Vacuum vapour phase polymerisation (V-VPP) was used to synthesis high conductivity poly(3,4-ethylenedioxythiophene) (PEDOT) on glycol/oxidant coated substrates. Thermo gravimetric analysis (TGA) indicated that up to 15 wt.-% glycol was able to complex with the Fe(Tos) 3 oxidant solution and that this loading produced PEDOT with the highest conductivity, namely 1487 S cm −1 . Further addition beyond 15 wt.-% resulted in an unbounded excess of glycol which appeared to inhibit the polymerisation process, resulting in reduced doping levels and conductivity. XPS data showed that glycol was incorporated within the PEDOT matrix after polymer synthesis, and that this may contribute to the high conductivity achieved using the V-VPP technique. XPS data also confirmed that the highest conductivity coincided with the highest recorded doping level, d  = 28.4%.

[1]  A. Maldonado,et al.  Physical properties of ZnO:F obtained from a fresh and aged solution of zinc acetate and zinc acetylacetonate , 2006 .

[2]  S. Kirchmeyer,et al.  Scientific importance, properties and growing applications of poly(3,4-ethylenedioxythiophene) , 2005 .

[3]  Yang Yang,et al.  On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film through solvent treatment , 2004 .

[4]  G. Wallace,et al.  Vapor-phase polymerization of pyrrole and thiophene using iron (III) sulfonates as oxidizing agents , 2004 .

[5]  Manrico Fabretto,et al.  Improved PEDOT Conductivity via Suppression of Crystallite Formation in Fe(III) Tosylate During Vapor Phase Polymerization , 2008 .

[6]  Peter J. Murphy,et al.  In-situ QCM-D analysis reveals four distinct stages during vapour phase polymerisation of PEDOT thin films , 2010 .

[7]  J. Nam,et al.  Surface smoothness and conductivity control of vapor-phase polymerized poly(3,4-ethylenedioxythiophene) thin coating for flexible optoelectronic applications , 2008 .

[8]  R. Corradi,et al.  Chemical synthesis of poly(3,4-ethylenedioxythiophene) , 1997 .

[9]  J. Nam,et al.  Preparation of PEDOT/Cu composite film by in situ redox reaction between EDOT and copper(II) chloride , 2008 .

[10]  E. Olivetti,et al.  Doping level and work function control in oxidative chemical vapor deposited poly (3,4-ethylenedioxythiophene) , 2007 .

[11]  Alexis Laforgue,et al.  Production of Conductive PEDOT Nanofibers by the Combination of Electrospinning and Vapor-Phase Polymerization , 2010 .

[12]  D. Beljonne,et al.  Modeling of the solid-state packing of charged chains (PEDOT) in the presence of the counterions (TSA) and the solvent (DEG) , 2008 .

[13]  Peter J. Murphy,et al.  The role of water in the synthesis and performance of vapour phase polymerised PEDOT electrochromic devices , 2009 .

[14]  D. Beljonne,et al.  Atomic scale modeling of interfacial structure of PEDOT/PSS , 2009 .

[15]  Ingemar Lundström,et al.  Chemical vapour deposition (CVD) of conducting polymers: Polypyrrole , 1986 .

[16]  K. Gleason,et al.  Oxidative Chemical Vapor Deposition of Electrically Conducting Poly(3,4-ethylenedioxythiophene) Films , 2006 .

[17]  Ping Chen,et al.  Effects of poly(ethylene glycol) on electrical conductivity of poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonic acid) film , 2005 .

[18]  Michael Müller,et al.  Influence of PEG-ran-PPG Surfactant on Vapour Phase Polymerised PEDOT Thin Films. , 2009, Macromolecular rapid communications.

[19]  Donal D. C. Bradley,et al.  Fabrication of Highly Conductive Poly(3,4‐ethylenedioxythiophene) Films by Vapor Phase Polymerization and Their Application in Efficient Organic Light‐Emitting Diodes , 2007 .

[20]  Dong‐Won Kim,et al.  Effects of various imidazole-based weak bases and surfactant on the conductivity and transparency of poly(3,4-ethylenedioxythiophene) films , 2009 .

[21]  S. D. Vos,et al.  Chemical and thermal treatment of PEDOT:PSS thin films for use in organic light emitting diodes , 2004 .

[22]  Daewon Sohn,et al.  Fabrication and characterization of conductive polypyrrole thin film prepared by in situ vapor-phase polymerization , 2003 .

[23]  F. Krebs,et al.  High-conductivity large-area semi-transparent electrodes for polymer photovoltaics by silk screen printing and vapour-phase deposition , 2006 .

[24]  F. Chen,et al.  High‐Conductivity Poly(3,4‐ethylenedioxythiophene):Poly(styrene sulfonate) Film and Its Application in Polymer Optoelectronic Devices , 2005 .

[25]  Brett D. Martin,et al.  Hydroxylated secondary dopants for surface resistance enhancement in transparent poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonate) thin films , 2004 .

[26]  Martijn Kemerink,et al.  Conductivity, work function, and environmental stability of PEDOT:PSS thin films treated with sorbitol , 2008 .

[27]  K. Abboud,et al.  Conformational locking for band gap control in 3,4-propylenedioxythiophene based electrochromic polymers. , 2006, Chemical communications.

[28]  J. Brédas,et al.  Density functional theory and Hartree–Fock studies of the geometric and electronic structure of neutral and doped ethylenedioxythiophene (EDOT) oligomers , 2003 .

[29]  A. MacDiarmid,et al.  Apparent dependence of conductivity of a conducting polymer on an electric field in a field effect transistor configuration , 2002 .

[30]  S. Armes.  Optimum reaction conditions for the polymerization of pyrrole by iron(III) chloride in aqueous solution , 1987 .

[31]  K. West,et al.  Stability of highly conductive poly-3,4-ethylene-dioxythiophene , 2006 .

[32]  O. Inganäs,et al.  Nano-structured conducting polymer network based on PEDOT-PSS , 2001 .

[33]  Jin-Ho Choy,et al.  Electrochromic device of PEDOT–PANI hybrid system for fast response and high optical contrast , 2009 .

[34]  Brett D. Martin,et al.  Towards a Transparent, Highly Conductive Poly(3,4‐ethylenedioxythiophene) , 2004 .

[35]  Leone Spiccia,et al.  Vapour-phase polymerization of pyrrole and 3,4-ethylenedioxythiophene using iron(III) 2,4,6-trimethylbenzenesulfonate , 2009 .

[36]  George G. Malliaras,et al.  Enzymatic sensing with organic electrochemical transistors , 2008 .

[37]  J. Reynolds,et al.  Spray‐Processable Blue‐to‐Highly Transmissive Switching Polymer Electrochromes via the Donor–Acceptor Approach , 2010, Advanced materials.

[38]  Youngson Choe,et al.  Improving Efficiency of Organic Photovoltaic Cells Using PEDOT:PSS and MWCNT Nanocomposites as a Hole Conducting Layer , 2010 .

[39]  José A. Pomposo,et al.  All-plastic electrochromic devices based on PEDOT as switchable optical attenuator in the near IR , 2008 .

[40]  Jae Hoon Jung,et al.  Enhancement of electrical conductivity of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents , 2002 .

[41]  William R. Salaneck,et al.  Characterization of the PEDOT-PSS system by means of X-ray and ultraviolet photoelectron spectroscopy , 1999 .

[42]  Keld West,et al.  Vapor-Phase Polymerization of 3,4-Ethylenedioxythiophene: A Route to Highly Conducting Polymer Surface Layers , 2004 .

[43]  Cristian Ionescu-Zanetti,et al.  Semiconductive Polymer Blends: Correlating Structure with Transport Properties at the Nanoscale , 2004 .

[44]  W. Knoll,et al.  Electropolymerization of ethylene dioxythiophene (EDOT) in micellar aqueous solutions studied by electrochemical quartz crystal microbalance and surface plasmon resonance , 2005 .

[45]  Jaegab Lee,et al.  Effects of the FeCl3 concentration on the polymerization of conductive poly(3,4-ethylenedioxythiophene) thin films on (3-aminopropyl) trimethoxysilane monolayer-coated SiO2 surfaces , 2009 .

[46]  F. Touwslager,et al.  Morphology and conductivity of PEDOT/PSS films studied by scanning-tunneling microscopy , 2004 .

[47]  W. Xu,et al.  High‐Performance, Low‐Operating‐Voltage Organic Field‐Effect Transistors with Low Pinch‐Off Voltages , 2008 .

[48]  D. Briggs,et al.  High Resolution XPS of Organic Polymers: The Scienta ESCA300 Database , 1992 .

[49]  TaeYoung Kim,et al.  Electronic, chemical and structural change induced by organic solvents in tosylate-doped poly(3,4-ethylenedioxythiophene) (PEDOT-OTs) , 2005 .

[50]  S. Armes,et al.  Surface characterization of poly(3,4-ethylenedioxythiophene)-coated latexes by X-ray photoelectron spectroscopy , 2000 .

[51]  Keld West,et al.  Base inhibited oxidative polymerization of 3,4-ethylenedioxythiophene with iron(III)tosylate , 2005 .

[52]  Sung Gap Im,et al.  Systematic control of the electrical conductivity of poly(3,4-ethylenedioxythiophene) via oxidative chemical vapor deposition , 2007 .

[53]  Mats Andersson,et al.  Polymer Photovoltaic Cells with Conducting Polymer Anodes , 2002 .

[54]  J. Beery,et al.  Conducting polymer-colloidal silica composites , 1991 .