An overview of the modified chemical vapor deposition (MCVD) process and performance

This paper reviews the MCVD process, with special emphasis on fiber design and material choices, understanding of mechanisms involved in the process, process improvements, and performance.

[1]  T. Akamatsu,et al.  Fabrication of graded‐index fibers without an index dip by chemical vapor deposition method , 1977 .

[2]  David N. Payne,et al.  Measurement of profile dispersion in optical fibres: a direct technique , 1977 .

[3]  Kazuaki Yoshida,et al.  Fabrication of a 100-km graded-index fiber from a continuously consolidated VAD preform , 1981 .

[4]  H. Murata,et al.  Low-loss single-mode fiber development and splicing research in Japan , 1981 .

[5]  K. L. Walker,et al.  Reduced cycle time MCVD fiber fabrication , 1981 .

[6]  J. Irven,et al.  Measurements on waveguide properties of GeO2-SiO2-cored optical fibres , 1974 .

[7]  P. Schultz.  Optical Absorption of the Transition Elements in Vitreous Silica , 1974 .

[8]  A. David Pearson.  Fabrication of single-mode fiber at high rate in very long lengths for submarine cable , 1981 .

[9]  J. D. Rush,et al.  Interplay of design parameters and fabrication conditions on the performance of monomode fibers made by MCVD , 1981 .

[10]  P. B. Macedo,et al.  Rayleigh and Brillouin Scattering in K2O–SiO2 Glasses , 1973 .

[11]  S. C. Mettler,et al.  A loss model for parabolic-profile fiber splices , 1978, The Bell System Technical Journal.

[12]  D. Gloge,et al.  Dispersion in weakly guiding fibers. , 1971, Applied optics.

[13]  D. S. Shenk,et al.  Strength characterization of multikilometer silica fibers , 1981 .

[14]  D. H. Smithgall,et al.  Automatic detection and centering of fibers in coatings , 1981 .

[15]  J. Macchesney,et al.  The preparation of optical waveguide preforms by plasma deposition , 1978, The Bell System Technical Journal.

[16]  I. Malitson.  Interspecimen Comparison of the Refractive Index of Fused Silica , 1965 .

[17]  N. Imoto,et al.  Wavelength dispersion characteristics of single-mode fibers in low-loss region , 1980, IEEE Journal of Quantum Electronics.

[18]  D. Marcuse,et al.  Calculation of bandwidth from index profiles of optical fibers. 1: Theory. , 1979, Applied Optics.

[19]  Bj Ainslie,et al.  Water impurity in low-loss silica fibre , 1977 .

[20]  K. Walker,et al.  Thermophoretic Deposition of Small Particles in the Modified Chemical Vapor Deposition (MCVD) Process , 1980 .

[21]  D. L. Wood,et al.  Partition of Hydrogen in the Modified Chemical Vapor Deposition Process , 1981 .

[22]  R. G. Sommer,et al.  New glass system for low-loss optical waveguides , 1976 .

[23]  F. Stone,et al.  Added optical loss in graded-index germanium-phosphosilicate-core fibers caused by UV irradiation , 1980 .

[24]  M. Saifi,et al.  Effect of deposition rate on spectral loss of GeO2-P2O5-SiO2 graded index fibres , 1980 .

[25]  E. Friebele.  Optical Fiber Waveguides In Radiation Environments , 1979 .

[26]  P. Simpkins,et al.  Thermophoresis: The mass transfer mechanism in modified chemical vapor deposition , 1979 .

[27]  Tingye Li,et al.  Part II: Devices and systems considerations , 1973 .

[28]  J. Fleming,et al.  Material dispersion in lightguide glasses , 1978 .

[29]  R Olshansky.  Distortion losses in cabled optical fibers. , 1975, Applied optics.

[30]  D. Gloge.  Weakly guiding fibers. , 1971, Applied optics.

[31]  E. A. J. Marcatili,et al.  Multimode theory of graded-core fibers , 1973 .

[32]  L. L. Blyler,et al.  Fiber drawing, coating, and jacketing , 1980, Proceedings of the IEEE.

[33]  D. Wood,et al.  Investigation of the reactions of SiCl4 and O2 at elevated temperatures by infra-red spectroscopy , 1978 .

[34]  M. Horiguchi,et al.  OH-ion distribution profiles in rod preforms of high-silica optical waveguide , 1977 .

[35]  Y. Ohmori,et al.  Optimum profile parameter on graded-index optical fibre at 1.27 μm wavelength , 1978 .

[36]  Influence of the purity of reactants on the attenuation of CVD made doped silica optical fibers , 1980 .

[37]  M. Saifi,et al.  Incorporation of OH in Glass in the MCVD Process , 1979 .

[38]  K. Nassau.  The diffusion of water in optical fibers , 1978 .

[39]  F. W. Ostermayer,et al.  Low‐loss silica core‐borosilicate clad fiber optical waveguide , 1973 .

[40]  B. Ainslie,et al.  Optimised structure for preparing long ultra-low-loss single-mode fibres , 1980 .

[41]  T. Izawa,et al.  Effect of dopants on transmission loss of low-OH-content optical fibres , 1976 .

[42]  Tingye Li,et al.  Research toward optical-fiber transmission systems , 1973 .

[43]  Tomoo Yanase,et al.  Optical absorption characteristics of hydroxyl radicals in phosphorus-containing silica glass , 1977 .

[44]  Jay R. Simpson,et al.  UV-Radiation induced losses in optical fibers and their control , 1980 .

[45]  Y. Ohmori,et al.  Spectral loss characteristics of GeO2-P2O5-doped silica graded-index fibres in long-wavelength band , 1979 .

[46]  Shigeyuki Seikai,et al.  Optimum design of graded-index fiber structure , 1979 .

[47]  T. Akamatsu,et al.  Fabrication of long fibers by an improved chemical vapor deposition method (HCVD method) , 1977 .

[48]  D. Keck,et al.  On the ultimate lower limit of attenuation in glass optical waveguides , 1973 .

[49]  P. Lemaire,et al.  An improved single mode fiber design, exhibiting low loss, high bandwidth and tight mode confinement simultaneously , 1981, IEEE Journal of Quantum Electronics.

[50]  L. Cohen,et al.  Tailoring the shapes of dispersion spectra to control bandwidths in single-mode fibers. , 1982, Optics letters.

[51]  D. Gloge,et al.  Propagation Effects in Optical Fibers , 1975 .

[52]  J. Kirchhof,et al.  A hydrodynamic theory of the collapsing process for the preparation of optical waveguide preforms , 1980 .

[53]  K. Kao,et al.  Dielectric-fibre surface waveguides for optical frequencies , 1966 .

[54]  A. C. Hart,et al.  High Strength Furnace-Drawn Optical Fibers , 1979 .

[55]  H. Lydtin,et al.  Low‐loss optical fibers prepared by plasma‐activated chemical vapor deposition (CVD) , 1976 .

[56]  David N. Payne,et al.  Determination of the wavelength of zero material dispersion in optical fibres by pulse-delay measurements , 1977 .

[57]  M. Horiguchi,et al.  Spectral losses of low-OH-content optical fibres , 1976 .

[58]  T. Izawa,et al.  Materials and processes for fiber preform fabrication—Vapor-phase axial deposition , 1980, Proceedings of the IEEE.

[59]  Kazuaki Yoshida,et al.  Ultra wide bandwidth v.a.d. fibre , 1980 .

[60]  D. A. Pinnow,et al.  Borosilicate glasses for fiber optical waveguides , 1973 .

[61]  U C Paek,et al.  High speed coating of optical fibers with UV curable materials at a rate of greater than 5 m/sec. , 1981, Applied optics.

[62]  E. A. J. Marcatili,et al.  Modal dispersion in optical fibers with arbitrary numerical aperture and profile dispersion , 1977, The Bell System Technical Journal.

[63]  G. William Tasker,et al.  Low‐loss fused silica optical waveguide with borosilicate cladding , 1973 .

[64]  L. Cohen,et al.  Pulse delay measurements in the zero-material-dispersion region for germanium- and phosphorus-doped silica fibres , 1978 .

[65]  K. Inada,et al.  A new graphical method relating to optical fiber attenuation , 1976 .

[66]  J. Irven.  Long wavelength performance of SiO2/GeO2/P2O5 core fibres with different P2O5 levels , 1981 .

[67]  Herman M. Presby,et al.  A new technique for the preparation of low-loss and graded-index optical fibers , 1974 .

[68]  T. Miya,et al.  Ultimate low-loss single-mode fibre at 1.55 μm , 1979 .

[71]  R. Olshansky,et al.  Pulse broadening in graded-index optical fibers. , 1976, Applied optics.

[72]  P. Kaiser,et al.  Spectral losses of unclad fibers made from high‐grade vitreous silica , 1973 .

[73]  David N. Payne,et al.  New silica-based low-loss optical fibre , 1974 .

[74]  P. Kaiser,et al.  Drawing-induced coloration in vitreous silica fibers , 1974 .

[75]  J. A. Lewis.  The collapse of a viscous tube , 1977 .

[76]  T. P. Lee,et al.  Measuring high-bandwidth fibres in the 1.3 μm region with picosecond ingaasp injection lasers and ultrafast ingaas detectors , 1981 .

[77]  Y. Ohmori,et al.  Profile dispersion characteristics in high-bandwidth graded-index optical fibers. , 1980, Applied optics.

[78]  N. Shibata,et al.  Optical attenuation in pure and doped fused silica in the ir wavelength region , 1977 .

[79]  D. Powers.  Kinetics of Sicl4 Oxidation , 1978 .

[80]  M. Cohen.  Progress in multimode and single-mode lightguides prepared by the MCVD process , 1981, IEEE Journal of Quantum Electronics.

[81]  J. Macchesney,et al.  Large-core high n.a. fibres for data-link applications , 1977 .

[82]  K. Walker,et al.  Consolidation of Participate Layers in the Fabrication of Optical Fiber Preforms , 1980 .

[83]  I P Kaminow,et al.  Binary silica optical fibers: refractive index and profile dispersion measurements. , 1976, Applied optics.

[84]  R. B. Runk.  A ZIRCONIA INDUCTION FURNACE FOR DRAWING PRECISION SILICA WAVE GUIDES , 1977 .

[85]  J. Kirchhof,et al.  About the oxidation of SiCl4 and GeCl4 in homogeneous gaseous phase , 1980 .

[86]  David N. Payne,et al.  Optical fibres based on phosphosilicate glass , 1976 .

[87]  D. Payne,et al.  Zero material dispersion in optical fibres , 1975 .

[88]  Shoichi Sudo,et al.  Fabrication of completely OH-free v.a.d. fibre , 1980 .

[89]  Chinlon Lin,et al.  Pulse delay measurements in the zero material dispersion wavelength region for optical fibers. , 1977, Applied optics.

[90]  P.C. Schultz,et al.  Fabrication of optical waveguides by the outside vapor deposition process , 1980, Proceedings of the IEEE.

[91]  W. French,et al.  Chemical kinetics of the reactions of tetrachlorosilane, tetrabromosilane, tetrachlorogermane, phosphoryl chloride, and trichloroborane with oxygen , 1978 .

[92]  Improved chemical vapour deposition method for long-length optical fibre , 1978 .

[93]  U. Paek,et al.  A rigorous numerical solution to Maxwell's equation for lightguides , 1980 .

[94]  George M. Homsy,et al.  Thermophoretic deposition of small particles in laminar tube flow , 1979 .

[95]  J. Fleming,et al.  Material and Mode Dispersion in GeO2·B2O3·SiC2 Glasses , 1976 .

[96]  Dietrich Marcuse,et al.  Chapter 3 – Guiding Properties of Fibers , 1979 .

[97]  Kazuaki Yoshida,et al.  Low-loss fibre prepared under high deposition rate by modified c.v.d. technique , 1977 .

[98]  D. H. Smithgall.  On the control of the fiber drawing process , 1979 .